Dead screen, looking for screen sh

I have a Zen Xtra with a dead screen. The backlighting works, but I do not get any text on the screen. Everything else works. What I am looking for is screen shots that will take me step by step throuh the different screens, ie, to pick an artist I press menu (pick of what screen looks like), press select button once, get this screen (pic of screen), press select button down twice to get to artist (screen shot) etc. I have an idea, through trial and error how to play some music, but need to know how to get to albums, artists, play all, and play mode. Any help is appreciated. Thanks.

Since many have viewed this (But no one has replied), I will reply to myself. I took the MacBook Pro to the apple store.  They took out the battery, which was working fine by the diagnostic, and found that somehow, the traChpad had tightened itself in terms of sensitivity.  They adjusted the trackpad sensitivity, buttoned it back up, worked like new, no charge!!!  If you experience this problem, take it to the apple store, let them adjust the track bar, you'll be off and running in 15 minutes...

Similar Messages

  • Changing screen size for screen sharing

    Is there a way to change the screen size for screen sharing?
    I have a 13" macbook and a G5 with a 20" monitor. When I use RDC to a PC it automatically adjusts to use the full screen on the G5 and when I use VNC to a linux system I can create a vncserver with any arbitrary geometry that I want, but when I use screen sharing all I seem to be able to get is a 13" screen. I can use JollysFast VNC, and view it full-screen, but it's still just 1280x800.
    So, is there anyway to create a virtual window so that I can take better advantage the screen on my G5 when screen sharing to my macbook?
    Thanks,
    Rob

    Well, the question should really have been, "What is the ideal page width for the iPad?".
    The answer is that there isn't one since the iPad, like most portable devices, has two screen widths depending on whether its used in portrait or landscape mode.
    If you are designing a layout specifically for the iPad, one solution is to use a folding design where the sidebar folds down to the bottom in portrait and jumps back up to the side in landscape. This will only work for personal computers and iPads.
    The popular way of designing a layout to suit a large range of portable devices is to use a liquid, or semi liquid, layout that will automatically adjust to the fixed width browsers used on these devices.
    Something like this...
    Neither of these methods are possible using a template based editor like iWeb and this is probably one of the main reasons that Apple has given up on the application. Surfing the internet on mobile devices is growing daily and its now become essential to have a mobile version of your website or one that can be viewed on all devices.

  • Looking for Screen Protector for A5500-H / A8-50

    I'm looking for a good but reasonably priced screen protector for my Mum's new A5500-H. I know there's loads of cheap ones on e-bay but I've tried them for other devices before and found they don't apply very well or have a nasty rough surface that your finger sticks to, making the device unpleasant to use. I've got the model with two speakers, so need cutouts for them at each end. Generally I think the Matte protectors are better as they cut down on reflections, even if they do make the screen a bit less clear/sharp.
    I really want a pack of at least two, in case I mess up applying the first one or just as a spare for future. This one's cheap enough to buy two but I've not come across kwmobile before, so they might not be any better than the e-bay ones.
    http://www.amazon.co.uk/kwmobile%C2%AE-protector-ANTI-GLARE-resistant-against/dp/B00KPX8DE2/ref=pd_s...
    This on the other hand is quite expensive at £11.69 for two but I think I at least recognise the brand, although there's only one review so not enough information to know if they're actually any good
    http://www.amazon.co.uk/atFoliX-Screen-Protection-Lenovo-IdeaTab/dp/B00JKOWAUA/ref=sr_1_8?ie=UTF8&qi...
    I was hoping to find something decent around £4 or £8 for two.
    Xtremeguard I think are OK and this seems like a good price for three but coming from the US I'll have no recourse if it turns out to be rubbish as it will cost more to send it back than it's worth
    http://www.ebay.co.uk/itm/3-Pack-Clear-HD-XtremeGuard-HI-DEF-Screen-Protector-Cover-For-Lenovo-A8-50...
    The fact that they're selling this single one for more than that pack of 3, makes me concerned that the latter might not be very good
    http://www.ebay.co.uk/itm/Genuine-XtremeGuard-LCD-Screen-Protector-For-Lenovo-A8-50-A5500-Anti-Scrat...
    Perhaps there's a decent but reasonably cheap option for a different 8" device that I could cut down so that it just covers the actual screen area?

