Deadline + latest service packs = meh

I have an approval step for travel expenses with a 5-day modeled deadline that escalates the approval to the supervisor.  This has worked for a few months in production but since we migrated to the latest service pack release, the modeled outcome takes over but the original workitem doesn't get completed.  It stays active in the users inbox.
I have no idea why and running the deadline job again doesn't do anything.
It's going to the next step, just not completing the previous which is counter-intuitive to the whole workflow process.
The agent determination for the next step is getting an error but it worked before even when it did and for it to get to the next step to even check the agent determination it had to complete the previous...well you get the idea.
ECC 6.0
SAP_ABA        701       0005 SAPKA70105     Cross-Application Component

Hello,
Sounds like a bug, assuming nothing else has changed. Did/does it happen in the Test system as well?
"The agent determination for the next step is getting an error"
What sort of agent determination, what sort of error?
Also - which service pack?!
regards
Rick Bakker
Hanabi Technology

Similar Messages

  • Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

    Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS.  Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc.  Somethings not right. What the Heck ?

    See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
    Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

  • What is the latest service pack in pi 7.0?

    hi,
    may i know
    1. what is the latest service pack in pi 7.0 version ?
    2. what is the main difference in xi 3.0,pi 7.0,pi 7.1 versions?
    thanks in advance

    Latest patch details and its release notes information available at below link
    For XI 3.0..latest is SPS21
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
    For PI 7.0 latest patch is SP14
    http://help.sap.com/saphelp_nw70/helpdata/en/dc/369142f195675ee10000000a155106/frameset.htm
    Gaurav Jain
    Reward Points if answer is helpful

  • Crystal 11 - Latest Service Pack loaded - problem with Kyocera printer

    Post Author: sorrock
    CA Forum: Integrated Solutions
    Hi
    We are using Crystal 11 Report Writer, and Sage ACCPAC.  Since Upgrading our ACCPAC all the crystal reports that ACCPAC utilises are coming up as garbage on the preview screen.  I have ruled out a sage issue by opening crystal directly and opening the respective report, the garbage still appears, if I change the printer that it is set to then the report appears fine.
    The printer is a Kyocera  -  fs-c8026n   the driver is a Kyocera Mita extended Driver.
    Any other printer is fine - so I am looking for anyone who has had problems with a Kyocera printing garbage.
    I have loaded the latest service pack for Crystal.
    Can anyone please help - apologies if I have put this on the incorrect forum
    Thanks
    Stacey

    Hi Jim,
    You can upgrade to CR XI R2 for free by downlaoding the trial version, install using your XI keycode and then getting a keycode for XI R2 to enable all features.
    Or to upgrade XI only then install the latest service pack will bring you up to date.
    Thank you
    Don

  • Latest service pack for Process Control 2.5?

    Hi Gurus
    Can you please let me know what is the latest service pack available for Process Control 2.5?
    Regards
    James

    James,
    There is an SP05 for PC 2.5 and for the RTAs if you are using or plan to use automated controls.  The RTA service pack has to be installed on the target system.  Both SPs are downloaded separately.  The RTA SP version is dependent on the version of the backend system.
    Matt

  • Latest service pack for SRM

    Hi,
        Kindly let me know what is the latest service pack available for EBP. Is it service pack7. If anybody has documents for this service pack, please share.
    Thanking in advance.
    Thanks and Regards
    Manoj Upadhyay

    Hi,
    It's very difficult to know which released of SRM do you implement...
    So you could check yourself at :
    http://service.sap.com/patches
    Regards,
    Bertrand

  • Latest Service Pack for Primavera P6 v7

    Hi,
    Can somebody help me with the latest Service packs available for Primavera P6 v7. Also does they needs to be applied at both database and client level?
    Thanks in advance.

    Primavera Project Management P6 version 7.0 (P6 v7) Service Pack 3 [ID 1275307.1]
    You can try the below link but you will still need to sign into Oracle Support with a valid CSI #.
    https://updates.oracle.com/Orion/Services/download/p10622440_7000_Generic.zip?aru=13296827&patch_file=p10622440_7000_Generic.zip

  • Xsd:choice and how to download the latest service pack?

    Hello -
    When i import my XSD, the completed XSD doesn't import. Found that the xsd:choice is preventing the complete XSD to load.
    So i found that the from the Administration part of the Integration Builder the Software build has the SP-Number as 10 but when i look at the SPAM i find that latest service packs have been applied which is 0016.
    Does anyone know how and from where to download the latest service pack for my problem?
    Thanks in advance,
    Tirumal

    Hi,
    here is a list what XSD features are supported (as of SP11)
    https://websmp204.sap-ag.de/~sapdownload/011000358700000595422005D/XSDandWSDL_XI30SP11.xls
    (if this link does not work, go to service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) – Supported XML Schema and WSDL (EN))
    Td download the latest Support Pack, go do
    http://service.sap.com/swdc
    regards,
    Peter

  • JRockIt 7.0 latest service pack?

