Dead ipod. did all the troubleshooting no help. any ideas?
had trouble syncing a movie. did all the troubleshooting and no help. thought maybe if i restored ipod it would help. now when its almost done i get another error message (9). did all the troubleshooting with that and now stuck with an ipod thats screen looks like i took it straight out of box asking me to connect to itunes. is this a pc problem or apple problem. any ideas would help!
yea the only thing the screen shows is the itunes symbol with a charger connected to it.
Similar Messages
-
Hanging after installing avast andspy doctor did all the troubleshooting
I have updated Firefox and all plug-ins. Installed Avast and spy doctor now having all sorts of hang ups. did all the troubleshooting to no avail.
johnodd4, I appreciate your time and thanks for responding.
I'm so frustrated as I'm dealing with multiple issues here.
Here's the RAM purchased:
512MB Apple iMac/iBook/PowerBook PC133 1" SDRAM SODIMM (p/n MX-M8631G/A) $89.98
I'm concerned that the RAM received doesn't look like the RAM module advertised and when I google the SKU number I'm taken to an ASUS notebook page on MemoryTens own website. So I don't even know if the wrong RAM was accidentally sent out.
MemoryTen Support ask me to check the RAM is seated properly. Well it was and installing that new RAM has caused to iBook to display the Flashing Folder/?.
The iBook still failed to boot when I replaced the original Apple Ram module AND when I removed that and tried booting with just the onboard 64mb RAM, the boot process didn't proceed past the Flashing Folder/?.
So ... the RAM is going back to MemX BUT I still have this iBook that was working perfectly before but now is very very sick!
I have zeroed the HD using Disc Utility/Target Disc Mode and when I place the Panther disc in the tray and hold the Option key at startup, then select the Panther Disc and click on the forward arrow ... it just hangs for hours (actually I gave up after 3hrs).
I have to reset the PMU everytime I want to boot up and try something new.
I've been frantically researching this and I only have the Panther disc (Retail Version) which was bought recently and used to successfully upgrade to OS from 9.2.2 to 10.3.9 (and I did apply the 4.1.7 Firmware Upgrade)
Message was edited by: Spawn_Dl3y -
After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?
A not uncommon problem. See this previous discussion.
Problems with IOS 5 Music App (Updated) -
I bought a Windows 8 computer and took my old hard drive from my Vista computer and made it external.Previously
I used Appleworks 6.0 to make drawing documents.I really would like to be able to use Appleworks 6.0 but the Windows compatibility troubleshooter
was not able to fix the problem(tried all modes). Do not have original Appleworks disk to reinstall as it was originally downloaded and cannot access
site anymore. Any suggestions would be greatly appreciated!The OP said: "Any suggestions would be greatly appreciated!"
Maybe I misread this:
PantherCCG wrote:
Yes, I will try to locate an older Mac to open the files. It should work as long as it has
Appleworks 6.0.Otherwise it will not open the files.
Just showing him an option on a newer mac, which last time I checked, is easier to find than an older Mac.
Depends upon how important it is for him to open these files... -
I appreciate any help on this..very frustrating listening to Led Zep album and another groups song is listed in the album. If I look at the album in itunes all albums look perfectly correct.
I feel your pain! I have the same exact problem. Have you gotten a solution yet?
-
my headphone jack no longer works. I just upgraded software and did all the iCloud install. Any ideas?
It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you. -
Hi. My Ipod Touch switched off in the gym during exercise (got wet or battery wend down). I tried all the troubleshooting hints but nothing helps. It is not responding, not charging and is completely dead. I tried various charging from different sourches but nothing happens.
Any advice please?If you tried everythng here then it is time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.
iOS: Not responding or does not turn on -
I can't get Itunes to communicate with my 3rd gen Nano - I've reinstalled iTunes several times but still get the same error message for both mine and my wife's ipod - same version of 3rd gen. All the troubleshooting guide has been followed but still not connecting.
Any ideas?Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok. -
My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???
I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order. -
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
My three year old ipod nano 4th generation has been working fine all these years. Suddenly, last week, while it was low on battery (not completely drained), it shut down and I cannot restart it. I have tried all the troubleshooting issues and still did not manage to turn it on. Though. when I press center and menu while connected to my computer, the computer bips has if it recognized that something is trying to connect. Though, it cannot identify it and the iPod remains shut down. I cannot find the issue, perhaps I need a battery replacement?
acwiz wrote:
My three year old ipod nano 4th generation I cannot find the issue, perhaps I need a battery replacement?
It's possible. Just take the iPod to an Apple store or an AASP. Whichever is more convenient for you. -
I have tried all the troubleshooting tips online but my Classic ipod doesnt work. My Itunes keeps telling me that it cannot restore the ipod because the ipod is busy. What can I do?
Have you tried rebooting for the Mac and iPod to see if that helps? To reset the iPod, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
It wouldn't hurt to also try plugging the iPod into another USB port and use a different USB sync cable.
B-rock -
I cannot sync my iPad or iPhone to iTunes on my Windows 8 PC, even though I have been doing this successfully for years. I have been through all the troubleshooting steps I can find in iTunes, to no avail. Help please?
I seem to be having the same problem on my Windows 8 laptop... I am able to update my iPod Nano through iTunes but my iPhone is not recognized as a device in iTunes. Have been able to update my iPad until recently. Is this a bug fix that Apple can help with? I'd rather not uninstall all my Apple programs if I can avoid it...
-
I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??
Hello:
Try resetting the PRAM and SMC.
Barry
Maybe you are looking for
-
Is there a way to hide the project name in the "Big SMPTE/Bar Displays"?
Is there a preference I can't find? I understand why these are useful at the top of the big windows, but most of the time I'm trying to squeeze these meters at the bottom of the page, and these headers just make them harder to find a place for. Also,
-
How to make applescript to select every 3rd file to move to new folder?
I have an interesting 'problem' I think. As a result of a time-lapse experminent, I have a folder which holds several thousands of pictures from a fixed point, made over several days & nights. But there is one issue: the camera made 3 different expos
-
Alphabetizing xml filled dynamic textfields
So I am looking to alphabetize dynamically created textfield created using a for each loop and XML. How would I go about this, I searched around and there isn't much about this, and now I feel like I haven't the slightest clue. The one post I found i
-
Having some dificulties with creating the configuration file for the Tacacs4.0.4. I have my test switch authenticating and authorizing, but am not able to figure out how to get the admins group to login directly to the privileged exec mode. Also when
-
Mission control "Middle mouse button" shortcut conflict?
I am trying to set the preference shortcut for mission control to Middle Mouse Button. When doing so I get a yellow triangle that says "This mouse button settings conflicts with the settings for another mouse button". The shortcut still works even wi