Deadline path not reachable...

Hi All,
I have created a PR workflow in which i am sending a workitem for overall release. I have set the modeled deadline for the same to 2 minutes. But it is not flowing into deadline branch even after 30 minutes. What can be the reason for the same?
Please advice.
Regards,
Guddan

Hi
please check in the transaction SWU3
probably the configuration for Schedule Background Job for Missed Deadlines is not configured

Similar Messages

CUE Website not reachable

Hello,
we've configured a UC560 with Cisco Standards. So the CUE has the IP-adress 10.1.10.1 (Gateway .2).
The CUE successfully answer a ping ! The CCA CUE diagnostics ended successful.
I also can connect to CUE through CLI of the UC560.
BUT : The Webinterface of the CUE does not answer. The webiste ist not reachable.
Here the http config of the UC560 :
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/GUI
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services
http://10.1.10.1/voiceview/common/login.do
url authentication
http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
and the telephony part :
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
Can the problem be based on corrupt http CUE files or the wrong version ? Which files are required ?
May the Firewall ACLs block this traffic ? But ping works !
Please help !
Greets
Huck

That usually happens when your PC is using a default gatway that doesn't know about CUE address subnet.
So you have to fix your routing.

Uc560 - CUE Webinterface not reachable

Hello,
i have a problem with my UC560. Especially with the CUE Webinterface. After config my UC560 everthings working fine.
But the webinterface of the CUE is not reachable. I can ping the integtr. Service. Engine with IP 10.1.10.1. from my network.
A service-module integr.S.E. status reports -> everything OK. A seesion on CLI also connects and works.
Is there any idea ? help !!!
here some configs :
interface Integrated-Service-Engine0/0
description Interface used to manage integrated application modulecue is initialized with default IMAP group
ip unnumbered Vlan90
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface GigabitEthernet0/1/3
description Interface used to communicate with integrated service module
switchport access vlan 90
no ip address
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface Vlan90
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Vlan90

Hello,
I have a similar issue. I know that there are many threads like this but this is the newest I found
I've wiped the preloaded configuration and now using the uc560 like a standard ISR. I've made a lot of tests and changes, using G0/0 and an IP for connecting to the LAN, or g0/1/0 as trunk/access port connecting to the LAN. I've ended up with the configuration I'm attaching. There is no way to have connectivity with the CUE. I've tried with and without VLANs (the file attached is with VLANs). NAT is irrelevant in my case since there is not anything to translate it's all a private routed network. I still cannot ping the ISE inf from inside the uc560 localy or the gateway address from inside the CUE.
This G0/1/3 seems to need some special configuration to be done in order to work. Do you know what is it?
It's also not possible to make the CUE to factory default. No initial setup wizard starts... nothing. No wizard needed for the initial setup like all the other CUE products?
Here is the config:
! interface GigabitEthernet0/0 no ip address duplex auto speed auto h323-gateway voip interface!interface Integrated-Service-Engine0/0 description Loopback interface used to manage integrated application module ip unnumbered Vlan2 service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface GigabitEthernet0/1/0 switchport access vlan 2 no ip address!interface GigabitEthernet0/1/1 no ip address!interface GigabitEthernet0/1/2 no ip address!interface GigabitEthernet0/1/3 description Interface used to communicate with integrated service modue switchport access vlan 2 no ip address service-module ip address 192.168.2.254 255.255.255.0 service-module ip default-gateway 192.168.2.2!interface BRI0/1/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 5!interface BRI0/1/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup trunk-group isdn 6!interface BRI0/2/0 no ip address isdn switch-type basic-net3 isdn point-to-point-setup! interface BRI0/2/1 no ip address isdn switch-type basic-net3 isdn point-to-point-setup!interface Vlan1 no ip address!interface Vlan2 ip address 192.168.2.2 255.255.255.0!ip forward-protocol ndip http serverno ip http secure-serverip http path flash:/gui!ip route 0.0.0.0 0.0.0.0 192.168.2.1ip route 192.168.2.254 255.255.255.255 Integrated-Service-Engine0/0!!!telephony-service no auto-reg-ephone max-ephones 15 max-dn 15 ip source-address 192.168.2.2 port 2000 secondary 192.168.2.3 rehome 15 time-zone 28 time-format 24 max-conferences 4 gain -6 moh flash:/media/music-on-hold.au multicast moh 239.0.0.1 port 16384 route 192.168.2.2 web admin system name admin password cisco time-webedit transfer-system full-consult create cnf-files version-stamp 7960 Mar 06 2013 15:02:09!
Thanks in advance!

