Deactivate integration via feature 'PLOGI'.

Hi all,
Kindly how i can deactivate integration for any persons via feature 'PLOGI'.
Thanks&Regards,
-Suresh Revuru

Hi,
Just remove X from the Operation &PLOGI of Feature PLOGI.
&PLOGI= ,
Hope this would be help.
Thanks

Similar Messages

After upgrade to iOS 7.1 calendar integrated via caldav is no longer available

Hi,
We use several iOS devices in my family and we share a calendar sitting on our home NAS (Synology). The calendar is integrated via 'caldav'.
This worked fine for a long time (also using the latest iOS 7.0x versions).
However, after upgrading the devices to iOS7.1 we have one iPhone5 that no longer shows the shared caldav calendar. In setting the calendar shows up and the connection can be validated successfully. However, the calendar app does not show this shared family calendar. As it would not have been configured.
On the other devices the calendar works fine.
The phone not showing the calendar is also syncrhonized with an additional MS Exchange calendar. This still works fine. I mentioned it because this is something that is different compared to those devices that still show the shared caldav calendar.
Does anybody has an idea about how to fix this situation?
Is there any workaround to make the configured, shared caldav calendar visible in the calendar app?
Regards,
Martin

Update: This was caused by a hardware failure of the Touch ID and just happened to coincide with when I did the update. Got my phone exchanged today and everthing is working properly.

Can you deactivate the phone feature and still use an iphone?

Can you deactivate the phone feature and use an iphone as an ipod touch and still sync with iTunes?? I would like multiple answers so I can compare.
Message was edited by: theharrypottergeek

You can remove the SIM card to prevent any cell phone services and use the iPhone as an iPod Touch.
You can cancel your service with AT&T or use the SIM card with another phone, or get a new phone with AT&T using the SIM card that shipped with the new phone to activate phone and use the iPhone as an iPod Touch.
In order to install a firmware update on a no longer activated iPhone, or restore a no longer activated iPhone with iTunes if wanted or needed, the no longer activated SIM card must be inserted in the iPhone to complete the process - the SIM card that was used with the iPhone when it was activated.

ERP-integration via middleware

Hi,
It is possible to create a wbs-element for a campaign element without creating a wbs-element for the campaign when using ERP integration via middleware (automatic on releasing)? We are in addition using the badi for checking on campaign type and tactic.
Regards Camilla

Hi,
would not think that they actually need access to your production systems but rather a replica that is as close as possible in all aspects. If access to the production system is required, then set up a totally read only groups and assign the individual integrators to those groups.
There are a couple of ways that the issue of responsibility for interfaces/integration can be handled.
One is to have the Implementer agree to provide the services to do the analysis (requirements and functional) and then to develop, test and resolve any issues from the tests. However, this will require that they be come "experts" in your legacy system and add to the total cost of the implementation of the ERP.
Another is to have your internal IT Department take on the management of this part of the project to include analysis (requirements and functional) and then to develop, test and resolve any issues from the tests. There are some benefits to this. First they have the expertise in the legacy system and second, it will allow them to learn the ERP system more intimately and provide the opportunity to become experts there as well. Some drawbacks may include the learning curve for the new system and its technologies (this can be remedy by bringing in short term technical consultants that have experience in the technologies to help during the development of the interfaces/integrations and provide "training").
One other way is to just bring an "integrator". But, again, the integrator may need to become experts in both systems and this adds a little more to TCO.
No matter what you, or your company, decides to do, remember, the more you do up front (analysis and design) the less that needs to be done on the back side (development and testing) and the easier the project will go.
Reward points if found helpfull..
Cheers,
Chandra Sekhar.

How to deactivate logging via brtools

Hello
I wander how to deactivate logging via brtools(640)
regards

hello,
Can u pl specify by logging what do u exactly mean?
I want to know if u meant to prevent users from logging to the database
or u want to deactivate the archivelog mode.
In the first if u want no user interaction on the database then take the database to mount mode instead of open mode by executing the following SQL
ALTERDATABASE MOUNT;
In the second case, if u want to turn the archivelog mode then do what VAle has suggested. But taking the database to nolog mode has a lot of serious demerits in the context to recovery and restoration of database in case of a crash. U wont be able to get the archive logfiles as the redo logfiles are over written in case of the database is in nolog mode.
So think twice before u take the database into nologmode.
Regards

