Deadline Panic--Encore Subtitles Do Not Burn with DL link Project

I have a big SD DV project that I DL ed to Encore where I did the usual Menu and Chapter Work, and this time I added subtitles. They are made by the book, per the docs, as shown in the tutorials, and they preview perfectly from the Encore Monitor, as do all the other Encore parts. The problem is that the subtitles not burn to the DVD--nada, nothing, zilch, zip, nicht. Everything else burns from Encore CS4 and everything else works perfectly.
I could have done the subtitles in PrCS4, but there were a lot and that operation simply goes a lot faster in Encore. But, the choice to do it there may have been a major mistake. However, I would like to salvage this if I can. I simply cannot find where I have missed any steps! It seems to me that if it previews in the Encore Monitor, it ought to burn. I have only one subtitle track and one audio track, which ought to be in compliance with the DVD standard.
I know this is perhaps not strictly the right forum, though it is related in essence because of the DL connectivity concept. I have, of course, posed the question in the Encore Subtitles forum, but don't expect any response from there in anything short of a week. Just not many posts ever in that forum. And I know that a lot of users here also burn their projects with Encore. Can anyone corroborate this as a bug, or tell me what might possibly be wrong?
Thanks very much.

Check your topic in the Encore forum.
-Jeff

Similar Messages

Encore CS6 will not Burn DVD and restart computer

Encore CS6 will not Burn DVD and freeze then restart computer. But if I burn to a Image file then use a program like Image Burn no problem burning a DVD. Whats up? The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues. Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760 Raid 5 system.

Things and Software to AVOID when authoring/burning a disc.
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

Survey Builder : Survey question not populate with questionnaire link.

Dear Friends
i have created application using SURVEY BUILDER Package application .
i have two application with same schema .one is my created application :100 and second is Survey Builder pacaskge application 105 ,with no chamge in survey builder application.
My Questionnaire Link is created but when i put this link into address bar then there is no rection,no question set open in that window.
Questionnaire Link
http://178.110.201.231:7777/apex/f?p=100:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
this is my application question link.
But if i change application no 100 with survey builder application 105 and submit then survey question open .
I am confuse where is problem why survey question does not populate with my application 100.
Please help.
Thanks

Did you get your link from "Manage Respondents"?
I usually get a link like
http://apex.oracle.com/pls/apex/f?p=67351:Q::ABCD::::
(this is an example that doesn't point to a real live survey).
http://178.110.201.231:7777/apex/f?p=105:Q::AAL8:::code:AQDQEIWJAUWVCGGZ
did not work for me, maybe because of your specific IP:port in the URL. Sometimes the colons ::: create a problem when copying/pasting to email, so I use a service such as is.gd to transform it into a simpler URL like
http://is.gd/B7hxIl
Does that help?
Ben

Ios 8 not working with chevy link

I upgraded my ipad 3 and iPhone 4S to IOS 8. After the upgrade neither device works correctly in my Chevrolet vehicle via Chevy Link. Both devices worked perfectly with Chevy Link when I was using IOS7.
When I plug in my ipad or Iphone it will connect and play songs but as soon as I select a playlist it displays an error message in my vehicle information screen. When you click "OK" to clear the message the device is immediately disconnected from Chevy link and the radio goes back to XM.
Any suggestions how to remedy the situation? As I said before, all of my Apple devices worked perfectly under IOS7.

After having the same problem with my 2013 Chevy Equinox, I did a factory reset of my iPhone 5s and re-installed IOS 8 from scratch.
I used my iTunes backup to restore my apps, contacts, photo ..etc
Since I did that, I was able to connect my phone via bluetooth to my Chevy Equinox, make phone calls, listen to music ..etc
So far so good. I made about 10 calls, stopped the car, restarted the car and reconnected the phone and it worked.
I wonder if the upgrade from IOS 7 to IOS 8 is not working properly and causing problems with Bluetooth. It seems that a full install after a factory reset fixed my problem.
Hopefully, it is the end of the nightmare. Good luck.

