Deadline seems to be dead for me!!!

I have done this before ... now i am wondering whats wrong here..
i have an idea what it could be... but just wanted to run it thru the ppl here just to check if i am missing something...
I added a deadline to a display workitem..
1minute starting from the time for the creation of the workitem..
As you could have guessed that it is not triggering... now i checked the container values for that instant... it shows me the following....
Desiredendaction - SWW_DI_CREATE
Now this is suppose to be a FM correct ? It does not exist could that be the reason.
Its a pretty simple deadline i have no idea why it refuses to trigger.
Anyidea's i am totally out of ideas here... I am on 4.7C
I have done this on 4.5B and ECC5.0 before... it would work then just by doing what i have done before...
Any clues anyone!!!!!!!!!!

OK.  First thing's first.  Refresh the buffers using SWU_OBUF and refresh the org environment using the option in SWUS.  Then try the following:
1)  Open the deadline period up to 10 minutes or so.  This is to ensure you aren't tripping over your own workitem when the DHEX program runs.
2)  Try setting a modelled deadline with a SendMail task in the deadline processing leg.  This will identify whether the issue is the deadline method in the step, or with the deadline setup for the system.
Before doing either it is always a good idea to talk a walk for ten or twenty minutes to clear your head and refresh your thoughts.  First got this practice from "Zen and the Art of Motorcycle Maintainence" and it often is instrumental in finding solutions.
Let us know how you go.
Regards
Gareth

Similar Messages

  • I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
    Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case)  then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc.  It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
    So again the first step is to find out what is wrong.
    good luck

  • Download link for Android version of Firefox Mobile Beta seems to be dead

    Didn't know where else to to write this: The download link on http://firefox.com/m/beta seems to be dead. I have tried both the /da and the /en-US version.
    I'm on Android 2.1-update1 on a Sony Ericsson X10 Mini Pro . All other downloads and apps work fine, so I think this might be a simple 404 (Btw.: I tried a couple of days ago as well with the same result).)
    Let me know if I can help troubleshoot it further.

    Sorry, Firefox is not available for the Xperia X10 Mini Pro. For more information, see:
    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

  • My iphone battery seems to be dead, what do i do?

    my iphone battery seems to be dead, no noise, no charge battery signal, nothing. what can i do?

    um. bring the phone to Apple for evaluation would be the first thing that comes to my mind

  • Voice Signal Goes Dead for a Few Seconds From Time to Time

    I live in a rural part of Marin County that has poor signal:  one bar or less.  I've purchased a signal booster which has increased my bar level to 4 -- which is terrific.  What I'm noticing however is that the voice signal goes dead for a few seconds (5 - 10 seconds) during a conversation.  This happens every few minutes. Voice connectivity then returns for a few minutes only to cut off again for a few seconds and so on.  This happens if I'm inside my house.  If I go outside, it doesn't seem to happen.  I've turned the booster box this way and that but no change.  I've also changed the ariel this way and that, but no change.  What's up with this?  It's very annoying to be on a call and have the sound go dead. 

        Hi yraglleb - Let's keep your audio clear and consistent! What model is your Network Extender? May I also ask the current iOS version of your device? Check Settings>General>About. Have you tested other phones on the same Extender? I look forward to getting this resolved!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • DDK Links dead for PCI-6133/6143 / Searching docs and examples

    Hello,
    On the following page
    http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument&lang=en&node=seminar_US
    the links for the RLP examples and documentation of the 6133/6143 PCI-Card seem to be dead.
    Can anybody post these please?
    Thanks,
    Thomas Fleischmann

    Thanks.  The links are good now. 
    -Alan A.

  • What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple. We want to host the app elsewhere. How do we host our DPS app on our client's website?

    What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.

    Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
    Digital Publishing Suite Help | Creating viewer apps for private distribution
    Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
    Another option is to add the development app to several devices and use those for your demo.

  • IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

    I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
    My battery then ran out, and my iPod was dead for two days.
    My iPod charging cable wasn't working, so i went out to buy a new one.
    After charging it with the new cable, it would not connect to the internet.
    My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
    I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
    Is there any way to fix this?

    If not this
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have an older iPod that no longer shows up in iTunes or appears to be charging.  When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point.  Is it dead for good?