    Hmm, I notice that the cheaper Xtremeguard 3-pack says they have a "slightly grippy feel" which sounds like the nasty ones I've used before on other devices. The more expensive Xtremeguard single protector has to be applied with water, which I don't fancy either, so I'm still looking for suggestions.

  • Looking for screen to change Supplier User Registr.. workflow process name

    Hi,
    The question relates to Supplier User Management.
    Does anybody know if there is a page where you can pickup the workflow (the shipped one has internal name POS_REG) process name for supplier registration?
    Thank you.
    Anatoliy

    Hi Bala
    What enhancements were you adding to the Workflow Reassign/Delegate feature, which included being able to add comments? A good idea is to look for any differences between how workflow implements the reassign feature, and your customization.
    Also, make sure you only use the Public documented PL/SQL APIs and do not update the tables directly to ensure no Support or Upgrade Issues.
    Cheers
    Mark
    I am using Stand alone Workflow 2.6, In my workflow process
    which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
    For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
    Here user can pick other user, and add comment,
    once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
    In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
    in workflow process which will call CHANGE_OWNER.CREATE, here
    the workflow process supposed to wait and get the User to be
    changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
    SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
    WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
    FOR THE USER INPUT.
    HOW TO DO IT.
    Thanks
    Bala.

  • Screen shot for screen painter..

    hi.. can anyone give me screen shots or kink for screen painter using module pool programing..

    Hi,
    Check this link for STEP-BY-STEP DEMO FOR SCREEN PAINTER with screen shots
    http://abapliveinfo.blogspot.com/2007/12/working-with-screen-painter-in-sap.html
    Check this link for Screen Painter Concepts http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801c54454211d189710000e8322d00/frameset.htm
    http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/MENU&SCREEN_Painter_tutorial.html
    http://abap-gallery.blogspot.com/2007/08/screen-painter.html
    http://www.thespot4sap.com/articles/SAP_Design_Screen_Elements.asp
    Reward points if useful....
    Regards
    AK

  • Selection screen option for Screen type like inDEMO_SEL_SCREEN_AS_SUBSCREEN

    hello,
    in this program there are 2 selection screens,called from MAIN screen.
    DEMO_SEL_SCREEN_AS_SUBSCREEN
    i want to create similar..
    In main screen i will have 3  screens (which should have of screen type 'Selection screen ' ) and 1 BOX (in which I will have Table control)..
    I created the main screen 0100 and 3 sub screens..(1001,1002,1003)
    But when i want to create these I cannot choose Screen Type as 4 Selection screen (the other options are 1.normal 2.Subscreen 3 Modal dialog box)..
    I have gone through other threads..they simply say its not possible..
    then how was it done in DEMO_SEL_SCREEN_AS_SUBSCREEN..
    Also i have seen Zprograms with 3 sub screens as Selection screen ...
    Also interestingly the  short description of this screen is
    SEL_SCREEN 1100 INFO:140000140000000000000000000005490892784

    Hi,
    This code form teh same program creates them as selection screen.
    SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
    PARAMETERS: p1(10) TYPE c,
                p2(10) TYPE c,
                p3(10) TYPE c.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN END OF SCREEN 1100.
    SELECTION-SCREEN BEGIN OF SCREEN 1200 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-020.
    PARAMETERS: q1(10) TYPE c OBLIGATORY,
                q2(10) TYPE c OBLIGATORY,
                q3(10) TYPE c OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN END OF SCREEN 1200.
    check this out:
    [http://wiki.sdn.sap.com/wiki/display/ABAP/Select-OptionsinModulePoolProgramming]
    Edited by: sap_wiz on Jun 23, 2011 1:33 PM

  • Dead iMac, Looking for Options

    My girlfriends 2001 iMac G3 died, and it would not be too much of a problem if it were not for all the photos on her hard drive.
    I think i can get the hard drive out but I do not know if there is a specific size of hard drive enclose for the iMac's hard drive.
    Can anyone help me out with this?
    Also, is there any way I should store the hard drive after I take it out of the computer and before I put it in the enclosure.