Slideshow created with iphoto will not burn with idvd

I cannot seem to burn dvd using idvd. slideshow created with iphoto

I'm having the same problem after upgrading to 10.3.9 and iphoto 4.0.3. Read below:
Until recently I was running 10.1.5 using iphoto 2 to burn folders of photos within a library. After upgrading to 10.3.9 and iphoto 4.0.3 I get a message: “The burn to the ARCHOS MiniCDRW XS8432 drive failed. The device failed to respond properly, unable to recover or retry.”
Actually, I got another message before I installed patchburn 3.1.2. After installing patchburn 3.1.2 for 10.3.X, system profiler recognized my burner and says it is supported but the above message is displayed after the program has stopped the process.
Toast Titanium 5.2.1 burns CD’s just fine but when a CD with an iphoto library is inserted into the CD-ROM the iphoto program will not recognize it. In other words, it won’t show up in iphoto as an iphoto library or anything for that matter. Maybe there’s a way to do this in Toast or maybe I need something else to make iphoto work with my burner.
Can anybody help me? Thanks!

Dual Layer DVD's not burning with Disk Utility

I successfully created two dual layer DVD's with a disk image that I created in iDVD. Checked both of those disks in a DVD player and both work fine. Now trying to burn more copies with the same procedure, same disk image file, same media manufacturer and all are failing. Any ideas? I can still successfully burn short videos on regular DVD's from iDVD so my burner has not completely failed. I had created a disk image out of the material that I need on the dual layer DVD because it's about 2 hours of video and iDVD was ejecting the disk too early without burning.

Sounds like the burner may have failed. It can fail in a way that only larger items cannot burn. Take it to your nearest Apple Store or Apple Authorized Service Provider to have them check it out

WRE54G not working with D-Link DIR-655

After having 2 Linksys WRT310N units fail within 14 months, I was given a D-Link DIR-655 to use for my home network. When I originally purchased the WRE-54G for use with the 310N, the signal strength as indicated on a Tivo and PS3 went from 20%-40% range to 70%-85%. These two components are approximately 30 ft horizontally, and 20 ft down vertically from the router.
Upon replacing the router with the DIR-655, both of these units are again registering signal of 20%-40%, as if the WRE-54G is not functioning, and/or the TiVo and PS3 are getting their wireless signal directly from the DIR-655.
I can access the WRE-54G's web interface, can ping it, can see it as active in the DIR-655's interface, and have two solid blue lights. Everything has been powered down and reset multiple times. I have the same issue whether or not the WRE-54G sits inside or outside my DHCP range.
How can I determine if these components are getting signal from the router through the WRE-54G or if they are getting the signal directly from the router and bypassing the WRE-54G, and is there a way to "force" these components to take signal from the WRE-54G?

Hello. Is the D-link an N router? The WRE doesn't really work well with N routers. The ppl that have say that security must be disabled. I think I have read posts that got this working, though. I'm wondering if the WRE is physically on the edge of your signal strength, e.g. if you got the WRE closer to the router it would work better. The only thing that is unusual is that you said you have two solid blue lights. The activity light should be blinking blue. So I guess I don't think the WRE is really doing anything right now, though you have all the indications except for increased signal strength.
As far as forcing the equipment to connect, you'd just have to set up static IP's and say that the WRE IP addy was the gateway, not your router. But I don't think that is the problem as WIFI will connect to the stronger signal if it is present. I just don't think the WRE is repeating the router signal.
Edit: Did a search. See if this post helps:
http://forums.linksysbycisco.com/linksys/board/message?board.id=Range_Expanders&message.id=2611&query.id=16490#M2611
Message Edited by Luckydog on 06-19-2009 03:07 PM

Ankh SVN does not work with Oracle DB Project in ODT 11.1.0.5.10 beta

I was able to add the new Oracle Database Project to my Subversion repository using TortioseSVN, but unfortunately, the Ankh Source Control options do not appear within Visual Studio and none of the icon overlays appear within Visual Studio.
Does anyone know any way to get this to work? Does anyone know if this would be an issue with Ankh or with the new Oracle Database Project?
null

Yes. Visual C# class projects work just fine with Ankh. It's only the new Oracle Database Project that doesn't have any Ankh menu options or Ankh icon overlays.
Check out this screenshot of my Visual Studio Solution explorer:
http://www.mixcollective.com/media/559/oracledbproject.jpg
You'll see that none of the folders under "Oracle.New" (a new 11.1.0.5.10 beta Oracle Db Project) have the green/read/yellow Ankh icons that indicate the status of the file. Also, none of the repository commit, update, etc options are available when you right click on folders or files in the project.

