Deactivate all Services together in sicf

Hello friends
Is there a possibility to deactivate in transaction sicf all services (including all subtrees)?
In our system unfortunately all services are active. We want to deactivate them all. When I deactivate a supertree the subtrees are implicite deactivated. But when I activate one service within this tree, all services are reactivated.
When you activate a service you can say: "Activate all". When you deactivate a service you do not have this possibilty (or I do not see it).
For now I deactivated all services by hand (Shift-F12 then ok, and drop down). Tooked me around an hour. But it would interest me if there is a possibility to do that in one step.
Thank you in advance.
Regards
Marco

Hello Juan
Thank you for the answer.
But I know that already. The point you describe causes following problem:
You deactivate the top node --> all Subsequent Services in the tree (Services) are implicite deactivated.
When you activate one single service in this tree the top node will be reactivated and all subsequent nodes too.
For example:
Node 1 (top node) --explicite deactivated
-->Subservice 1 --implicite deactivated
-->Subservice 2 --implicite deactivated
-->Subservice 3 --implicite deactivated
Ok. Now you activate Subnode 3 (who has no other subservices) with the "single yes". Now Node 1 will automatically be activated (because Subservice 3 can't be activate without an active Node 1. That causes that all other services (here subservice 1 and 2) are reactivated.
The image than would be the following one:
Node 1 (top node) --automatically reactivated
-->Subservice 1 --automatically reactivated
-->Subservice 2 --automatically reactivated
-->Subservice 3 --explicite activated
That is not a really problem that I have, it does just interest me if it possible to deactivate all services with one click.
Regards
Marco

Similar Messages

Deactivate all Services in sicf

Hello friends
Is there a possibility to deactivate in transaction sicf all services (including all subtrees)?
In our system unfortunately all services are active. We want to deactivate them all. When I deactivate a supertree the subtrees are implicite deactivated. But when I activate one service within this tree, all services are reactivated.
When you activate a service you can say: "Activate all". When you deactivate a service you do not have this possibilty (or I do not see it).
Thank you in advance.
Regards
Marco

Hi,
Welcome to SDN.
Post the same query in SAP Netweaver you will get quick response.
Anyways once activated all your services are activated because your machine will be registered, anyways post for more better answer.
Cheers!!
Venkat

Reporting In Service Manager 2012 - How To Get A List Of All Service Requests Regardless of Status

Within the Custom Reporting Options available to users of Ssystem Center Service Manager 2012, which would one use to create reports that do not contain any agregated data but are instead detail level info such as a list of all Service Requests reardless
of status? I want to include within the report the same data you see on the main page of a Service Request when you double-click a Service Request within Service Manager and it pops opne the details of the Service Request.
I'm trying to get the following info for each Service Requests
SR ID (i.e. SR1234)
Affected User
Title
Description
Priority
Source
Area
Support Group
Assigned To
Created By and Created On
I know the cubes w/Excel offer a great way to get data for a **piece meal report or for getting agregated data (I.E. counts, sums, avergares, Max's & Mins) but I need a report that has zero totals and no agregations.
Thanks
** A piece meal report is a report that has to be manually pieced together by combining data from others reports and other sources because no single report can be constructed to bring all the data togethere into a single report. If you've ever
worked with an accountant taht uses Excel for everything but who has no idea how SQL or databases in general are deisgned then chances are you've either been asked to create a piece meal report for them and or seen them do one them selves when they open a
spreadshet and dump into it disperate data from a variety of sources and then ask you why you can't automate that same report for them.

the following thread covers some good SQL queries to get details about the Incident Request, just amend them to cover the Service Request
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e703641d-3e05-4df4-be2b-bf9bd62534f8/how-to-generate-incident-report-with-incident-description-field-in-scsm-2012-sp1

Run time error while testing a service through transaction SICF/SOAMANAGER

Hi all,
We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
We are not sure whether any other settings or steps required for testing the web services..
Could you please let us know which steps/configurations we are missing?
Details of the run time error.
Service cannot be reached
What has happened?
URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks
Siva

Please ask you Basis admin to perform the following.
1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
4) Activate the required services from tcode SICF
Thanks,
Sridhar

Services in transaction sicf failing with Internal Error 500

Hi all,
When I try to test a service in transaction sicf, by right clicking on it and saying Test service.
I am getting an error "HTTP 500 Internal Server Error". All the services are running fine in
smicm.
The version of SAP is ECC 5.0(only ABAP Stack), Oracle, Windows.
This happens for all the services.
Any help would be greatly appreciated.
Thanks,
Vishi

Hi Sharath,
I have selected all of them, clicked on publish, the I got a message saying "choose an ITS for publishing"
Using the message in performance assistant,
In se80, Utilities->settings, On the ITS tab under Publish choose the ITS server,
However, here the only options are
1. on all defined sites,
2. on selected site, print
3. to local directory.
Here, I have selected on all defined sites.
Got the message "Object published successfully; site All Defined Sites"
How to proceed further?
Thanks,
Vishi
Edited by: sap.technical on Mar 9, 2010 6:15 AM

