Deactivating Ship to party as mandatory in sales order create-header level

Hi,
I have tried to deactivate the Ship-to-paty as mandatory function,like i don't want to have a ship to party under the sold to party in the sales order header as a mandatory field.
To do this i have removed the partner function SH assignment with KU and 07 in the partner procedure for Sales doc header, and now in the sales order it is not a mandatory function.
But the issue now here is, there is not partner function SH in item level also.
can u pls suggest
SR

Hi,
That is not correct process, U are deleting entire partner function from sales order..
I think what u are asking is while creating order system is showing Ship to party is mandatory. If u want to delete this message then u have to change the Incomplete procedure for that sales order doc type.
Please select that Incomplete procedure in IMG configuration there u just made this ship to party field as optional and dont put it as mandatory then try to create order. It will take data with out ship to party..
( Hope u know how to go through Incomplete procedrue steps )
Please let us know if u still get issue once u do changes in incomplete procedure..
Regards
Sankar

Similar Messages

Issue in population of Ship to party house number in Sales Order

Hi Experts,
I have created a program that creates an IDOC from the input file and then it uses
IDOC_INPUT_ORDERS to create sales order from the IDOC.
Now, the input file has Ship to party that is different from the Sale to party.
So, I created the IDOC with two E1EDKA1 segments.
1> E1EDKA1 and PARVW = 'AG' PARTN = some number from file.
2> E1EDKA1 and PARVW = 'WE' PARTN = value from file
Also STRAS, NAME1, ORT01, PSTLZ, LAND1, REGIO and IHREZ
is populated on the basis of values from the file.
Now, STRAS consists of both Street and House number.
And in my final sales order created I can see all other ship to party details.
But, the house number is being picked from that of Sold to party.
Please advice on how we can get the house number for Ship to Party.
Thanks in Advance.
Amit

Hi Hadiman,
My problem is non population of house no in Ship to party detail.
The house number I am referring is the one of E1EDKA1-STRAS
which is combination of street and house number.
I tried by passing the house number into E1EDKA1-HAUSN . But, again I faced the
same problem.

Ship to party error whils entering sales order

Hi,
After putting sales area (1234/14/00) for order type OR on main screen VA01, received an error on the overview screen as Ship tp party AB1234 in not defined for sales area 1234/14/01 though we have already maintained common division for conditions and customer as 00 for 01.
please guide.
Regards

Hi,
Please check that
1)You have assigned the sales area to the sales document type in SPRO.
Regards
Gaurav

Billing plan (Downpayment) for saved and open sales orders at header level?

Hi gurus,
I have configured billing plan in my SD environment at Item Level.
I want to change it to header level.
Questions:
1- When I make the changes to update the system to have billing plan at header level for future sales orders, is that possible for me to change all my saved orders and open orders with the new settings so that I can also have those saved and open orders with a billing plan at item level?
2- If that scenario is not possible, could we for example copy the data of a previously saved or open sales order into a new sales order with the new customizing (Billing plan at Header level?)
Thanks for your input
Kind regards
Chris

Hi
I am afraid you cannot do that converstion for the existing orders. BP at header level are enabled at teh document type level, while BP at item level is done at item category. So both are independent. Mostly it is advisabel to use BP at item level only.
If you are already using item level BP, and want to mvoe to header BP, then only future transactions can be executed with BP at header level. Existing item level BPlans will remain so in the system.

PO no.& PO dt. to be copied from contract to sales order at header level??

Hi,
I have a requirement, Purchase Order number & date has to be copied to the sales order (header fields below the SP & SH fields) when i create a sales order with reference to a contract. Can you tell which routine to be used in copy control??
Thanks
Ghanesh
Edited by: Ghanesh Visu on Feb 16, 2010 9:17 AM

Hi,
I as far as my understanding you have to create new routine or copy from existing and modify that
and maintain condition P.O & Date should not be change.
Kapil

Copy Billing plan from Quation to Sales order at header level

Dear Gurus,
I am using custom routine (600) to copy Billing plan from Quotation to Sales Order.
I used following code to copy Billing plan.
LOOP AT CFPLT.
MOVE-CORRESPONDING cfplt TO FPLT.
CLEAR FPLT-FPLNR.
FPLT-FPLNR = FPLA-FPLNR.
MOVE-CORRESPONDING FPLT TO XFPLT.
XFPLT-UPDKZ = 'I'.
APPEND XFPLT.
CLEAR XFPLT.
ENDLOOP.
UPD_FPLT = 'I'.
I also tried with CFPLA instead of CFPLT.
Using this code all line item Billing plan is coping into header Sales order Billing Plan (Duplicating records). When I save and come back it is giving Express Document error.
I could not able to save document.
Please guide me this regards.
Thanks,
Vasanth.

Hello Nag,
Did you check your copy control routines in transaction VTAA? You need to see if these fields are included in the routines maintained for copy control between your contract and sales order.
I hope this helps.
Best regards,
Ian Kehoe

How to create ship to party and sold to party for DC10 during sales order ?

