Deactivate question "Do you want to save" when closing

Very good in Lion: when switching off the computer all programs close immediately. But Logic: always this stupid question "Do you want to save?". How could I get rid of this question, deactivate it in order to get the program closing immediately.

imho very bad in Lion, that.
I can no longer Save as... in Preview, so I can now only rename my screenshots (what I always did after editing them) via the Finder. Also, this Lion automatic save nonsens makes the Mac take much longer to start up than it did under Snow Leopard.
Also, if I open a Logic project, fool around in it, decide that I don't want to keep any of my foolings, luckily I still get the option to close and NOT save. For that reason it is very good that the user still has a choice of saving or not in Logic.
Afaik you cannot deactivate the "stupid question".

Similar Messages

Forms6i question - Do you want to save the changes you have made !!

Hi,
I'm developing a custom master-detail form for 11i e-Business Suite. The requirement is to programmatically default values for some of the base table items when entering the master record.. Both the master and the detail blocks are base table blocks and defined the relation between these 2 as well..
So i have coded my defaulting logic in the "when-new-record-instance " trigger only when the "(:system.record_status IN ('NEW','INSERT' ) AND :system.mode <> 'ENTER-QUERY')"..
This is working but the problem is even when i do not change any values in the master block and i try to exit out of the form, getting a message "Do you want to save the changes you have made ".. I want to get that message only when some thing else is changed/entered in the master block or when any new detail records has been entered for that master block.
Thanks in advance
Shree

Shree,
It sounds like you have a Post-Query (PQ) trigger that is populating items in your Form. This is the typical reason why you would see this message when you close your form and no User changes have been made. The best solution would be to move your non-base table items from your data blocks to a control block so the PQ trigger won't mark the block or record as "Changed".
Hope this helps.
Craig...

Unnecessary question "Do you want to save the changes..."

Hello again,
I have a multi-record block on which only update is allowed and two buttons: accept and reject. There are three possible ways of changing records:
1. change values in some fields and commit - which works fine;
2. change values in some fields and press accept button;
3. change values in some fields and press reject button.
Buttons have implemented delete, update, insert in some tables using a pl/sql stored package. At the end of the processing, for both buttons, record "accepted" or "rejected" dissapears from the block - using execute_query. Problem is that if some values have been changed before pressing the button, warning window appears: "Do you want to save the changes you have made?" which in this case is unnecessary and annoying. How can i get rid of this message?
Thank you in advance.

If you don't want commit changes on base table items you can use clear_block(NO_VALIDATE) built-in before execute_query

How to override the dialog "Do you want to save" while closing the form?

HI
I have two blocks on the form.Master block is based on a view wheres the detail block is populated by a procedure.
Even if the user doesnot change any record and trying to close the form it is still showing the default "Do you want to save" with three options save,discard,cancel as choices.How can we prevent the form displaying that if the user is closing the form with out any uncommited changes.
Thanks in advance.

Read this thread about the affects of post-query and when-validate triggers:
Message Do you want to change the changes you have made? caused by a lov

When closing the Form "Do you want to save changes" window

Hi
I have a Master-Detail form where in my POST-QUERY trigger i am changing the LOV non-database item field to some value. When I just select Master record(NOT in query mode) my detail records pop up in the detail block. This is done by EXECUTE_QUERY in WHEN-NEW-BLOCK-INSTANCE trigger in Detail Block. But when i close the form it asks me to save changes even though i haven't changed anything. I have this statement in POST-QUERY Trigger
SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD,:SYSTEM.TRIGGER_BLOCK,STATUS,QUERY_STATUS); This issue does not happen in QUERY-MODE.
I tried both Set_Item_Property('BLOCK.CODE',ITEM_IS_VALID,PROPERTY_TRUE); this property in the POST_QUERY and Set_Item_Property('item_name',VALIDATE_FROM_LIST,PROPERTY_TRUE); in QUERY-MASTER-DETAILS trigger but it didn't work.
please help
thanks

Hi!
I think, beause the message "Do you want to save the changes ..." has no error number,
you will not get to catch it on a form level on-message-trigger.
Better find out, why the record status changed.
- Look to a post-query trigger that fills or changes a database item
- change the Validate From List item Property to No
- check for a when-validate-item or post-change trigger on items with a lov that has the Validate From List item Property set to Yes
Regards

