Deactivated X Pro 10 on PC 1; Now Serial Not Accepted on PC 2

I Deactivtated the serial permanently from the original PC.  I am not trying to use on our new PC and it still will not accept the serial number.  Please help.  Thanks.

It appears that you have an upgrade version of Acrobat 10 Professional.  It is asking for the serial number for the software which you upgraded from.  Did you have an older version of Acrobat prior to Acrobat 10 Professional?  If so then you would want to enter it's serial number.
If you have your older version registered then you can find your serial number online by following the directions listed at http://forums.adobe.com/message/3987968#3987968?promoid=KBHJW.

Similar Messages

  • My MacBook pro did a firmware update now will not accept my password

    My Skype account was hacked so I changed the password for my computer too I did a firmware update the computer started up and went to a black screen asking for my password it does not accept the new or old passwords. I have tried resetting the password with the snow leopard install disc but it will not recognise it and ejects. Please help

    Try image capture (in your applications folder) - or the finder - if neither of these see the card uyou need to try a USB card reader - once you get yoru photos off use the camera format command to erase and reformat the card
    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    LN

  • My computer just shut itself down and upon restarting it now will not accept my password to log into my computer desktop

    My computer just shut itself down and upon restarting
    it now will not accept my password to log into my computer desktop
    How can I reset my password!!

    This Apple article has some possible solutions.
    Best of luck.

  • Xp to win 7, acrobat 9 pro serial # not accepted

    ugraded from xp to win 7 and acrobat 9 pro serial number not accepted I can find no info online to help.

    Hi old men rock,
    Please see this document: Error "Invalid serial number" | Acrobat 9 | CS4
    If that doesn't do the trick, let us know, and we will take it from there.
    Best,
    Sara

  • While on Macbook Pro went to line bars now will not shut down and the only thing on the screen is the line bars. Help

    While on mac the screen went to line bars and now that is all that you can see. It will not shut down. Pulled battery ans left it out for 3 hours. put it back in and it is still on the line bars.

    http://support.apple.com/kb/HT1808

  • Logic X Pro Failed to install and now is not working

    I was in the middle of installing Logic X Pro I will show you the creen in a screen shot below. This screen had been about 90% through installiation the first time I had tried to install and then the power went out in my house and the computer restarted unexpectedly. When the computer turned back on I tried to redo the installiation and ever since I have tried it has not moved from 0% no matter how long I let it sit. i have resion to believe it is most likely because the program is probibly half installed and is causing major issues while trying to install it again on top of the fact that all most of the files already exist within the hard drive. Is there any way to go into my registery and delete all the files or rest it and delete it entirely? I just want to be able to install it! thanks in advance
    This is what it will say for as long as  i let the app sit ... it has not moved since the first attempt at install when the power went out! thank you in advance
    Sincerely,
    Frank

    Never mind for some reason when I went into Logic the next time I had to actually delete all the files off the computer and then reboot. I waited a few hours and then I turned it back on and randomly the next time I tried it worked. Thanks

  • My iMac 2006 had a crashed Lion and now does not accept any Lion installation.