Dump is program RIMODAC2 - Activate/Deactivate integration model

Hi APO guyz...
Background job of program RIMODAC2 - Activate/Deactivate integration model fails with following error "TSV_TNEW_PAGE_ALLOC_FAILED"..
Can somebody tell me what is the reason behind that and how can we resolve it...
Thanks a lot !!
- D

job in failed with a memory space problem or too many orders are read.Generally when reading large datasets of the table a short dump occurs with message TSV_TNEW_PAGE_ALLOC_FAILED.
Please rerun the IM model , it will resolve the issue or split IM data into 2/3 IM so that volume is distribute which may resolve your problem.
Also if IM is set up for all the object together , please split IM for individual object.
If problem still persist than check for OSS message.
Note 903715 - Initial data transfer: TSV_TNEW_PAGE_ALLOC_FAILED
Note 137932 - Short dump TSV_TNEW_PAGE_ALLOC_FAILED in LCOIAU05
Manish`

Exchange Integration: Which features accessed directly from Lync Client, which via Lync Server

Hi
I'm wondering which Features of the Lync Server 2013 <-> Exchange 2013 Integration are accessed directly from the Lync 2013
Client (direct Access from the Lync Client to the Exchange Server) and which Features are accessed from the Lync Client via the Lync Server (Access from the Lync Client to the Lync Server to the Exchange Server).
For example: Are Outlook contacts aquired directly from the Exchange Server when searched in the Lync Client.
Thanks,
Michael

Yes, Outlook contacts acquired directly from the Exchange Server when searched in the Lync Client.Integration between Lync and Exchange will give many features as following:
Voice mail.
Lync Archiving Integration.
Unified Contact Store.
Lync Meeting Scheduling from OWA.
High resolution photos.
Also you can refer below link for more info.
http://technet.microsoft.com/en-us/library/jj688098.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Content Server & cFolder Integration via Different Application

Hello,
We have cFolder 3.1 and content server. cFolder and Content Server is integrated. User can add file via cFolder & this file will be visible in cFolder.
But Customer has a different requirement.
They want to upload files to content Server Directly(ie not thru cFolders) using a web dynpro application, after uploading, a Document Link needs to be created in cFolder linking to Content Server. (Please note that this has to be document link and not a Bookmark/Hyper Link ). So that customier will still be able to use his API for reading the file content.
Can you plrease suggest the way forward?
Regards
Geogy

Hi Geogy,
I think you can try the following way for this:
You need to be able to call the API CFX_API_DOC_CREATE, while uploading the document in the webdynpro application. While creating the document, you can provide the URl instead of original file path and save it.
thanks,
rajesh.

Integration via Services

I will make an integration between an ERP system and a WMS.
This integration will be made via services, or when I need to send information from ERP to WMS, the ERP will draw on my ALDSP a service that will map the parameters of the Webservice (XSD) that were sent by the ERP to the fields of WMS, which in the case will be a Procedure.
I wonder what is the best way to map the fields of XSD for the fields of procedure, I know I have to use xQuery, but I use logical data services or models for this? I need also to do some testing before calling the procedure, such as whether a field has size X, if not, I trunc it.
What would be the best way that I do this with Data Services? The reverse also happens.

Hi Daniel,
please look into the AC 5.3 Configuration Guide, there you will find all web services available for AC.
But the web services were designed for a direct integration to an ID Management system so you have to check yourself if these web services will help you.
Best,
Frank

Desktop Integration Suite Feature

Hi All,
We have user requirement where in when user drags and drops a file in UCM using DIS from Windows explorer, metadata screen and the file that is dragged in should open side by side so that user can look in the file and input the metadata fields. We can make metdata prompts but file does not open(i think file is not in UCM yet). Is there any setting in UCM or DIS where file opens along with metadata when user drags the file?.
Any help in this regard is appreciated.
Thanks.

There are two ways that you can try:
1) Try ODDC. It seems exactly what you need considering the Xerox example you mentioned. You will need to write a mapping of ODDC vs UCM metadata.
In ODDC, you can scan or import files from a location, to create a batch. Users then click on the batch - to see ODDC metadata & the batch pages side-by-side.
User fills in metadata and then submits the batch [*INDEXING*]. The batch then gets checked into UCM, based on defaults/metadata mapping set in ODDC.
You can further write a custom UCM checkin filter to take control of metadata/security that gets applied on the checked in file.
2) Use DIS latest build. in Content Info page, provide a link to view the web-viewable file in the Preview Pane itself.
Users can then right-click and use the new "Update Metadata" feature. (However it has a bug that it updates the Release Date!!!)
I recommend first way. And indeed, the Kofax is market leader in this category but over-kill for sporadic usage.
With ODDC, you can also write integration very easily using .VBS scripts that can be hooked at various events inside ODDC. We wrote one that uses IdcClientUX.ocx to talk to UCM, while document is being INDEXED
Our users are loving it, to say the least. It's fast and easy to deploy for new users/workstations as it web-based.

