Dealer Portal - Vehicle Sales - Maintain more selection Criteria

Hi,
In Dealer Portal, Vehicle Sales --> Work Overview, I am getting the below error.
Error message: Maintain more selection Criteria.
What configuration is missing? I am Portal consultant, Please provide step by step procedure to fix this.
Kindly support.
Regards,
NS

Any solution???

Similar Messages

Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

Hi,
In the Dealer Portal, Vehicle Sales Role --> Personalization.
I am getting below Warning message.
The Web Dynpro component assignment for business partner is missing.
As per my investigation found below.
Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
BUT do NOT understand the name of WebDynpro Component to provide.
What are the entries or WebDynpro component names to fill in below?

Hi Hussain,
Could you share the step-by-step solution? Thanks.

MB26 - Activate "Sales Order" as Selection Criteria

Dear friends ,
Is it possible to activate field "Sales order" as selection criteria ?
Best regards,
Ale

Hi,
The field is already in the report.
What do you mean by activtion of field.
If you want to make it mandatory then you can create a variant and you can make sales order field as the required field.
Regards
k

Archiving: adding more selection criterias for MM_EKKO

Is there a possibility for adding new selection criterias for object MM_EKKO? Any exits for Release 4.6c?

Deactivated means that you have executed a 2-step archiving.
You have different residence times. SAP set the deletion flag if residence time one is met, but residence time 2 not yet.
If both times are met, the PO gets archived.
for examples see OSS note 948493 - Residence time in new reports RM06EV47, RM06BV47
You probably have customized the test variant for MM_EKKO as production variant, other wise SAP would not have updated your database.

How do you retrieve PNP variant selection criteria?

I have a variant which I know are stored in the VARI table and I can retrieve almost all the contents of it using the function RS_VARIANT_CONTENTS.
But on the selection screen for my PNP report, there is a button labeled "Search Help" where you can enter more selection criterias, but as far as I can tell, these are not retrieved when using the aforementioned function.
I've tried looking for a function to retrieve these but I can't seem to find one, and I also haven't found a way to just read the CLUSTR and CLUSTD fields of the VARI table directly.
Does anyone know how to retrieve those selection criterias?

this is the right function
check if you don't have part of fields in several return tables
fields should be present if there is some value stored in variant for those fields

Delivery List : Selection criteria in VA05

Hii
Can any body please solve this out?
1. In VA05, I want to set the date of present month. Like if I open that in august then the date range will show by default 01.08.09 initial and ending 31.08.09 and if I open that in september then it will be 01.09.09 and 30.09.09
Note - Display Variant is not working. Tell me some other tricks
2. In Further Select Criteria there is no criteria for plant. Is it possible to set Plant option over there?
Please solve the issue.
Thanks and Regards
Santanu

Hi
Plant can be added to the list of further selection criteria through configuration. Please follow the below process...
Goto IMG - Sales & Distribution - Sales - Lists - Define Selection Criteria - execute
In the screen - goto New Entries and add the following details..
1. Program Name - SAPMV75A
2. TRG (Transaction Group) - 0
3. Display Group - K
4. Event - SELK
5. It - 8
6. Field Name - WERKS
Enter the details and save the changes. Goto VA05 and you can see the field PLANT in the Fur Sel Criteria.
Thanks,
Ravi

DB14 Backup - No logs exist for the selection criteria for system DEV

Hello Expert,
When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
so please suggest me where i need to maintain the selection criteria.
Thanks & Regards
Annasaheb

Hi Anna,
As told by Markus and Eric above...
you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
Why you are searching for money in an empty pot
Regards
Nick Loy

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

Report for Sales and purchase tax (selection criteria-Tax code)

Hi
I have one query for sales tax details which gives me detail for all A/R invoices and taxes involved in it. But i want that while executing query system should ask tax code and gives detail of tax amount in front of item and invoice according to tax code selected.
The query is:
SELECT M.DocNum AS 'Inv.No ', M.DocDate as 'Date', M.CardName as 'Customer Name',L.Dscription,L.Quantity,L.Price, (Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry) as 'Base Amt.(Rs.)', (SELECT Avg(TaxRate) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT % ', (SELECT Sum(TaxSum) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT (Rs.) ', (SELECT Avg(TaxRate) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST % ', (SELECT Sum(TaxSum) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST (Rs.) ', (SELECT Avg(TaxRate) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT % ', (SELECT Sum(TaxSum) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT ', (SELECT Avg(TaxRate) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as ' VAT% ', (SELECT Sum(TaxSum) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as 'VAT12.5 ', (SELECT Avg(TaxRate) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST 2% ', (SELECT Sum(TaxSum) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST @2 ', (SELECT Avg(TaxRate) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST % ', (SELECT Sum(TaxSum) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST ', (SELECT Avg(TaxRate) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED % ', (SELECT Sum(TaxSum) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED ', (SELECT Avg(TaxRate) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess% ', (SELECT Sum(TaxSum) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess ', (SELECT Avg(TaxRate) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' HCess % ', (SELECT Sum(TaxSum) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' Hcess ', L.LineTotal as 'Row Total (Rs.)',M.DocTotal as 'Doc Total' FROM OINV M LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry WHERE (M.DocDate >= '[%0]' AND M.DocDate <= '[%1]') AND TargetType ! = 14 GROUP BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal ORDER BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal
I want 2 queries which asks tax code during selection criteria for both cases sales and purchase.

