Deactivate AutoComplete functionality in Integration Builder

Hi,
did anyone find out how to deactivate the autocomplete functionality in the integration builder? In "Personal Settings" in section Autocomplete there is a check box to decativate this feature and a button to delete the history. The button seems to work in order to delete the history but it seems that the check box does not change anything.
Sometimes the AutoComplete feature is just anoying, especially when you are copying objects...
We are on XI 3.0 SP19
Thanks and Regards,
Helmut

Helmut,
>Sometimes the AutoComplete feature is just anoying, especially when you are copying objects...
I agree . I have learnt to live with it though. Hopefully someone has the solution.
Regards
Bhavesh

Similar Messages

Regarding Functions of Integration Builder (Design)

Hi friends,
I am new to XI.
In Message Mappings ,in data flow editor ,in a particular scenerio I have both source and target fileds and connection between them.How to insert function between those two.
With Best regards,
sagar

Hi,
At the bottom that is below the mapping object you can find Functions. In that select function and double click on that.
Regards
Agasthuri Doss

SPORXY Integration Builder data not understood

Hello everybody,
I want to connect a 6.20 System to our XI 7.0 (SP13). The Integration Engine in the 6.20 is maintained correctly (Application System, Destination works), the sldcheck works fine.
I use the table SPROXSET instead of the exchangeprofile. The profile is empty, the SPROXSET has an valid entry (IFR_ADDRESS: http://systemDNSName:57000/rep).
The SPROX_CHECK_HTTP_COMMUNICATION says: HTTP communication functioning
But the test =>Check with report SPROX_CHECK_IFR_RESPONSE and ==>Check with report SPROX_CHECK_IFR_CONNECTION both show the failure: Integration Builder data not understood
Normally I connect 6.40 Systems to the XI, they work without a problem. Is there something special with 6.20 Systems?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 1, 2008 10:04 AM

The Add-On is isntalled.
I found out something else. When I try the Connection Test No.3 - SPROX_CHECK_IFR_RESPONSE (in the SPROXY), the IE opens the following Url:
http://myHost:57000/rep/ifraccess?service=query&type=namespace
and I get a HTTP 404 Error. What is the correct Adress here?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 4, 2008 4:49 PM

Integration Builder under Linux

Hi all,
during preparation for a migration project to Linux were experimenting using the SAP Integration Builder Repository and Directory of a XI 2.0 on a Linux client. We got it start proper but the context menu is not working. So we are not able to use functions like export or activating changes. The right mouse button is working in other programs but not here. We thought it could be a problem of the used Java versions. So far we tried 2 combinations of Java Web Start and Java 2 Runtime Environment:
Java Web Start 1.4.2_04
Java 2 Runtime Environment: version 1.3.1_12 of Sun Microsystems Inc.
Java Web Start 1.0.1_02
Java 2 Runtime Environment: version 1.3.1_12 of Sun Microsystems Inc.
Is anyone out there using the Integration Builder on a Linux client?
Thanks in advance
Andreas Paape

Hi Andreas,
We may be in the future. I will check and get back to you on Monday.
Kind regards
Colin

SPROXY: No connection to Integration Builder (only local data visible)

¡Hola!
When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server. I also checked that the parameters in the Exchange Profile were correct.
Transaction SLDCHECK is working ok. The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
1. The address of the Integration Builder must be stored in the R/3
     System
     =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
Result: OK: Address maintained
2. The HTTP connection of the R/3 application server must function
correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
Result: HTTP communication functioning
The following 2 steps return an error:
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
Result: Integration Builder data not understood
4. Proxy generation must correctly interpret the data of the
Integration Builder
==>Check with report SPROX_CHECK_IFR_CONNECTION
Result: Integration Builder data not understood
I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
Thanks and Regards,
Carlos

Carlos,
Check Global Configuration data in R3 using TC : SXMB_ADM.
You need to set values..Role of Business System : Application System and Corresponding Integration server details.
Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
Nilesh
Message was edited by:
        Nilesh Kshirsagar

