Deactivation Impact of ISO Code and Vehicle country key
Hello All,
We have a requirement to use the BSEG-KIDNO in accounting document line item. This field has to do some calculation by using Validation exit. This calculation works fine except for certain countries like Sweden(SE), for which some standard function module is triggering. On further research we have found that by deactivating the country specific checks( Vehicle country key and ISO code) we can deactivate the standard function module and make our validation exit work. This can be acheived by making blank for "Vehicle Country Key" and ''ISO Codeu201D in OY01 (IMG--> General setting --> Set country --> Define country) for Sweden.
Could you please explain what will be the impact in other areas by deactivating ISO code and Vehicle country key in OY01.
Appreciate your reply.
Thanks in advance.
Prasad
Hi Prasad,
You should not remove them since
ISO
The entry is used in countries of the European Community to check the
VAT registration number (VAT reg.no.). You can store the VAT
registration number in the master record of a customer or vendor, or for
the company code.
The ISO code is used as the country key when exchanging information via
EDI. You must therefore specify the ISO code for each country in this
field if you use EDI.
The ISO code also controls which additional specifications are relevant
for a company code. You can always only enter the additional details
which are relevant for the company code country or for all countries.
The assignment to the country takes place via the ISO code.
Vehicle country key
The vehicle country code is a standard key worldwide. It does not depend
on the country in which the SAP System is installed.
The key is therefore used as a basis for accessing country-specific
check routines. Furthermore, it can also be used as a supplement to the
postal code.
This key should be specified for all entries in the country table.
Can you check the OY17 setting under the Further Checks Bank data check box for working Country and Sweden?
Reg
Vishnu
Similar Messages
-
Need to know alternative country Key and Vehicle country Key
Hi Experts,
I am defining new country codes in SAP ECC and GTS System. Can someone help me to find out Alternative country key and Vehicle country key for the below mentioned country Codes.
AX
Åland Islands
GG
Guernsey
IM
Isle Of Man
JE
Jersey
PS
Palestinian Territory, Occupied
TL
Timor-Leste
Please assist me in this regard as this is very urgent.
Thank you
Vinod KakarlaHi,
Use Tcode - VI78 to find alternative country key
T coe - OY01 for vehicle country key
001 (European standard formatting), 002 (Italy), 011 (Switzerland) and 014 (Austria) use the vehicle country key of the relevant country. If no vehicle country key has been maintained in Customizing, the country key of table T005 is used instead. If, for the sender country, the indicator for printing the country name in foreign addresses is set in table T005 , the system does not use the country key, but generally prints the country name in the last address line. Check the sap Note: 1509425.
Ashish -
Hi friends,
Can anyone tell me what is this ISO code of the country? where we will maintain this? While creating Billing document its giving error like ' first 2 characters of VAT registration number does not match with ISO code of the country'. Can anyone explain me this in detail and soultion please.
Regards
RameshHi Ramesh
I have been seariching various books / URLs on the issue you recorded and in one of the URL / books, the following is printed.
<b>Countries, units of measure, currencies and other amounts are transferred according to the ISO standard If there is no ISO code for SAP_Code, the SAP_Code is transferred (outbound)
If the ISO-SAP conversion in inbound processing is not completely clear, an error message is issued</b>
By comparing the above comments with the issue you recorded, I feel that in the billing document, some of the material might be an imported one and it has been created with some wrong details or Vendor details might be wrong.
I am not sure on the above. As of now, I could give only the above hints. Will try and give you more feedback if possible.
Thanks
G. Lakshmipathi -
HT4528 went to new iso 7 and now slow key strokes
went to new iso 7 and now very slow key strokes on keyboard
I have the iPhone 4 and I had the exact same problem. I did like ^^This guy suggested and fixed it by going to SETTINGS>GENERAL>RESET>RESET ALL SETTINGS. High fives!
-
Hi guys,
I'm defining a new country into the step 'Define countries in R/3 system' : this country is 'Serbia-Montenegro' but when I click on 'New entries' and I'm seeking for the code country I don't find it..and the same thing it happens for the ISO code because I don't find the step into customizing where I can enter the ISO code which I after should select (CS) while I enter the severals fields into 'Define countries in R/3 system' in customizing...How can I do?Thanks in advance bye
MaximilianHi,
Codes used in Foreign Trade Statistics (Note 851943) and ISO codes (Note 693152 / 1932513) are quite often identical but not always. This is the case for Serbia and Montenegro.
o Country XM
Alternative key: 097
Name: Montenegro
ISO code: XM
o Country XS
Alternative key: 098
Name: Serbia
ISO code: XS
Please assign points if it useful.
