Deactivate phone buttons in IC_agent

Hi,
How I can deactivate phone buttons in business role IC_agent?
I can not find necessary entries in function profile WBAR.
Denis.

Hongyan,
Yes, I use profile: ICCMP_BP_SEARCH/BuPaSearchB2B
Button 'Reset' is accessible only then I start to search business partners.
I dont see button 'reset' after I finded or after I confirmed business partner.
I see these buttons (initial state):
Search account, Reset, Clear, New.
After confirmation or after then I find partner (before confirm) I see these button:
Confirm, Save (dark), Cancel (Dark), Related, Edit, Clear
I can not see button Reset!
Why?
Denis.

Similar Messages

Error while updating phone button template in CUCM 8.6

Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
Vivek

I'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Have you attempted a restore?

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

Button Templates in database not shwn in CUCM admin Phone Button Templates

Hi,
I was looking around the database of CUCM (v8.6), and i have found some gap between the 'phonetamplate' table and the "Phone Button Templates" page. Following items are not shown in the front-end:
StandardCN622
Standard_Cisco_TelePresence_400
Standard_Cisco_TelePresence_200
Standard_Cisco_TelePresence
Standard Usage Profile
Default VGC Virtual Phone Template
Is this normal behavior? Is there any explanation why?

Hi Anthony,
I think there was device pack installed (cmterm-devicepack8.5.1.14059-1.cop).
How does it explain the gap?
admin:show version active
Active Master Version: 8.6.2.23900-10
Active Version Installed Software Options:
cmterm-8961.9-1-1SR1.cop
cmterm-7937-1-4-5-7-SCCP.cop
cmterm-9951.9-1-2.cop
po-locale-de_DE-9.3.3.1000-1.cop
cmterm-7945_7965-sccp.8-3-5.cop
cmterm-9971.9-3-4-24.cop
cmterm-9971.9-0-09-2dev.cop
cmterm-dx650.10-0-2-24.cop
cmterm-8941_8945-sccp.9-3-4-17.cop
cmterm-7945_7965-sip.9-3-1SR2-1.cop
cm-locale-de_DE-8.6.2.1000-1.cop
cmterm-7945_7965-sccp.9-3-1SR1-1.cop
cmterm-7945_7965-sip.9-3-1SR1-1.cop
cmterm-9951.9-0-1SR1.cop
cmterm-9951.9-0-4.cop
cmterm-69xx-sccp.9-2-2-6.cop
cmterm-7925-sccp.1-3-4SR1.cop
cmterm-9951.9-0-1SBE-10.cop
cmterm-9971.9-3-2SR1-1.cop
cmterm-7942_7962-sccp.9-2-1.cop
cmterm-8961.9-3-1-33.cop
cmterm-7940-7960-sccp.8-1-2.cop
cmterm-9951.9-1-1SR1.cop
cmterm-8961.9-0-1SBE-10.cop
cmterm-roundtable-901-super-7.cop
cmterm-8961.9-3-4-24.cop
cmterm-9971.9-0-3.cop
cmterm-7945_7965-sccp.9-3-1SR2-1.cop
cmterm-9951.9-0-09-2dev.cop
cmterm-69xx-sccp.9-0-2-s.cop
po-locale-zh_CN-9.1.1.1000-1.cop
cmterm-8961.9-0-4.cop
cmterm-9971.9-1-2.cop
ciscocm.refresh_upgrade_v1.1.cop
cmterm-9971-repartition-all.cop
cmterm-9971-repartition-4.cop
cmterm-7945_7965-sccp.9-1-1SR1.cop
cmterm-devicepack8.5.1.14059-1.cop
cmterm-8961.9-3-2-10.cop
cmterm-9971.9-0-4.cop
cmterm-69xx-sccp.9-1-1-sr2.cop
cmterm-9971.9-2-2.cop
cmterm-9971.9-0-0-46dev.cop
cmterm-7945_7965-sccp.9-0-2SR2.cop
cmterm-9971.9-0-1SBE-10.cop
cm-locale-hu_HU-8.5.1.2100-1.cop
cmterm-8961.9-1-2.cop
cmterm-bfcp-e.8-6-2.cop

7941 Phone Button template on CCM 4.2(3)

Hello,
Has anyone got an overflow error message when trying to ad the customized 7941 phone template on CCM 4.2(3) devpack 3.3?
By default, the standard 7941 phone button template come with 1 Lone and one speed dial, but our environment here need a two-lines phone. While ny other model can have several version customized button templates but no 7941. Please kindly sugest on what I should check in order to acheive adding the 7941 phone button template.

