Deactivating Elements 11 re:again!!

I have tried to deactivate my elements 11 from program files and by opening it but cannot access editor, now what. I have uninstalled and installed but it will not allow me to access the editor to get to the deactivation. Arrg!

If you have had a computer crash you need to contact support directly for activation/deactivation and other installation issues. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away.
To get help now click here for product support

Similar Messages

  • Deactivating Elements on an old hard disk

    I had Elements 8 installed both on my Desktop and Laptop computers, but then bought Elements 9 and installed that on the Desktop - but didn't know about deactivating Elements 8 until I bought a third (Netbook) computer and wanted to install Elements 8 on this.  (I want to use Elements 8 on both the Laptop and Netbook computers because Elements 9 takes up too much disk space).
    Unfortunately before I could deactivate Elements 8 on the Desktop its hard dsk failed (and I no longer have it).  Is there any way in which I can get that deactivation made?
    Anthony.

    You will need to contact Adobe support. They will do the deactivation thing for you. Please visit : http://forums.adobe.com/message/5004350#5004350
    Thanks
    Andaleeb

  • Deactivating Elements for transfer

    I currently use Elements 8.  When I get a new computer this week I want to upgrade to Elements 10. What's the easiest way to do this? Shall I deactivate it on the old computer and then install and upgrade on the new one? (Note: I downloaded this product at purchase. I do not have a disc, but I do have the serial number.) Also, a reactivation link would be appreciated!

    You do not need to have the old one installed on your computer before installing the new software, just the serial number. It can never hurt to deactivate the your old software.
    If you purchase the upgrade from the Adobe store it is always a good idea to back it up to external media in case you need access to the software again. At the moment, Adobe does offer you the capability to re-download Adobe store downloads, but you never know when this and any other policy could change. Beside you could need to re-install when Adobe servers are down. You can never go wrong having a backup.

  • Can't install non-Deactivated Elements

    I work for a nonprofit that recently purchased a license of Premiere Elements.  I installed it on my work laptop and my personal laptop since I work from home a lot.  Recently, we moved offices and got new laptops.  I uninstalled Premiere both from my old work laptop and my personal laptop WITHOUT deactivating them first.  Whoops.  Now I can't install a copy on my new work laptop.
    So the central issue is how do I install Premiere Pro on something when I previously uninstalled but didn't deactivate it? 

    People in this user to user forum won't be able to help with licensing issues... you need to call Adobe and have the deactivation done from their end
    http://www.adobe.com/support/contact
    In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7

  • Help with deactivating elements 11

    Hello there, I am trying to deactivate elements 11.  When I go to HELP< DEACTIVATE nothing happens?  Any suggestions? thanks

    Hello there, just to let you know, I still cant get it to deactivate but I have been on to adobe and they have sorted my serial number out so that I can use it on my new machine

  • Deactivating Elements 11

    How can you deactivate elements 11 if you cannot access the editor?

    What about if you run the editor program directly, rather than from the Welcome screen? In PSE11 (Windows version) it would be "C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe".
    If that doesn't work try uninstalling and then reinstalling to see if that will let you in.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Xp and elements 12 crashes again?

    is there a checklist of sorts adobe makes for its software (elements 12 video)? I began doing video years ago with the adobe standard video collection 1.5. after a system restore it would no longer allow a reinstall? couldnt find answer anywhere online. bit the bullet and gave up. decided to try out the premier elements 12! it takes forever to load software, and crashes anywhere from 1-5 minutes once I begin using. Im not even rendering, just navagating the site.
    what are some general things I should be looking for to solve this problem? will it even run on xp? I have a dell 370 workstation, decent harddrive, memory and processor.
    also- I have premier elements 2 installed from years ago- should I remove it? its the only adobe video software thats working!

    Carbonpictures does your computer meet or exceed the system requirements listed at http://www.adobe.com/products/premiere-elements/tech-specs.html.  Did you receive any error messages during the installation process?
    I would recommend reviewing your installation logs to ensure that you had a successful installation.  Please see Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html for information on where to locate and interpret the installation log files.  Please feel free to post any specific error messages you discover to this discussion.

  • How do I get Photoshop elements to open again?

    It used to wok.  Now it won't open.   Is there a space requirement for it to open?  I deleted items and it still woill not open.   Photoshop CS5 is working fine.
    Message was edited by: pwach509

    What doesn't open--the welcome screen, the editor, the organizer? How are you opening it? Which version of PSE and which operating system?