Hello all:
When creating sales order for a material in VA01 with sales Org 1000,
distribution channel 10, division 00
The system does not give me any Ship to Party and Sold to Party with the above combination
How to create ship to party and sold to party with the above combination (Plant 1000,
sales org 1000, distribution channel 10, during creation of a sales order
Ironically, when creating material master for a material with a material type KMAT, plant 1000
sales org 1000, the only distribution channel is populating in the input help (F4) is 10
For which no ship to party neither sold to party is maintained in sales order creation
Thanks in Advance!!

Dear Eshwer
It is bcoz, the said account groups (Sold To Party and Ship To Party) are not created in the sales area 1000 / 10 / 00.
To create a customer master, you have to go to XD01, select the Account Group, Company Code and the respective Sales Area and execute. In the Customer Master, you have three tabs, viz.General Data where you have give address details of the customer, then in Control Data, you have to assign the respective Recon Account and in Sales Area Data, you have to maintain the customer's sales related details. Once you give all these datas and save the data, a customer code will be displayed at the bottom.
Now go to VA01, input the sale order type and the sales area and execute.
thanks
G. Lakshmipathi

Ship-to party not defined for sales area

Hi all,
I am really confused while creating a sales order, I need your help.
My sales org. - 1083, distribution channel - CY, Division - CW.
When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
Where did I mess up ?
Thanks,
-Chandru

Hi,
Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
Just try and maintain it there against your account group and against your sales document type in VOV8.
Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
Let me know, reward points if helpful.
Regards
Ravi

Ship to party not defined for sales area x/y/z

Hi Friends,
While creating sales order I am getting following error---
Ship to party not defined for sales area x/y/z .Please help to overcome this problem.
xsales organisation ; ydistribution channel ; z--division
Regards

Please go in Transaction XD01- Create Customer.
then in Account Group, Select Sold to Party.
Assign sales area , xsales organisation ; ydistribution channel ; z--division
and check.
Hope thiswill solve your problem

How to find Ship to party number for a Sale doc.

Hi,
Currently, I have a sale doc number with type ZDR (Debit memo request). Could you please let me know how can I get the ship to party number for that document number.
In General, Could you please show me how to get ship-to party number for a sale doc with all sale doc type ?
Thanks,

Hi Krishna,
Your answer is correct, I just go to table VBPA pass the sale doc number & choose the partner function as ship to party, then I can get the ship-to-party ID.
Hi Sandipsinh,
The KUWEV is the customer master data view that is used in standard T-code. However It is not a table, therefore I can't get data from it.
Hi senya_1111,
You know, with a sale order we have only one sold-to-party. However, we can have several corresponding ship-to-partys.
Moreover, In table VBAK(Sale order header) we just have sold-to-party not ship-to-party. That means we can get wrong value in case ship-to-party is not the same as sold-to-party.
Overall, Thank all of you for your opinion.

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

Change of Sold to Party in Sales order created with Reference to Contract

Dear Gurus
I want to change the sold to party in Sales Order created with reference to contract.
When I create a Sales order with reference to contract the system copies all the partner functions- Sold to, Ship to, Bill to and Payer alongwith other data.
However Sold to is marked as "Grey" and not changable, rest of the partners can be changed.
There is no subsiquent document created with reference to this Sales Order.
Please advice.
Thanks a lot.
Regards
Raghu

Hi ,
Please follow the below mentioned step.
1) Create a partner function letts say Authorized SP .
2) Assign all the possible authorised SP (customer) in the contract.
3) When you create sales order with reff to Contract. Put the customer for whom you wish to create a sales order in release partner tab.
Hop this will resolve our problem
Regards,
Krishna O

How to make field mandatory in Sales Order Item level?

Hi SDN's,
I need to make Shipping type field(Item level) mandatory in Sales order.
Can any one tell me what is the user-exit to achieve this?
Thanks in advance..
Regards,
Rahul

Rahul,
U can check the BADI 'BADI_SD_SALES_ITEM'
othewise u can check
Exit Program MV45AFZZ.
Check the program SAPMV45A
V45W0001
V46H0001

Sales Area mandatory in sales order

Dear Sir,
I want to make Sales area as mandatory in sales order and Inquiry .
When we enter T. code VA01, in initial screen of sales order, without entering sales order document type in sales order VA01, system does not allow to process further.
In the same way I want to make sales area should be mandatory, system should not allow to enter in 2nd screen without entering sales area.
Waiting for your reply.
With Regards
Mamta

Dear Mamatha,
Even if you don't enter the sales area data in the initial screen of VA01 transaction system will ask you to enter sales area data in the second screen of the VA01 transaction,here sales area data is mandatory only, you can't go further with out entering the sales area data.
But I don't know why you want that in the first screen itself.
I hope it will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Jul 10, 2008 10:00 AM

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

Deactivating Ship to party as mandatory in sales order create-header level

Similar Messages

Maybe you are looking for