My iPad was stolen in brazil. i cannot get the manufacturer id number from my iPhone or my macbook air....they are all linked together though. any suggestions on how and if i can possibly retrieve this and thus locate the device? thanks julie

my iPad was stolen in brazil. i cannot get the manufacturer id number from my iPhone or my macbook air....they are all linked together though. any suggestions on how and if i can possibly retrieve this and thus locate the device? thanks julie

Launch iTunes, go to the Preferences, select Devices, and hover your cursor over the backup file for the iPod. That should show you the serial number, IMEI, and possibly the MEID.
The manufacturer ID will not help you locate the iPad, though. If you set up the Find My iPad service in the Settings prior to the iPad going missing, then there is a chance that can be tracked, though it depends on a number of factors (the iPad is turned on, connected to a WiFi or 3G network, and has not had the Find My iPad service disabled or the iPad been completely restored).
If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards.

Connecting multiple services together: Google Drive, Drop Box, and Cloud.

Is there a way to connect multiple services such as Google Drive, Drop Box, and Cloud into one program that allows to you manage all three at once? I am trying to look for a program that can connect all three together into one. Is there such a thing?

No such program exists that I've seen, and given the proprietary nature of each service, particularly iCloud, I very much doubt such a program would be possible.
Regards.

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

HT1277 I have changed my email account on my computer to imap and 993 but now I'm not receiving any emails. I was originally trying to sinc my ipad and iphone and computer together so when I delete an email it will all delete together. What is the best wa

I need help to update my email and also to sinc my computer, iphone and ipad together so when I delete my emails they will all disappear together. I got the iphone and ipad to work but cant seem to get the computer to work.

E-mail provider?
Troubleshooting sending and receiving email messages

Upgrading to Mountain Lion server and all services breaks down...

Hi!
I have, after endless hours of scanning logs and .plist and other files' content and permission settings found why Mountain Lion Server.app in some cases doesn't seem to be able to take control over all service, stating it can't read or write its own setting files etc.
As a Swede I of course run a system set in the Swedish language. Mountain Lion can't upgrade a Swedish system, only fore languages are accepted !!!
See Migration Logs!
//Excerpt from the Mail Migration log:
Begin Mail Migration: Thu Aug 2 19:34:24 2012
purge: 0
sourceRoot: /Library/Server/Previous
sourceType: System
sourceVersion: 10.7.4
targetRoot: /
language: sv
Did not supply a valid language for the --language parameter, needs to be one of [en | fr | de | ja]
As you can see, it can only upgrade in English, French, German and Japanese system language. With no inital warnings the system crashes and causes a true mess half the way through its installation when you start Server.app.
Solution:
Throw Server.app in the trash or move it outside the Application folder, to force the computer to realized "its not a server". It can take half a minute or so for the system to realize it is no longer a server. You will see a sign.
Change the language setting to English in your system preferences and restart your computer. Move back Server.app from the trash (or where you put it) and start Server.app, thereby initiating a new Servers installation. I was happy to find that all mail accounts etc was found again. I thought for several hours they where lost.
The various sites hosted by the server did however not appear in their correct new location (when I tryed this). I had to manually move them from the "Previous" folder in /Library/Server/Previous/Library/Server/Web/Data/Sites/ to /Library/Server/Web/Data/Sites/
I hope this helps anyone out there....
Cheers!
Stefan

Please explain.... when are you stoped from upgrading?
I haven't actually had problems with the actual OS upgrade it is when you launch Server.app the first time everything goes to f-n h....
Server.app should reconfigure and move around a lot of files and it does, but not succeeding doing it correctly. Many services can't read their config files and have them in two places. I trying to figure out which ones are being used. Somethime both locations are used but only parts of the settings in the files !?!?
I am soon giving up...

How can I extract all attachments together in office365 email?

How can I extract all attachments together in office365 email?

There is no build-in feature in Outlook 2013. However, we can accomplish that via coding VBA.
Here is a simple I may provide:
http://stackoverflow.com/questions/15531093/outlook-vba-macro-to-save-attachments-to-a-folder-and-rename-them
Programming/Code related questions should really be posed in one of the following forums:
Outlook for Developers
http://social.msdn.microsoft.com/Forums/en-US/outlookdev
Microsoft Office Programming
http://answers.microsoft.com/en-us/office/forum/customize?page=1&tab=all&tm=1361680524815
Tony Chen
TechNet Community Support

Unable to install patchset 10.2.0.3 on XP - wants me to stop ALL services

Hi,
I am unable to install patchset 10.2.0.3 on our existing OWB installations (patchset 10.2.0.2) already installed.
I get an error message saying that certain files are in use and that I should stop the "following services". It then proceeds to list every running service!!
I have tried installing OWB with the 10.2.0.2 patchset and then I am able to install the 10.2.0.3 one but that is not a viable solution as I already have several users with OWB 10.2.0.2 installed on their machines and they need to patched to 10.2.0.3 ASAP. I really don't want to have to uninstall OWB from their machines and reinstall it.
So, what's going on? Why does the OUI say it wants every Windows service to be stopped?