OSB RESTful service is not reachable

Hi Team,
I defined an OSB REST service as mentioned in https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
When I test it from SOAPui, it is not reachable. Any pointers please.
Thanks,
AG

You need to make an entry in OHS config files like below:-
Example:With the following configuration, requests for the /myapplication URI received at the Oracle HTTP Server listen port will be forwarded to /myapplication on the Oracle WebLogic Server with the listen port localhost:7001
<IfModule weblogic_module> <Location /myapp1> SetHandler weblogic-handler WebLogicHost localhost WeblogicPort 7001 </Location> </IfModule>
To forward requests to an application running on a cluster of Oracle WebLogic Server instances, specify the details of that destination cluster within a new<location> element.Syntax:
<IfModule weblogic_module> <Location path> SetHandler weblogic-handler WebLogicCluster host:port,host:port,... </Location> </IfModule>
http://docs.oracle.com/cd/E23943_01/web.1111/e16435/oracle.htm#PLGWL553

11g on Win2k8R2 - ORA-12560 - Database up but not reachable

Hello,
i've got a serious issue with a production database which affects about 500 users. I already created a SR but by now i got no answer and i thought maybe someone here got an idea.
What i did:
- Installed Windows Updates via WSUS Offline
- Rebooted the machine
What works:
- Database can be opened without a problem via sqlplus or "oradim -startup -sid xxx"
- "tnsping xxx" works
- listener can be started via "lsnrctl start" and shows a handler for xxx
What does not work:
- listener can NOT alternativel be started via "srvctl start listener" (PRCR-1079: Ressource ora.LISTENER.lsnr could not be started, CRS-5016, CRS-2674
- database is not reachable via sql developer - not from my work client and not locally from the server itself
- enterprise manager is extremely slow and gets timeouts (i can't login) when the database is open, when i shutdown the db em is really fast
- alertlog is full of "Fatal NI connect error 12560 [...] opiodr aborting proccess unknown ospid (6696) as a result of ORA-609)
What i tried to resolve the issue:
- Uninstalled all Windows Updates which i installed -> no effect
- rebooted the machine -> no effect
- tried to start listener before the database or database before listener -> no effect
- checked local_listener parameter which is automatically set by system when starting the database, also set by myself -> no effect
- disabled windows firewall and antivirus -> no effect
The thing is, that i just rebooted the machine and the database is perfectly up but not reachable. I really don't know if it's a good idea to change tns files etc. because it worked before the reboot.
Anyone got an idea?
Thank you very much!

which OS user owns the grid software?
which OS user owns the asm software?
which OS user owns the Oracle DB software?
Do you mean the windows service? I installed the database and grid software with the user oracle (with administrator privileges).
The services are all owned by "local system", besides OracleOraCrs11g_home1TNSListener and OracleServiceSID (they are owned by ./oracle)
which %ORACLE_HOME% is being used to start the listener?
ORACLE_HOME=C:\app\oracle\product\11.2.0\grid
what does %PATH% contain when invoking lsnrctl & similar utilities?
Path=c:\app\oracle\product\11.2.0\dbname_1\bin;C:\app\oracle\product\11.2.0\grid\bin;[other windows paths]
which OS user is logged onto the DB trying to start the listener & such?
user "oracle" with administrative privileges, i used a command line started as administrator

IOS Remote Desktop App resolves hostname but throws Host is not reachable error.

Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
    activeUsername = "DOMAIN\\UserName";
    arcTimeout = 1800;
    cacheId = BEBD1725D63BB841;
    configurationVersion = 8;
    console = 0;
    host = "server.mysite.com";
    label = "Server";
    mouseMode = "-1";
    port = 3389;
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
    User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
Cameron

Hi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

Hi All,
we are trying to preview the PDF output in the XML Publisher Desktop Application.
We are able to LOAD the data successfully.
But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
We are using the XMLP Desktop application on the Client Machine.(Citrix)
Can anybody help us in this regard?
Thanks,
Sachin.

