Deactivate Dreamweaver- Windows crashed, linux?

I have Dreamweaver CS3 installed on my computer as well as my laptop and it is essential that I have it at both because I am not able to always have my laptop with me and vice versa. A few days ago my computer crashed and I have been getting the BSOD, blue screen of death, everytime I turn on the computer and it says that my hard drive is corrupt. However, I am able to use a Ubuntu Linux start up flash drive I created a boot up the computer using Linux and access my hard drive. I was wondering if there was anyway to deactivate Dreamweaver by using Linux and somehow editing or changing the .exe file or something because I know Linux cannot open .exe files. Any help would really be appreciated because if I can not figure this out then i will lose usage in one of my computers.

You need to call support by phone. Nothing anyone here can do.
Mylenium

Similar Messages

Windows crashed, I need to deactivate Acrobat 8 to reinstall, have serial number

Windows crashed, I need to deactivate Acrobat 8 to reinstall, have serial number

You need to call support by phone. Nothing anyone here can do.
Mylenium

URGENT: Dreamweaver CS3 crashes while uploading any PHP File

Hello,
My Dreamweaver CS3 crashes everytime I try to upload any PHP
file to the Web Server. It does upload the file but crashes and you
received a "Not Responding" error in the Windows title bar. I did
search alot on this issue until I found the ".
Dreamweaver
CS3 crashes after DST ends" problem. I deleted the cache file
as required but of NO HELP.
. It is very annoying to restart Dreamweaver
everytime you want to upload any PHP file to the Web Server after
editing it. It doesn't happen with any other types of files. Please
help me guys here or I will lose my mind.

Bad news for you too.
First, you are not addressing Adobe here in the user forums.
Secondly, Adobe does not support CS3 any longer because it hasn't been sold for years.
Therefore, you're left to the good will of fellow users who volunteer their time here free of charge, if one of them has a solution to your issue. No one is under any obligation to reply, so ask nicely.
One thing I can tell you is that you have not applied any of the versions available for Photoshop. Unfortunately, the Adobe auto updater was an unmitigated piece of cr@p in any version prior to CS6. Do not rely on it to assume you are up to date just because it doesn't show any updates available to you under Help > Updates.
You need to look for the downloads and apply them manually yourself.
I can't offer any more assistance because I don't do Windows. Sorry.

Cfloop within select causes Dreamweaver to crash

Placing a cfloop tag within a select (or cfselect) tag causes
Dreamweaver to crash when the mouse is clicked anywhere within the
code window. Code as below:
(Code attached)
The cfloop was going to be used to produce additional option
elements. The option element values were to be taken from the list.
Dreamweaver won't even let you edit the statement out or
comment it because it crashes as soon as you click to place the
curser within the code window.

WaltBulawa wrote:
> As it turns out, when I replaced the <Form> with
<cfForm> and the <select> with <cfselect> the
problem was resolved.
You haven't really resolved the problem, but delayed it for
another day.
To avoid the risk of future crashes, I recommend that you
delete
WinFileCache-********.dat after closing Dreamweaver down for
the day. A
clean version of the file will be generated automatically
when you next
use DW.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Dual booting in Windows and Linux, but only Linux has calendar, TB 31.0

I'm dual booting using Linux Mint and Windows 7. I have TB 31.0 installed in each OS. TB in Linux has calendar capability; in Windows, there's nothing (by nothing, I mean no calendars - I can't see their properties, for instance, nor access them in any way).
I should add that both Windows and Linux TB programs are sharing the same profile folder (located on a separate partition), hence, all the same add-ons, passwords, etc.
The error console logs the following:
Timestamp: 14/08/2014 6:41:33 PM
Error: Components.classes[cid] is undefined
Source File: resource://calendar/modules/calUtils.jsm -> file:///P:/PortableApps/ThunderbirdPortable/Data/profile/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/calendar-js/calUtils.js
Line: 17
There are a variety of flow on errors, related to this.
My apologies for posting this in this way; I had intended to submit this via the crashreporter, but I'm having trouble getting the program to crash with this error just now.

A reply to my own question: it turns out that while sharing a profile works pretty well for most purposes, with Lightning it does not, as the extension has different Linux and Windows versions. The problem is solved quite simply: by not using the same profile for each version.
Glad to see that no one wasted time on this one (except me, of course).

