Deactivate New General Ledger

Is it possible to deactivate the New Ledger when you have started to implemented it? In fact, we did not  migrate the data.
If yes, how ?
Please know that we did not  migrate the data. For the moment,  we have just activate the New Ledger and we would like to deactivated it.
Thanks in advance.

Hi Allal,
Please consider all the information below if you are talking about your test/dev system, if it is production you sould better contact a FI-GL-FL SAP consultant.
Once there is document posted, it cannot be deactivated and you would receive FAGL_LEDGER_CUST136.
The posted document and all relevant documents (may exist in CO, MM and other compoents)
need to be deleted. This is not a easy job, needs to be analyzed case by case.
Have you made any postings yet in your development system since the activation of NewGL?
If so then after deactivation of NewGL it might be an idea to delete your test data up to that point and start again as it may cause problems for your testing.
For de-activation: Please use the transation: FAGL_ACTIVATION and untick the box.
After, please READ the documentation carefully from the warning message.
You must run reports RFAGL_SWAP_MENU_OLD & RFAGL_SWAP_IMG_OLD in the 'classic GL' client to switch on the old IMG & SAP menu. Then you are able to turn off  NewGl in IMG - Financial Accounting - FA Global Settings.
Also:
The settings for the IMG & menu are not client specific which means you can run these reports in any of this clients.
I hope it helps you
Best Regards,
Vanessa Barth.

Similar Messages

  • Deactivate new General Ledger Accounting in ECC 6.0

    Hello All,
    I have activated the new gl accounting by following path tcode>spro>fi accounting>fi accounting general settings>activate new gl accounting.
    How to deactivate the same????
    Thanks,
    Sunny

    You can use the transaction code FAGL_ACTIVATION to deactivate New GL
    I hope its answer your question

  • De-activate the New General Ledger Accounting

    Dear All,
    I would like to inform to you all that I had activated the "New General Ledger Accounting through the T.code: FAGL_ACTIVATION in the sand box client".
    Now I would like to de-activate the function. Because, it gives some inconveience that the company has upgraded to ECC 6.0, but does not use the New GL concept.
    What should I do for this de-activation?
    I request you all, please kindly help in this regards.
    Thanks with regards,
    Ran

    Hi,
    I am trying to deactivate the New GL but getting an error "view/table v_fagl_activec can only be displayed and maintained with restrictions."
    Please help to resolve this problem
    Regards,
    Narayana

  • 0FIGL_V30 only usable for the new general ledger?

    Hello,
    I activated the business content for the cube 0FIGL_V30 / 0FIGL_M30, it looks very interisting, but I am not sure if this cube also run when we use in SAP R3 the old general ledger.
    Can some one answer me, is the business content cube 0FIGL_V30 only usebal when we use in SAP R3 FI the new general ledger?
    Best regards
    Markus

    Hi,
    I am trying to deactivate the New GL but getting an error "view/table v_fagl_activec can only be displayed and maintained with restrictions."
    Please help to resolve this problem
    Regards,
    Narayana

  • Posting of CarryForward New general ledger

    Hi financial wizards,
    our client uses new general ledger. The accounting block has been extended with some ZZ user fields carrying results determined via substitution exits during posting.
    The additional customer fields are added to the accounting block and are stored on item level (BSEG) as on aggregate level (FAGLFLEXT).
    After the run of transaction FAGLGVTR - 'Balance Carryforward (New)' we have the correct values in the carryforward column of the target account, but values from customer fields are not transfered.
    SAP will not help us with a note at this time; the features may be integrated in a later release.
    Now my question: How to post the carryforward values manually or by program? I know the SAP Carryforward does not create any documents but after the run the Carryforward period (period 0 in former times) is filled with the sums of previous years P+L accounts. Carryforward works correct i.E. for profit center but not for the additional clients fields.
    We need some good ideas as how to overcome this      obstacle.
    Regards,
    Clemens

    Dear Peter,
    I am afraid that you are mistaken. There is lot of difference between the New GL Accounting and COPA. They are entirely different and its utility is also different.
    Here in New Gl, Characteristics means, segment characteristics, for example, business area, profit center, functional area, segment.
    Trust this answers your query!
    Cheers,
    Ashok SINGH