Hi.
You are posting in the wrong forum.
Please post to the BI Publisher Forum:
BI Publisher

Officejet Pro X476dw MFP not reachable

Hi,
out of the blue my Officejet Pro X476dw MFP turned 'not reachable' from my MacBook. Device is still connected to my Wifi network, no changes there since last use. I can print ok from my iPhone. I turned the device off and on again - no success. I turned the MacBook off and on again - same. I reconfiguered Wifi connection at device - same. I deleted printer from MacBook and tried to re-add but installation program couldn't find device. I tried to connect manually using IP address that was shown on device - 'device not reachable'.
I am running out of ideas, appreciate any help!
Thank you!
Maik.

@weirdharrell
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Photosmart C4385 "Device Not Reachable"

I know this has been addressed in other threads, but none of the solutions have worked for me and my configuration is a little different. So here goes:
I'm running OS 10.6 Snow Leopard with my C4385. My computer is connected to a wireless network via an extender. I don't know anything about the router other than it's probably a Cisco since that's in the network name. The router and extender are both in my landlord's house, so I don't have access to them to reboot, check settings, or anything. Until this morning my printer was associated with the main network, which worked fine, but the signal is very weak and I would rather have it associated with the extender network. I went through the HP Setup Assistant and now all I get is the "Device Not Reachable" error message, whether I use the extender or main network.
I printed a Network Configuration Page and typed the printer's IP into my browser, and it shows up just fine, saying it's connected to the main network. Print & Fax under System Preferences disagrees and I can't print at all anymore (except with the USB cable). The only thing I changed recently is switching to a manual IP address for my laptop since I had lots of connectivity issues with automatic IPs, but after that everything worked until this morning when I ran Setup Assistant.
Sorry for writing a novel. I wish I had more information about the hardware but my landlord's not very helpful with these sorts of things. Any advice would be great! I've tried scrubbing software and reinstalling it and resetting the printing system, with no luck.

I see a couple of potential problems, here.
First, adding the printer by IP is dicey. If the router changes the printer's IP (actually WHEN it does, because eventually it will), then your Mac may lose track of it. Plus, adding by IP usually only enables printing, not scanning.
Second, HP printers don't seem to play well with wifi extenders. Is there a way to move your printer so that it is connected to the main router, not the extender?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

LSMW LOGICAL PATH not set error

Hi,
    when i save an lsmw the error is coming as logical path not set. I guess this is for the CONV and READ files. Can ne one tell where can we speicfy this path. Right now we have to manually store the paths for these. Where in the settings can we defualt this path for these files.

Check the Specify Files Step:
Files
        Legacy Data          On the PC (Frontend)
            Input File                     D:\Documents and Settings\file4.txt
                                           Data for One Source Structure (Table)
                                           Separator Tabulator
                                           Field Order Matches Source Structure Definition
                                           With Record End Indicator (Text File)
                                           Code Page ASCII
        Legacy Data          On the R/3 server (application server)
        Imported Data        File for Imported Data (Application Server)
            Imported Data                  /usr/sap/tmp/ZHR.lsmw.read
        Converted Data       File for Converted Data (Application Server)
            Converted Data                 /usr/sap/tmp/ZHR.lsmw.conv
        Wildcard Value       Value for Wildcard '*' in File Name

LSMW by BI : Unable to specify file in step 7; logical Path not assigned

Hi,
I'm trying to uplaod HR DATA using object 0555 and method 0000 for Program RPDUSTD00 using LSMW Batch Input Method.
In step 7 when i specify file which tab delimited text file at front end pc(at my pc) let say c:\test.txt and save I got error message 'Logical path not assigned'.
Please suggest what I'm missing and what i need to do to get it correct.
Thanks,
Anshuman.

Hi,
There are other files specified in the screen for imported and converted data. These files must be accessible on SAP application server. If the logical file names are not created use physical ones lik /tmp/blabla.lsmw.read etc.
Make sure you use different files for different objects.
Kind regards
Michael

Logical Path not defined..?

