Deactivating Standard Buttons in Personnel Actions

Hi Friends,
I have a requirement that when a personnel action is executed then the various infotypes that are called based on infogroup must be saved by the user. In other words, the user should not be allowed to exit any infotype by pressing BACK button or NEXT RECORD button. For this we need to deactivate these standard buttons from the screens of Personnel Actions.
Can this requirement be fulfilled? Is there any way by which we can do the above?
Thanks,
VK

Hi
We can't do it with standard configuration.  I think we need to put abap code for doing it.
Earlier we tried doing it but ultimately taken that out as it really take away the flexibility of going fwd or stopping the transaction in between etc.  We got lots of issues around it and finaly we kept it for Change management team to stress on maintaining the infotype. 
Subsequent to it you can also keep some auditing report to monitor whether its maintained or not instead of keeping such code.
Cheers
Sri...

Similar Messages

  • Appraisal template standard buttons not working via ESS/MSS

    Hi experts,
    The error which I am facing in appraisal template is as follows
    When I click on any button on appraisal template no action takes place.
    Kindly let me know how can I resolve this error.
    we are using BSP application HAP_DOCUMENT.
    according to me page fragment 'document_buttons.htm' (Method CONVERT_BUTTON_TO_UI) contains the code for button creation and button handling
    the page fragment 'document_buttons.htm' is getting triggered when page is initialized but it is not triggering when button is clicked.
    Additional info that might be useful to resolve the issue:
    1) While viewing appraisal template's web layout in t-code PHAP_CATALOG_PA.
         I am facing following script error.
         This error reappears when I click on any standard button For eg SAVE
    2)  We are currently using IE 8
    3)  We recently upgraded ECC system from ECC 6.0 to ECC 6.0 / EHP 6 (ECC 6.6)
    4) I checked SICF and corresponding services are active
    Thanks in advance

    Hi Adrian,
    Design2008 service is inactive in my system.when activated temporarily I was not able to see previous page (Blank page was displayed) in my appraisal application.
    For BSP application HAP_document, i checked SICF->default host->SAP->BC->BSP->SAP->HAP_document.This service is active.
    The image which I have attached with my question is appraisal template's web layout in t-code PHAP_CATALOG_PA.
    regards
    Ninad

  • No infotype found in personnel action

    hello,
            i hv created one action in PA(personnel administration). I wanted that action has to come in pa40 screen. so i changed the uger group in the parameter coloumn. but while saving i saw an error message. it did not allow me to save. it was showing error in another coloumn. without checking wht is that coloumn i deleted the coloumn. After that acrion came in pa40. but after hiring a person it is showing no infotype is maintained. even if i go for the standard actin type it is saying no infotype is maintained and it coming out of the screen. i have checked all the configurations. every thing is fine. earlier with a standard action i hired a person, everything was fine then.
    plz find me the solution soon.
    thank you.
    sudha.

    Dear Sudha
    Check whether user groups are maintained properly.
    Secondly, check whether you have created Infogroups and assigned the infotypes in Sequence.
    Also check whether you have maintained Infogroup properly against the Personnel Actions.
    Customizing Procedures
                                         Actions
                                                    Set up personnel actions
    Regards
    Vikas

  • HR Headcount and Personnel Actions(0PA_C01) std routines not working

    Hi Friends,
    I have loaded data for Headcount and Personnel Actions(0PA_C01) cube. Here the fields below mentioned are not populating data which are with standard routines. I checked code and also gone through sdn and also with SAP notes but every thing ok.
    We are working with support package 16.
    0AGE,
    0AGE_RANGE,
    0GT_PLAND(country key),
    0COUNTRY_CODE,
    0GENDER,
    0NATION,
    0PERSLANGU,
    0POSTAL_CD(Postalcode),
    0REGION,
    0MAST_CCTR,
    0CNTRCTTYPE(Contract Type),
    0PAYPCT_CHA(Capacity Utilization level in %),
    0HDCNT_FTE(Head Count FTE).
    Can u please give me your views to populate data to the above mentioned fields.
    Here 0GENDER,0NATION,0PERSLANGU,0POSTAL_CD(Postalcode),0REGION are attribute of 0PERSON and in turn is an attribute of 0EMPLOYEE. I can able to see data individually from both 0PERSON and 0EMPLOYEE. but i want to see data attribute data of 0PERSON in 0EMPLOYEE.
    Is it possible? If possible Can you please Explain me?
    Regards,
    Sridhar

