De-noise on iPhoto not working with Canon camera pictures

When I try to use the de-noise option in iPhoto on some pictures taken with a professional camera (Canon), it does not de-noise the picture.
I tried diffrent stuff to see what works and what does not:
- If I use a picture taken from iPhone / iPad, in iPhoto de-noise works
- If I take a professional picture, send it to my iPhone and resend it on my Mac, the de-noise will work
- If I use a professional picture on my Mac desktop, de-noise works as well.
Just not in that initial circumstance ... Strange !! Help ?!

How does this
When I try to use the de-noise option in iPhoto on some pictures taken with a professional camera (Canon), it does not de-noise the picture
differ from this?
- If I use a professional picture on my Mac desktop, de-noise works as well.
OT

Similar Messages

  • Macbook pro is not working with Canon pixma iP1500, but has previously.  The printer works with an old PC without trouble.  "printer is offline" message when this printer is plugged into macbook.  Any clues to get it to work?

    Macbook pro is not working with Canon pixma iP1500 but has previously.  Printer works with an old PC but macbook shows "printer is offline".  Any clues?

    Hello Betty7,
    Please let me take a moment to say "Welcome" to the HP Forums.
    I hope you enjoy your experience!
    I see that you are having an issue with getting the printer reinstalled. 
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

    My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

    I had the same problem. I make my AF work going to Menu / AF mode and selected Live mode. On Quick mode the AF did not work. I change the settings without realise it. Now my AF is working fine.

  • Camera connection not working with my camera

    Camera connect not working with my Sony boggie camera

    The Bloggie will not work because it draws too much power from the USB port on the iPad.  The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory.  Works fine with my 3D Bloggie.

  • Image Capture not working with Canon LiDE 500F

    Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
    Regardless the resolution, the resulted file has a very small size.
    As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
    As for other reports, CanoScan Toolbox works properly.
    Regards,
    Liviu

    Hello Liviu,
    There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
    http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
    As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
    I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
    Pahu

  • WHY FCS WILL NOT WORK WITH CANON XH A1, NOW, EVER, ANYTIME? HELLOOO APPLE?

    Well well. Trillions of dollars in Apple technology and canon ingenuity and yet these two behemoths of electronics and computer commercialism cannot create a simple easy to sue interface for a freaking Canon XH A1 camera. I have read forums, googled "compatibility issues", talked to friends, emailed people, and yet no one has stepped up with any assistance in this matter. What really hacks me off is that after spending thousands of dollars on Apple products, and numerous combinations of Final Cut Express, Pro, Studio, I have spent the better part of two weeks doing fresh installs, plugging fire wire cables in each and every port, trying numerous Canon cameras, and still, here at 633 am after all of this, my wonderfully complex Final Cut Studio now tells me that although it "knows" a camera is connected via fire wire, it does not recognize and will not initialize my camera. Furthermore, earlier this week when it DID recognize my camera, the video imported was forced to create clips which stopped a meaningless in and out points. In addition, the audio drifted from one second, to 1.5 seconds, and so on and so forth. Ladies,gentlemen, scribes, aficionados, and causal observers here this: I am officially fed up with having to work harder at getting my project ready to edit, than I ever did actually editing the project. This is sad, sick, silly and stupid. I don't know what's next blokes. Vegas Pro? Avid? I am just worn out by the numerous fixes, upgrades, work around, plug ins filters and tech experts who still can't tell me why Final Cut Studio will not simply let me import my freaking video. I'm done with this silliness. Goodbye Apple! Goodbye Final Cut! I have better things to do with my life than researching subjects that have more contradictions than a rubics cube. i am going to get some sleep, spend time with my wife, and get some fresh air. I hope my apple implodes, and I'll use the FCP disks for coasters when I am sipping my cold brew. ARGGGGGGHHHHHHHHH!