    I have an older iPod that no longer shows up in iTunes or appears to be charging.  When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point.  Is it dead for good?

    If it is otherwise working, you can change the battery.  If you want to do it yourself, you can buy the part on eBay and other online sources.  Just make sure you know the type of iPod you have so that you get the right part.
    http://support.apple.com/kb/HT1353
    There are online guides, including the ones on this web site
    http://www.ifixit.com/Device/iPod
    (Note:  Most replacement batteries come with plastic/nylon tools seen in the guides.)
    You can also have a repair business do the work.
    If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

  • My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    Most likely, water damage.
    You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
    If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
    Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

  • The scaling selection using SHIFT doesn't seem to be working for me all of a sudden.......how can I resolve ?

    The scaling selection using SHIFT doesn't seem to be working for me all of a sudden.......how can I resolve ?
    Specifically, when I select and object I used to be able to hold SHIFT while re-sizing the object and keeping it in scale.
    All of a sudden, I don't have that option as my SHIFT key doesn't seem to activate within AI
    B.Marks

    B,
    You may have something disturbing Illy so she gets confused, see Item 7 in 5) below for usual suspects, or you may have what appears to be a preference corruption, see 1) - 4) and 6) below.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies. My monitor is a 23 IN' acer s series.

    I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks

    No work around that I know of.
    Apple Feedback http://www.apple.com/feedback/

  • My iPhone 4 has been dead for 24 hours and it has been charging for 12 hours. I have tried holding the home and lock button down but it still has the black screen, what is wrong with it? It just randomly died on means won't turn back on

    My iPhone 4 has been dead for 24 hours and I've been charging it for 12 hours and it still won't turn on. I have tried holding the lock button and home button down, even connected it to computer but nothing's happening, it randomly died on me.

    Hi Lauren,
    When troubleshooting power issues, we want to make sure we have followed all steps outlined in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • Hey I got my phone stolen yesterday, but it was dead for 24 hours before i checked find my phone so it says offline. I called verizon suspended my service and they said if the person tried to sell it back, or put their number on it, it will get flagged. I

    Hey I got my phone stolen yesterday, but it was dead for 24 hours before i checked find my phone so it says offline. I called verizon suspended my service and they said if the person tried to sell it back, or put their number on it, it will get flagged. I was just wondering if i should reinstate my service and try and wait for it to turn back on and then go get it because you need internet for it to track and with the suspended service, it can only track if connected to wifi, but they wont get past my password.

    Where exactly did you buy the "new iPhone "
    A country might help as well .This is a WW forum
    Are Direct Mobiles an Approved Apple iPhone reseller if not it may well be a fake

  • My ipod touch has been dead for about three or for weeks now it will not come back on, my ipod touch has been dead for about three or for weeks now it will not come back on

    My ipod touch was dead for about three weeks, i charged it all last night and most of today, why wont it come back on? Can anyone give me advice?

    https://discussions.apple.com/message/15201309#15201309
    Same advice you got the first time you asked the same question.

Maybe you are looking for

  • Low fax quality using fax as a system printer

    1. The fax quality and resolution using the original setup as a printer is very low. I can't see the reason because it's all done without printing, a digital file format tranforming. 2. How can I approach the fax manager not when printing a new fax?

  • How to enable routing between HWIC-4ESW and Onboard FE on cisco 1841 router..?

    Hello All, I have a cisco 1841 router, recently i have purchased HWIC-4ESW slot for my router. The module is working fine i could able to see additional FE ports(fe0/0/0,fe0/0/1...).Now problem comes in routing i.e. these HWIC-4ESW ports and Onboard

  • Create report in webi

    Hi I am new to bex queres as a source using xir4 .How can i cretae cross tab as below      Measur1     Measure2     M3     M4 Region                     Offering                     Genitic                     Total     Sum(M1)     Sum(M2)     Sum(M3

  • Customer Services : disconnection

    how to complete disconnection if meter is not found on site?

  • Printers and CS5

    We have been using Photoshop CS3 and an Epson scanner for the last couple of years with no trouble.   We have just upgraded to Photoshop CS5 and their seems to be no TWAIN facility.   Ergo, we are unable to do any scanning.   The Help facility is uni