Hi Malhotra,
Try this,
1st remove the FROM/TO Doc. Date where Condition in your Query report.
AND add the below where condition in your Query report.
WHERE statype = '[%0]'
OR
Try this Query Report.
SELECT
M.DocNum as 'A/R Invoice No.',
M.DocDate as 'Inv. Date',
M.CardCode as 'Customer Code',
M.CardName as 'Customer Name',
M.NumAtCard as 'Bill No. & Date',
ISNULL(L.ItemCode,'Service Item') as 'Item Code',
L.Dscription,
L.Quantity,
L.LineTotal,
L.TaxCode,
L.[VatSum],
M.WTSum AS 'TDS (Rs.)',
M.DocTotal as 'Total (Rs.)'
FROM OINV M
LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry
LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum
LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry
LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry
WHERE
(M.DocDate >= '[%0]' AND M.DocDate <= '[%1]')
AND
L.TaxCode='[%2]'
GROUP BY
M.DocNum,M.DocDate,M.CardCode,M.CardName,M.NumAtCard,L.ItemCode,L.Dscription,L.Quantity,
L.LineTotal,M.DocEntry,M.[DiscSum],L.TaxCode,L.[VatSum],M.WTSum,M.DocTotal
ORDER BY
M.DocNum,M.DocDate,M.CardCode,M.CardName,M.NumAtCard,L.ItemCode,L.Dscription,L.Quantity,
L.LineTotal,M.DocEntry,M.[DiscSum],L.TaxCode,L.[VatSum],M.WTSum,M.DocTotal
Regards,
Madhan.

Hide Particular Item Group from Selection Criteria of Sales Analysis Report

Hello Experts,
Is this possible to Hide Particular Item Group from Selection Criteria of Sales Analysis Report?
I have one Item Group as 'Special Items'.
Now, when I open Item wise sales analysis report, I want to hide above mentioned group from selection criteria.
Thanks in advance.
Best Regards,
Pankit Sheth

Hi,
1. Not possible to put validation for selection criteria windows.
2. In standard, I don't think it is possible to hide only one item group.
3. Alternatively don't give authorization to user for running sales reports. If still need create customized query and ask user run every month.
Thanks & Regards,
Nagarajan

Portal Activity Report with Selection criteria

Hi All,
I have created an iview using 'Portal Activity Report' template, added the iview to page and page is added to the role which is created for this report. Also, users were assigned to the new role. When users go to portal and see this report, they are seeing the final output of this report along with the 'Download Report' option.
My requirement is to give selection screen option (Type of report and Reporting period) to users. So that users will change the selection criteria and run the report as per their need. Please advice me on how to do this.
Thanks in advance.
Swapna.

swapna,
you can do this by creating a webdynpro application for accessing the database tables, the list of data base tables is in this [help |http://help.sap.com/saphelp_nw04/helpdata/en/48/6aa9429b930b31e10000000a1550b0/frameset.htm]document and use web dynpro application to connect to that tables. Check this thread for[ dynpro and database tables |dynpro and database tables;
regards
Mahesh

Copy selection criteria from quotation to Sales order

Hi Experts,
I am creating a quotation. For the quotation line item, i am going to batch determination. Then i am clicking the SELECTION CRITERIA button. It gives me the batch characteristics screen. There i am entering the values to the characteristics. While coming back to sales order screen, i am copying only the SELECTION CRITERIA ( i am not copying the batches ).
I am creating a sales order w.r.t the quotation. I want the selection criteria of the quotation line item to be copied into sales order line item. How to proceed for this?
I checked the copy control in VTAA. But i am not able to find any configuration to copy a Quotation line item "SELECTION CRITERIA" to a sales order line item.
Is this possible via a configuraton or thorugh any user exit?
Thanks,
Niranjan.