  • Deactivating Photoshop Elements 4.0

    I read the posts about deactivating Elements 8.0 but they do not seem to apply to Elements 4.0. which came bundled with an Epson scanner.  How do I deactivate 4.0?  Edit does not show a deactivate option.  Thanks.

    Once again, you can't deactivate it because it never had activation in the first place. No need to deactivate it. Back then adobe was still on the honor system.

  • Using Elements 12 for a year and had to uninstall and reinstall it on same computer. Going to Editor I got message to sign in and register [again] but could not do this as I got message that I was offline or the computer clock was wrong but that was all O

    Using Elements 12 for a year and had to uninstall and reinstall on same computer. Going to  the Editor I got a message that I had to sign in and register the product (again) but I got a message that the computer was offline or the clock was wrong, there was nothing wrong with either of these.  How do I get my Elements 12 working again?  

    Hi,
    Please follow the steps mentioned in  Sign in, activation, or connection errors | CS5.5 and later and check if this helps.
    Do let me know if you need any other assistance.
    Thanks,
    Swapnil

  • Reinstalling Elements without CD

    I migrated Elements from my old Mac to my new Air, deactivated it on the old machine, but still got a message telling me to uninstall then reinstall it on the new one. I uninstalled it but do not any longer have the software CD so I reinstalled it from my Time Machiine backup and got the same message. I still have the old machine. Can I migrate Elements from there again, even though it has been deactivated, and get a clean install?

    Did you purchased Photoshop Elements 10 or Premiere Elements 10?
    You can get it from the below link.
    http://www.adobe.com/products/catalog.html

  • Using iPhoto 11 with Photoshop Elements 10

    I have just successfully purchased & loaded Elements 10 to enhance my editing/organising facility. However, when I right click on a selected photo in iPhoto and select ''Use external editor" - although it immediately loads the Elements editing workspace, it doesn't load the photo.
    I've tried changing the default editing in iPhoto preferences (Advanced) to Elements 10, but again when I select Edit on the iPhoto home page, it opens up the Elements editing workspace - but not the photo!
    What am I doing wrong here?
    I could always drag & drop from iPhoto to Elements 10 - but I shouldn't have to do that should I ?

    In the iPhoto Preferences set to Edit Photos in iPhoto.
    Then if you want to use your external editor you can right click on the image and select 'Edit in External Editor'...
    Best of both worlds.
    Regards
    TD

  • Installing Adobe Photoshop Elements Causes My Computer to Cut Out on Booting UP!

    I have installed Adobe Photoshop Elements 10 on my new computer running windows 7 64 bit. I did not appreciate the problems. The first time that I installed it the computer shut down as soon as it was loaded and from then onwards it shut down within seconds of the computer booting up into windows. I used system restore to take the computer back to before Elements 10 was installed. The computer kept on switching off after windows had booted up. Took it into the technician who thought the PSU was at fault and he put in a new unit. The computer then worked fine until I installed Elements 10 and again the computer switches off as soon as windows as booted up. I have again used system restore to take the computer back to before Elements 10 was installed, still it switches off shortly after booting into windows. What can I do to get things to work properly?  I have a brand new computer that I am unable to use as a result of installing Elements 10. I am typing this on my old computer running Vista 34 bit with Elements 10 installed and all working well. Any help or advice would be appreciated.

    I have had a similar experience - Elements organizer crashed and even when not running, my computer froze after a few minutes.  My PC had never crashed before this installation.
    I found a solution though...
    After a little sleuthing using task manager, I found that all the memory in my system (4GB) gets suddenly hogged (within seconds) by the "Elements Organizer" process (3GB) ... I found the service correspponding to this process, "Adobe Active File Monitor v10", stopped it and set autostart to manual.  My PC no longer crashes.
    I think Adobe needs to look into this one - it has all the hallmarks of a nasty memory leak. 
    A couple of possible clues as to why certain systems don't take well to this service:
    - I have a few very large video clips (2hours+) on my PC
    - I installed trial products like light room, CS5 before settling on Photoshop+Premiere Elements - could leftovers after uninstalling cause conflicts?
    - I have other video editors on my system that I don't use, like Corel VideoStudio and Sony Vegas.
    Thoughts?

