Deactivate all Services in sicf

Hello friends
Is there a possibility to deactivate in transaction sicf all services (including all subtrees)?
In our system unfortunately all services are active. We want to deactivate them all. When I deactivate a supertree the subtrees are implicite deactivated. But when I activate one service within this tree, all services are reactivated.
When you activate a service you can say: "Activate all". When you deactivate a service you do not have this possibilty (or I do not see it).
Thank you in advance.
Regards
Marco

Hi,
Welcome to SDN.
Post the same query in SAP Netweaver you will get quick response.
Anyways once activated all your services are activated because your machine will be registered, anyways post for more better answer.
Cheers!!
Venkat

Similar Messages

Deactivate all Services together in sicf

Hello friends
Is there a possibility to deactivate in transaction sicf all services (including all subtrees)?
In our system unfortunately all services are active. We want to deactivate them all. When I deactivate a supertree the subtrees are implicite deactivated. But when I activate one service within this tree, all services are reactivated.
When you activate a service you can say: "Activate all". When you deactivate a service you do not have this possibilty (or I do not see it).
For now I deactivated all services by hand (Shift-F12 then ok, and drop down). Tooked me around an hour. But it would interest me if there is a possibility to do that in one step.
Thank you in advance.
Regards
Marco

Hello Juan
Thank you for the answer.
But I know that already. The point you describe causes following problem:
You deactivate the top node --> all Subsequent Services in the tree (Services) are implicite deactivated.
When you activate one single service in this tree the top node will be reactivated and all subsequent nodes too.
For example:
Node 1 (top node) --explicite deactivated
-->Subservice 1 --implicite deactivated
-->Subservice 2 --implicite deactivated
-->Subservice 3 --implicite deactivated
Ok. Now you activate Subnode 3 (who has no other subservices) with the "single yes". Now Node 1 will automatically be activated (because Subservice 3 can't be activate without an active Node 1. That causes that all other services (here subservice 1 and 2) are reactivated.
The image than would be the following one:
Node 1 (top node) --automatically reactivated
-->Subservice 1 --automatically reactivated
-->Subservice 2 --automatically reactivated
-->Subservice 3 --explicite activated
That is not a really problem that I have, it does just interest me if it possible to deactivate all services with one click.
Regards
Marco

Program to find all active services in SICF

Hi all,
Anyone can help me out in finding all the active services in SICF.Is there any program or transaction available for that?
Thanks
Senthil

i guess this table has it
icfservice
Regards
Raja

Services in SICF and in SE80

Hi friends,
Can anybody tell me the difference between services created in SICF and the services in SE80.From where i have to execute the services?
I have created a screen-based service in se80 and published the service.
In SICF i have created the sub-element for the same service created in se80.I have done all the settings.and activated the service and tested that service here itself.
But my doubt is once the service is activated in SICF , from where this service should be excuted? ie., either from SICF or from SE80?
Am confusing at this step.please help me out.
Thanks in advance.
Regards
sireesha

mmm you are a bit confused....let me see if I can help shed some light....
In SE80, you will customize/develop/test your ITS service. Also, from SE80, you can publish it out (yes, even if you use integrated/internal ITS, you still "publish").
SICF, however, is the "framework"/enabler for the internal/integrated ITS. SICF simply allows you to admin your services....such as adding properties about them, activate/deactivate/etc. One big reason for using SICF is that you HAVE to define your service parameters (called "settings" there). Theses are much like the same service parameters your set for your top level service file in SE80, however, integrated ITS ignores those service params (as well as the global service file).Therefore, you have to (re)define them in SICF. Confusing, I know. But it has a plus side in that you can define some services in one place and not in the other so that the service can behave differently if accessed via external ITS vs. integrated ITS.
As far as testing, you are very right....you can execute/test your service from either location.
For me, I tend to set up my service in SICF, but do all my work and testing in SE80 (just more used to it). But it is up to you.
Hope this helps!

Services in SICF for Information broadcasting.

Hi gurus,
Can anyone please help me with what all services need to be activated in SICF, a list of these services for information broadcasting to be successful. Points will be assigned accordingly.
regards,
Sree.