    Adjusted transfer rules, so now standard routines are correctly populating fields.
    I have doubt on two fields of cube,
    keyfigures: capacity utilization level
                     head count FTE which is (capacity utilization level / 100)
    Is capacity utilization level  field in BI is equivalent to R/3 Staffing Percentage field ?
    (The staffing percentage indicates which percentage of an employee's time is to be spent in the position entered). If not what field in R/3 is equivalent to capacity utilization level .
    Regards,
    Sridhar

  • MSS and Personnel Action

    Hi Experts,
    What is the relationship between MSS and Personnel Action (PA40)? Can a manager that have access to mss perform personnel action (eg Organizational Transfer) for his/her subordinate employees? Thanks

    Yes as indicated above use processes and forms which are standard delivered and mimic the pa40
    you can create your own forms just like actiions
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/2e/5a5d45d9f24fbdb06be2ff53651c3e/frameset.htm

  • Maintaining IT0014 and IT0015 through Personnel Actions or PA30

    Hello,
    I have one query. I would like to know the standard practise for maintaining the Infotypes 'Additional Payments' and 'Recurring Payments'. Is it advised to maintain those through Personnel Actions or directly through PA30? My client wants to know what is the good practise?
    Thanks in advance.
    Madhu

    Madhu
    It depends upon the requirement of the client
    Ex: in some of the cases we have food allownace will be the part of Structure and it is irregular income in that case the user has to maintain at the time of the hiring so in that case you have to maitain it in IT0014 and after some time he may ask the user to cancel the allowance and to add the income in special allowance etc
    Comeing to to IT0015 it is one time payment in order to decide you have to check with the functionality of the wage type

  • Widgets buttons no advanced actions

    help me...
    I've started a project for this company and they are using cp5 for theri e-learning tool, its my first time using it, although i have made other e-learning packs with CP2/3
    i wanted to use the fancy new widgets and have swf buttons on my menu page but I'm having problems with them not actioning and pausing the slide. I tired everything but they don't seem to jump to the correct slide, or pause the slide.
    There is no advanced action option in the widget so I can't command them that way and when I hit the back button the the hold movie play with no pauses at all...
    what wrong with it any ideas.
    JSP

    Hi,
    I think i need to understand how button widgets pause a slide before it continues, I have a next button on my slide and its a flash version from the widgets panel. just a standard button on from captivate 5 library, but when i go into the options to say on click go to slide whatever it doesn't pause the slide and there is no way to adjust the pause on the button. On a normal button you can just add advanced option to progress when the delegate click or to hold until they do so. but here we have no such options
    so all I need to understand is click button to move forward - not automaticly- and when i go back click button to move forward again not play all slide until then on
    jas.

  • SAP WebGui -  Hide "Standard buttons"/ "Address/navigation bar"

    Dear,
    We would like to use the WebGui for some HR transactions.
    To prevent some wrong operation executed by users like selecting "Back" button and "forward" button of Web browser (IE or FireFox), we would like to hide "Standard buttons". To prevent also any URL modification, we would like to hide the "address/navigation bar" and if possible the "menu bar (File/Edit/view/Favorites)"
    Could you please provide us your help?
    Thank you,
    Regards,
    Z. Lamarti

    Hi Z. Lamarti,
    I can assist with two out of 3 requests. However your request are really IE / FIREFOX rather than ITS/SAP
    First read the following WIKI in relation to:
    "To prevent some wrong operation executed by users like selecting "Back" button and "forward" button of Web browser (IE or FireFox), we would like to hide "Standard buttons"
    The following has nothing to do with the Browser buttons - but helps in restricting the access of the ESS services accessed via the ITS
    [How to terminate a user session with integrated ITS when the transaction |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25427]
    AND
    [Article - Employ SAP GUI for HTML instead of an Internet service |http://wiki.sdn.sap.com/wiki/display/HOME/Article-EmploySAPGUIforHTMLinsteadofanInternet+service]
    RE URL's
    Rather than hiding the bar - could use a Reverse Proxy. The SAP WEB Dispatcher can be used for this function.
    See:[SAP Web Dispatcher |http://wiki.sdn.sap.com/wiki/display/SI/SAPWebDispatcher]
    In order to secure your SAP system you can put an SAP Webdispatcher (or application gateway like a reverse proxy) in the outer DMZ, which filters the incoming requests and forwards them to the corresponding application servers.
    Regards,
    Oisin
    Edited by: Oisin ONidh on May 30, 2011 4:10 PM
    Initial URL's had a strikethrough in them