  • HT1420 Hi I am trying to sync my pone but wont allow me to transfer music purchased on the phone. States I have 5 authorised computers on my account but when i  logg into my account it only identifies 1 so i carn't deactive?  trying to backup data to put

    Hi I am trying to sync my ip3 but wont allow me to transfer music purchased on the phone to itunes on the laptop. States I have 5 authorised computers on my account but when i  logg into my itunes account it only identifies 1 so i carn't deactive all to start again? I am trying to backup data fom myip3 to put on ip4 so carnt even complete sync atm Any ideas on what to do??

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. 
    If your sister doesn't know the password for her old ID, and if her old ID is an earlier version of her current ID, she needs to temporarily recreate the old ID so you can delete if from your phone using her current password.  To do this, have her go to https://appleid.apple.com, click Manage my Apple ID and sign in with her current iCloud ID.  Click edit next to the primary email account, change it back to her old email address and save the change.  Then edit the name of the account to change it back to her old email address.  You can now use the password for her current ID to turn off Find My iDevice on your device, even though it prompts you for the password for her old account ID.  After you do this, Next, have your sister recreate her current ID again by going back to https://appleid.apple.com and changing her primary email address and iCloud ID name back to the way it was.
    Then your can save any photo stream photos that you wish to keep to the camera roll on your device, then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted.  You will be prompted to either keep or delete the iCloud data from your device.  If the data is already in another account you can choose Delete.  If you need to migrate it to another account, choose Keep, then choose Merge when signing into the new account.

  • Adding new element to BPEL for use in PL SQL type, has binding errors

    Figured I might as well post this here since I haven't gotten a single reply in 3 days anywhere else :/
    I have a BPEL service that calls a PL SQL procedure. I have added a new element to the BPEL called quote_cart_line.
    All I had to the BPEL to accomplish this was edit 3 files -
    Async_Invoke_Import_Model.xsd (Source)
    <element name="orig_sys_line_ref" type="integer" minOccurs="1" nillable="true"/>
           <element name="quote_cart_line" minOccurs="1" nillable="true" type="integer"/>
          </sequence>
    .....APPS_NI_MODEL_IMPORT_UTIL_IMPORT_SELECTIONS.xsd (Target)
    <element name="ORIG_SYS_LINE_REF" type="decimal" db:type="NUMBER" minOccurs="0" nillable="true"/>
             <element name="QUOTE_CART_LINE" type="decimal" db:type="NUMBER" minOccurs="0" nillable="true"/>
          </sequence>
    .....Transform_NIE_Inputs.xsl (Transforming from Source to Target)
    <ns1:orig_sys_line_ref>
              <xsl:value-of select="/ns1:Async_Invoke_Import_ModelProcessRequest/ns1:import_line/ns1:orig_sys_line_ref"/>
            </ns1:orig_sys_line_ref>
            <ns1:quote_cart_line>
              <xsl:value-of select="/ns1:Async_Invoke_Import_ModelProcessRequest/ns1:import_line/ns1:quote_cart_line"/>
            </ns1:quote_cart_line>
          </ns1:import_line>
    .....I have done this to two other BPELs and they work fine. (1st BPEL calls the second BPEL passing this new element, which then passes it to this BPEL I am having trouble with, which then should be binding it to a PL SQL type)
    So this BPEL calls a PL SQL procedure, binding the elements from the BPEL to a PL SQL type (ni_model_import_line). So I edited the PL SQL type to accept this new parameter:
    orig_sys_header_ref       NUMBER,
           quote_cart_line           NUMBER,
           CONSTRUCTOR FUNCTION ni_model_import_line(p_part_number                IN VARCHAR2,
    MEMBER PROCEDURE add_orig_sys_header_ref(p_org_sys_header_ref          IN NUMBER),
           MEMBER PROCEDURE add_quote_cart_line(p_quote_cart_line                 IN NUMBER)
    MEMBER PROCEDURE add_quote_cart_line(p_quote_cart_line                 IN NUMBER) IS
    BEGIN
       quote_cart_line := p_quote_cart_line;
    END add_quote_cart_line;
    END;
    .....I invoke all of this, and the new element gets populated in 3 different BPELs, including this one I explained here. But when it comes time to call the PL SQL I am now getting an error:
    <fault>
    -<bpelFault>
    <faultType>0</faultType>
    -<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="summary">
    <summary>
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'nie_import_2' failed due to: Interaction processing error.
    Error while processing the execution of the APPS.NI_MODEL_IMPORT_UTIL.IMPORT_SELECTIONS API interaction.
    An error occurred while processing the interaction for invoking the APPS.NI_MODEL_IMPORT_UTIL.IMPORT_SELECTIONS API. Cause: java.lang.NullPointerException
    The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution.
    </summary>
    </part>
    -<part name="detail">
    <detail>null</detail>
    </part>
    -<part name="code">
    <code>null</code>
    </part>
    </bindingFault>
    </bpelFault>
    </fault>This doesnt happen if I remove the references to this new element and try again, so it obviously is a problem with the element, but I have no idea what it is. It works fine when going from BPEL to BPEL, but as soon as the process tries to call the PL SQL procedure this happens. It is even more frustrating because I have done this exactly before adding another element, and it worked fine...
    Any ideas or tips please?