Dreamweaver CS3 Crashes At Startup

I installed the CS3 web premium suite and all the programs
worked great, including Dreamweaver. After rebooting the PC the
next morning, Dreamweaver CS3 would not launch anymore. I
reinstalled DW but still the same problem. Startup gets as far as
reading the site cache and then totally disappears. I've tried
renaming/deleting the Configuration and the registry key
(HKEY_CURRENT_USER\Software\Adobe\Dreamweaver 9), and the DW8 site
caches. The other CS3 programs work fine.
What now?

I can open Dreamweaver now but I don't think the problem is
solved. Here's what happened:
I took the steps in the article you referenced and some
others, re-started the pc repeatedly with all start-up programs
disabled, and waited in vain for the promised return phone call
from a seemingly diligent guy in Tech Support. When I called Tech
Support the next day, they said that the case number and customer
ID had no reference to this problem so someone would call back. OK,
fine. I'll wait.
I did a "clean update" of ZoneAlarm, remembering that this
had solved some other problems in the past. Later yesterday, I was
cleaning up some experimental website file directories and renamed
a few of them to make more sense of what they were.
When I tried to re-open Dreamweaver later, it paused to tell
me that it could not find the directory for the site referenced in
the site definition and I should go to Manage Sites to fix it.
Since Dreamweaver had crashed repeatedly before reaching this
stage, this was a major victory. The site it was trying to open was
one that I had set up to experiment with some of the new features
in DW CS3 after the initial installation. Fortunately, it was one
that I had renamed earlier yesterday.
The offending directory contained a page with some of the new
Spry widgets (Tabbed Panel and Accordian) and a short slideshow
that I think I made using Bridge.
So, I was able to open the Manage Sites panel and point
Dreamweaver to another site definition. It opened fine and everyone
lived happily ever after.
Unfortunately, the problem is not solved -- just worked
around by coincidence.
Here is some info from the Windows Control Panel's Event
Viewer about the last time that DW crashed: Faulting application
dreamweaver.exe, version 9.0.0.3481, faulting module msvcr80.dll,
version 8.0.50727.163, fault address 0x000142f1.
Hope ths helps Adobe figure out what is causing this crash.
Now that I can open Dreamweaver CS3 and use it, I'm really
impressed with the upgrade.
Harry

Where do I look for my bookmarks for recovery on a crashed Linux machine?

On a crashed Linux machine (OpenSuse 13.1) would like to know where I can find my bookmarks to recover them. Will not boot but my be able to get in with a live CD.

Windows: %AppData%\Mozilla\
C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\
http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows
Linux: ~/.mozilla/
http://kb.mozillazine.org/Profile_folder_-_Firefox#Linux
Mac: ~/Library/Application Support/
http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac

Dreamweaver CS3 crashes HELP!

I'm working on a project in DreamweaverCS3 using Coldfusion
7.0.2.
I have a page that has some drop down menus that are
populated via a coldfusion query. When I click on the
<cfselect> statement line (I need to edit this one value to
fix the page), Dreamweaver CS3 crashes.
I have never seen this before ever. Has anyone else seen this
type of thing with there CS3?
The other thing I completely hate about Dreamweaver is when i
preview an HTML page in a browser window and sometimes when I go
back and forth between the browser and Dreamweaver, I won't be able
to save the file because I get a sharing violation error. So i have
to either wait a few minutes before i can save for some reason or I
have to shut down the browser.
I used to use Homesite and i always, always could preview in
a new browser window, make edits, and refresh the page. Life was
good. This disrupts my workflow and i think Adobe should consider
changing how Dreamweaver handles files in CS4 and hopefully do away
with this bug. Its extremely annoying and slows me down.
What sucks is i spend all of this money on CS3 Web Premium
and now i have to use wordpad to edit this file so i can move
on!

I like to use server-side includes for site wide menus, headers and footers.
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Some people like to use DW Templates to create their site pages. If you use a Template.dwt, you can put your site wide menu and other common page elements into it and they will appear on all child pages created from that Template file.
http://www.smartwebby.com/web_site_design/dreamweaver_template.asp#1
DIFFERENCES:
SSI works on the server. Edit one file, upload and you're done. Your hosting provider needs to support the use of includes in either .shtml, .asp or .php pages.
DW Templates only work in Dreamweaver sites. And you must re-publish all child pages after editing your Template.dwt file.
Nancy O.