    The iMac has standard IDE/ATA HD, so you can get almost any enclosure, and put it in there, and then recover your data. I like the Mercury Elite Pro enclosures from OWC found Here. One thing that you should look for when buying an enclosure if make sure it has the Oxford 911 chipset and not the more common - and less expensive Prolific chipset. The only think you should do whilst teh HD is out of the computer is to make sure it doesn't get wet and what not.

  • Field symbols - specifying screen number for screen field.

    Hi Experts,
    I am working on a field exit for T-Code FBD1. I am using the following code
    field-symbols : <fs>.
    assign ('(SAPMF05A)BKPF-BUKRS') to <fs>.
    My field exit works on screen 300 where as company code is on screen 106. This works fine as there is only one occurance of company code in the program SAPMF05A. There is another data element RF05A-NEWKO which is on both the screens. I want the value in the field on screen 0106. How do I specify the screen number?
    Regards,
    Abdullah

    Hi!
    You cannot specify the screen number in this case. The field symbol will be assigned with the current value in the field (SAPMF05A)RF05A-NEWKO, i.e. the value at runtime when the exit is triggered. Make sure your exit is trigerred when you move from one screen to the next.
    Cheers!

  • DV4-1125nr black screen on boot up looking for bios flash file taken off hp site or solution

    have black screen looking for sp41969.exe for dv4-1125nr to do blind flash.  on board diagnosis is 4 flashes (graphics controller malfunctioning) with amber sound and wireless lighting up by keypad not very good with computers so any help in dummy terms would be appreciated if you have the file i need please email to {Personal Information Removed} thanks

    HI,
    bmbrsoccer4 wrote:
    have black screen looking for sp41969.exe for dv4-1125nr to do blind flash.  on board diagnosis is 4 flashes (graphics controller malfunctioning) with amber sound and wireless lighting up by keypad not very good with computers so any help in dummy terms would be appreciated if you have the file i need please email to {Personal Information Removed} thanks
    Try the troubleshooting procedures on this HP web page.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Find screen number for enhancement.

    How to identify screen number for a particular standard SAP transaction for enhancement. Suppose I want to enhance any screen of any transaction how to search/identify customer screen number and enhance them, I want to add some fields or tab or anything else.

    Hi Avirat,
    You can get the screen number for screen enhancement using the following methods:
    1) Googling  on the Tcode or by reading OSS notes .
    2) Go to SPRO transaction . Navigate to the application component and see whether any section on Enhancement exists.
    3) Other ways of finding it are -
        i) CMOD based screen exits -
    Here the 4 digits 0101,0111,0201,0211,0301,0311  are the screen numbers where enhancement can be done .
    In case project is already implemented, get the project name from MODACT table.
    ii) For BADI based screen exit - Do a look up on SXS_SCRN table
    Regards,
    DPM

  • Best screen protector for iPhone 5?

    I need a good screen protector that protects against drops and scratches, since I recently got a new phone case which does not do good in protecting my phone, it's just for the looks. Any suggestions?