Message "Do you want to save changes" to save when user clicks on other tab

Hi,
I have a series of tabs embeded from the main template CustomerTemplate.jspx with <af:commandNavigationItem. I have tabs on BasicData, Accounts etc. I have backing bean (including update button for saving the changes in the same) writtend for BasicData.jspx embeded inside CustomerTemplate.jspx, linkewise other tab.
Now, i am capturing the changes being done in BasicData.jspx in the backing bean. When user shifts to other tab by clicking on the same, i need to popup the message "Do you want to save the changes" Yes/No. If use selects Yes, i need to call Save method from the backing bean else ignore and move to other page.
I have written the code in CustomerTemplage.jspx for bringing BasicData.jspx pages as following
<af:commandNavigationItem text="#{res3['cbuca.menu.basicdata']}"
id="pt_cni2"
immediate="true"
selected="#{attrs.mode=='basicdata'}"
action="basicdata"
destination="/faces/CustomerBasicData.jspx"
rendered="#{security.isUserInRole['basicdata,0']}"
partialSubmit="true"
attributeChangeListener="#{viewScope.backing_TestPage.openCustomDialog}"/>
As per the ADF Documentation, attributeChangeListener will be fired once the attributes is changed (like lose focus) and not through programatically to change the attributes. But, it looks like event is not being fired after several test. I have using JDeveloper 11.1.1.0.2. This requirement will be re-usable for saving the changes to other tabs as well.
If anybody suggest with the help of code to solve the acheive my requirement will be greatly appreciated.
Thanks in advance.
Thanks
-Mahesh

Hi Hasim,
Can you please elaborate like whether this code will be done in the Backing Bean or in the form of javascript.
Can you pl. give a brief on the below one with some more code snipets (if available).
((DCIteratorBinding)this.getBindings.get("VOIterator")).getViewObject().getApplicationModule().getTransaction.isDirty();
Thanks Guys for quick reply and help.
--Mahesh

Disable "Do you want to save changes to *.pdf before closing?" when closing a tif

We upgraded to Office 2007 and decided to stop using the Office 2003 document imaging tool to view TIF TIFF files. This tool wasn't included with Office 2007 so we started using Acrobat 9.1.3 Standard as our default TIF viewer.
Here is the problem. When you close the TIF document you are prompted "Do you want to save changes to 'xxx.pdf' before closing?" Is there a way to disable this prompt? We don't want to convert the files since they are in a read only database.

Nope. Using WORD or Acrobat is forcing a conversion and it not an ideal way to view such files. In addition, you may want to change resolution or such of the graphic before you import it to something such as WORD. Many folks embed graphics that are 3500 dpi and millions of colors and totally bloat the file. They even crop the graphic and reduce the size, wondering why their DOC file is sooooo big. In that sense, there is an advantage to having some of the other tools available. You may have special needs and I do not want to second guess your company needs, so that is my two-cents worth. Sorry that I do not have other ideas, but using an existing graphics package would be the best for your need.

"Do you want to save changes" always poping when closing home made PDF

Hi,
I create a pdf by myself in one of my application (only external lib used is zlib for deflate streams)
I tried to follow the PDF references.
It's a simple PDF file with a few pages, some text & lines to underline (deflated or not same problem), and 3 fonts, a xref.
The PDF is showing perfectly in the Reader X 10.1.1 but when i try to close the window it always asks me :
"Do you want to save changes before closing".
All save options are disabled in the preferences of the reader.
Is there anything to do in the reader to avoid this ?
Is there anything to do in the PDF itself to avoid this ?
Or maybe the PDF is not completly correct ? Which is possible even if i tried to follow the specs in the official reference document, there are alot of chances that i may have done something wrong.

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

The latest version of Firefox no longer asks if you want to save open tabes for your next session..I HATE not having that option. What were they thinking?

Question
The latest version of Firefox no longer asks if you want to save open tabs for your next session..I HATE not having that option. What were they thinking? (I think this is self explanatory)

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Unexpected & Unnecessary Popup "do you want to save changes to 'x' before closing ?"

Hi Im running a code that is opening a pdf doc and reading some stuff from it (not editing it).
avDoc = CreateObject("AcroExch.AVDoc")
avDoc.Open(FileBox.FileName, "x")
accroApp = CreateObject("AcroExch.App")
accroApp.Show()
accroApp.Hide()
accroApp.Exit()
avDoc.Close(0) 'accroApp = Nothing
But when I close it gives this question "ONLY SOMETIMES"
"do you want to save changes to 'x' before closing ?
Previously, i just forced it to save at all times before closing.
I guess there is a way to avoid this, by setting some dirtyflag=false/true?
Pls help
JS

Check out this post - http://forums.adobe.com/message/3871646#3871646
My issue was similar and I finally got it to work.

