Dead iPad 1 crashed when installing iOS 5.1

Hi
My iPad 1 64 /3G which has all the regular crashing abilities discussed on this forum has finally died
It crashed whilst installing iOS 5.1
It will not restart , the battery is showing critical low level despite 24hrs of charging
Can any body help ?  I have tried holding both buttons several times, it starts then shuts down after showing the low battery symbol, despite being on its proper power mains supply
Does not respond at all when connected to iTunes.

I had the same problem and was ready to throw It in the trash. Last night I erased my iPad and set it up as new iPad instead of restoring. I didn't turn on iCloud until after I deleted my iCloud backup and turned off contact syncing with it. Since then it hasn't crashed and it has had about 4 hours of use. 5.0.1 didn't have an effect on it. Just happy I got my iPad back!

Similar Messages

  • Since backing up my iPad air and installing IOS 8.1.2 the screen doesn't move between landscape or portrait when I turn it. Any tips for getting it to do so?

    Since backing up my iPad air and installing IOS 8.1.2 the screen only shows the portrait view and won't change to landscape view when I turn the device. Any tips for getting back both views?

    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that didn't work, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

  • My ipad crashes when i try to sync?

    my ipad crashes when i try to sync?

    What do you mean by "crash"? A little more specific information would be helpful.

  • Is anybody else experiencing crashes when installing iTunes for Windows?

    Is anybody else experiencing crashes when installing iTunes for Windows?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box (similar to those given above) are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Crash when installing Oracle9i on Windows

    If you have a crash when installing oracle9i on Win 2000
    (for example The instruction at "0x77fca30c" referenced memory blah blah blah), the problem could be your classpath.
    Try the following in a command window:
    cd Disk1 (or wherever you have unzipped oracle)
    set CLASSPATH=
    setup
    I guess it is a bug in the installer. I didn't try to isolate it, my classpath is too big!

    I just checked this again, at work, on my 2000 machine. I changed my locale to saudia arabia and that resulted in the alignment you mentioned earlier. I switched it back to its default english - united states and the alignment is no loner at the right.
    In addition to that my nls_lang setting is :
    AMERICAN_AMERICA.WE8MSWIN1252
    Note though, that simply changing the locale did it for me, regardless of my nls_lang setting.

  • Crash when installed on system that formerly had Pinnacle hardware

    Encore 2.0 (but not 1.5) consistantly crashes when installed on a
    system which has the RALcodec codec installed (My system is a dual 2.8 Ghz Xeon Dell under Windows XP SP2). This codec is installed by a variety of Pinnacle hardware installations such as the DC-1000 and DC-2000. It remains active on the system even after removal of these devices. The symptom is an Application Error after about 20 minutes and the usual offer to send info to Microsoft, even if Encore is simply opened and a empty project created.
    The solution is to rename the Ralcodec and associated files:
    Cachex.dll
    FXlib.dll
    MedMan.dll
    MLPagAX.dll
    RALCodec.dll
    RALCtrl.cpl
    RALMain.dll
    from the C:\Windows\system32 directory, reboot and then delete them.
    Of course your DC-2000 won't work anymore but that is probably not
    an issue.
    Some other details in case anyone cares: The Pinnacle software
    is loaded by Encore because Encore enumerates all installed
    codecs. When loaded, the Pinnacle software
    creates a hidden window called AudioInputWnd and then listens
    for various Windows messages on this window. This processing
    goes on in the background while Encore is running and eventually
    results in the app crash. Note that 3 years ago, when using
    Premiere 6.5 with the Pinnacle DC-2000 I used to get occasional
    crashes when exiting Premiere. The error message displayed at
    that time referenced AudioInputWnd as well. So it appears
    that even back then, with Premiere 6.5, there was a problem with the Pinnacle software.
    The crash of Encore 2.0 doesn't produce a message explicitly
    referencing AutioInputWnd but under Windbg you can
    see that the software is dispatching a message received from that
    window's queue. When RALcodec is removed, the AudioInputWnd
    is not even created anymore when Encore is run.
    I would note that Adobe support was unable to solve this problem and
    suggested the usual unhelpful littany of reinstallation of Encore and
    to update the video drivers when I first called it in 3 months ago. Another person, Dave Shriver also reported essentially identical problems in the Encore forum back in Februrary. The root cause appears to have actually existed in the Adobe certified bundle of Premiere 6.0/6.5 with the DC-2000 before resurfacing in the present form with Encore 2.0.

    The simplest way to reinstall iPhoto and iMovie is to download Pacifist and then extract the relevant applications from the Software Restore Discs.
    Pacifist comes with instructions; this is not a difficult operation and there is no need for erase & install to recover the applications.
    Pacifist is Shareware, but you need not pay the fee in order to use it. Every time that you open Pacifist you will be prompted to purchase a licence. If you feel that Pacifist is worth the money (and I think that it is), you can purchase a licence at any stage.
    If you're a plonker like me, then purchasing a licence will provide justification for third party developers like CharlesSoft to save the day for the rest of us.
    Good luck!

  • I declined iCloud when installing ios 6 on my iPhone 4S. How can I change my mind now?

    When installing ios 6 on my iPhone 4S, I was having problems with my password for iCloud. So I declined to activate iCloud (and Facebook, and Twitter, and FaceTime), thinking that I would be able to activate later. But I do not find any way of going back. How can it be done?
    Thanks.
    Alain F

    Do you have an iCloud account established? If not, go to www.icloud.com and create an account for yourself then go back to your phone and try again.

  • IPad crashes when viewing pictures

    Why does iPad crash when I look at any websites with pictures, Facebook, etc?