    Hi,
    Can someone tell me which is the latest service pack available for
    JRockIt 7.0?
    As far as I could look there is nothing higher than SP3 but the Weblogic
    Server certification page for Weblogic Server 7.0SP4 says that "WebLogic
    7.0 SP4 was certified with JRockit 7.0 SP4 (JDK 1.3.1) and will support
    any service pack of JRockit 7.0 (JDK 1.3.1) higher than SP4".
    We have some major issues and the machine just stops responding (network
    and console cannot be accessed, only the hardware reset is working)
    after a few hours of running the server under light load (20-30% of the
    CPU with just 3-4 clients) and has to be restarted.
    Thanks,
    Dejan

    Thanks,
    I found it myself and I canceled the original posting but the issue was
    that some of the links to it do not show SP4 and only show SP3.
    --dejan
    Stuart wrote:
    JRockit 7.0 SP4.
    http://commerce.bea.com/showallversions.jsp?family=WLJR
    "Deyan D. Bektchiev" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    Can someone tell me which is the latest service pack available for
    JRockIt 7.0?
    As far as I could look there is nothing higher than SP3 but the Weblogic
    Server certification page for Weblogic Server 7.0SP4 says that "WebLogic
    7.0 SP4 was certified with JRockit 7.0 SP4 (JDK 1.3.1) and will support
    any service pack of JRockit 7.0 (JDK 1.3.1) higher than SP4".
    We have some major issues and the machine just stops responding (network
    and console cannot be accessed, only the hardware reset is working)
    after a few hours of running the server under light load (20-30% of the
    CPU with just 3-4 clients) and has to be restarted.
    Thanks,
    Dejan

  • Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration

    Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration for CR2013; I have S userID  and log in; but could not locate the place to download

    Hi,
    I believe you are right!, The support portal is Showing Crystal Report for VS not the other one; 
    Our S User ID is out dated might be; It was created when CR 2008 was purchased. But we bought CR2011 license recently  as mentioned below.
    Below is the product purchased by our organization
    CR 2011 INTL UPGR WIN NUL LICENSE - 1 to 2 Licenses, mix and match.
    Does this version have maintenance rights?
    I tried registering at Service MarketPlace hoping to get new S-User ID; Am i right path to get the new S- USerID ?
    During registering it asked for "Customer or Installation Number (1) *" ; Where can i get this info or number; Kindly suggest

  • Latest service pack levels and maintenance updates

    I have searched around sun.com and cannot find the place where you can find the current service pack level and current maintenance update for Application server. Does anyone know where to find this information?
    Thanks in advance for your help!
    Jennifer

    Hi
    Check the latest versions of service packs and maintenance updates @ http://www.sun.com/download/index.jsp?cat=Application%20%26%20Integration%20Services&tab=3
    Thanks
    Srinivas

  • Where to find the latest Service Packs and Patches

    AccAD service packs can be downloaded from SAP Service Market Place (SMP), under 'Comprised Software Component Versions'
    The process for downloading the package is described below:
    1. Go to SAP Support Portal - [https://service.sap.com/swdc]
    2. Under Find your Software, see the 2nd bullet titled A-Z Index, and click on the link to Support Packages and Patches
    3. Click on the letter A
    4. Click on ACCEL. AD FOR SAP NETWEAVER
    5. Click on AAD 2.2 FOR SAP NETWEAVER
    6. Click on Comprised Software Component Versions
    7. Click on AAD APPL DELIVERY ENGINE 2.2
    8. Click on the OS version that matches your AccAD landscape
    9. Scroll down to the window and find the Downloads window.
    10. Look for the latest version by scrolling down further (internal scrollbar) and pay attention to the Last Changed date column.
    11. Click on the link to the TGZ package which will start the download
    Zeev

    Hi Stephan,
    I wanted to add onto Zeev's precise answer.
    First of all we appreciate your feedback, we will look into why the above mentioned links are not updated as expected.
    Regretfully our SDN page is a bit outdated and we are in the midst of updating it.
    Currently, AccAD 2.2 SP4 as available for download and has already been adopted by some of the main SAP customers and in addition by new customers.
    The release notes indicating the differences can be found as part of the installations but I hope to provide the 2.2 SP4 notes later this week - in a formal SDN announcement.
    Further more as for additional updates:
    - AccAD 2.3 is currently undergoing validation phase and is expected to enter Ramp Up phase in October of 2011.
    - AccAD 2.3 as with every version brings with it new capabilities and increased performance and quality as well as a more up-to-date PAM.
    - We are currently in the planning phase of the next AccAD version to begin development very soon and would be very happy to hear the feedback that you or any other of our customer base may have.  To do so, I encourage you to contact me directly - as i cannot post an email address here - my details can be found in my business card found in this forum.
    - We will be attending and presenting at SAP TechEd Las Vegas and TechEd Sapphire Madrid - we would be happy to meet up in case you will be present.
    All the Best,
    Smadar
    Edited by: Smadar Ludomirski on Sep 11, 2011 9:29 AM

  • Latest service pack or Patch for 5.2

    I am running Messaging Server 5.2 with the service pack 2 on solaris 8 02/02 (sparc). What is the latest/current patch or service pack that I should have?

    Hi,
    Please log a service request with SUN and request the bugfix list for the latest available iMS5.2 hotfix. This will list all the bugs fixed since iMS5.2RTM (the bug fixes are cumulative).
    Cheers,
    Shane.

  • WLE 5.1 latest Service Pack

    What is the current service pack level for WLE 5.1?
    Is this available for download anywhere?
    Thx.
    MacDuff

    WLE does not have the service pack model that WLS has. For WLE you need
    to contact BEA support to get the latest rolling patch for the WLE
    version you have. They will then point you at a site where you can pick
    up that specific kit for your platforms. It is not available as a
    web-site download.
    Wendell MacKenzie wrote:
    What is the current service pack level for WLE 5.1?
    Is this available for download anywhere?
    Thx.
    MacDuff

  • Install the latest Service Pack and Cumulative Update

    Hi Expert,
    I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
    installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
    Please suggest me if i donot install service pack then will it impact our installation?
    Please relply ASAP.

    Its always recommanded to have your database at patch level and cummulative update supported by SAP.
    If you don't perform now then you have to take again downtime to perform this activity.
    Regards,
    Nikunj Thaker

Maybe you are looking for