On Ticketmaster, the page titled "Box Office" where ticket information should be provided is mostly blank and on the Error Console is "ClickTrack is not defined" with a link to the problem page.

I'm using Firefox 4.0.1 on a Dell Inspiron laptop with Vista. I've had no problems before buying tickets from Ticketmaster using the same system.

Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun

Stabilizing not working with Dynamic Link

So, here's the steps:
1) Right click clip in premiere
2) Select 'Replace with after effects comp...'
3) In AE i click 'Stabilize Motion'
4) Select motion source 'cu_1.mpeg' the only video track
5) Check 'Position' and 'Rotation'
6) Setup my two tracking points
7) Click 'Analyze Forward' button
8) When analyzing is done i click 'Apply'
At this point the clip is stabilized.
9) Click 'Save' and return to premiere
This is where the problem is. Premiere sees the linked AE comp but doesn't do all the stabilizing. From what i can tell it's doing the anchor point but ignoring the rotation in the AE comp. I think this because i do see the edge of the frame moving around like it's doing some stabilization.
The clip is fine if I pre-render the AE comp.
Any ideas?
Thanks,
p

quote:
Originally posted by:
DwayneHeronimo But when I try to enbed the font or
setting embedFonts = true the text just disappears.
It's not enough to just type : embedFonts = true.. You have
to link also your fonts to be included in the produced flash - but
be careful. It will increase enough your swf 's file size,
depending the sets of fonts you enter!
The only secure way I have found to do it, using and other
languages characters, is to create a movieclip inside the first
frame of my file, containing dynamic texts with all types fonts
that I am using in my application (i.e. Myriad Pro, Myriad Pro
Bold, Myriad Pro Italic.. etc). I type on those texts just a dot,
and I embed them via Flash CS3 enviroment my fonts. Then I make the
movieclip Invisible.
If you want an example check this one:
http://www.sp7.gr/adobe_forum_data/04_EmbedFonts.zip
Due to embed fonts, the size of swf is ~180KB, although it
displays just a fading text....!

Q10 will not connect with BB Link via WiFi (updated software)

Hello! I have not been able to get my Q10 to connect to BB Link via WiFi since the lastest OS update. Before, it was not an issue. I can connect via USB without problems. I have uninstalled/reinstalled BB Link on my computer and it does not work even though both the PC and the device are connected to the same WiFi network. The checkbox in BB Link to allow WiFi connections is checked. It is not the end because I can at least connect via USB, but wireless was so convenient. Can anyone help? Suggestions? Thanks!

OK, just messing around with this more tonight. I was able to finally just get the iPod touch to connect to my phone via WIFI.
My question or concern still remains about the Bluetooth connection.,,,
Why is it that she can connect to my Personal Hotspot on my iPhone 5 even when I have the Personal Hotspot on my phone set to OFF?
Is this working as designed? Even if I change my phone's Personal Hotspot password, she can still instantly connect even if I have it set to OFF on my phone. You'd think that it would require for me to have it set to ON? Or at minimum, if I changed the Personal Hotspot password on my phone, it would at least prompt her to enter a valid password?
Thanks!

Touch screen not working with internet link in safari

Anyone has the same problem?
After 1.1.1 update, my touch screen occassionally fails to respond any tap on internet links in safari. no matter which web site you go to, no link will work on tap.
I tried to clean catch, cookies, etc. The only way to out of it is to reset the phone (both key pressed).
It happens about once or twice a day, not often enough for Apple people to duplicate it, but enough to bother me.

I have had the same exact problem occur 3 or 4 times since the update. I fix it by turning the phone off and on again.