Regards
Ravinagh Boni -
Country Key does not have the ISO Code
Hi,
I am facing a problem in MIGO. While doing MIGO I am getting the message
Country key has no ISO code
Message no. B1881
Diagnosis
The country key is not assigned to an ISO code.
Procedure
Assign the country key to an ISO code.
I have checked it in all respect but not able to resolve the issue. Even if I am doing it with other company codes it is showing the same error.
Kindly help. Relevant points will be given
Thanks in advance,
KamiThanks for the reply,
But I can see that ISO Code and ISO Code 3 Char , both are defined for my country India.
ISO CODE : IN
ISO CODE 3 Char : IND
Kindly let me know if it is correct and suggest further.
Thanks
Kami -
Error: "COUNTRY CODE HAS NO ISO CODE"
Dear All,
i am getting this error while doing Invoice Verification of Purchase in MIRO
plz help me.
thanks,
RPHi RP,
To assign the ISO code for a country, proceed as below.
SPRO>IMG>SAP NetWeaver>General Settings>Set Countries-->Define Countries in mySAP Systems.
Selct your country code and see the details. In details page you can assign the ISO codes.
Regards,
Madhu. -
To get the company code and country grouping attached to a position
Hi everyone,
I have a position and I need to get the company code and the country grouping that this position is attached to. Could you kindly suggest an FM or a class which would fetch the above data keeping in mind the inheritance tree. That is, if the company code is not maintained in HRP1008, then it should look for the same in the Org Unit that this position belongs to and so on..
Any help will be greatly appreciated.
Regards,
Alpana.Hi
Check the A011 relationship of the position and get the cost center, from cost center you can get the company code and country grouping from Cost Center Master CSKS.
~~~Ganesh Kumar K. -
ISO code 0 is not correct in the VAT registration number
Hello everyone!
Where can I adjust this error message so that I can make it as a Warning only? Thank you.
Message No. AR191 -- ISO code 0 is not correct in the VAT registration numberDear Marlon
Goto
IMG>SAP Netweaver>general setting>set countries>Define Countries in mySAP Systems>select the coutry and double click on it>u will get properties tab under which ISO code is defined. Here u have to enter country name in ISO CODE and ISO code 3 char [enter the relevant 3 char as per your country.
Also check Set Country-Specific Checks--> double click on country and check the length and checking rule (ex vat reg no)
Hope your problem will be resolved
Regards
Sandeep Bhowmick
Edited by: Sandeep Bhowmick on Sep 29, 2009 12:00 PM -
Dealing with error:AR191-ISO code in VAT Registration Number in Cust Master
Hi,
While creating a Customer Master, user wants to enter a VAT Registration number (in the control data tab) which begins with a country code(ISO code) that is not the country code of the company code for which the customer is created.
As a standard practice, system prevents this throwing error AR191 suggesting that ISO Code not correct in VAT Reg. number
Is there any way by which we can still allow user to enter a VAT registration number of his choice & requirement, which is not beginning with the ISO code of the country in which company code exists
See example below:
Country of Company Code XYZ :UK
Customer Created in this company code should ideally have VAT Reg. Number starting with ISO code for UK but user wants to have a different VAT Reg. Number used which is not starting with ISO Code of UK.
Is there option available in SAP by means of which we can deactivate this check?
In the configuration for u2018set country specific changeu2019, we can select options based on the length of the VAT Reg. Number and itu2019s formatting but how can we get rid of the check on ISO code?
Thanks in advance
Regards,
BMThe length of the VAT number, which is important for this check,
is stored in field UINLN.
If the check comes across an invalid format, an incorrect country key, or an incorrect check digit, the exception NOT_VALID is triggered, and an error message is sent. If the check runs successfully, nothing will be drawn to the attention of the user.
The check rules are stored in table T005 in the field PRUIN.You can deactivate the following rules.......
1 Maximum value length, without gaps
2 Maximum value length, numerical, without gaps
3 Length to be kept to exactly, without gaps
4 Length to be kept to exactly, numerical, without
5 Maximum value length
6 Maximum value length, numerical
7 Length to be kept to exactly
8 Length to be kept to exactly, numerical
9 Check against country-specific edit format
10 Deactivate Postal Code Check for USA
Please do this.
