Deactivating Elements for transfer

I currently use Elements 8. When I get a new computer this week I want to upgrade to Elements 10. What's the easiest way to do this? Shall I deactivate it on the old computer and then install and upgrade on the new one? (Note: I downloaded this product at purchase. I do not have a disc, but I do have the serial number.) Also, a reactivation link would be appreciated!

You do not need to have the old one installed on your computer before installing the new software, just the serial number. It can never hurt to deactivate the your old software.
If you purchase the upgrade from the Adobe store it is always a good idea to back it up to external media in case you need access to the software again. At the moment, Adobe does offer you the capability to re-download Adobe store downloads, but you never know when this and any other policy could change. Beside you could need to re-install when Adobe servers are down. You can never go wrong having a backup.

Similar Messages

Hi, I have bought Photoshop and Premiere Elements for windows, but I now have a iMac and would like to deactivate on the PC and transfer the programs to the iMac. Is that possible even do I bought it for Windows?

Hi, I have bought Photoshop and Premiere Elements for windows, but I now have a iMac and would like to deactivate on the PC and transfer the programs to the iMac. Is that possible even do I bought it for Windows?

Normally an Elements purchase is good for both platforms. You should only need to download and install the Mac versions of the programs and install and activate them using the serial number you have from the opriginal purchase.

I have a lot of videos processed using elements 2. I have bought a MAC. If I buy the newest version of elements for my new mac, will i be able to easily transfer the videos to the newest version i.e. will the new software automatically integrate the wor

I have a lot of videos processed using elements 2. I have bought a MAC. If I buy the newest version of elements for my new mac, will i be able to easily transfer the videos to the newest version i.e. will the new software automatically integrate the work done on those videos. What is my best option to transfer those videos to my new mac. Thanks

phyli2
What is your "Elements 2" - Photoshop Elements 2 or Premiere Elements 2? For now I will assume Premiere Elements 2 which had to be on some version of Windows.
What do you have from Premiere Elements 2 - project files (.prel) or exports to file formats such as .avi or .mpg or .mov?
Project files from Premiere Elements (any version) Windows cannot be used in Premiere Elements (any version) Mac.
Video files exported from Premiere Elements 2 with its QuickTime choice (.mov files) would be likely to open in Premiere Elements 13 Mac. The other Premiere Elements
2 choices of MPEG and Windows Media would be expected to need conversion to .mov or .mp4 before import into Premiere Elements 13.
In Premiere Elements 13 Mac, consider importing the files from wherever you save files in Mac to a project with the project's Expert workspace Add Media/Files and Folders/Project Assets. I would strongly encourage you to set the project preset manually (File Menu/New/Project) to match the properties of these source files before import rather than let the project do it manually for you based on the properties of the first video dragged to the Timeline.
Please supply more details so that we can fine tune the reply. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Deactivating Elements on an old hard disk

I had Elements 8 installed both on my Desktop and Laptop computers, but then bought Elements 9 and installed that on the Desktop - but didn't know about deactivating Elements 8 until I bought a third (Netbook) computer and wanted to install Elements 8 on this. (I want to use Elements 8 on both the Laptop and Netbook computers because Elements 9 takes up too much disk space).
Unfortunately before I could deactivate Elements 8 on the Desktop its hard dsk failed (and I no longer have it). Is there any way in which I can get that deactivation made?
Anthony.

You will need to contact Adobe support. They will do the deactivation thing for you. Please visit : http://forums.adobe.com/message/5004350#5004350
Thanks
Andaleeb

I am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?

i am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?

There is nothing to prevent him from downloading and installing the trial version (Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe). At the point all you need to do is provide him with the serial number so that he can activate it. If the intent is that he be the owner of the software then you might want to see about transfering the license...
Transfer an Adobe product license

COPA: how to identify which cost element for sender and receiver in IMG

Hi Guru,
I know my cost element for sender and receiver from the settlement document, but where in IMG, i can identify how it settup to use which cost element for my sender - order , which cost element should be used for my reciever profit segment.
Thanks,
Kick

Hi,
Go to KEI1
Select your transfer structure
double click on assignment lines
check the source and value fields to get the mapping.
Regards,
Sridevi
<i><b>Pls. assign points, if useful</b></i>

Goods delivery error for transfer posting

I have created a P.O for transfer posting for a material from Plant 2000 to plant 3000.where in my account assignment I have mentioed the WBS element.
created the delivery document---VL10B and outbound delivery VL01N.
during PGI, system gives error that no WBS element has been assigned.I went to item level and in financial posting TAB page I could not locate the same WBS number in the filed, which is not editable too.the movement type is 641.
Please advcie what other things to check.
Zinni

Check your delivery type which copy control and how this value is passing.I think through some routine it is populated.Check the routine in VOFM transaction.

Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)

Hi Experts,
I am trying to Transport a request from DEV to QA,which consists Transaction Infosources, afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Data element for InfoObject AUFNR 0PM_ORDER could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
Data element for InfoObject TXTMD could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
please Could anyone give the Inputs to solve this , I'll be greatful to you.
Thanks & regards
SK

hello AJ,
Till now the problem is not solved , Please provide some inputs.
here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
Data element for InfoObject KOKRS 0CO_AREA could not be created
Activating Transfer Rules 0CO_OM_NTW_1_SA ...
23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
Formulas have been saved
PLEASE PROVIDE SOME INPUTS.........
Message was edited by:
S K

A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?

A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?

H-SPhoto
That Photoshop Elements 9.0.3 Update has generally been discouraged by the Photoshop Elements gurus. But, I am not going to factor that into this at this point.
This is what I would ask you to look at in the Elements Organizer 9 accessed from the Photoshop Elements 9 or Premiere Elements 9.
a. Create your slideshow in the Elements Organizer 9/Create/Slideshow/Slideshow Editor. Then use the Output option of Edit with Premiere Elements.
From your description, you are probably using the Output Option of Burn to Disc DVD which will take your slideshow directly in the Disc Menu section of Premiere Elements 9. The preferred transfer of the Elements Organizer 9 slideshow to Premiere Elements 9 Editor is by the non wmv route "Edit with Premiere Elements" not the wmv route of Burn to Disc DVD.
Let us explore if any of the above is involved in your issue and then we will decide what next if necessary.
Thanks.
ATR

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

Two Cost Element for the same GL

Hi,
We have 2 Company Codes - 1000 & 2000. We are using same CoA in both the Company Codes. We have a GL, say 12345678 for posting short/excess amount. So during MIRO, the accounting entry would be:
GR/IR a/c dr.          10,000
GL 12345678                  2
                   Vendor            10,002
GL 12345678 would be dr or Cr would depend on short/excess amount.
We have created Cost Element for this GL 12345678. If I post the MIRO without attaching a Cost Center to this Cost Element system thows an error to attach the Cost Center. I have separate Cost Center for Company Codes 1000 & 2000 however I can only put one Cost Center in this Cost Element.
Can anyone advice how can I post the above mentioned entry with different Cost Center. This line item (GL 12345678) is generated automatically and the Cost Center field is greyed out hence I don't have option to enter the Cost Center during MIRO. I checked the FSG of this GL, Cost Center field is 'Optional' over there.
Thanks,
Sandy

Solution Option* -You can assign Differant Cost Centers to Company Code 1000 and Company Code 2000 in OKB9 Transaction Code.Follow the below process....
--- Go to OKB9
--- Select New Entries button
--- Give the Company Code 1000 in first row and 2000 in 2nd row
--- Enter the Cost element 12345678 for company code 1000 and 2000
--- Enter the relevent cost centers for company code 1000 and 2000
--- Select Save
Thanks
Fit 4 Nothing

How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

Dear wise & wondeful people:
How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
Your help would be most appreciated. Thank you so much.
BCHR

Hi BCHR,
If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Notes overview
http://support.apple.com/kb/PH12081
Regards,
- Brenden

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Adobe elements for Mac and CS5 for Mac

Hi, I have two full licenses for photoshop, one for elements and one for CS5. Would it be possible for me to swap the Elements 8 (mac version) for Elements 8 for PC. I want to teach my son to use Elements for his college work, while he has a PC and I have a mac. I bought the Elements for a course that only used Elements but quickly as I moved on I had to use full CS5. I can't remember if I used the elements serial number to upgrade to CS5, where I should have CS4 serial number.

Hi,
As per adobe policy on cross platform swap : http://kb2.adobe.com/cps/405/kb405819.html.
"You can swap only current versions. If you have a previous version, you cannot swap to a different platform or language of the previous version--instead, it's necessary to upgrade."

Had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements

Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

Deactivating Elements for transfer

Similar Messages

Maybe you are looking for