Dead pixel and something stuck between glass and LCD

Just got a new Apple Thunderbolt Display (27-inch). As you can see from the photo below there is one dead pixel and some material stuck (that move around a little when you press the screen).
Apple will replace this if I take it back won't they?

You can exchange for a new one (that is what I did). However, using suction cups you can remove the glass screen for cleaning( only held on with magnets). Of course that will not solve the pixel being out which is unusual for TBD.

Similar Messages

My phone is stuck between off and on. It has a white, slash circle going around and around. The button on top doesn't seem to do any good. The phone is only 31 days old. Please write back, I can't use it to even call in an emergency. Thank you

My phone is stuck between off and on. It has a white, slash circle going around and around. The button on top doesn't seem to do any good. The phone is only 31 days old. Please write back, I can't use it to even call in an emergency. Thank you

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Gap on the top between glass and alu frame?

Is it normal if my 3 week iphone 5 has small gap on the top between glass and alu frame? Is it covered with waranty?

I send my iphone on t-mobile repair service and they didn't change my iphone, so they said that i need to contact apple and wait if they approve changing for new iphone, so please tell me how to contact apple support and send them this image below, sorry for my bad english.

Is this a dead piXel or something wrong?

Hi, today i was working with illustrator and i found this, i don't know what can it be but i think nothing good! is it a dead pixel or something? do i need to take my MBP to the service center?
http://i29.photobucket.com/albums/c278/inetz/DSC02473.jpg
http://i29.photobucket.com/albums/c278/inetz/DSC02472.jpg
http://i29.photobucket.com/albums/c278/inetz/DSC02471.jpg
Cheers!

If you are looking on a different page is the mark always in the same place? If so it could be a dead pixel.
If you took it in I don’t think they will do much about it, as I think 1, 2 or 3 dead pixels are probably within the tolerances allowed for that screen.
You can always take it in to see what they say.

Separate document no. for SD revision document and detagging relationship between invoice and SD document no.

HI,
Country specific settings for India - Business transactions enables SD revision vide table TE872_SDCTRL_IND.
Whenever SD revision takes place system issue similar document no. as that of invoice and tagged it with XBLNR as per standard process.
Now issue that if that invoice is reversed, subsequent SD also gets reversed.
So business requires to have separate document no. for SD revision document and detagged relationship between invoice and SD document no.
I have explored event R507, 0010, 0060 and R436 but couldn't find input structure where such separate document can be assigned.
So can you provide hint which can assist in issue resolution?
Regards,
Paresh

Check this thread, if this helps.
[url] Link between MKPF table and EKKO or RBKP table [url]
I've done this as well earlier to create a custom document flow for archived documents where from the EBELN i've found all the related documents. Hope this helps.

Copy and paste styles between objects and entire slides

Hi,
In Keynote 5 I was able to copy and paste styles between objects and even between entire slides.
cmd+alt+c on one object (like a circle) and all its details like shadows, colors and animations could be transferred to another object.
One could even do it with entire slides and transfer one animation style to all the other slides.
THAT DOES NOT WORK ANYMORE.
Does anybody else miss these features?
Or is it just me?

object animations tools are:
copy animation:   Format > Copy Animation
paste animation   Format > Paste Animation
     there are no keyboard short commands for these.
There are no tools to copy or paste transitions between slides, you could duplicate the slide then add the content.

When i try to install the mac os x 10.7.3 i start up the computer and apple logo appears and it stucks why? and what should i do?

when i try to install the mac os x 10.7.3 i start up the computer and apple logo appears and it stucks why? and what should i do?

How are you trying to install Lion 10.7.3? Where did you get that version as the current download version is 10.7.4.
Why are you installing 10.7.3? What OS X version was on the computer before you started this install?

Report - quantity and value difference between delivery and invoice?