    i jsut came across your posting. I have never replied to a posting before but i am in your case. I use the saem camera you do and had the same problems you are facing with your setup. I spent days and hours trying to figure out my problems. Finaly i read that you could reset the camera. And I did and it worked. Open the view finder on top of the camera and you will see the tiny reset hole. Stick a pin in there for around 15 seconds and that should reset it back to the factory settings. I think you have played with too many settings on the camera and it is jumbled this is waht happend to me. then go into final cut, but do not attatch your camera yet and click on the EASY set up tab and set your importing to match what ever you shot your video at. You cannot 60i video on a 30f setting they have to be the same.
    Alex
    P.S.
    Please look at your manual for reseting your camera, I am just going off memory and it has been two years when I reset mine. Here is some of the video I have shot with my Canon(W/Final Cut) Click onh the HD button if you have a fast connection.
    http://www.youtube.com/watch?v=7g-p-Ok5uJw&feature=channel_page

  • Mac will not work with Canon EOS cameras

    My imac OS X 10.6 is not working well with my Canon EOS 5d Mark II camera on the tethered mode. The camera works well with other Mac computers, and I have spent hours with Canon tech help. It now seems that the issue may be with the computer. The EOS Utility is working, everything has been updated, all Canon checkpoints look good, but when I use the camera, the image does not transfer. And then everything gets locked into a loop and I have to crash the camera and force quit the program. Is there something in the computer that may be blocking the transfers? any ideas where to look? Canon has done everything on the camera side, but I don't know where to begin with the computer.

    OH, ok. So the issue is with transferring the image from the camera to the computer. Since you said you have done everything possible with canon, the camera's firmware is completely up to date, you have the correct software installed. Since you say no cameras work with this computer I am inclined to say the problem is from the computer, which is why the problem exists. I'd do an apple hardware test and see if anything turns up. Clean install of the canon software would also be a good idea.

  • Camera Connection Kit not working with Canon G12

    Hi there,
    I was wondering if anyone can help me...
    I just purchased the iPad Camera Connection Kit and when I plugged both the SD card and USB connectors in with the appropriate divices connected, and turned on, neither worked. Absolutely nothing happens.
    My iPad picks up the CCK in the 'about' section in Settings but the Photo App did not load when the connectors where in. I am thinking it has something to do with my camera/SD card
    Information:
    iPad - Generation 1, Version 5.1.1, 16GB
    Camera - Canon G12 Power Shoot. It has Picture Transfer Protocol
    SD card - SanDisk SDHC card 4GB
    Also, the camera saves the photo files in the DCIM folder with 8 characters, e.g. IMG_1234
    Any help would be greatly appreaciated.
    Many thanks,
    CJ

    I cannot find these settings anywhere on my camera or in the manual.
    I had to do some searching on the internet just to find out it had picture transfer protocol. I am struggling to find answers about the G12's PTP or Mass Storage.
    Sorry...

  • Airplay not working with canon mx456

    i can not get my canon mx456 to connect to my ipad air i will work off my laptop but will not connect to the ipad can any one help or have any tips too get it working?
    thanks

    AirPrint?
    Have you tried the troubleshooting steps from the AirPrint Knowledgebase page:
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.Notes:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.

  • Iphoto not working with screen saver

    Ever since I upgrade to 10.6.2, my screen saver will not allow me to use pictures in iphoto. When I click on a folder to use, it gives me a message "unable to use iphoto please contact vendor for screen saver upgrade" or very close to that. HUH? Isn't apple my vendor for both? Any ideas on how to go back to using my photos as my screen saver?

    My guess is that ILMediaBrowser is referring to the iLife Media Browser. You might run Software Update and see if you somehow missed an update to it. However, if it worked with a new iPhoto Library I think the iLife Media Browser is probably OK, but there is something funky in the innards of your original iPhoto Library that is crashing the Media Browser.
    You could try holding the Command and Option keys down, then launch iPhoto from the Applications folder. Keep holding the keys until it asks you if you want to rebuild. There are list of items to be checked, click on the ones that sound likely to help matters.
    Francine
    Francine
    Schwieder

  • Camera Connection Kit Not Working with Canon Rebel

    Using the connection and the Canon Rebel SRLD, I was not able to transfer pictures to the iPad.
    I was able to transfer pictures using the memory card.
    Not able to transfer pictures from the 3G iPhone.
    Should I take the connection kit, the camera, and the iPad to an Apple store to see why it's not working, or does anyone have any solutions.
    Thanks,

    The cameras connection kit does not support the iPhone 3G.
    http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc0Njk4NzU#ov erview
    It does however supports both the iPhone 3GS and 4.