Hello all,
I have let the TAC engineer and Developers took care over the case and they solved this issue for me already. The problem is a missing of line 2 record in standard 7941 Phonebutton SQL table. If you already have your case opened please refer the case number 604361587 to your TAC engineer so he/she can contact the one that took care over my case for the solution.

My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
Thank you, Neil.

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

Phone buttons not work when charging

I have Nokia Lumia 900..   When I hook the phone to the charger, the phone is disabled... you can't push up the wallpaper to use the phone buttons on the start screen. If you disconnect it from the charger, it works fine. I have done a hard phone reset and it has been updated to the lastest update available for the phone. The hard reset did not help... . Some one here said that it should not be doing that... it should be working on or off the charger. I talked to AT&T who is my phone provider and they say that this is normal... that while it is on the charger, it is disabled.
   So, Nokia, is this normal or is this a defect??? If I need to use the phone, I have to disconnect from the charger, use the phone and then plug back in. I don't like phone being disabled...  Nokia, if this is not supposed to happen, I will need something to show AT&T in order to get phone replaced ... or is there a place I can take phone to in order to get replaced or fixed where I do not have to leave the phone.. I need my phone..
   ALSO, something I do NOT like about the phone and am more convinced that I need to change to a different phone when my year with this phone is up... I do NOT like that you can't save info from your phone onto the Sim Card.. this is crazy... Why would you make a phone you can't back up your info onto a Sim card... I may not always be at a computer... This should be fixed... You should be able to move information from the phone to the sim card and move the sim card to the phone... I know you can move stuff to the phone from the sim card, but I want the function of moving to the sim card also.
      But right now.. I need to know if this phone being disabled when on the charger is a defect or is it supposed to do that...
thank you
Barbara

I haven't tried different locations.. I will try that next time I need to charge the phone. I usually plug into electricity because it charges faster than connecting to pc. I bought a second data cable for charging the phone and most of the time, I use it when charging. If I charge at night, I use the one that came with the phone and hook to electricity... I keep one cable in bedroom and one in living room near computer ... and most of the time, am charging in living room... The only time I hook to computer is when I need to do phone update or if I want to transfer a pic to the phone for wallpaper or to attach to person's number ... Or I have added ringtone.    I will try the other cable and will try when connected to pc.   I do know that the cable I use to charge it in living room doesnt work to do update on phone.. I had to use the original cable to do the update the other day.   If this orginal cable goes bad (which we all know happens) how do I get another original cable that will do my updates with? the second cable I bought was supposed to be for Nokia lumia 900...
Anyway.. thanks.. will try and check when I recharge again and report back.
have a great day
thanks for response

Deactivate 'APPROVE'   button in the ALV in RCATS_APPROVE_ACTIVITIES.

Hi all,
I am trying to deactivate 'APPROVE'   button in the ALV output of the program RCATS_APPROVE_ACTIVITIES.
Any ideas???
Thanx in advance!!!!

Hello Grigoria
The following steps are necessary to implement your requirement:
(1) Create BAdI implementation for BAdI CATS_REPORTING (i.e. class implementing interface IF_EX_CATS_REPORTING => e.g. ZCL_IM_CATS_REPORTING).
(2) Add a public method HANDLE_TOOLBAR (to your BAdI implementing class) as event handler for event TOOLBAR of CL_GUI_ALV_GRID
(3) Set method HANDLE_TOOLBAR as event handler for the CATS displaying grid instance:
METHOD if_ex_cats_reporting~before_display_appr.
SET HANDLER: handle_toolbar FOR im_alv_grid.
ENDMETHOD.
(4) Inactive the APPROVE toolbar button within the event handler method:
METHOD handle_toolbar.
* define local data
DATA: ls_button   TYPE stb_button.
LOOP AT e_object->mt_toolbar INTO ls_button.
    CASE ls_button-function.
      WHEN cl_grid_approval_actexp=>co_ok_approve.
        ls_button-disabled = 'X'.
      WHEN OTHERS.
        CONTINUE.
    ENDCASE.
    MODIFY e_object->mt_toolbar FROM ls_button INDEX syst-tabix.
ENDLOOP.
ENDMETHOD.
Regards
Uwe