    Hi
    I have tried to install my Lion from an external drive. This drive has basic Lion on it and runs great with my iMac.
    However installing the Lion on my iMac fails constantly. I have reviewed the installation protocol and can not find a clue. It seems as if the drive was wrong but the disc checker does not find a clue when it is empty. I did several partition processes and deleted it with various methods. However a volume of 310 MB was always left, although hidden to me.
    When I checked the protocol some errors occur. I can not judge, which critical at all. However this ReportCrash could be a hint.
    Oct 11 04:58:02 localhost ReportCrash[2392]: Process:         update_automator_cache [2391]
    Oct 11 04:58:02 localhost ReportCrash[2392]: Path:            /Volumes/VOLUME/*/Automator.framework/Versions/A/Support/update_automator_cache
    Oct 11 04:58:02 localhost ReportCrash[2392]: Identifier:      update_automator_cache
    Oct 11 04:58:02 localhost ReportCrash[2392]: Version:         ??? (???)
    Oct 11 04:58:02 localhost ReportCrash[2392]: Code Type:       X86-64 (Native)
    Oct 11 04:58:02 localhost ReportCrash[2392]: Parent Process:  sh [2390]
    Oct 11 04:58:02 localhost ReportCrash[2392]:
    Oct 11 04:58:02 localhost ReportCrash[2392]: Date/Time:       2013-10-11 04:57:58.123 -0700
    Oct 11 04:58:02 localhost ReportCrash[2392]: OS Version:      Mac OS X 10.7.5 (11G63)
    Oct 11 04:58:02 localhost ReportCrash[2392]: Report Version:  9
    Oct 11 04:58:02 localhost ReportCrash[2392]:
    Oct 11 04:58:02 localhost ReportCrash[2392]: Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Oct 11 04:58:02 localhost ReportCrash[2392]:
    Oct 11 04:58:02 localhost ReportCrash[2392]: Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Oct 11 04:58:02 localhost ReportCrash[2392]: Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Oct 11 04:58:02 localhost ReportCrash[2392]:
    Oct 11 04:58:02 localhost ReportCrash[2392]: VM Regions Near 0:
    Oct 11 04:58:02 localhost ReportCrash[2392]: -->
    Oct 11 04:58:02 localhost ReportCrash[2392]:     __TEXT                 000000010e546000-000000010e549000 [   12K] r-x/rwx SM=COW  /Volumes/VOLUME/*/Automator.framework/Versions/A/Support/update_automator_cache [/System/Library/Frameworks/Automator.framework/Versions/A/Support/update_autom ator_cache]
    Oct 11 04:58:02 localhost ReportCrash[2392]:
    Oct 11 04:58:02 localhost ReportCrash[2392]: Application Specific Information:
    Oct 11 04:58:02 localhost ReportCrash[2392]: objc[2391]: garbage collection is ON
    Oct 11 04:58:02 localhost ReportCrash[2392]:
    Oct 11 04:58:02 localhost ReportCrash[2392]: Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    The installation finally stopped progressing, so that canceld the programm by cmd+Q.
    Last entry in the protocol is:
    Oct 11 05:29:02 localhost Unknown[328]: 2013-10-11 05:29:02.968 Mac OS X Installer[346:b403] File creation failed /Library/Logs/DiagnosticReports/Installer_2013-10-11-052902_localhost.diag - uid: 0 gid: 0, euid: 0 egid: 0 - error 30: Read-only file system
    I hope to add the complete protocol for your review.
    Regards
    Tom

    Hi
    The problem was a hard drive with a bad storage area.
    I replaced the hard drive with an external drive and boot the OS X from there.
    Now all is good.
    That was solved a year ago.
    Thanks for being patient.
    Tom

  • In ddition to printing freeszing, now will not accept anything from the keyboard.

    Earlier versions of Firefox have lost the ability to allow printing of the UPS website lables and the international labels of the USPS website.
    As of this last "upgrade" Firefox has now lost the ability to have an active keyboard when on the UPS website.
    In other words, Firefox has become an unacceptable browser for shipping.

    Davesmom, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • For some godforsaken reason, Apple refuses only now to not accept my credit card information. Could use some help.

    I have been a proud iPhone 4S user for a year this coming August. I also have been using the same credit card on it this entire time. It has had some minor complications because of my infatuation with the power of music and photo editing, but those were easy fixes with just a simple addition to my balance.
    Now, its been FOUR days since I could buy ANYTHING on ANY app. I already called my card company and even THEY had no earthly clue why my perfectly functioning card, with money on it, won't work. They even reset my card just as a try and STILL my problem persists.
    I have been scrolling through support for about an hour trying to see if it's just a store problem, but no one else is having the same problem.
    So. Is anyone up to the challenge?
                        Sincerely,
                             The Frustrated Female

    Go to https://expresslane.apple.com
    Choose 'iTunes', then 'iTunes Store'.
    A new page will open.
    Choose 'Purchases, Billing & Redemption', then the most appropriate sub-category, usually 'Apple ID account billing'.