Breakpoints not working with Command Line Project

I have created a “Command Line Utility” “C++ Tool” and I am unable to breakpoint into the code. I’m in the Debug environment and select “Debug Executable” but no luck. I created the sample tutorial which is a Coco Hello World example and was able to get breakpoints to work there. I downloaded and installed XCode yesterday. Been trying to get breakpoints to work every since with no luck. Thanks in advance.
Sean
MBP Mac OS X (10.4.9)

OK, the plot thickens a little. I was being too aggressive on my breakpoint. If I breakpoint at the first cout then I can breakpoint. The problem is if I break after the cin. Breakpoints after cin won’t execute and if I pause all context is lost – like the stack got corrupted.
<pre>
#include <iostream>
#define ENDFILE "CTRL-D or CTRL-Q then CTRL-D in XCODE"
int main (int argc, char * const argv[])
char next;
// insert code here...
std::cout << "Hello, World!\n";
const char NWLN = '\n';
int charCount;
int lineCount;
lineCount = 0;
std::cout << "Enter a line or press " << ENDFILE << ": ";
std::cin.get(next);
while (!std::cin.eof())
charCount = 0;
while (next != NWLN)
std::cout.put(next);
charCount++;
std::cin.get(next);
std::cout.put(NWLN);
lineCount++;
std::cout << "Number of characters in line " << lineCount
<< " is " << charCount << std::endl;
std::cout << "Enter a line or press " << ENDFILE << "; ";
std::cin.get(next);
std::cout << std::endl << std::endl << "Number of lines processed is "
<< lineCount << std::endl;
return 0;
</pre>
MBP Mac OS X (10.4.9)

Your Session is not Valid with Google link

Hi Gurus,
I have a B2C with 3 different scenario and shop.
When Google or other Search engine indexing my Ecommerce pages
and allow anonymous people to access to pages, they have a Invalid Session Page.
How can fix this kind of problem?
Thanks
Nicola

This is my Stack Error text
java.lang.ClassCastException: java.lang.String incompatible with java.lang.Boolean
     at com.sap.isa.backend.r3.shop.ShopBase.read(ShopBase.java:626)
     at com.sap.isa.backend.r3.shop.ShopR3PI.read(ShopR3PI.java:99)
     at com.sap.isa.businessobject.BusinessObjectManager.createShop(BusinessObjectManager.java:209)
     at com.sap.isa.isacore.action.ShopReadAction.isaPerform(ShopReadAction.java:431)
     at com.sap.isa.isacore.action.IsaCoreBaseAction.isaPerform(IsaCoreBaseAction.java:377)
     at com.sap.isa.isacore.action.IsaCoreBaseAction.isaPerform(IsaCoreBaseAction.java:417)
     at com.sap.isa.isacore.action.IsaCoreBaseAction.ecomPerform(IsaCoreBaseAction.java:343)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1012)
     at com.sap.isa.core.RequestProcessor.processForward(RequestProcessor.java:643)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:260)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
     at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any Help would be appreciate..
Thank
Nicola
Edited by: Nicola Bisinella on Jan 21, 2010 10:14 AM

File not found when cross-linking projects -- solved

I hadn't yet posted my question when I figured it out, so
here it is for future readers...
My projects use the "Open other project" command to bring up
the next segment and jump to topics (16 projects for the 70 minute
video). All the projects are named in upper case S2_FS.cp and
published with an upper case Project Title to create S2_FS.exe.
Never had a problem when I was making Windows executables,
but I just created a Flash version, and was getting 404s for
anything past the first segment. Turns out Captivate 2 doesn't
completely honor case:
- The Publish dialog's warning about links to other projects
used all upper case names
- It created upper case S2_FS.swf
- Also created upper case S2_FS.htm, which linked to upper
case S2_FS.swf
- But inside the swf files, links were lower case s2_fs.htm
Had to dig through my server's error log to find this,
because of course testing locally on Windows still worked.

I hadn't yet posted my question when I figured it out, so
here it is for future readers...
My projects use the "Open other project" command to bring up
the next segment and jump to topics (16 projects for the 70 minute
video). All the projects are named in upper case S2_FS.cp and
published with an upper case Project Title to create S2_FS.exe.
Never had a problem when I was making Windows executables,
but I just created a Flash version, and was getting 404s for
anything past the first segment. Turns out Captivate 2 doesn't
completely honor case:
- The Publish dialog's warning about links to other projects
used all upper case names
- It created upper case S2_FS.swf
- Also created upper case S2_FS.htm, which linked to upper
case S2_FS.swf
- But inside the swf files, links were lower case s2_fs.htm
Had to dig through my server's error log to find this,
because of course testing locally on Windows still worked.

Deadline Panic--Encore Subtitles Do Not Burn with DL link Project

Similar Messages

Maybe you are looking for