Hello experts,
My client use u201EProof of deliveryu201D t-code: VLPOD. There is always quantity and value difference between delivery and invoice.
Do you know any report which will show this differences between delivery and invoice?
Best regards,
Maciej

Hi,
Note 867678 - Proof of delivery (POD), delivery and billing document will help you to understand POD flow.
You have the tcode VLPODF/VLPODL/VLPODA, but perhaps they will not help you. So, as the before note suggests you, you can use the tables VBFA, LIKP, LIPS, VBRK, VBRP, TVPOD and TVPODG to do your own report.
I hope this helps you
Regard,
Eduardo

My sister got ios8 and something got meesed up and apple reset her phone and my ipod is set up with that email so i lost everything please help ill share details

my sister got ios8 and something got messed up and apple reset her iPhone and my ipod is set up with that email so I lost everything. details if u can help me thanks

This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

Dust, Debris In Between Glass and LCD

Hi,
A few months ago I purchased a Macbook Pro 13", it is not the newest revision with the nvidia320 graphics, its the older.
Anyways, just a couple days ago, I opened the computer and noticed two pieces of dust in between the glass and display right it the middle of course about two inches apart, they for sure are not dead or stuck pixels as I can get them to move just a tad if I give the screen a few good taps but I don't want to screw up anything, plus a few more specks have came and gone since this started (seemingly moving across the screen over a couple days) but the original two specks are still there it seems to be getting worse and I'm concerned by a month or two the screen is going to have dozens of these specs. I keep my screen and computer super clean, I'm a bit neurotic about that which is why it annoys me so much. I'm wondering if I have a leak i the seal around my screen or something.
Once you see these things you can't un-see them. To make matters worse, I haven't yet bought the applecare but it is still within the one year warranty, and its the old model so I don't know if they would even be able to replace it for me if they could as I'm sure they have started caring only the newest revision. Which would be a problem for me if they just opted to swap the whole thing since I got the faster 2.53 model and not the base, and from the looks of it the newer model only comes in 2.4ghz and 2.66 respectively.
TL;DR, I have an appointment at an Apple Store tomorrow to have them check it out but I don't know if they are going to want me to pay to replace the screen or what, since I don't have apple care but I'm still under 1 year warranty? I'm curious if anyone else has been in a similar situation. This seems likes its a manufacturers defect and not anything I could have caused. It already seemed like I was pulling their teeth when I got my Macbook Pro originally it had several dead pixels and I was able to get them to swap it out so I'm wondering what kind of freak their going to think I am when I show them these pieces of dust lol. But man are they annoying, has anyone else went through this on a model over two weeks old?
images if you wish to look
http://i160.photobucket.com/albums/t169/coryperemsky/macu/e3d7202d.jpg
http://i160.photobucket.com/albums/t169/coryperemsky/macu/c1a3b6e5.jpg
Message was edited by: M0bius1

Hello,
After reading the post and review the pictures I think I have the same problem.
I bought a MacBook Pro 13" in December 2009 (still under warranty) through Apple Store and I noticed what I thought was a dead pixel. Looking better, even with the screen off, there is something in the sector. I took it to an Apple service and said it was a speck of dust behind the glass. I made the request to repair to Apple Care and have not had a response succesfull.
Would greatly appreciate any suggestions from you guys.
Greetings.
Here are some pictures:
http://img843.imageshack.us/img843/8144/7sinbrillooblicualcdcri.jpg
http://img197.imageshack.us/img197/4059/6pantallaapagadaoblicua.jpg
http://img20.imageshack.us/img20/5391/5pantallaapagadafrente.jpg
http://img689.imageshack.us/img689/9932/4conbrillofrente2.jpg
http://img535.imageshack.us/img535/4333/3conbrillofrente1.jpg
Message was edited by: Jorge Castillo S.

How to remove water from between glass and lcd

I took my phone into repair a few weeks back and probably got non OEM parts. Now after having my phone near the pool for a couple of swims, I've got water stuck between the glass and LCD. The phone works fine. Just lots of spots on the screen. Best way to dry out? Rice? Take it apart? Open to some suggestions. Thanks.

Put in a bowl covered by uncooked rice on a radiator or heated floor for min 48hours

Seal Between Glass And Chrome Is Peeling Back...

I noticed this morning as I was keeping my iPhone nice and shiny with the provided cleaning cloth that the rubber seal between the glass and the chrome accent is slightly starting to peel back on the bottom left corner...
It's only minor right now but if you gently run your finger over the imperfection the rubber shifts out of place every time...It's an issue that I think will only worsen with time I'm sure...Not to mention the imperfection is aesthetically unpleasing now that I've noticed it...
Is this something that the Apple Store would be willing to fix/replace under warranty and has anyone else had this issue?
Thanks!