Dreamweaver CS4 crash on swf embed/import

Hi,
I manage a classroom that uses Master Suite CS4 - the problem I am having is this - Everytime we import/embed a flash swf file in Dreamweaver, DW crashes.
We are using Windows XP SP3
Master Suite CS4
I have completley reformated one machine and installed only windows and master suite - same problem
I can hand code the embed object tag and all works fine
We have other machines in other rooms that this combination works fine in, same machines, same operating system - same Master Suite install
Any suggestions?
Thanks
Vix

Here is what I discovered to solve the crashing issue with Adobe CS4 Dreamweaver. It seems to be the contents of this folder.
Users/Yourshortname/Library/Preferences/MacroMedia/FlashPlayer/FlashPlayerTrust/
The files in here are hidden and can be seen via terminal. Once I went over every file on this machine, I narrowed it down to this folder, you can narrow it down even more and fine out which file is corrupted, I didnt have the time.
This stopped CD4 Dreamweaver from crashing on a clients mac running 10.5.8
Hope it helps
Rudy
I rarely submit stuff but this was a pain in the Axx!

Migrating code from windows to linux

Hi,
I am looking for a solution or method to migrate labview code developed in windows platform into Linux platform. The thing is we have developed instrument driver code in Windows platform and have used VISA as well for communication purposes. I've come to know about some method for such porting to follow as the project file of ours contains vi.lib stuff as well. We do have a license for both Windows and Linux versions of Labview.
Please suggest me any solution to do such porting into Linux platform if someboy have come across such things.
Thanks in Advance,
Vivek

Thanks guys for quick responses. I really appreciate your support. I tried the way you mentioned. I copied all my code into the linux system. Created new project file but again same problem occurs, labview is crashing because of VISA.
Why I am sure about the VISA is because I tried to open/create new VI in linux using VISA API's and all are creating trouble and further it leads labview to crash.
Rest all other functions in labview are working fine. Hope all my assumptions are correct and could blame VISA for creating problems.
Please do suggest us ...
Thanks in Advance,
Vivek

My Dreamweaver keeps crashing as soon as I open it

My Dreamweaver keeps crashing as soon as I open it. I'm not sure what has changed considering I was able to open it not too long ago. Suggestions? I keep getting "Crashed Thread: 0 Dispatch queue: com.apple.main-thread"
It is CS5

Which operating system?
If you recently upgraded to Yosemite, re-installing CS5 may be necessary.
First, deactivate CS5 from your Help menu.
Use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.

[685P Neo] No Hyperthreading/Windows crashes

Lo,
A while ago i purchased:
MSI 865P (MSI-6742)
Pentium 4 Northwood 2.4G FSB 800 Stepping 12
Sapphire 9600
After having a lot of blue screens/hard locks in windows even with all fixes (ACPI, drivers, bios settings, etc..) and several windows versions.
So i switched to linux. Runs stable now... so well... not a perfect solution.. but ok...
Now, i actually enabled hyperthreading etc, but i got a message telling me Hyper-Threading is disabled.
this is because
Code: [Select]
MOV EAX,1
CPUID
then EBX>>16 (or something) gives 1 (number of logical cpu's).
Now, that would mean i have a hyperthreading cpu, but it isn't enabled. This would probably be caused by the bios not having it enabled.
Tho my mainboard IS HT Ready and my CPU is a HT one too..
Got the latest bios running (6742v12.exe/v1.2/2003-9-4), but it doesn't enable HT or shows a bios option..
I hope someone can help me with this and if someone has a potential working solution for the windows crashes, don't hestiate to post so plz :D
Thanks in advance
.

Full Specs:
MSI 865P Neo(MSI-6742)
Pentium 4 2.4 Ghz (see extended CPU info)
VData 512MB PC2700 Memory [20329/VDD8608a8a-6b]
Sapphire 9600Pro
Maxpower PL-300W PSU
IBM IC35L090AVV207-0 80GB 7200RPM
MAXTOR 6L040J2 (D740X) 40GB 7200RPM
RealTek RTL-8029
RealTek RTL-8139 (on-board)
Intel C-Media AC'97 audio (on-board)
Info
I have tested the memory with memtest86 and it gave no errors.
For the CPU, the operating system reports stepping 7, tho at the startup it says Stepping 12 ?(
Extended CPU Info:
MP Table:
# APIC ID Version State Family Model Step Flags
# 0 0x14 BSP, usable 15 2 7 0xbfebfbff
Family: 15 Model: 2 Stepping: 7 Type: 0
CPU Model: Pentium 4 Xeon (Northwood) [C1] Original OEM
Processor name string: Intel(R) Pentium(R) 4 CPU 2.40GHz
Instruction TLB: 4K, 2MB or 4MB pages, fully associative, 128 entries.
Data TLB: 4KB or 4MB pages, fully associative, 64 entries.
L1 Data cache:
Size: 8KB Sectored, 4-way associative.
line size=64 bytes.
No L3 cache
Instruction trace cache:
Size: 12K uOps 8-way associative.
L2 unified cache:
Size: 512KB Sectored, 8-way associative.
line size=64 bytes.
2405.46 MHz processor (estimate).