Show the alert 'Do you want to save the changes? after entering each record

Hi,
Is there a way to show the alert 'Do you want to save the changes you have made?', after entering each record.
i.e. as soon as a record is entered, user should be prompted to 'Do you want to save the changes?' the record when they move to the next record.
I used the below code in Post-Record rigger. Prompt was diplaying fine as per the requirement,but record was not being saved.
DECLARE
n_button_selection INTEGER;
BEGIN
if :System.Record_Status='INSERT' then
fnd_message.set_string('Do you want to save the changes?');
n_button_selection := fnd_message.question('Yes', 'No','Cancel', 1, 2,'question');
IF n_button_selection = 1 THEN
forms_ddl('commit_FORM');
ELSIF n_button_selection = 2 THEN
RAISE form_trigger_failure;
ELSE
NULL;
END IF;
end if;
END;
I used forms_ddl('commit_FORM') to commit the record. Because we can't us Do-key('commit_form') in post-record trigger. But forms_ddl('commit_FORM') is not working. So can anybody please give some idea regarding this.
--

Forms_ddl issues dynamic sql - you cannot call another builtin (like commit_form) within forms_ddl. Check form_status after the call and you will see that it failed.
Moreover, forms is not able to execute the post and commit process if you issue "forms_ddl('commit');", so this will not be a solution either.
You could use the When-New-Record-Instance - Trigger, which allows restricted built-ins to be executed, and issue do_key('commit_form');". However, you would have to check the :system.block_status or :system.form_status, because :system.record_status will already hold the new record number.
Regards,
Gerd

Do you want to save changes button code

Hi guys,
Quick question which I was wondering if anyone could help me out. When a form has changed and you press the x button you get the message do you want to save changes? with a yes or no option. Is it possible to put code in to trigger of these yes/no buttons when clicked and if so how would I go about doing this?
Thanks.

hello
if i got your need so you will need to create alert
then start coding
examlpe
1- create alert called save_record
2- in key exit trigger write this code
DECLARE
al_id Alert;
al_button NUMBER;
BEGIN
al_id := Find_Alert('save1');
IF Id_Null(al_id) THEN
Message('User_Warning alert does not exist');
RAISE Form_Trigger_Failure;
ELSE
/* ** Show the warning alert */
al_button := Show_Alert(al_id);
** If user pressed OK (button 1) then bring up another
** alert to confirm -- button mappings are specified
** in the alert design */
IF al_button = ALERT_BUTTON1 THEN
al_id := Find_Alert('Are_You_Sure');
IF Id_Null(al_id) THEN
Message('The alert named: Are you sure? does not exist'); Message('The alert named: Are you sure? does not exist');
commit;
exit form;
RAISE Form_Trigger_Failure;
ELSE
al_button := Show_Alert(al_id);
IF al_button = ALERT_BUTTON2 THEN
null;
END IF;
END IF;
END IF;
END IF;
END;
Edited by: Khaled Farouk on 27-May-2013 07:09

How to enforce the message "Do you want to save changes?"

Hello,
How to enforce the message "Do you want to save changes?" when the user attempts to close a form after checking a non-database item (check-box).
All the other database items in the block are not updateable and only viewable.
After checking the non database item check-box, if the user tries to commit, then the system is saving the changes and call the appropriate procedure on save.
But if the user tries to close the window without committing, the form is not showing the message "Do you want to save changes?" since the check-box is a non database item.
How to enforce the message "Do you want to save changes?" in this scenario when the user tries to close the window?
Thanks in advance.
Cheers
Sri

This is a fairly common question in the forum. You will need to override the default exit form process and check to see if the checkbox is checked. You can do this in the Key-Exit trigger. For Example:
DECLARE
al_id     ALERT;
al_button NUMBER;
BEGIN
IF ( CHECKBOX_CHECKED('YOUR_BLOCK.CHECKBOX_ITEM') ) THEN
     /* Display an Alert here that asks, "Do you want to save changes?" */
     ...code here to set the properties of your alert...
     al_button := Show_Alert(al_id);
     IF ( al_button = ALERT_BUTTON1 ) THEN
        --YES
        /* Perform COMMIT Processing here...*/
     ELSIF ( al_button = ALERT_BUTTON2 ) THEN
        --No
        Exit_Form(NO_VALIDATE);
     ELSE
        --Cancel
        RAISE Form_Trigger_Failure;
     END IF;
ELSE
     Exit_Form;
END IF;
END;If you need more help with the Alert, please check out the SHOW_ALERT topic in the Forms Help.
BTW, what happens if all the user does is check the checkbox? No other changes have occured. What changes are you trying to process?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Adding "do you want to save change you have made" message.

We developed and multy screen web applicaton using J dev 11.1.1.1 and ADF BC- ADF RC
We want when a user go to other screen to ask him a question as "do you want to save change you have made"
Otherwise if a an error occurs "source" screeen
and user go "target" screen and want to commit change
ADF try to validate all entities.
And error mesages about source screens displaying on the target screen.
it is very confusing situation fro users.
Thanks.

Thasnks alot.
We implement http://kuba.zilp.pl/?id=681 method.
but isCommitEnabled() method return FALSE every time.
Do we need to do anything in app module side.
protected Boolean isCommitEnabled(){
return getApplicationModule().getTransaction().isDirty() ? Boolean.TRUE : Boolean.FALSE;
we will try pedja's recommendation also...

How to avoid the message "Do you want to save the changes you have made?"

i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?

hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A

Deactivate question "Do you want to save" when closing

Similar Messages

Maybe you are looking for