Outfitting your phone with a case should not be a solution. As much as I respect peoples decision to use a case; iphone, ipod, I find it funny to hear them talk about how beautiful the ipod is yet their player looks like <edited by host>. I mean, you don't see BMW drivers driving around with car covers, do you? You lose the aesthetic beauty of the product. Just a personal observation. Peace.

Line of "dead pixels" on the screen that come and go.

I just did a clean erase and install, i'm using leopard with all the current updates. i noticed the system was leaving lines on the screen before the fresh install so i figured it was a software problem. well, after doing a clean install they are back. its like the video isn't processing correctly or something because i can put another window on top of the "dead pixels" and it covers them up, like the in this picture. http://farm4.static.flickr.com/3269/2442796153fb66961090o.png
the finder window is covering an inch or so over the dead pixels. and to clarify the line of dead pixels or what ever they are appear to associate with a certain window or app and show up at different parts of the screen. for instance, if i see the lines in firefox, i can minimize the window and the line is gone.
this is on a 24inch white imac with the 2.16 c2d.
any ideas what would make this happen?
Message was edited by: DagYo!

There are quite a few posts about this sort of thing.
Many peopel find some minutes to hours after the lines of pixels the Mac freezes - mouse still moves but you can't do anything.
It's not clear if it's software or hardware.
My suspicion is that it's a software problem but I may be wrong. Either graphics memory or RAM used for buffering is faulty, or something is inadvertently writing garbage to graphics memory.
Most people attribute the issue to Leopard, but I'm still running Tiger.
Lots of posts about it being an nVidia card driver issue, but I'm running ATI.
Maybe coincidence but my 20" late 2006 iMac started playing up after a security update earlier this year.
Some people have had graphics cards replaced and it's cured it, pointing at hardware.
Another thing that seems to help is upping default fan speed using say smcFanControl.
Two things that have made this less frequent for me are:
- turning off Genie effect in Sytem Prefeerences for minimising/maximising windows (I often got freezes when changing windows)
- running smcFanControl
There is some debate as to whether or not for some reason the fans are not speeding up properly (software/EFI or SMC problem?) in response to higher temps and hence components are becoming unstable.
Try some searches on 'glitches' or 'freezing' or browse through the last couple of weeks threads.
If your machine is under warranty I'd be phoning Apple. Mine alas is not.
AC

Dead pixels on Macbook Pro Retina Display and keyboard scratches.

Since the purchase of my Macbook Pro with Retina Displey 15" early February 2013 it has gained 5 dead pixels on the screen. If I take it to the Apple Store are they going to tell me it's my own fault and not help?
I also found a scratch on the <H> key on the keyboard, which has removed a little bit of the black coating, allowing the backlight to shine through. Does anyone know of a solution to this, or if apple are able to help? I have already tried writing over it in black sharpie pen, but it doesn't help.

Apple has some system they go by to determine how many dead pixels are 'acceptable' on a display - it's not your fault.
You may be able to get a replacement key from -> https://www.replacementlaptopkeys.com/. Since Apple will probably say it was caused by user damage, you'll have to pony up the $5 for the key.
Clinton

Xperia z3 D6603 concern over gaps between glass and frame.

Hello,
I recently upgraded my ion to z3. And there is no doubt that it's an amazing phone.
But I have some concerns regarding the small gaps between glass panel and metal frame. It gets dust and more over that I am worried about its waterproofing. I want to know is it normal for all z3 out there or is it just me? What if it can't handle water in this regard?
There are some pictures.
Solved!
Go to Solution.

This subject has been mentioned many times before, from the Z all the way thru the models up to the Z3.......you have to have some uniform gap between the panels & the bezel...this is to allow some form of expansion due to temp changes, if you think about it.......if it was packed tight & the phone heats up the expansion would have nowhere to go resulting in damage. The gaps do not mean that you have a waterproof issue either.....
Hope this helps

Dead pixel and something stuck between glass and LCD

Similar Messages

Maybe you are looking for