Hi
Please refer to following links these may b helpful for setting IB
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40811e9c-4edd-2a10-06bd-c41e475f607a
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/709d747f-6b08-2b10-8f8c-b3e3c8c4ccd3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d09dea78-b61a-2b10-c7ad-acd94d64079a
We need to activate the SMTP services in SICF.
Also Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web
hope this helps..
Sonal.....
Edited by: Sonal Patel on Sep 11, 2009 4:16 PM

Web Dynpro-layout preview-Error-IE cannot display-service in SICF activated

Hello,
By starting a view in web dynpro framework, i have the error in tab layout "page cannot be displayed" from IE.
Before i make the change in the DNS and system32/../etc, the layout was displayed, but the web dynpro application cannot be started.
Now after those configurations and activation of services in SICF, i can start the web application only with firefox and not internet exploer, and, that internet explorer is preconfigured for the layout preview, i recieve all times the eror "cannot display" when i start a view in the layout tab.
1. How can i change settings so that view can be displayed in layout after i actived the (hope the suitables i.e. view designer) services in SICF - Default_host...
2. Is it possible to change IE to firefox as main browser for layout tab.
Note: For virtual domain i
1. add dns "domain.com" in the DNS
2. add in system32/etc/host file to "127.0.0.1 localhost", "10.10.0.10 sysserv.domain.com"
3. and trough tr. rz10 in the instance profil input the icm/.... ....domain.com
Through this three steps i could get the web dynpro application started,
but from the other side, the layout preview do not display the view again
and just send error the message: "THIS PROGRAM CANNOT DISPLAY THE WEBPAGE"
Many thanks for helping
arnaud
Edited by: Arnaud on Jul 15, 2010 4:36 PM
Edited by: Arnaud on Jul 15, 2010 8:31 PM

Hi,
The string is not correctly formed ( a quote and a concatenation ) :
Your url :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
The Correction :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
Hope it helps
Mohamed Dadi

Updating Logon Data for Web Service in SICF not possible

Hello, hopefully someone can help me with my problem.
I have created a custom Web Service based on a custom Z Function Module.
This all works fine in our Development environemnt. I was able to go into SOAMANAGER and generate the end point. This created the web service in SICF. I was then able to go into SICF and change the logon data to use our service ID.
All tested and functionaing great.
We then transported everything to QAS. I again went into SOAMANAGER to generate the End Point, and this worked fine, we have the web service now visible in SICF.
The problem now occurs when I go into SICF and try go into change mode to enter the service user in the logon data tab. I get a popup message stating :
"You cannot use this transaction to change the service."
When I click on the long text explanation I get:
"Message SHTTP824
You cannot use transaction SICF to modify this service.
This means that only the application has the authorization to use the defined interface to modify this service."
Does anyone know how to get around this ? Or how to define our logon data using SOAMANAGER ?
thanks
Adrian

the right way to transport logon info along with SICF service is to create an external alias for your BSP and maintain the logon info in the external alias.
other wise you have to open the production system for changes and change it , which may not be allowed.
Regards
Raja

Reporting In Service Manager 2012 - How To Get A List Of All Service Requests Regardless of Status

Within the Custom Reporting Options available to users of Ssystem Center Service Manager 2012, which would one use to create reports that do not contain any agregated data but are instead detail level info such as a list of all Service Requests reardless
of status? I want to include within the report the same data you see on the main page of a Service Request when you double-click a Service Request within Service Manager and it pops opne the details of the Service Request.
I'm trying to get the following info for each Service Requests
SR ID (i.e. SR1234)
Affected User
Title
Description
Priority
Source
Area
Support Group
Assigned To
Created By and Created On
I know the cubes w/Excel offer a great way to get data for a **piece meal report or for getting agregated data (I.E. counts, sums, avergares, Max's & Mins) but I need a report that has zero totals and no agregations.
Thanks
** A piece meal report is a report that has to be manually pieced together by combining data from others reports and other sources because no single report can be constructed to bring all the data togethere into a single report. If you've ever
worked with an accountant taht uses Excel for everything but who has no idea how SQL or databases in general are deisgned then chances are you've either been asked to create a piece meal report for them and or seen them do one them selves when they open a
spreadshet and dump into it disperate data from a variety of sources and then ask you why you can't automate that same report for them.

the following thread covers some good SQL queries to get details about the Incident Request, just amend them to cover the Service Request
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e703641d-3e05-4df4-be2b-bf9bd62534f8/how-to-generate-incident-report-with-incident-description-field-in-scsm-2012-sp1

Upgrading to Mountain Lion server and all services breaks down...