Vmware Vcenter Integration via Orchestrator

Hi Folks,
I have a Vmware Vsphere server..
I m trying to check the connectivity via Scom Orchestrator, but the connectivity is failing.
If i run any runbook automation, it says unable to connect to remote host,
Please suggest..
I cannot able to connect to remote host ( I cannot connect to my VM Vsphere server).
Regards,
Vinay.

H Vinay,
do you use the System Center 2012 R2 Integration Pack for VMware vSphere (http://www.microsoft.com/en-us/download/details.aspx?id=40874)?
To which Version of VMWare vSpehre do you connect? Can you paste the connection settings you defined for the connection?
Note that there is also an IP for VMWare from community:
http://scorch.codeplex.com/releases/view/74834
Regards,
Stean
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

What is new AT&T iPhone MMS date? I see integrated messaging feature

Okay, I heard that this was to happen at then end of Summer, then end of July.
So what is the new date? I see Integrated Messaging counters in my AT&T profile as of this week.
Should we expect another update to sync with iTunes to get it working?

Funny. I'm going to mark this question as answered -and this last post as funny.
I hope it isn't sarcasm, cause my sarcasm detector runs on Windows 7 and I currently have my VMware Fusion session powered off.
The heart of my question was really the "integrated message" counter in my AT&T profile. I was hoping to hear others just got it, or don't have it, or when they got it, and they I could magically extrapolate a new MMS rumor date.
Anyway, I don't have to go to UK (although a good choice), cause Rogers in Canada has MMS already.
One Mac. One World.

How can I keep my child from UNBLOCKING contacts or numbers I have blocked? I know in restrictions when you disable account changes at least on ios 6,this greyed out the iMessage button so the kids couldn't deactivate their text feature.

Here's the issue. Kids got themselves into some trouble on iPods. We set all restrictions any turned off iMessage etc, which I noticed they can't turn back on bc it's gray with the don't allow account changes set. BUT, it still allows Wi-Fi to be turned on and off! How can I disable them being able to turn that on wo asking me?? In ios 7, the blocking feature, fabulous, BUT, how can I keep the kids from UNBLOCKING numbers I have blocked? What I am looking to do actually is allow my kids to be able to text family but block everyone else. And ask me to turn on wi fi. How and can this even be done? Right now my d text is turned off completely. And she knows the inside and out of her device so she can turn wi fi on herself. On vacation she entered the wi fi code of our condo and so I did forget network, which didn't work and wi fi kept connecting anyway wo requiring password again! HELP! Thanks :) Also, they have iPods now but am asking these questions based on them getting our 4s's with ios 7.

TeresaBoo, I empathize with your dilemma and have a similar problem. I'm trying desperately to keep my teenage daughter away from a controlling and abusive boyfriend. Of course, she is in denial and thinks it's love. Sure, I can block text messages through our wireless provider, but iMessages run on an independent network. I can block a phone number from iMessaging on her phone, but she can unblock it just as easily. I wish there was some way for parents to create a password to protect settings. Don't let negative comments get you down. Honestly, if someone can't relate to your question or offer help, why are they even bothering to comment??

SNC/ECC Integration via XI standard content

Hi Everyone,
We are trying to integrate an SNC system (formerly known as ICH) with backend ECC systems and have the following questions:
1) Modifications to XI delivered Content
I understand that it is best practice to copy XI delivered content into our own namespace and make modifications from that point on. For messages coming from SNC via ABAP proxy into XI, it is still coming in on the SAP namespace, which seems to be hardcoded in SNC. What is the correct way to work with SAP delivered content in XI?
2) Content based receiver determination
We have installed the SNC XI content into our systems, but in the SLD it does not show up under the SWCVs for our SNC system. This is stopping us from doing content based receiver determination as the dropdown for the filter page is throwing an error that the content is not installed. Has anyone come across this issue?
Thanks
Peter

Hi,
1. Modifications to XI delivered Content
Yes, its preferrable to copy XI delivered content into your namespace and make modifications in it. But if the messages are comming to SAP namespace then you can just re-use the Message Mapping with the Message type from SAP namespace and in it make the further configurations such as receiver communication, receiver determination etc .accordingly.
2. Probably you have to use it with SAP Product only, as its not available under the Product designed by you and the the your namesapce and the other one are different. so try to configure the Receiver determination for SAP namespace only.
Thanks
Swarup

CS / SD order integration via operations

How I get operation line from CS order to SD order 1:1, but not join together to one line SD order? For example the same as components.
Thanks
Jan

Hi Jan,
If I understand your question correctly you want all the components in your CS order to come in sales order instead of all being clubbed under one material code. Is that correct ?
You will have to juggle around in DIP profile to deactivate the current settings if the behaviour is what I have assumed. The T code is ODP1.
Cheers,
Kartik Shah

Deactivate integration via feature 'PLOGI'.

Similar Messages

Maybe you are looking for