Grub system boot messed up after windows crash

I have a dualboot system with Win XP and Arch. Yesterday Windows crashed while i was listening to music. Since then, when i boot my computer Grub throws an error message (i think it's error 17) and doesn't start the bootmanager. But if i boot from a normal Ubuntu-Live-CD an choose "boot from first harddisk" i get my grub manager and i am able to boot normally.
I tried to fix this by manually reconfigure grub like this:
1. Pop in the Live CD, boot from it until you reach the desktop.
2. Open a terminal window or switch to a tty.
3. Type "grub"
4. Type "root (hd0,6)", or whatever your harddisk + boot partition numbers are (my /boot is at /dev/sda7, which translates to hd0,6 for grub).
5. Type "setup (hd0)", ot whatever your harddisk nr is.
6. Quit grub by typing "quit".
7. Reboot.
(taken from http://ubuntuforums.org/showpost.php?p= … stcount=2)
It seems that my hdX is different to my sdX labels. sda is my linux harddisk, and sdc is my windows drive. But if i type root (hd0,0) i get "Filesystem type unknown, partition type 0x7", which means that this is an NTFS drive. So i tried root (hd2,0) (in my menu.lst, booting arch is also defined with hd2,0) and then i get "Error 21: Selected disk does not exist".
Now two questions:
1) Why is the labeling different? Why isn't sda1 = hd0 and so on?
2) How to restore my boot process? (this is slightly more important )

Alp wrote:
I think you both understood me wrong.
First, i don't need to alter the menu.lst, because grub doesn't show the boot choose menu at all. It just prints error 17 without any chance of doing something.
Second, i know the naming procedure. But obviously in my case hd0 and hd2 are switched, so that sda = (hd2) and sdc = (hd0). I don't know why.
well - you referred to 'sda1' as 'hd0' in your first post ...
as for the remapping of drives, there's always:
map (hd0) (hd2)
map (hd2) (hd0)

Dreamweaver CS3 crashes after Daylight Savings Time ends

In Windows XP x64, Dreamweaver CS3 crashes after
Daylight Savings Time ends. There is a technote that seems to
describe the situation exactly.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402776&sliceId=1
However...
1) The technote says this happens only with ASP and PHP code.
I'm using ColdFusion. (That's a minor point.)
2) The technote says...
Delete the WinFileCache-AD76BB20.dat file from the
Dreamweaver user configuration folder. Note that on Windows, the
Application Data and AppData folders are hidden by default, so
verify that your Windows Explorer folder options are set to View
Hidden Folders. The location of this file is as follows:
Dreamweaver CS3 on Windows Vista:
C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver
9\Configuration
Dreamweaver CS3 on Windows XP:
C:\Documents and Settings\[username]\Application
Data\Adobe\Dreamweaver 9\Configuration
However, I coudn't find WinFileCache-AD76BB20.dat in
Documents and Settings or in Program Files (86)\Adobe. (The 86 is
because this is a 32-bit program on a 64-bit machine, but all the
rest is the same.) I then searched both directories for *.dat and
there was no file that looked anything like
WinFileCache-AD76BB20.dat.
.Can anybody help me?
Thanks!

Alan, thanks for the suggestion.
I did the search found the file, deleted it, opened
Dreamweaver CS3, selected the same text -- and it crashed as
before.
THEN I REBOOTED and tried again - NO CRASH. So it seems that
a reboot is an essential part of the fix.
BTW: My situation fit the Technote description exactly. (1)
The crash happened when selecting -- in design or code view --
certain text in a context of HTML intermingled with ColdFusion
code; (2) I had no problem with these files before Daylight Savings
ended; (3) even after that I had no problem with them in Macromedia
Dreamweaver 8 on another machine -- the problem was only on CS3.
So the Technote is correct as far as it goes, but should be
amended as follows:
1) ColdFusion should be included in the types of code that
can be associated with the problem.
2) Instead of deleting WinFileCache-AD76BB20.dat, one should
delete WinFileCache-[whatever].dat.
3) A reboot after the deletion may be required.
Anyway, problem solved.
Thank you!