  • T61-T8300w​ill not stop asking me to reboot, now will not accept any other updates

    I purchased the T61 about 2 weeks ago, I immediately allowed it to update my system in productivity center.
    I chose all the updates at once and let them run.
    Immediately after the updates were done and now, every time thereafter that I boot up it brings up a message: "restarting computer is required: The computer must be restarted before updating can continue: yes/no"
    I have restarted it over 50 times and the message will not go away.
    I see in productivity center that one update failed to install fully: ThinkVantage rescue and recovery update (4.10.0314.00)
    I removed it ( I think) and Add/remove programs, still happens.
    System update advised I reinstall it, I did, still happens.
    I looked for a system restore point that was earlier than this faulty installation; there was none earlier.
    I have requested an update to my system in productivity center and it does not solve it.
    I did a reinstall/repair of windows. It did not fix it.
    Now windows update is unable to install any updates, The yellow shield advises me windows updates are installing, but they are all failing to install.
    I cannot upgrade to Microsoft Internet Explorer 7.0.
    I really like the laptop, but I am getting frustrated with this problem
    help!

    Hello,
    1. i would do a complete system restore, then update your OS through Windows Update.
    2. Setting Restore Point
    3.Update your Thinkpad Software. Please Note: Some updates requires a specific order to install. Like Hotkey- Wlan- AccessConnectios- Powermanager!!! Notice the install notes in your System Updater!!
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • MS Project Pro file on Project Server 2010 does not accept [No Group] selection when clicking on Group view

    MS Project Server 2010 gives me the following error when I try to click on the [No Group] group:
    Error message:
    The group "" cannot be found. You tried to display a view that references a group that is not available.
    Specify a different group for the view."
    Note: When I look at the drop downlist for the Group on the View Ribbon, [No Group] appears in the Built-in section of the list. It also appears on the Organizer.

    Michael W --
    I have seen this error message several times when the project got corrupted due to drops in my network connection while the enterprise project was open.  If memory serves me correctly, the method for resolving this problem is to use the Save For
    Sharing feature.  To do this, complete the following steps:
    Add the Save for Sharing button to your Quick Access Toolbar, if you have not already done so previously.  Use the Project Options dialog for this.
    Open the project in question and click the Save for Sharing button.
    In the Save for Sharing dialog, save the MPP file in a location where you can find it easily, such as your Desktop.
    Close the MPP file and then reopen it.
    Click File > Save As and then click the Save button.
    Using this process, Microsoft Project will resolve the corruption in your project.  Please let us know if this process works for you.
    Dale A. Howard [MVP]

  • I have iCloud running on my iPad. But when trying to get my macbook pro on iCloud, my Apple ID is not accepted.  What am I doing wrong?

    Can you help?

    I know it is not the best advice, but the easiest way would be to delete your app from your device and then to re-download it from the App Store again by using your new Apple ID.

  • I have a macbook pro in front of me that will not accept its new os, I have a macbook pro in front of me that will not accept its new os

    I folks please help we have a grey screen issue here it will not allow me to re install the OS it does not appear to allow itself to get back on line to verify itself it's little legs are up in the air, just begging for the crusher!

    What model MBP do you have? What OS are you trying to install? And, from where?

  • After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a messag

    After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

    Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
    We need it to be acceptable to all devices.
    Thank you!

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/iphone.html

Maybe you are looking for

  • I need help on iPhoto to print more than one picture at a time

    I would like to know how to print 4 pictures on an 81/2x11 sheet of paper?

  • Is there a way to play something on the TV while looking at something else on your computer?

    Ya so Im one of those weirdoes who has to have music or a movie playing while doing stuff. Think its the ADD. Anyways, would there be a way to say, have a Safari Tab for netflix, have that netflix playing a movie, with the pro hooked up to the TV of

  • Model View Control

    Hi.. i need some help when designing the view part of my application. My main problem is that sometimes i do not know how to separate the control code from the one needed in the view part.For example, if I have some componentes(implementes mouse moti

  • Safari keeps crashing after latest Security patch

    Since I installed the latest Security patch Safari keeps crashing, as often as every 15 minutes... I suspect that it has something to do with the latest Flash-player. Is there a way around this or do I have to wait for the next patch from Apple (or A

  • The New FIOS Media manager

    Ever since I downloaded and installed this new version with video capabilities, I've noticed one disturbing thing. Since the new media maznager and re-scanned my media player albums, it has re-arrange3d them in its own listings in alphabetical order!