Hi,
I recently got CRM 5.0 installed on my system. Very first step of 'Maintain Business Partner' it says, 'Logical Path not defined'.
Tried to open activities, says' Logical system not defined'
Please suggest what is the problem & how to rectify this.
A prompt reply wil be highly appreciated.
Thanks
Anil

Hi ,
You need to Define Logical System for your System to Allow you to Execute Actions
Path:SAP Web Application Server>Business Intelligence>Links to Other Source Systems>General Connection Settings::
In this step, you can define the logical systems in your distributed system.
Caution:Logical systems are defined cross-client.
Activities
1. To create a logical system, choose Edit -> New Entries.
2. Enter a name for the logical system that you want to create.
3. Enter a description of the logical system.
Enter the Logical System that you are using,
These Links may Further Help up for Details:
http://help.sap.com/saphelp_crm50/helpdata/en/b4/b0b13bb3acef3ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/55/38e74110cf0b7fe10000000a155106/frameset.htm
Hope it Answered your Queries..
Thanks and Regards,
RK.
Added Links for Further Help: RK on Mar 5, 2009 12:07 PM

ISE NODE NOT REACHABLE when building distributed deployment

I am trying to build a distributed deployment with the following personas:
2 policy admin nodes
2 monitoring nodes
4 policy service nodes
This was a project that was partially implemented but never in production. It was in a distributed deployment, but half the nodes were no longer working (http errors or devices weren't reachable or could not sync). I decided to start from scratch. All nodes were:
-de-registered
-application was reset to factory defaults on all nodes
-upgraded all 8 nodes to 1.1.4.218 patch 1
-installed all new certs and joined all nodes to the domain
-added to DNS forward and reverse lookup zones
When I make 1 admin node primary and register the other nodes (secondary admin, monitoring, policy services) the nodes successfully register and show up in the deployment window of the primary; however, all the nodes show as NODE NOT REACHABLE. After registration, I've noticed that the registered nodes are still showing as STANDALONE if I access the GUI. I've tried rebooting them manually after registration and they are still unreachable. I have also tried resetting the database user password from the CLI on both admin nodes and the results are always the same.

Originally I had added them all at the same time. I thought that maybe I just wasn't waiting long enough for the sync. I waited an entire day and all the nodes were still unreachable. At this point, I've de-registered all the nodes, rebooted all the nodes, converted the primary back to standalone (the remaining nodes never converted from standalone to distributed even when I rebooted them after registering despite a message that they were successfully registered), converted one node back to primary and tried to register just the secondary admin node giving it plenty of time to sync; this node is still not reachable from the primary.
I've quadruple checked the certificates on all the nodes, these certs were all added on the same day (just last week) and the default self-signed certs were removed.
I had restored from a backup on the primary so I might just rest the config on that node and try joining the other nodes before I restore again.

ISE 1.1.3.124 secondary node not reachable after registration

G'day All,
I'm constantly seeing that the sync and replication status for my secondary admin/monitor node in the primary node as node not reachable. The secondary still thinks it is in standalone mode. When I run the ISE diag tool connectivity tests I am able successfully ping the devices from each other using both hostname and ip and the nslookup also works fine between both nodes. Ping and nslookups also work from different networks within the environment. The two nodes are in the same vlan on a 6500 vss pair but on different switches of the pair. I'm new to ISE so any help is greatly appreciated.
Thanks All.
JS
Sent from Cisco Technical Support iPhone App

Hi Saurav,
Thanks for your prompt repsonse...
I have worked through that section of the document. The registration completes successfully, I've got NTP sync on both nodes and the system time on both nodes is identical.
I am only using the self signed certificates, but following the user guide instructions I have imported the secondary's cert into the primary node.
Just as of about 30 minutes ago, I saw an alarm on the Secondary ISE node stating that a Slow or Stuck Replication has been detected...
As I said in the original post, I can ping the fqdn's from each other so it appears that the DNS requirements have been satisfied.
I've changed the admin account password, I am certain that the ISE DB passwords are correct and the same on both nodes and the timezones for both nodes is the same also....
It looks to me that registration is fine, but the first full replication isn't completing successfully
Thanks,
JS

Deadline path not reachable...

Similar Messages

Maybe you are looking for