    Hi ThomasPhillips,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in the iPad assistant helpful:
    https://www.apple.com/support/ipad/assistant/
    Regards,
    Jeremy

  • How you close an application on ipad 4 after installing ios 7

    How you close an application on ipad 4 after installing ios 7

    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.

  • My ipad mini went in to recovery mode, when installing ios 8 HELP!!

    I was trying to install ios 8 when my ipad mini went in to recovery mode. please help!!

    Hey Foxamy31,
    Thanks for the question. It sounds like your iPhone is in recovery mode, meaning you’ll need to restore it with iTunes. If you previously synced/backed up with iTunes or iCloud, you might be able to restore from your backup:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • Since i uploaded ios 5 my ipad crashes when i use apps and safari.

    Hi,
    since i uploaded my ipad to ios 5 it crashes when i use apps and safari.
    i tried to restat it and also i reset it to the factory settings but nothing has changed.
    is there any software problems ??

    seems if I disable all security it works. Not a very good situation, tells me it's a port that is open that shouldn't be. I imagine it is fine on a mac, but on a pc it is an issue since most corporations use pc's.

  • Ipad is dead after attempting to install ios 6.1

    Disaster! My Ipad crashed during the installation of IOS 6.1. The recocery mode in iTunes doesn't work ! . When Iuse the recover mode, it downloads an then again it says that the software needs to be repaired. It is a contunous loop, the ipad is completely worthless! What do I have to do???
    No jailbreak or whatever, a well maintained Ipad2

    Take a look at this.
    http://thehowto.wikidot.com/ipad-stuck-recovery-mode

  • IPad apps crash after installing iOS 4.2

    After i installed iOS 4.2 almost any app crashes after a few minutes to the home screen and changes arent saved yet. Some apps handle it a bit longer, some crash right after a minute or so.
    Any idea why or what to do?

    Try the recommendations on page 170:
    http://support.apple.com/manuals/#ipad

  • Pictures in Photo Library or Online are crashed after installing iOS 8

    Hi
    Im using iPhone 5 and a few days ago I update it to be iOS 8, what happened is that images were crashed when I zoom pictures in photo library or even searching picture online. But in the evening it was okay again until now. I don't know what happening with my phone.
    Thanks for reading my issues and I'm very glad to get a response of the idea of this problem.

    Thanks for your reply King_Penguin
    Re your first point - 'Sync collections' was ticked in both the iPad and Mac versions of iBooks prior to these problems occurring.
    Why have recently purchased or installed books been moved to iCloud and moved off my iPad and iMac when previously they were there in my iBooks library collections? They were books I'd read or were in the process of reading.
    More confusing is that on my Mac in iBooks there are books that are fully downloaded and not in iCloud yet the same books in iBooks on the iPad are not downloaded and are in iCloud. After I sync this hasn't changed. To my mind this means that sync isn't working properly or that maybe iCloud has somehow been activated on one device and not on the other?
    Why should I have to re-download books that were already present in my iBooks library on Mac and iPad prior to my upgrades to Yosemite, iOS 8 and the iBooks  apps?
    I have to reiterate that I do not and will not use iCloud and for 2 reasons: it is not secure and Apple uses push marketing to make it difficult for you to not use it.

  • Reader for iPad crashes when highlighting

    My iPad Adobe Reader keeps crashing when trying to highlight text. It seems if it takes me more than three or four seconds to tap, hold, and swipe the text I want to highlight then the application closes unexpectedly and I lose some of the work I had completed.
    Is anyone else having this problem?  My Reader version is 10.4.4 (70670). My iPad is the New Retina display model with IOS 6.0.1.

    Thanks for sharing the information. But unfortunately, we are not able to reproduce this issue at our end.
    Could you please share the Crash logs with us that will help in investigating the issue. Follow these steps:
    Sync your iPad to iTunes
    Find the crash log(s) on your computer.  Here is where they¹re located:
    Mac OS X : ~/Library/Logs/CrashReporter/MobileDevice/<DEVICE_NAME>
    Windows XP: C:\Documents and Settings\<USERNAME>\Application Data\Apple computer\Logs\CrashReporter/<DEVICE_NAME>
    Windows Vista & Windows 7: C:\Users\<USERNAME>\AppData\Roaming\Apple computer\Logs\CrashReporter/MobileDevice/<DEVICE_NAME>
    The log files' names start with the application name and have the extension ³crash²
    Attach the crash log file in an email and send it back to us @ [email protected]
    Thanks,
    Ankit
    Adobe Reader Team

Maybe you are looking for

  • I can't drag and drop my songs from mp3 rocket to my iphone?

    i have my mp3 rocket account linked to my itunes account and some songs get put onto my phone, but some dont. i can't drag and drop and if i try to rename it with correct characters, nothing happens. the mp3 rocket folder is in music under shared lib

  • Garageband into iMovie

    Hello everyone What I am wanting to do is record a video of myself, using iMovie and the iSight camera, playing a piece of music on my guitar. However, I have my guitar plugged thru a firewire interface into Garageband. So, what i am hearing is the g

  • Changing Material Number ON BAPI_REQUISITION_CHANGE!!!

    Dear Gurus, On BAPI_REQUISITION_CHANGE there is parameter name REQUISITION_ITEMS_OLD, on this parameter there was no item MATERIAL. I want to change this material when doing update (change). How could this BAPI doesn't support MATERIAL when doing upd

  • Change the content in Benefits participation area

    HI, In the benefits participation area under show benefits general links. There is some text. I want to change the text. I did not find the text in home page frame work service. How can I change the text to some other.  Is it comes from Web Dynpro or

  • Color Labels in Photoshop

    Does anyone know if there is a way to change color labels WITHIN photoshop? i do NOT mean labelling a layer or group. I mean labelling a FILE within psd that can be read in Bridge/Lightroom. I know I can tag them there, but I would like to be able to