No Connection to Integration Builder (only local data visible): from R/3

Hi,
I am also facing the same problem. I maintained the RFC destinations in R/3 properly. I did Test Connection and for RFC destination its working fine. I maintained proper values in SLDAPICUST. When I run SLDCHECK I got the following error.
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Otherwise access to XI Profile works fine. But then when I run SPROXY I am getting the same message No Connection to Integration Builder (only local data visible)
I also checked the following report =>Check with report SPROX_CHECK_IFR_RESPONSE (3rd option) its giving informational message Integration Builder data not understood, for the 4th report ==>Check with report SPROX_CHECK_IFR_CONNECTION, it is also showing the same above information message.
Looking forward for the response,
Appreciate your help,
Thanks and Regards,
Jagadish

Hi,
I had the same problem and I have already solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa

PI 7.11 sp6 Integration Builder - folder view error

Experts,
We recently installed SAP NW PI 7.11 (ehp1) up to sp6. This is a new install. We did all the wizards, etc and things are basically ok.
we execute SXMB_IFR, then go to "integration builder" link and login.
If I change the view from "object view" (icon of 2 people) to "folder view" (icon of folder), we get the following error:
class com.sap.guid.GUID:library:core_lib at com.sap.engine.boot.loader.ResourceMultiParentClassLoader at 2353f67e at alive incompatible with interface com.sap.aii.ib.bom.gen.XiReference:sap.com/com.sap.xi.directory at com.sap.engine.boot.loader.ResourceMultiParentClassLoader at 79c008cf @ alive
I found this note, but it does not quite describe my problem:
Note 1525457 - Previous version of Directory API and Value Mappings
I searched all through SDN and OSS, nothing yet. I'm going to put in a message but I was wondering if anyone out there has seen this?
Thanks!
NICK

experts,
FYI, ready my problem details but I wanted to add one thing. Apparently were were at sp5 for a brief time and our developer did create some object while at that level. He reported the issue since we moved to SP6
--NICK

Unable to Launch Integration Builder: Java Web Start problem

Hi,
I am unable to launch the integration builder. I am using JDK 1.4.2_05. The java Web Start gives the following error:
Unsigned application requesting unrestricted access to system
Unsigned resource: http://<XIHostName>:50000/rep/repository/aii_util_rb.jar
I have tried deleting the Java web start cache, and even reinstalling the JDK.
Can someone suggest a workaround this problem ?
thanks,
Manish

The Java Web Start cannot accept unsigned jars. If the jars are signed, it will ask in a dialog box if it should allow unrestricted access to this jar.
In my case, I upgraded XI SP0 to SP4, which included updating the Adapter Core, Adapter Framework, and the XI TOOLS to SP4.
On launching the Web start, it seemed that the jars were not getting signed. JWS cannot allow unsigned jars to the client.
These jars are maintained in:
\usr\sap\<SID>\SYS\global\xi\directory_server\javaws\directory
I am having problems with my XI upgrade to SP4, and it is probably not signing the jars.
Do you know why this may be happening ...
thanks,
Manish

Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
Satish

Hello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N

How to Launch an Integration Builder under two different java versions

How to Launch an Integration Builder under two different java versions 1
1. Situation 2
2. How To Do 2
2.1 jre preparation 2
2.2 Put them into the system 2
2.3 Execute a Java Web Start under jre 1.4.x version 3
2.4 Change Java Runtime Versions 3
2.5 Launch an Integration Builder 6
1. Situation
OS: windows 2000 pro English
Java version: jdk 1.5.x was already installed. (Its not permitted to change.)
I dont have any authorization to install any software on the PC.
But I need to use an Integration Builder.
I already knew URLs of an Integration Builder (http://<hostname>:50000/rep/start/repository.jnlp).
2. How To Do
At this moment, an Integration Builder (XI 3.0) can be launch under jre 1.4.x environment (on windows).
2.1 jre preparation
I download j2re-1_4_2_10-windows-i586-p.exe from http://java.sun.com/j2se/1.4.2/download.html
I installed it on my home PC and copied all files from C:\Program Files\Java\ j2re1.4.2_10\ into my USB.
2.2 Put them into the system
I pasted j2re1.4.2_10 folder from my USB into the windows 2000 pro system.
Finally, I could list up all of javaws.exe under this system.
c:\j2re1.4.2_10\javaws\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\bin\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\jre\bin\javaws.exe
c:\Program Files\Java\jre1.5.0_05\bin\javaws.exe
2.3 Execute a Java Web Start under jre 1.4.x version
I executed c:\j2re1.4.2_10\javaws\javaws.exe .
2.4 Change Java Runtime Versions
Go to File-> Preferences -> Java
As you can see, it indicates 1.5 version.
Click [FIND] button.
Click [NEXT] button.
Click the j2re1.4.2_10 folder.
Click [NEXT] button.
A JRE Finder is able to find javaw.exe automatically. Or you can indicate C:\j2re1.4.2_10\bin\javaw.exe directly.
Click [NEXT] button.
Finally, there are two Java Runtime Versions. Now you need to uncheck the Enabled column of 1.5 version and check 1.4 version.
Click [OK] button.
Well, in the General tab, I selected None for Proxies.
2.5 Launch an Integration Builder
In the Location field, I typed the URL of an Integration Builder jnlp.
http://<hostname>:50000/rep/start/repository.jnlp
SAP Integration Builder comes up inside Applications area.
Select it and click [Start] button.
If you click Environment-> Integration Builder (Configuration), you can launch Integration Builder: Configuration.
[PDF file location] with screenshots
http://SDN.mobilian.org/SDN/How2LaunchIB.rar
===================Advertisement==========================
How do you search SDN?
What about [SDN Search Widget]?
SDN Search Widget
=========================================================

I am not getting anywhere with deploying my application or
applet.
I have set up my bc4j project. It contains all my VO info,
links, application module. (proj a)
I then have another project with DbInfo in it(has all my rowset
info), Multiple Frames, and my Applet.java file.
Actually I have an Applet.java file and a Application.java file
because I was seeing if both/either worked. Anyway they seem the
same, except for that extra window that comes up when you run the
applet.
I follow the steps in the oracle directions (from earlier post).
And all seems ok. But at ---->
[*] Select the subdirectory under myhtml where your applet's HTML
file
is located, and enter the directory path of the 'staging'
directory you
created in step 3 above, if different from the default.</li>
[*]Select the HTML files that JDeveloper created to run your
applet.</li>
[*]Select all of the Java source files in your project that make
up the
applet.</li>
I have no HTML file associated with my applet, at least that I
know of.
So do I need to create one, or should it of been done
automatically.
Also, I trying to figure out what will be the best way to deploy
my project. Applet or stand alone application is what my first
choices have been so far. I have read that there is some issues
with applets being served from a different server than the
database. So a stand alone application was my front runner, but
I haven't gotten either way to work yet.

Data not Updated Automatically in SLD to XI Integration Builder

I am trying to create a new software component in the SLD for use with our XI machine. However, when I do this, the component does not appear in the XI Integration Builder.
I have looked at the Automatically Updated Data page of the central SLD, and noticed that our XI J2EE system has not Auto-Updated with the SLD for quite some time, if ever.
Can somebody please give me some pointers how to sheck/configure this? Also, is there a way to update the information between the SLD and the XI system manually?
Kind Regards,
Tony.