    Figured I might as well post this here since I haven't gotten a single reply in 3 days anywhere else :/
    I have a BPEL service that calls a PL SQL procedure. I have added a new element to the BPEL called quote_cart_line.
    All I had to the BPEL to accomplish this was edit 3 files -
    Async_Invoke_Import_Model.xsd (Source)
    <element name="orig_sys_line_ref" type="integer" minOccurs="1" nillable="true"/>
           <element name="quote_cart_line" minOccurs="1" nillable="true" type="integer"/>
          </sequence>
    .....APPS_NI_MODEL_IMPORT_UTIL_IMPORT_SELECTIONS.xsd (Target)
    <element name="ORIG_SYS_LINE_REF" type="decimal" db:type="NUMBER" minOccurs="0" nillable="true"/>
             <element name="QUOTE_CART_LINE" type="decimal" db:type="NUMBER" minOccurs="0" nillable="true"/>
          </sequence>
    .....Transform_NIE_Inputs.xsl (Transforming from Source to Target)
    <ns1:orig_sys_line_ref>
              <xsl:value-of select="/ns1:Async_Invoke_Import_ModelProcessRequest/ns1:import_line/ns1:orig_sys_line_ref"/>
            </ns1:orig_sys_line_ref>
            <ns1:quote_cart_line>
              <xsl:value-of select="/ns1:Async_Invoke_Import_ModelProcessRequest/ns1:import_line/ns1:quote_cart_line"/>
            </ns1:quote_cart_line>
          </ns1:import_line>
    .....I have done this to two other BPELs and they work fine. (1st BPEL calls the second BPEL passing this new element, which then passes it to this BPEL I am having trouble with, which then should be binding it to a PL SQL type)
    So this BPEL calls a PL SQL procedure, binding the elements from the BPEL to a PL SQL type (ni_model_import_line). So I edited the PL SQL type to accept this new parameter:
    orig_sys_header_ref       NUMBER,
           quote_cart_line           NUMBER,
           CONSTRUCTOR FUNCTION ni_model_import_line(p_part_number                IN VARCHAR2,
    MEMBER PROCEDURE add_orig_sys_header_ref(p_org_sys_header_ref          IN NUMBER),
           MEMBER PROCEDURE add_quote_cart_line(p_quote_cart_line                 IN NUMBER)
    MEMBER PROCEDURE add_quote_cart_line(p_quote_cart_line                 IN NUMBER) IS
    BEGIN
       quote_cart_line := p_quote_cart_line;
    END add_quote_cart_line;
    END;
    .....I invoke all of this, and the new element gets populated in 3 different BPELs, including this one I explained here. But when it comes time to call the PL SQL I am now getting an error:
    <fault>
    -<bpelFault>
    <faultType>0</faultType>
    -<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="summary">
    <summary>
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'nie_import_2' failed due to: Interaction processing error.
    Error while processing the execution of the APPS.NI_MODEL_IMPORT_UTIL.IMPORT_SELECTIONS API interaction.
    An error occurred while processing the interaction for invoking the APPS.NI_MODEL_IMPORT_UTIL.IMPORT_SELECTIONS API. Cause: java.lang.NullPointerException
    The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution.
    </summary>
    </part>
    -<part name="detail">
    <detail>null</detail>
    </part>
    -<part name="code">
    <code>null</code>
    </part>
    </bindingFault>
    </bpelFault>
    </fault>This doesnt happen if I remove the references to this new element and try again, so it obviously is a problem with the element, but I have no idea what it is. It works fine when going from BPEL to BPEL, but as soon as the process tries to call the PL SQL procedure this happens. It is even more frustrating because I have done this exactly before adding another element, and it worked fine...
    Any ideas or tips please?

Maybe you are looking for