    The iSmooth Screen Protecto work great!
    http://www.amazon.com/gp/product/B0098ACVH8
    -Pros:
    perfect material (no glare, doesnt inhibit brightness, feels like bare screen)
    doesnt smudge easy, easy to clean.
    best value for the money, you get plenty of chances to mess up
    the Seller (smooth global) was absolutely amazing, they've sent multiple free packages and did everything they could to make sure i was satisfied.
    -Cons:
    difficult to apply (they are cut nearly perfectly to screen so alignment is crucial)
    like any other screen protector, they catch dust easily during application
    Overall:
    I would definitely recommend this product to anyone looking for screen protectors.
    Be sure to do business with Smooth Global whenever possible, they are great.
    Application tips:
    1. Take your time
    2. make sure screen is free of dust
    3. do in a room with little air movement
    4. practice aligning protector before you remove the sticker

  • How to print screen & recommendations for clipboard extenders?

    How do i print screen on my new iMac & can you recommend clipbaord extenders similar to the PC products Clipmate or SnagIt??
    As you can guess I'm a PC convert. Just got my new 24" iMac on the weekend and trying to get back to productivity. LOVE the product generally.
    TIA
    Barry

    Welcome to Apple Discussions!
    When you say print screen, do you mean screen capture to image, or print the contents of the screen?
    For screen capture, you can follow these directions:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh338.html
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh344.html
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1634.html
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh364.html
    A timed capture is avaialble with the Grab Utility found in your Applications folder. For many more screen capture functions, see this utility:
    http://www.ambrosiasw.com/utilities/snapzprox/
    Note: some content on the screen may be copyright, so be careful only to copy that which you have rights to do so.
    To print a Finder window directly to printer, there is this utility:
    http://searchwaresolutions.com/products/printwindow/
    For clipboard extention, see this utility:
    http://inventive.us/iClip/
    You may find others on http://www.macupdate.com/ or http://www.versiontracker.com/macosx/ which are more tuned in for your use.

  • EWM Screen Exit for /SCWM/MAT1

    Dear Experts,
    I need to add additional field to material master data on EWM/SCM box in transaction /SCWM/MAT1. Does anyone know what is the Enhancement for that or may be this is something new in SAP world?
    I've tried a program which finds enhancement for given transaction code and the ansver was "No Enhancement found", however when I've checked screen layout for screen 3000, function group /SAPAPO/MAT_MASTER, I found subscreen SA_MATLWH_CI where the frame was described as "Enhancement_Fields" which is not seen on the transaction now.
    Any Ideas ?
    Best Regards,
    Tomasz

    Did you find any solutions for adding fields to /SCWM/MAT1? I did't find any suitable screen exit or BADI to add fields to product master, 
    if you find any solution for adding fields to product master, Please post that information in that thread
    Thanks in advance

  • Looking for Bios for MSI 945P Platinum (MS-7176) Version 1.00

      Since the msi site doesn´t let me download the original bios of my motherboard, I was wondering if anyone knew how to download the original bios for this motherboard, or should I just make a backup of my current bios and that´s it? 

    Quote
    because my computer reports that it has version 6 since the last update last year
    There is no such thing as "version 6" for your board.  Whatever info your looking at that tells you something about "version 6" has most likely nothing to do with your actual BIOS Version.  Version 6 probably indicates the AWARD BIOS Code Base used for the BIOS (and if that is the case, it will be version 6 for all BIOS Releases for your board).
    On the Post Screen, look for the string "W7176IMS Vx.y".  The numbers that you will see in the place of X and Y indicate your current BIOS Version.
    Quote
    And suddenly it started acting weird lately.
    A BIOS does not suddenly become faulty and start acting weird.  If whatever problems you have started to occur only recently and not right after the BIOS Update, these are most probably not BIOS issues.  I strongly suggest to leave the BIOS alone for now (well, find out which version you currently have) and explain the weirdnesses you are facing in more detail.  Looks like they are caused by something else.  Please also provide full system specs. Read the >>Posting Guide<< first.
    Quote
    And yes, the liveupdate utility just doesn´t work
    Great. It should not be used for BIOS Update anyway because it tends to crash and thereby render systems useless.

  • When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

    When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

    Hey fantail163,
    If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for