Hi!
I have, after endless hours of scanning logs and .plist and other files' content and permission settings found why Mountain Lion Server.app in some cases doesn't seem to be able to take control over all service, stating it can't read or write its own setting files etc.
As a Swede I of course run a system set in the Swedish language. Mountain Lion can't upgrade a Swedish system, only fore languages are accepted !!!
See Migration Logs!
//Excerpt from the Mail Migration log:
Begin Mail Migration: Thu Aug 2 19:34:24 2012
purge: 0
sourceRoot: /Library/Server/Previous
sourceType: System
sourceVersion: 10.7.4
targetRoot: /
language: sv
Did not supply a valid language for the --language parameter, needs to be one of [en | fr | de | ja]
As you can see, it can only upgrade in English, French, German and Japanese system language. With no inital warnings the system crashes and causes a true mess half the way through its installation when you start Server.app.
Solution:
Throw Server.app in the trash or move it outside the Application folder, to force the computer to realized "its not a server". It can take half a minute or so for the system to realize it is no longer a server. You will see a sign.
Change the language setting to English in your system preferences and restart your computer. Move back Server.app from the trash (or where you put it) and start Server.app, thereby initiating a new Servers installation. I was happy to find that all mail accounts etc was found again. I thought for several hours they where lost.
The various sites hosted by the server did however not appear in their correct new location (when I tryed this). I had to manually move them from the "Previous" folder in /Library/Server/Previous/Library/Server/Web/Data/Sites/ to /Library/Server/Web/Data/Sites/
I hope this helps anyone out there....
Cheers!
Stefan

Please explain.... when are you stoped from upgrading?
I haven't actually had problems with the actual OS upgrade it is when you launch Server.app the first time everything goes to f-n h....
Server.app should reconfigure and move around a lot of files and it does, but not succeeding doing it correctly. Many services can't read their config files and have them in two places. I trying to figure out which ones are being used. Somethime both locations are used but only parts of the settings in the files !?!?
I am soon giving up...

Unable to install patchset 10.2.0.3 on XP - wants me to stop ALL services

Hi,
I am unable to install patchset 10.2.0.3 on our existing OWB installations (patchset 10.2.0.2) already installed.
I get an error message saying that certain files are in use and that I should stop the "following services". It then proceeds to list every running service!!
I have tried installing OWB with the 10.2.0.2 patchset and then I am able to install the 10.2.0.3 one but that is not a viable solution as I already have several users with OWB 10.2.0.2 installed on their machines and they need to patched to 10.2.0.3 ASAP. I really don't want to have to uninstall OWB from their machines and reinstall it.
So, what's going on? Why does the OUI say it wants every Windows service to be stopped?

I think this problem is caused by one or several MS Windows services (maybe MSDTC?). OUI cannot identify exact service name which locks Oracle file(s) and show all services in list.
There are several notes on Metalink about this problem:
Note:356181.1 "Errors about files being in use, when applying a patch."
Note:402546.1 "How To Specify Which OCI.DLL The MS DTC PROCESS Uses"
Note:198699.1 "Access denied on OCIW32.DLL when removing 9iAS Release 1 (1.0.2) installation"
Note:232827.1 "Universal Installer can not replace the oci.dll Error when install/deinstall Oracle Products"
Note:294350.1 "Write Errors, or Files In Use, or NoServicesForProcessException During Patch Installation"
Try to change registry value HKLM/SOFTWARE/Microsoft/MSDTC/MTxOCI/OracleOciLib to nonexistent file name (for example xxx.dll), restart Windows and try to install patch again. Please give a feedback to this recommendation, I think it would be interesting to all.
Regards,
Oleg
Message was edited by:
oleg

How to distribute web users on appli server via BEx service at SICF?