Jabber for windows crashing

Jabber for windows - crashes on start up
CUCM 7.1.3
Windows 7 32 bit
Cisco Presence   8.0.2.10000-30
- these are in the application event log
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:19 PM
Event ID:      11729
Task Category: None
Level:         Information
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Product: Cisco Jabber -- Configuration failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">11729</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:19.000000000Z" />
    <EventRecordID>35189</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>Product: Cisco Jabber -- Configuration failed.</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
    <Binary>7B45353431313243312D463832412D343834372D383633312D4341313833384541353442347D</Binary>
</EventData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:18 PM
Event ID:      11706
Task Category: None
Level:         Error
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Product: Cisco Jabber -- Error 1706. No valid source could be found for product Cisco Jabber. The Windows Installer cannot continue.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">11706</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:18.000000000Z" />
    <EventRecordID>35188</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>Product: Cisco Jabber -- Error 1706. No valid source could be found for product Cisco Jabber. The Windows Installer cannot continue.</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
    <Binary>7B45353431313243312D463832412D343834372D383633312D4341313833384541353442347D</Binary>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-Windows-RestartManager
Date:          6/27/2012 10:43:15 PM
Event ID:      10000
Task Category: None
Level:         Information
Keywords:
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Starting session 0 - ‎2012‎-‎06‎-‎28T02:43:15.619915900Z.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
    <EventID>10000</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:15.620916000Z" />
    <EventRecordID>35187</EventRecordID>
    <Correlation />
    <Execution ProcessID="8160" ThreadID="8616" />
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<UserData>
    <RmSessionEvent xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
      <RmSessionId>0</RmSessionId>
      <UTCStartTime>2012-06-28T02:43:15.619915900Z</UTCStartTime>
    </RmSessionEvent>
</UserData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:15 PM
Event ID:      1040
Task Category: None
Level:         Information
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Beginning a Windows Installer transaction: {E54112C1-F82A-4847-8631-CA1838EA54B4}. Client Process Id: 8400.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1040</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:15.000000000Z" />
    <EventRecordID>35186</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>{E54112C1-F82A-4847-8631-CA1838EA54B4}</Data>
    <Data>8400</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:14 PM
Event ID:      1001
Task Category: None
Level:         Warning
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Detection of product '{E54112C1-F82A-4847-8631-CA1838EA54B4}', feature 'Cisco_Jabber_Files' failed during request for component '{14F2AABC-F10C-4DE6-BC0E-28ED6D7F8508}'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:14.000000000Z" />
    <EventRecordID>35185</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>{E54112C1-F82A-4847-8631-CA1838EA54B4}</Data>
    <Data>Cisco_Jabber_Files</Data>
    <Data>{14F2AABC-F10C-4DE6-BC0E-28ED6D7F8508}</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        MsiInstaller
Date:          6/27/2012 10:43:14 PM
Event ID:      1004
Task Category: None
Level:         Warning
Keywords:      Classic
User:          WGL\bfairchild
Computer:      CORPLAPR8YK305.corp.wgtnet.com
Description:
Detection of product '{E54112C1-F82A-4847-8631-CA1838EA54B4}', feature 'Cisco_Jabber_Files', component '{826A7892-74F0-481D-B5F2-3F733F91DB81}' failed. The resource 'C:\Program Files\Cisco Systems\Cisco Jabber\JabberMeeting\DesktopShare\atgpcdec.dll' does not exist.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1004</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-06-28T02:43:14.000000000Z" />
    <EventRecordID>35184</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CORPLAPR8YK305.corp.wgtnet.com</Computer>
    <Security UserID="S-1-5-21-867046329-488861948-689510791-2168" />
</System>
<EventData>
    <Data>{E54112C1-F82A-4847-8631-CA1838EA54B4}</Data>
    <Data>Cisco_Jabber_Files</Data>
    <Data>{826A7892-74F0-481D-B5F2-3F733F91DB81}</Data>
    <Data>C:\Program Files\Cisco Systems\Cisco Jabber\JabberMeeting\DesktopShare\atgpcdec.dll</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>

Hi,
Jabber is attempting to repair itself from a conflict with the WebEx productivity tools. However, it is looking for the original install file (.msi), cannot find it and therefore the repair fails. To work around this problem you need to:
1 - Download the same version of CiscoJabberSetup.msi that is installed. You can check the version by finding CiscoJabber.exe in your Program Files directory, right click, Properties and on the Details tab there is a product version.
2 - Copy this file to the location fro which you previously installed Jabber. For example, if you downloaded the .msi to your desktop previously, do the same here again. If you got this update as part of an auto update, then copy the file to "%temp%".
3 - Launch Jabber - it should successfully repair itself and launch.
Thanks,
Rob.

Deactivate Dreamweaver- Windows crashed, linux?

Similar Messages

Maybe you are looking for