Regards,
Dhrubashis De -
Dear Experts,
i am facing the following general question - based on SRM 7.0, CS
On the R/3 side, we have three different systems in use, to which SRM is connected. All these different R/3 systems are having differences in the used UoM / ISO codes of UoM.
We are now trying to consolodate all these differences in one of the R/3 systems, before we than do the replication of the UoM data from that R/3 system to SRM.
As part of this consolidation, in all three R/3 systems there are some ISO codes, that would need to be changed.
Has anyone faced a smilirar consolidation task before?
I am looking for experiance pointers regarding the question, what points i would need to keep in mind and to test in these R/3 systems, if i change the ISO codes?
Thank you very much!We faced a similar situation at one of our clients. Consolidating is not easily done. We said at the end that we have a 1:1 relation between ISO-Code and UoM in SRM and only make the UoM visible which exist in all systems.
We harmonized the UoM as followed:
Int. meas. Unit: PCE
Commercial: PCE
Technical: PCE
Long Text for UoM: Piece
Short Text for UoM: Piece
ISO-Code: PCE
Primary Code Flag: X
Commercial meas. unit: X
With the Commecial meas. unit you can have the UoM invisible.
Changing them in the ERP is almost impossible as they are used everywhere and this is a bigger task.
Have fun
Jens -
Can we change the ISO code of existing UOMs?
We have developed a new global R3 initiative where we need to merge UOMs from different regions (from different R3 systems) and we have discovered some UOMs have a blank ISO code - can we change the ISO code and what should we check for please?
Many thankshi
yes u can change it in the transaction CUNI
For additional information see OSS note 69063.
regards
kunal -
Hi
There are 5 countries(eg, BL,UN,EU) maintiained in the country list table (V_T005) with no ISO code associated with it. We are integrating SAP and Ldap and since these countries have no ISO code associated with it the Idoc generated are having errors.
Is it ok if we delete these country field in SAP. Will it have any impact on any other data.
Valuable inputs from HR consutlants are inivited.
Regards
Sasha.Dear Sasha,
Please check out note 1164216 :
<< In a customer system the country table can be adjusted specifically for the customer. The customer entries are not
overwritten by an SAP upgrade. >>
And also you will find in this note an attachment with all the iso code supported by SAP. You will then have to create these entries.
Hope it helps,
Christine -
A table mapping between ISO country code and ISO currency code
Hi experts,
I want to know whether there is a table mapping between ISO country code and ISO currency code.I have searched T005(Countries) and TCURC(Currency Codes).why the filed of WAERS(Country currency) hasn't maintained in talbe T005?Whether ISO country code and ISO currency code hasn't direct relation?
Regards,
KelvinKelvin,
If you know the table which is having ISO Country Code or ISO Currency code,then go to that table and clik on GRAPHIC(ctrlShiftf11) which will give the foreign key relationships.I guess checking all those table displayed in the graphic will give you some lead.
K.Kiran. -
I forgot my security code and my rescue email has been deactivated how do i reset the rescue account remember i do not remember the security codes
You need to contact Apple to get the questions reset; this can be done by clicking here and picking a method for your country, or if that's not an option, by filling out and submit this form.
(95840)
Maybe you are looking for
-
DDIF Function Module for getting the description of a BAPI structure
Hi, I need to find a function module that returns the description of a structure...well a BAPI structure, not that that makes any difference. The DDIF_ function modules I've tried will all return the descriptions of data elements in tables, but not s
-
Set default "Dropdown Lists" to "By value"
Hi , In the WebUI under Personalize / Personalize Settings , the user can setup the parameter "Dropdown Lists" to be "By value". We want to setup that at the system level , so every connection to the WebUI will have the Sort in the Dropdown Lists by
-
ChooseFromList for Customers by Screen Painter
Hi, I don't know how to start on just adding a ChooseFromList for customers on my Screen Painter form. Any tutorials, videos anything out there to show me how to compelte this task ?
-
About the HD: I will buy an external drive (it's easier than install it inside). My computer uses ATA drive. 1) Most brand do not mention if they are ATA or SATA. Does it matter if I buy an external drive ? 2) I see in my catalogue from Mac connectio
-
Setting poster frame for front row
i am in the process of putting a bunch of videos on my hard drive to use in front row. the problem i am having is that front row basically shows the 1st frame as the poster frame. so i have no clue what the episode is about. if i set the poster frame