I think this problem is caused by one or several MS Windows services (maybe MSDTC?). OUI cannot identify exact service name which locks Oracle file(s) and show all services in list.
There are several notes on Metalink about this problem:
Note:356181.1 "Errors about files being in use, when applying a patch."
Note:402546.1 "How To Specify Which OCI.DLL The MS DTC PROCESS Uses"
Note:198699.1 "Access denied on OCIW32.DLL when removing 9iAS Release 1 (1.0.2) installation"
Note:232827.1 "Universal Installer can not replace the oci.dll Error when install/deinstall Oracle Products"
Note:294350.1 "Write Errors, or Files In Use, or NoServicesForProcessException During Patch Installation"
Try to change registry value HKLM/SOFTWARE/Microsoft/MSDTC/MTxOCI/OracleOciLib to nonexistent file name (for example xxx.dll), restart Windows and try to install patch again. Please give a feedback to this recommendation, I think it would be interesting to all.
Regards,
Oleg
Message was edited by:
oleg

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India

I have 3 email accounts on my Iphone. When I updated to ios7 it merged all inboxes together. Is there a way to separate them?

I have 3 email accounts on my Iphone. When I updated to ios7 it merged all inboxes together. Is there a way to separate them?

Okay, I had not finished the update on my device when I first answered your question. I just now got a chance to get back on here.
Open the mail app. When you see the Mailboxes screen, over to the upper right you should see Edit. Tap on that. The next screen allows you to select what to display on the previous screen. You should be able to select the individual mailboxes. Mine came over that way when I updated.
Hope this helps.

Monitor all services on all servers?

Hi all
I'm looking for the easiest way of monitoring all services with startupmode=auto and alerts when state!=running. I found this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/dbb175c4-8ec0-4427-9d10-9382044144e7/monitor-all-windows-services-on-multiple-servers-and-recover?forum=operationsmanagerauthoring
So I took this code
Dim oAPI, oBag
Set oAPI = CreateObject("MOM.ScriptAPI")
Set oBag = oAPI.CreatePropertyBag()
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colListOfServices = objWMIService.ExecQuery _
("SELECT * FROM Win32_Service WHERE StartMode = 'Auto' AND Started = false")
If colListOfServices.Count > 0 Then
For Each objService in colListOfServices
If strDesc = "" Then
strDesc = objService.Caption
Else
StrDesc = StrDesc & ", " & objService.Caption
End if
Next
Call oBag.AddValue("Description", strDesc)
Call oBag.AddValue("State", "BAD")
Else
Call oBag.AddValue("State", "OK")
End if
Call oAPI.Return(oBag)
I used this in a two state monitor I created in our SCOM 2012 environment. For starters it runs every 2 minutes, it's enabled, monitor target is Windows Server 2008 Operating System, it's set to generate alerts on warning, the Unhealthy expression is:
Property[@Name='State'] Equals BAD
And the Healthy Expression is:
Property[@Name='State'] Equals GOOD
Unfortunately I'm getting no alerts at all. And I dont think I have any way of seeing if it's actually discovering all the services? AND I have no previous experience with vb scripting, but do have some powershell experience.
Any suggestions on how to get this up and running please?
Update: I just got alerts from all servers:
Workflow Runtime: Failed to run a process or script
The process started at 11:25:%1 failed to create System.PropertyBagData, no errors detected in the output. The process exited with 1.
Command executed "C:\Windows\System32\cscript.exe" /nologo "Company.ServiceMonitoring"

At the first point make sure that you are creating the service monitor in Authoring --> Management Pack Templates --> Windows Service.
The place where we change is within the discovery part and not monitor. Search for the text what you entered as Service Name while creating the service monitor. You should see something similar to this,
<Discovery ID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec.DiscoveryRule" Enabled="false" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
        <Category>Discovery</Category>
        <DiscoveryTypes>
          <DiscoveryClass TypeID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec" />
        </DiscoveryTypes>
        <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
          <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
          <ServiceName>------------ServiceName>
          <Frequency>60</Frequency>
          <ClassId>$MPElement[Name="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec"]$</ClassId>
          <InstanceSettings>
            <Settings>
              <Setting>
                <Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
                <Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceName$</Name>
                <Value>$Data/Property[@Name='Name']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
                <Value>$Data/Property[@Name='BinaryPathName']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/DisplayName$</Name>
                <Value>$Data/Property[@Name='DisplayName']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/Description$</Name>
                <Value>$Data/Property[@Name='Description']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
                <Value> </Value>
              </Setting>
            </Settings>
          </InstanceSettings>
        </DataSource>
      </Discovery>

Deactivate all Services together in sicf

Similar Messages

Maybe you are looking for