  • Iphoto not working with OS X

    Hello! I recently updated my operating system on my MacBook Pro to the Maverick OS X and ever since I did that, I am not able to open iPhoto, I receive this message: "You can’t use this version of the application “iPhoto” with this version of OS X.You have “iPhoto” 9.2.3." Can you please help me make iPhoto work again?
    Thank you!

    You need to backup your iPhoto library and go to the App store and update to iPhoto '11 version 9.5 - a free upgrade if you own any version of iPhoto '11 which you do - version 9.2.3 is an oldr version of ihoto '11
    LN

  • Iphoto quit working with Canon Rebel T4i

    Greetings,
    I am running a late 2009 Macbook Pro OS X 10.6.8 with Iphoto 8.1.2. My go to camera is a Canon Rebel T4i and I shoot in Raw almost without exception. File format is .cr2. I have been able to import my Raw photos without issue for several months until today when I received an error message from Iphoto informing me that the photos I wished to transfer were in an incompatible format and could not be imported. I can clearly see the pictures I want to import in iphoto so the program is at least able to generate a preview but it will not import giving me the above mentioned error message. What am I missing and what can be done to correct this short of updating my entire operating system and iphoto? What can I say, I like Snow Leopard.

    Used Image Capture and a card reader still to no avail even with preview. Here are screens of the error messages and views I am getting. They may hold a clue:
    Iphoto error Message:
    Preview Error Message:
    Image capture View via direct Camera Connection:
    Image Capture view via memory card connection, notice the locks:

  • IPhoto not working with iMovie or Garageband

    Ever since I upgraded to iMovie 09 (from 08), my iPhotos will NOT load to iMovie. Or Garageband or even upload to email for that matter.
    What happens is that my iphotos say "loading photos" or something like that, and it just has a little spinner there and NEVER loads the photos for use with iMOvie. During Garageband, it shuts down my computer every single time.
    I went to the Mac store and they couldn't figure it out either.
    Can someone help me?
    OR.....I have my original CD that came with my computer. If I put that in, will my original iLife 08 reload? I'm nervous to try it, but I'm desperate. It's been 6 months without the use of my iAnything.

    Sal, I had a similar problem once. I'm sorry you had to go through so much of this but maybe what I discovered can still help you.
    - View your albumdata.xml file in some text editor, like TextEdit.
    - Do a Find (cmd f) for "List of Keywords"
    - The XML under that looks kind of like this:
    <dict>
    <key>1</key>
    <string>Favorite</string>
    <key>6</key>
    <string>Birthday</string>
    <key>3</key>
    </dict>
    You will probably have more keywords, this is just an example. But see the format - everything that has <something> ends with </something>.
    When I had the problem, the example above looked like:
    <dict>
    <key>1</key>
    <string>Favorite <key>6</key>
    <string>Birthday</string>
    <key>3</key>
    </dict>
    Notice the line return and </string> are missing for "Favorite". This happened to one of my keywords, and I don't know what caused it, but I deleted that keyword (and the one after it) from within iPhoto's preferences, and typed them in again.
    The problem went away. Maybe some bogus character got into the keywords to make the XML go bad.
    So try to use the method above to identify which keyword might have a problem, rather than go on a witch hunt and waste a lot of time. Of course, your problem could be different from mine entirely, but my iLife apps had the same problem you described.

  • Iphoto not working with upgrade and updated after Yosemite update

    We updated to Yosemite last night and this morning I found I can not open my iPhoto.  We had a very old version that cost to update so I decided to wait, well when I saw there was a free update I did that, then it said To open your library with this version of iPhoto, it first needs to be prepared.  Now when I try to open it it keeps telling me to do the prepared upgrader and I already did, so it only gives me the option to quit or learn more which is where you down load it. 

    All fixed thanks to the apple support people.  It was very hard and many many different ways to get it resolved. 

Maybe you are looking for