Deactivation of dep area in asset master data

Hi,
I am trying to deactivate a dep area in an asset.
I could see deactivation check box available in AS03, but when it comes to AS02, I am not able to see the deactivation indicator column and also does not appear if I double click and go inside dep area details in As02.
I check screen layout for dep areas applicable and screen layout mentions deactivation indicatoy is optional.
So how could I deactivate in AS02 now?
Regards,
SKD

Hi Viswa
It is no authorization issue.. It is expected and standard behaviour
You cant deactivate any dep area in the asset master once you create and SAVE.. In the current circumstances,
a. Put a deletion flag in the Asset Master... If any values are posted in it, then scrap the asset w/o revenue
b. Create a new asset and deactivate the Dep Area in it
BR,Ajay M

Similar Messages

How to include depreciation are in asset master data

I have already activated depreciation area in the asset class but it did not appear inn asset master data.
How to include it there?
Tks,
Naej

Hi,
There are 2 aspect which you need to consider.
1) For exisiting asset as used AFBN as suggested by Srinivasa to activate the depreciation area.
2) For new asset OAYZ configuation would populate the dep key and life.
Thanks
Vaibhav
Edited by: vaibhav patil on Apr 22, 2010 10:40 PM

How to update the New Depreciation Area in Asset Master Data

Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
Srinivas

Hi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
           Do not set this indicator if you want the system
           to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard

Screen Layout for Dep Area in Assete master.

Hi,
I am trying to display the fields "Expired Useful Life & Expired life -Period" in Dep areas tab of assets master.
My screen layout is 1000 Dep on main asset level.
i have assign this to Dep area in OAYZ.
I made these 2 filed optional in screen layout,even though i am not able to see these fields in asset master.
When i tried to other fields , it got effected.
What is the reason behind this?
Please provide me the solution to display these fields in asset master.
Thanks Regards,
Uday

Hi,
I checked all stated things.It is right.
Still i m not able to see it in master.
When i go to envirnment in aso2, it shows the screen layout rule with these fields as optional.
So i am not able to understand ,how to bring that fields?
Please anyone provide me the solution.
Regards,
Uday

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

Depreciation area set in Asset Class does not appear in asset master data

Depreciation area does not appear in the asset master data however it is set in the Asset class. If other asset is created in the same Asset class that depreciation area is automatically set in the asset master (it proofs that it is not a problem with Asset class).
I tried to set that deprecition area directly in the asset master data but all the fields are blocked for changing (is it possible to change that?).
What should I do as I need to post on that area ?
Thank you,
Jean

Ok Zaid! thanks,
But what treatment should I give to that asset? Because now it is not being evaluated in that area but we need to do it.
The asset was created in the prior exercise (year).
Regards,
Jean

About settlement, asset master data's amount column value

Dear Experts,
I build an aseet master data : A (the amount column's value is 0 in asset master data)
Then, I build an asset purchase order assign to A , after I do GR, A's amount column's value change to 1.
But if as follows,
I build two asset master data : B and C ,
B's asset catalog is 167200(prepay for equipment) , c's asset catalog is 153100 (normal fixed asset)
Then , I build an asset purchase order assign to B, then do GR , B has amount 1, and then ,
I do t-code: AIAB , settlement B to C , I found B's amount column's value still show 1 , and C is still 0 ,
but the asset value certainly has transfer from B to C......
why B's amount column's value doesn't be changed?
I can't figured out.
Thanks a lot in advance.
Best Regards,
Yacoa
Edited by: Yacoa Chen on Mar 15, 2011 9:14 AM

Hi
If B is still showing value - It means values are not settled
After AIAB - You need to run AIBU to settle the values.. Did you run AIBU??
Br, Ajay M

Attaching document in the Asset master data

Hi All,
If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this in SAP?
Also while doing asset transfer, how can we transfer the attached documents?
Please provide inputs.
Regards,
Jayasudha

Hi ,
Below is the configuration steps
Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
Â· Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
Â· Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
Procedure
Then if you check the service object in AS02 it will be in active status.
Regards,
Jayasudha

Creation of asset master data

hi sap gurus,
i have a problem regarding saving of asset master data.
while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
you cannot save the asset(correct depreciation error)
Diagnosis: you have choosen the function save.the system found an
internal problem when calculating depreciation for a check document.
sys responce:The asset cannot be created
procedure:1 check the error from depreciation calculation by
performing the function "Test doc.'again.
2 if you cannot correct the error ,contact your sys specialist.you
must then cancel your current processing.
please help me regarding the problem......

hi
check your depreciation area settings for the asset class

Modify fixed asset master data thru migo

Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
Ruben

Hi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne

How to activate fields under origin tab in the asset master data

Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
Ramachandra

Hello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra

Custom Field in Asset Master Data

Dear Experts,
I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
I'm using a new installed SAP GUI 7.3 .
The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
Thank you.

Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

Validation user exit at asset master data

hi all,
at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
Regards,
Rob

Hope the below user exits are useful:
AAPM0001 |Integration of asset accounting and plant maintenance
AINT0001 |Extended checks when posting an asset
AIST0002 |Customer fields in asset master
Pls assign points as wa to say thanks

Asset master data synchronization with HR Master data

Dear Experts:
I am FI consultant and i am doing Research on Synchronization of asset master data with HR master data. Our management wants that if company gives any thing which is regarded as an asset e.g Laptop, expensive tools e.t.c to its employee then beside opening its asset master data in FI it should also be updated in HR Employee master data. For this from FI side there are 3 asset classes for which we want that if any asset is opened in these classes then the data should be updated in HR. I have turned on Personnel number in screen layouts and have fetched this field in asset reports. We want
1...Asset Description
2...Cost Center
to be updated in HR master data. Now my question is that how this can be achieved. Is it possible? What configuration will need to be done for it.
Regards

Hi
FOr assets created in FI and reflect them in HR use the feature ANLAC and it will take care.
This feature determines whether or not the system checks the fields Asset number in infotype 0040 (Internal Control) and Loan object number in infotype 0040 (Objects on Loan) against database ANLA.
R K

Deactivation of dep area in asset master data

Similar Messages

Maybe you are looking for