I think the problem is the system cannot actually see the SLD for some reason.
If I try to access the SLD using the DNS name, I am unable to do so:
http://dnsname:52300/sld/index.html
However, if I use the IP address direct, I can do so:
http://192.xxx.xxx.xxx:52300/sld/index.html
I notice that when I try to access the SLD from the XI start page, the link is using the http://dnsname:52300/sld/index.html form, which isn't working.
Also, when I try to Import Software Component Versions from the Integration Builder menu, I get the error:
com.sap.aii.ibrep.client.swc.ExtSwcAccessException: Unable to read software component versions from System Landscape Directory "dnsname:52300"
So I'm thinking this may be some kind of DNS error, but I don't know how to resolve it.
Any clues?

ERROR, while i importing file in Integration Builder/

Heading 2: HI every body !!!!
please help me.
Now' i'm integrate SAP r/3 and IBM MAXIMO via SAP XI3 (SAP netweaver 2004s)
i need to import file to integration builder, while i'm importing it, I'"ve got the error:
ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
sapmaximo\sapmnt\IPC\SYS\global\security\data\SecStore.properties" does not exist although it should..
Also i did PrtSc
Link:[http://ipicture.ru/Gallery/Viewfull/17818229.html]
I am a beginner in sap netweaver please tell how to solve this step byb step

I need to import file (XI3_0_IMEA-INTEGRATE_IMEA71-mySAPERP2005_of_ibm.com_5.tpz),it''s in another format , so
i find on this forum the same error Link: [Error while generating Rules in GRC5.3 RAR Component;
the solution of this error ---"
Another reason for this error can be lack of resources or pool size of the server. The recommended settings for the Pool size are :
Max Pool size : 50
Max connections : 100
Connection Timeout : 10 sec
Max wait time : 30 sec"
Can you tell me where i can configurate this settings? (step by step)

Problem with Integration Builder Logon

Hi all,
we get the following error message when logging on to the Integration Builder:
"Authorization error. Unknown user name or incorrect passwords."
We installed the SDK versions 1.4.2_03 and 1.4.2_05 on our computer and have local Admin rights.
Has anyone already a similar problem and can us further help.
Thanks.
Niko

Hi Niko,
The userid/password must be created and be valid on the ABAP side of the XI server (via SU01), with the correct XI developer roles.
After creating the userid in SU01, it will take a few minutes before it is migrated to the J2EE side so that you can use it to logon to the Integration Builder.
Regards,
Bill

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Non-central adapter engine not visable in integration builder

ls,
I have a pi system and a separate non-central adapter engine. After installing i did all the post actions including the following part:
5.13 Clearing the SLD Data Cache after Installing a Non-central Advanced Adapter Engine
When you have installed a non-central Advanced Adapter Engine, you need to manually clear the SLD Data Cache in the Integration Builder to make it visible and selectable in the communication channels.
Procedure
1.
After SAPinst has finished, open the Integration Builder of your PI system at http://<host>:<port>/dir/start/index.jspIntegration Directory and logon as a user with the ABAP role SAP_XI_CONFIGURATOR assigned.
2.
In the Integration Builder, choose Environment.
3.
From the drop-down list, choose Clear SLD Data Cache.
(as described in: Installation GuideAdapter Engine (Java EE) 7.1 Including Enhancement Package 1 on Windows: MS SQL ServerTarget)
However when creating a communication channel in the integration builder there is only the central adapter engine to choose in parameter tab screen.
I was hoping maybe some-one knows what else need to be done to make de non-central known as adapter engine.
thanks in advance
Peter

HI,
with user PIDIRUSER i was indeed able to refresh the af cache. Unfortunately without a positive
Under the runtime workbench (http://<host>:<port>0/rwb/index.jsp) tab sld registration i don't see the ae neither under non-central components. If i try to register i get:
Registration of Adapter Framework with SLD was successful
Registration of fix AF adapter services with the SLD was successful
Registration of dynamic CPA cache based AF adatper services with SLD was successful
but no AAE...although it is visible in the SLD under technical systems...

Deactivate AutoComplete functionality in Integration Builder

Similar Messages

Maybe you are looking for