I read from the BW tuning guide that following is possible:
Distribution of web users across application servers can be configured in the
BEx service in SICF.
I look into SICF but cannot find a way to configure the distribution.
Could you help? Thanks!

Hi,
I think you talk about authentication in Bex with internet users, is it?
You can configure internet users in tx SU05, and then you can set "Internet users" like basic authentication in bex service.
Regards.

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India

Steps to create service in SICF transaction

hi..
steps to create service in SICF transaction
thank you.

hi
good
go through this link
http://help.sap.com/saphelp_nw70/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm
thanks
mrutyun^
null

Monitor all services on all servers?

Hi all
I'm looking for the easiest way of monitoring all services with startupmode=auto and alerts when state!=running. I found this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/dbb175c4-8ec0-4427-9d10-9382044144e7/monitor-all-windows-services-on-multiple-servers-and-recover?forum=operationsmanagerauthoring
So I took this code
Dim oAPI, oBag
Set oAPI = CreateObject("MOM.ScriptAPI")
Set oBag = oAPI.CreatePropertyBag()
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colListOfServices = objWMIService.ExecQuery _
("SELECT * FROM Win32_Service WHERE StartMode = 'Auto' AND Started = false")
If colListOfServices.Count > 0 Then
For Each objService in colListOfServices
If strDesc = "" Then
strDesc = objService.Caption
Else
StrDesc = StrDesc & ", " & objService.Caption
End if
Next
Call oBag.AddValue("Description", strDesc)
Call oBag.AddValue("State", "BAD")
Else
Call oBag.AddValue("State", "OK")
End if
Call oAPI.Return(oBag)
I used this in a two state monitor I created in our SCOM 2012 environment. For starters it runs every 2 minutes, it's enabled, monitor target is Windows Server 2008 Operating System, it's set to generate alerts on warning, the Unhealthy expression is:
Property[@Name='State'] Equals BAD
And the Healthy Expression is:
Property[@Name='State'] Equals GOOD
Unfortunately I'm getting no alerts at all. And I dont think I have any way of seeing if it's actually discovering all the services? AND I have no previous experience with vb scripting, but do have some powershell experience.
Any suggestions on how to get this up and running please?
Update: I just got alerts from all servers:
Workflow Runtime: Failed to run a process or script
The process started at 11:25:%1 failed to create System.PropertyBagData, no errors detected in the output. The process exited with 1.
Command executed "C:\Windows\System32\cscript.exe" /nologo "Company.ServiceMonitoring"

At the first point make sure that you are creating the service monitor in Authoring --> Management Pack Templates --> Windows Service.
The place where we change is within the discovery part and not monitor. Search for the text what you entered as Service Name while creating the service monitor. You should see something similar to this,
<Discovery ID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec.DiscoveryRule" Enabled="false" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
        <Category>Discovery</Category>
        <DiscoveryTypes>
          <DiscoveryClass TypeID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec" />
        </DiscoveryTypes>
        <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
          <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
          <ServiceName>------------ServiceName>
          <Frequency>60</Frequency>
          <ClassId>$MPElement[Name="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec"]$</ClassId>
          <InstanceSettings>
            <Settings>
              <Setting>
                <Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
                <Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceName$</Name>
                <Value>$Data/Property[@Name='Name']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
                <Value>$Data/Property[@Name='BinaryPathName']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/DisplayName$</Name>
                <Value>$Data/Property[@Name='DisplayName']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/Description$</Name>
                <Value>$Data/Property[@Name='Description']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
                <Value> </Value>
              </Setting>
            </Settings>
          </InstanceSettings>
        </DataSource>
      </Discovery>

Accordion widget Bug: Accordion deactivates all hyperlinks below widget when opened

A placed accordion widget in a master page with foreground order deactivates all hyperlinks under the accordion widget.

This seems to happen when you enable the Can Close All / Overlap Items below options while the Accordion is placed on Master Foreground and the link is right below it on a content page (but within the Accordions span). The workaround would be to either move the Accordion to Master Background or move the link under the Accordion to be outside its span (when opened) or disable the Overlap Items below option.
Thanks,
Vinayak

Deactivate all Services in sicf

Similar Messages

Maybe you are looking for