Deactivation and then Activation on another computer
I purchased and then downloaded via internet Adobe Photoshop Elements 9. Then bought a new computer. How do I deactivate Adobe Photoshop Elements 9 from one computer and then activate the progam on another computer?
Choose Help > Deactivate on the first computer and then uninstall the software.
Install on the second computer. The software should activate automatically.
See http://kb2.adobe.com/cps/100/1008779.html for details.
Similar Messages
-
my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?
Apple's activation server is down.
I called Apple and the support team had the same issue.
All you can do is be patient. -
My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.
The ethernet says self assigned IP 169.254.67.6
Then the ethernet is not getting an IP from the TC.. there is no connection.
I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
Thanks
In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
To get access to the TC you need this led to be green.. is it?
If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
How old and what model is the TC?
The A number from the rubber mat will tell us the model. -
my iphone is synced and backed up with another computer which is now broken...i have synced it with my new computer but it hasnt transfered anything over to itunes and when i try to add anything to my iphone it says all data will be erased and replaced with the current itunes? i dont want to lose all my apps and music.... i dont know how to go around this problem? i want to back it all up and sync it properly to my new computer so that is now my main computer , so i can add ring tones and music etc with out it erasing everything ive got. any answers would be great and muchly appreciated. thanks, im not sure what operating system my iphone has either.....
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup. -
Hello there ive just downloaded 2 albums from itunes store and found that they only play for a short while and then flips onto another tune which again only plays for short while so on and so forth which makes the albums completely useless does anyone have a solution?
Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2 -
VLM licenses "Already activated on another computer"?
I already had at least one user with this issue before receiving our recently renewed VLM license. We use VLM licenses in disconnected mode exclusively as most users or are located in satellite offices.
In the license manager on the end user's machine, the status says "Already activated on another computer". The Note says "Contained in a disconnected license" blah blah blah ...
The documentation says "Note Disconnected and home license files generated by NI Volume License Manager do not need to be activated.". However, these users keep getting asked to activate.
Certified LabVIEW Developer
NI-VLM AdministratorJulie,
National Instruments products' activation revolves around the Computer ID. The Computer ID is based on the physical (MAC) address of the network card by default. If either a network card is replaced or multiple network cards are present, the changing MAC addresses might result in unactivated software. You can confirm this by checking out the computer ID in the client computer's License manager and VLM on server. They probably no match each other.
In order to remedy this situation, contact National Instruments support (ni.com/ask) so that a Computer ID can be generated which is based on the hard drive serial number of your computer rather than the physical (MAC) address.
Message Edited by Song D on 12-11-2007 10:20 PM
Regards,
Song Du
Systems Software
National Instruments R&D -
I use my PowerPC Quicksilver G4 (2.1), 867 MHz, 1.5 GB standart video card system 10.4.11 to scan (lack of driver for my Mac Pro 10.6.8)
The G4 has been running flawless, now I get kernel panics every time (shut down your computer). When it stays on I get blotched video
left-over spots, tearig and then shut down your computer...
I did all recommended software tests Diskutility, rebuild with DiskWarrior and Apples full Hardware test. Everything comes out fine!
I am at the end of my know how. Thank you for any help
W.W.
I am attaching the latest crashreport:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000047AC834E PC=0x0000000000821D3C
Latest crash info for cpu 0:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x37D2EA00)
PC=0x00821D3C; MSR=0x00009030; DAR=0x47AC834E; DSISR=0x40000000; LR=0x00821D24; R1=0x21E23B40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00032E98 0x0081AB20 0x0080AC74 0x002E9A80 0x002EB94C 0x0008C248
0x00029234 0x000233F8 0x000ABEAC 0x5038514E
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Exception state (sv=0x38A98780)
PC=0x9000B348; MSR=0x0200F030; DAR=0x01785000; DSISR=0x42000000; LR=0x9000B29C; R1=0xF0202F20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8 Model: PowerMac3,5, BootROM 4.2.5f1, 1 processors, PowerPC G4 (2.1), 867 MHz, 1.5 GB
Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB
Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333
Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333
Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333
Modem: Spring, UCJ, V.90, 7.0F, á¸
Network Service: Built-in Ethernet, Ethernet, en0
Parallel ATA Device: WDC WD1200JB-00GVA0, 111.79 GB
Parallel ATA Device: ST3120814A, 111.79 GB
Parallel ATA Device: PIONEER DVD-RW DVR-103
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Fujitsu Takamisawa Component, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mAThank you for your reply BDAqua.