  • New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

    hi,
    I already create new transaction code and report from standard transaction code
    *s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
    also add Profit center fields into Dynamic selection.
    My problem is, if i run the report using customer account the output is displayed but
    if i run the report with customer & profit centre the output is not displayed. currently i'm using
    new General ledger accounting in ECC 6.0 and when i look into bsid table the value
    is empty for profit centre and the value for profit centre are stored in new table
    FAGLFLEXT.
    do i miss something?
    thanks.

    s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

  • Extraction Line items New General Ledger

    Hi all,
    I want to extract the new-General Ledger document line items. However we are not on the correct enhancement package yet on SAP ECC. So we don't have datasource 0FI_GL_14 yet.
    Until we have this new extractor I want to create a full load of a part of the GL (a selection on some profit-centers in the FAGLFLEXA).  Has anyone experience with a custom extraction of the line-items New GL?
    I think a need an outer join of the FAGLFLEXA-BSEG/BKPF. However I cannot use BSEG in an Infoset-query. Doing this join in BW is not an option because I need a field in the BSEG which is not delta-enabled...
    Any ideas?
    Is there a way to get the 0FI_GL_14 before we are on the right enhancementpack in SAP ECC?
    Thanks for your help.
    Regards, Guus

    Hi,
    Ideally we shoulld be in EHP3 in R/3 to make this extractor available.
    But you can try by creating custom extractors and merging the data in a DSO.
    -Vikram

  • New General Ledger Documentation

    Hi Experts,
    Could you please kindly send to [email protected]_ the New General ledger documentation and configuration?
    I really appreciate it and will assign full points.
    Thanks in advance.

    hi ,
    hey pls forward to my email adddress also at   [email protected]..
    ranjit

  • New General Ledger

    Hi FI Gurus,
    Could you please help me & provide New General Ledger configuration and Documentation pdf, also please forward it to my email [email protected]
    Regards
    Rajesh

    Hi Hari,
    can u please send me the material. even i need that material. Mail id [email protected]
    Thanks in Advance
    regards
    Silky

  • Liquidity Planner and New General Ledger

    Dear all
    We are in the process of implementing Liquidity Planner and would like any informaiton related to this which may be of help, particularly related to intergration with New General Ledger and providing cash flow statements for segments and profit centres.
    Many thanks
    PRG

    Dear Bernd,
    <b>Document Splitting:</b>
    http://help.sap.com/saphelp_glossary/en/35/88d1bbd1952050e10000009b38f982/content.htm
    An automatic procedure for organizing line items in the document according to selected dimensions (such as organizing receivable lines by profit center). Moreover, you can effect a zero balance setting for selected dimensions (such as profit center or segment). The zero balance setting causes additional clearing lines to be generated on clearing accounts in the document after the document has been created.
    For example, the document splitting procedure is necessary for drawing up financial statements for the selected dimensions.
    <b>Document Split Account:</b>
    http://help.sap.com/saphelp_glossary/en/35/26c626afab52b9e10000009b38f974/content.htm
    A special account that must be created in financial accounting for posting payroll results to accounting. The partial totals for all documents in a posting run are posted to this account.
    <b>Document Splitting Characteristics:</b>
    http://help.sap.com/saphelp_glossary/en/10/046cfff732584989de50edd6fdc1e3/content.htm
    Account assignment object for which document splitting can be performed.
    This characteristic generally corresponds to a field in the data structure of the general ledger.
    Examples of document splitting characteristics:
    Profit center
    Segment
    Business area
    Customer field
    Other characteristics (characteristics that are relevant for application components that receive documents from General Ledger Accounting, such as Controlling). 
    Hope this will help.
    Regards,
    Naveen.

  • GRC and New General Ledger

    Hi,
    I have one very general question, which is not related to any specific
    SAP GRC product.
    Do you see any connection between the SAP GRC products (e.g. Access Enforcer, Risk Management etc) and the "New General Ledger"?
    Are there any risk and compliance relevant issues in the new general ledger, which can be managed using the SAP GRC products?
    Many Thanks
    John