  • User Exit for Special Personnel Actions

    Hello,
    I would like to figure out a way to generate an email when HR does a termination action. Can you help?
    Can this be done by enhancing the user exit - Please help with the steps!
    Here's the - User Exit for Special Personnel Actions:
    This step enables you to implement the following user exit for the Customer Enhancement for Special Personnel Actions:
    EXIT_SAPLHRBAS00ACTIONS_001
    Thanks!
    PS

    You need follow the below steps to activate the user exit.
    1. Goto Transaction CMOD.
    2. Create a new project or select an existing 'Z' project.
    3. Click on the Enhacement tab on the application tool bar. Add "HRBAS001" as the enhancement.
    4. Save it and click on the componet tab. You will see the exit EXIT_SAPLHRBAS00ACTIONS_001. Double click on this. It will take you the fuction module interface and you see the include zxhrbas00actionsu01 in it. You need to double click and add your custom code there.
    5. Activate the code. Come back and active the enhancement and the project.You see the active button on the application tool bar.
    Then this gets triggerd from PA40/PA30 and sends the notification as coded in the include program.

  • How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

    Hello,
    how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap  alv
    Thanks
    Rakshar

    Use  this.
        data lo_cmp_usage type ref to if_wd_component_usage.
        lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
        if lo_cmp_usage->has_active_component( ) is initial.
          lo_cmp_usage->create_component( ).
        endif.
        data lo_interfacecontroller type ref to iwci_salv_wd_table .
        lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
        data lo_value type ref to cl_salv_wd_config_table.
        lo_value = lo_interfacecontroller->get_model(
        data: lr_std type ref to if_salv_wd_std_functions.
        lr_std ?= lo_value.
        lr_std->set_export_allowed( abap_false ).
    NOte: ALV1 is alv component name
    Regards
    Srinivas
    Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

  • Error in setting new personnel actions

    hi
    im trying to use the 'set up personnel actions' node under customizing procedures. when i click the new entries in personnel actions system throws the following error...could someone plz help
    Error: Upd.0000 = 'X' is only allowed for Upd.0302 = 'X'
    thanks
    S S

    You will get this error if the additional actions are active.. What is the value of <i>gsval</i> in the table <i>T77S0</i> for GRPID = ADMIN & SEMID = EVSUP ?
    ~Suresh

  • How to use mp3 files on a form standard button, instead of wav-files. Need to save space.

    I would like to use mp3 files instead of Wav-files on the standard button, in the forms edit menu. I know it is possible in the interactive menu to add buttons with mp3 sound. But those buttons has not the same options and appearance as the forms buttons. We create learning books with lots of sound files in each PDF, so with wav-files the PDF gets quite heavy in Gb.

    Smokerz – Thanks for the feedback. I managed to get iTunes to find the movie files on my TC by simply dragging the icons of the files on the TC into the Movies folder in iTunes. This immediately made them available for streaming on my Apple TV. Also, I learned with great relief that, despite their large size, dragging icons of my movie files into iTunes did not copy them to the C: drive on my desktop computer. Thus, it looks as if the job is pretty much done. Thanks again for your advice.

  • How   to customise Personnel actions in Vesion 3.1 I

    Hello Experts,
    I have to  configure Personnel actions in version 3.1 but I could not find the node for the same .......Please help as it is urgent..
    Thanks in advance
    Rajeev Chhabra

    Hopefully, this should help.
    Even though it's vista specific, it should on windows 8 as well.
    Effects panel
    Install Actions in Photoshop Elements 7 on Vista
    Action player
    Install Actions in the PSE Action Player

  • Standard button image problem

    Hi,
    I've got a problem when I try to set Image to the button from standard components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine, unfortunately I need that component from standard.. any advice?
    thx.

    Hi,
    I've got a problem when I try to set Image to the button from standard
    components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine,
    unfortunately I need that component from standard.. any advice?
    thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
    Hope it helps,
    Lark

  • AlV Grid Standard Buttons

    Hi ,
                How to remove the standard buttons on the WD4A alv grid like View (Std. View) , Print Version , Export , Filter , Settings.
    Thanks,
    Kumar

    How did u solved ?

Maybe you are looking for