Yes I ran short and the Extended Test. All pass. One of the first things I did is Safe Boot several times I also repaired permissions. Safe boot takes no longer than before the crashes and as long as I stay in safe boot mode it won't crash. What does that mean?I also ran MacJanitor and removed the SCCUZI card Apple put in when I bought the G4 as well as an M-Audio Delta 66 card which I do not use (both) anymore. I also started up on an external firewire drive 10.4.6. It also (crashes) does the same thing.
I was hoping somebody understands the crash report I enclosed? Isn't that suppose to say what went wrong?
Thank you again for your input BDAqua
W.W. -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
My computer crashed with all my itunes files. I was able to get some off and transfer them to another computer. I am afraid to sync my ipod to the new computer becaused I do not want to loose all of my playlists and other music. Will this happen?
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them. -
Hi
I had a iPhone 4 and then got a new computer, I installed iTunes to it but my new computer refused to sync with my phone, i backed up my phone via icloud and purchased tracks etc from iTunes, but now i have a new iPhone 5C and I backed it up via the icloud, not all data was transfered, music etc.
Again my computer will not sync with the new phone, it doesnt see the phone within my libary, doesn't give an option to do any thing with phone
Can so one please let me know were Kim going wrong, I have authorized my computer to itunes I really don't know what to do now?Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend. -
When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you
Hi elliezzz,
If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
- Brenden -
Can I reinstall Adobe Design Premium cs5.5 Student and Teacher edition onto another computer?
Can I reinstall (deactivate on old computer and activate on new computer) Adobe Design Premium cs5.5 Student and Teacher edition onto another computer? If this is possible would I have to prove that I am a student again, send you the documents etc?
Can I reinstall (deactivate on old computer and activate on new computer) Adobe Design Premium cs5.5 Student and Teacher edition onto another computer?
Yes.
If this is possible would I have to prove that I am a student again, send you the documents etc?
You have a permanent serial number from when you did this the first time and that is all that is required.
Mylenium -
I cannot connet to Home Sharing on iTunes, so that I can send movies and TV shows to another computer. I cannot find the name of the other computer in the "Library" box on the upper right side of the iTunes screen. Do I need to have the other computer connected to the Cloud?
Mkae sure you have enabled Home Sharing using the same AppleID on both computers.
-
Two weeks ago Purchasing 60 songs from iTune store.So Two of them play only half of song and then jumping to another songs.What is could be?Looks like is not been downloaded full.Can i get this two songs to play correct?Many thanks Aleksejs!!!
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
i have a new iphone 5c replacing my iphone 4s. I backed up my 4s info on iCloud and then activated the new phone and downloaded from iclould. I then erased all info on my old 4s. However, I still can't get cellular service on my new phone. help!
Keep powering your phone off and back on, it can take up to 2 hours for a normal service provider to finalize the activation process. When you got your new iPhone (congrats by the way) you should have received a little bubble that appeared that told you when the phone was activated, did you see that?
Maybe you are looking for
-
PI in ECC 6.0, usage type AS ABAP
Dear all, Is there any restriction on the functionalities of PI/XI in ECC 6.0 (with ABAP only)? Can I have full XI functionalities if when I install ECC 6.0, I also check AS Java? Giang
-
Can't connect to router with non airport wireless
I try again... my Imac won't connect wireless to my router. It actually connects, Imac says everything is fine, but when I connect to the internet, the colourfull little wheel is spining for hours...and nothing shows up. With the same settings, using
-
Cisco Prime Infrastructure 2.1 wired client show Wrong port speed.
Hi, i have odd issue for some reason the port speed in the wired clients shown a wrong speed, can some explain how the speed detremained and why i'm getting a wrong speed port of 10mb for a pc/host when my network is at least 100mb, thanks
-
Director 8.5 content in mac OS X
I'm not a Director user, so please bear with me. I maintain an interactive kiosk in a children's discovery room. The content for the kiosk was created with Director 8 educational version some 6 years ago and has been running on a G4 tower operating o
-
Do not compatible with old verzion. OSX 5,6,7 ?
apple as I do in the future. I have it every three years to buy all new equipment? imac iphone ipad ibook = € 5,000. just because the numbers is not backward compatible