    Dear Bernd,
    <b>Document Splitting:</b>
    http://help.sap.com/saphelp_glossary/en/35/88d1bbd1952050e10000009b38f982/content.htm
    An automatic procedure for organizing line items in the document according to selected dimensions (such as organizing receivable lines by profit center). Moreover, you can effect a zero balance setting for selected dimensions (such as profit center or segment). The zero balance setting causes additional clearing lines to be generated on clearing accounts in the document after the document has been created.
    For example, the document splitting procedure is necessary for drawing up financial statements for the selected dimensions.
    <b>Document Split Account:</b>
    http://help.sap.com/saphelp_glossary/en/35/26c626afab52b9e10000009b38f974/content.htm
    A special account that must be created in financial accounting for posting payroll results to accounting. The partial totals for all documents in a posting run are posted to this account.
    <b>Document Splitting Characteristics:</b>
    http://help.sap.com/saphelp_glossary/en/10/046cfff732584989de50edd6fdc1e3/content.htm
    Account assignment object for which document splitting can be performed.
    This characteristic generally corresponds to a field in the data structure of the general ledger.
    Examples of document splitting characteristics:
    Profit center
    Segment
    Business area
    Customer field
    Other characteristics (characteristics that are relevant for application components that receive documents from General Ledger Accounting, such as Controlling). 
    Hope this will help.
    Regards,
    Naveen.

  • Bapi for posting FI documents for new General ledger accounting

    Hi,
    We have a requirement for posting FI documents for new General ledger i.e for transaction FB01L. Is there any BAPI for the same so that BDC can be avoided.
    The BAPI "BAPI_ACC_DOCUMENT_POST" is used for FB01. Can we use it for FB01L?? As in this BAPI ledger group field is not there. Please suggest.
    Thanks in advance.
    Regards,
    Gaurav

    Hi Sandra,
    Solved myself using the below options.
    If you are using the BAPI - BAPI_ACC_GL_POSTING_POST, you can pass accounting principle field in importing structure BAPIACHE08. The relation between Legder group & accounting principle has to be configured in SPRO by FICO consultant. Once they configured in the system, get the accounting principles and then pass the accounting principle .
    Code:  s_documentheader-acc_principle  = wa_header-acc_principle.
    Reward me if this will help you.
    Thanks,
    Yerukala Setty

  • Migration to New General Ledger Accounting

    < MODERATOR:  All points have been UNASSIGNED and the message locked.  Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums.  If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.>
    Hi,
    can any one send me the documents related to Migration to New General ledger accounting new concept in sap ecc 6.0. and also docs related with this concept like segment, business area, profit center accounting.
    email - [email protected]
    Thanks
    Devendra Saboo

    Hi Supriya gaaru
    pls send me too the docs
    [email protected]
    and
    [email protected]

  • Active new general  ledger accounting

    Dear all,
    We use SAP several years, after we upgrade to ECC5.0, I would like to active new general ledger accounting. In the SAP training material (AC210), it said that this action should be performed at new year, not mid-year. however, if I active it, what should I considering? or we can not do that?
    thanks
    Ben Wu

    Hi,
    The New GL a/c has some unique features such as document splitting so that the asssignments to the Business -area [ for example] will be balanced.If this is activated in the year beginning the assignments will be consistent.The Business _Area Balance sheet will be a balanced one.On the other hand,if you activate in the mid-year [ after the commencement of the posting documents] this consistency will be lost[ as the already posted documents will be deprived of the New-GL a/c advantages;thus rendering the advantage of NEW-GL ineffective.
    Hope this helps.
    Regards,
    Ramesh

  • Bulk move of cheques to new general ledger Account

    In my work I have been required to bulk move cheques from a particular GL account to the correct Account.  I can do this manually which is extremely time consuming typing in each cheque transaction to a new cheque clearing Account.
    What is the quickest way of doing a bulk move so that the left hand indicator icon in I think F-03 changes from RED to GREEN. 
    Can someone please help me the version of Sap is R 3

    Hi,
    Important OSS notes concerning New General Ledger (NewGL) in mySAP ERP :-
    • 741821 Release limitations concerning SAP ERP 2004
    • 756146 mySAP ERP NewGL: General information
    • 779251 mySAP ERP NewGL : Parallel accounting
    • 862523 mySAP ERP NewGL : new functions as of SP 10
    • 890237 New GL with document splitting: Legacy data transfer
    • 891144 New GL/document splitting: Risks of subsequent changes
    • 918675 Basic architecture of the NewGL accounting
    • 812919 mySAP ERP NewGL : migration
    • 826357 Profit Center Acc. and NewGL in mySAPERP
    • 852971 SEM-BCS: Integration with the NewGL
    • 820495 mySAP ERP New GL: Data volume and parallel ledgers
    Rgds.

Maybe you are looking for