Phone Button Shot

My Droid Incredible 2 started having problems yesterday. Fist I noticed that in my text messages, instead of contact names, it only shows numbers. Now I've noticed that when I hot the "phone" button to get the numpad, istead just a little gray "phone" message pops up. Please help, have tried rebooting, removing battery, etc.

some people are facing the same problem. Even the most cursory search of this forum would have gotten you your answer.
Now that your question is answered, did you have a technical support issue?

Is it possible to deactivate a button on the application toolbar?

Hello everybody!
Is it possible to deactivate a button on the application toolbar from standard transaction like PA40?
I'd want to do it using an user-exit.
Thanks in advance.
Cristian

there is a push button on the std tool bar of pf-status 'Function code'.using that u can activate and deactivate teh function codes
or
Check this FM : RS_SET_SELSCREEN_STATUS
sample code :
DATA: BEGIN OF i_exc OCCURS 0,
code LIKE sy-ucomm,
END OF i_exc.
DATA: ws_repid like sy-repid.
CLEAR i_exc.
i_exc-code = 'ONLI'.
APPEND i_exc.
MOVE: sy-repid TO ws_repid .
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = ' '
p_program = ws_repid
TABLES
p_exclude = i_exc.

Changing phone button template on default device profile?

I have a default device profile for 7941 that is currently using a phone button template that is one line. What is the impact of changing that to two-line phone button template? Can this be done live, on the fly?

so if i change the default device profile for my 7941's, nothing will happen to the phones until they are reset?

Deactivate Change Button in PR05

Dear Friends,
In PR05 Travel Expense Manager Screen there is a CHANGE button. I want to deactivate or disable it. I do not mind if it is there but users can not use it.
I have created one new role & assigned only PR05 Transaction code to newly created role. In P_ORIGIN object authorization I have maintained is R.But users are still able to use change functionality.
Please advice How I can deactivate CHANGE button.
Regards
Santosh

Hi Santosh,
If you want to deactivate the Change button in txn PR05.I'm not sure whether it can be de-activated through manipulation of values in the auth. obj or not.But if that is not possible then you can do this by creating a custom t-code with variant of the txn PR05 in SHD0 and remove the change button from there.You will need to seek ABAP'ers help to achieve this as this does not fall into the arena of SAP Security consultant.
You can then assign the custom t-code to the users through your roles..
Thanks,
Saby..

Deactivate Phone

I bought a iPhone 4 off of craigs list to use as a pre-paid phone for a couple of months and it appears the previous owner didn't deactivate the phone before I got it. Is there a way I can deactivate the phone online/over the phone or will I have to go to the Verizon store? I can't activate the phone on a new plan until it is deactivated.

This may be a case of terminology, but you don't activate/deactivate phones like the iPhone. You would only run into this problem if the phone was reported stolen and was then blocked by Verizon, or if it was active on an account with an unpaid balance due. In either of those cases the original owner needs to contact Verizon and either tell them it's NOT lost or stolen, or he has to pay the balance due on the account associated with the iPhone.

Phone buttons lights up

Good morning,
I have a E52 and he lights al day up,the 2 volume buttons on the side of the phone,the 2 selection buttons and the 2 phone buttons(red&green),and the screen is on you see the light on the side of the screen,he is stil black but you can see he is turned on).
The phone is working normal and down everything you ask,but the batteries is empty after 3 day's because the light is always on.
There is no message or missed call,so i don't see what the problem is.
When you push a button the phone gets complete out and after a few minutes the light is there.
I don't now what to do.Is there anybody that can help me with this??
Thanks a lot
Ed

@wupie
Although you would need to backup essential data first, you could always try resetting your E52 to "Out of box" state by keying in *#7370# folowed by 12345 (default Nokia lock code unless altered by user) in case of any software corruption.
Happy to have helped forum with a Support Ratio = 42.5

Deactivate phone buttons in IC_agent

Similar Messages

Maybe you are looking for