Hi,
Check the exit in programs MV45AFZZ (FORM USEREXIT_MOVE_FIELD_TO_VBKD) as u are using purchase order text.
Regards

Selection Criteria addition-Not working

Hi!
I have this report wherein I need to add two fields VBAP-Kunnr and knvv-konda in the selection screen so that I can do my drill down or search criteria based upon these two selections also apart from the existing ones, but unfortunately I am unable to get throiugh this and somehow putting this two selections in the selection criteria its not taking any effect or its just actinga dummy selection and I am unale to drill down my report based upon those. Can anyone have a look and let me know what could be the problem please. Help would be highly appreciated.
Thanks
*& Include ZSD_PFGENERATETOP Report ZSD_PFGENERATE
REPORT zsd_pfgenerate LINE-SIZE 170 LINE-COUNT 65.
TABLES: lips, likp, vbap, vbak, vbrp, vbpa, vbrk.
CONSTANTS: cns_vgtyp TYPE vbrp-vgtyp VALUE 'J',
cns_intyp TYPE vbrk-vbtyp VALUE 'M',
cns_vkorg TYPE vbak-vkorg VALUE 'CA01',
cns_vkorg_US type vbak-vkorg value 'US01', "DEVK903521
cns_parsh TYPE vbpa-parvw VALUE 'WE',
cns_parsp TYPE vbpa-parvw VALUE 'AG',
cns_parre type vbpa-parvw value 'RE', "bill-to
cns_auzwp TYPE vbak-auart VALUE 'ZWP',
cns_auzct TYPE vbak-auart VALUE 'ZCT',
cns_auzif TYPE vbak-auart VALUE 'ZIF',
cns_auztm TYPE vbak-auart VALUE 'ZTM',
cns_fkff TYPE vbrk-fkart VALUE 'ZFF5',
cns_fkos TYPE vbrk-fkart VALUE 'ZOF5',
cns_upd(1) TYPE c VALUE 'S',
cns_mode(1) TYPE c VALUE 'N'.
Internal Tables and Work Areas
DATA: BEGIN OF it_vbpos OCCURS 0,
werks TYPE vbap-werks,
audat TYPE vbak-audat,
auart TYPE vbak-auart,
kunag TYPE vbak-kunnr,
name1_ag TYPE kna1-name1,
kunsh TYPE likp-kunnr,
name1_sh TYPE kna1-name1,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
vbdel TYPE likp-vbeln,
psdel TYPE lips-posnr,
kunre type kunre, "Bill-to Party
name1_re type kna1-name1, "Bill-to Party Name
END OF it_vbpos,
BEGIN OF it_vbpos_temp OCCURS 0,
vgbel TYPE lips-vgbel,
vgpos TYPE lips-vgpos,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
END OF it_vbpos_temp,
BEGIN OF it_report OCCURS 0,
werks TYPE vbap-werks,
vbeln TYPE vbak-vbeln,
vbdel TYPE likp-vbeln,
audat TYPE vbak-audat,
auart TYPE vbak-auart,
name1_ag TYPE kna1-name1,
name1_sh TYPE kna1-name1,
name1_re type kna1-name1, "Bill-to Party Name
mark(1) TYPE c,
END OF it_report,
BEGIN OF it_vbeln OCCURS 0,
vbeln TYPE vbak-vbeln,
END OF it_vbeln,
wa_vbeln LIKE LINE OF it_vbeln,
wa_vbpos LIKE LINE OF it_vbpos,
wa_report LIKE LINE OF it_report,
wa_sel LIKE LINE OF it_report.
DATA: it_vbrp type table of vbrp,
it_vbrk type table of vbrk.
BDC Variables
DATA: BEGIN OF bdc_tab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
DATA: wa_bdc LIKE LINE OF bdc_tab,
it_bdcmess TYPE TABLE OF bdcmsgcoll.
*& Selection-Screen definition
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-002.
PARAMETERS: p_rdff TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X',
p_rdos TYPE c RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbap-werks OBLIGATORY NO INTERVALS,
s_auart FOR vbak-auart,
s_kunag FOR vbak-kunnr, "Sold-to Party
s_kunnr FOR likp-kunnr, "Ship-to Party
s_kunre for vbak-kunnr, "Bill to Party
s_vdatu FOR vbak-vdatu OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block0.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
PARAMETERS: p_vgbel TYPE vbak-vgbel.
SELECTION-SCREEN END OF BLOCK block1.
selection-screen begin of block block3 with frame title text-003.
parameters: p_billed RADIOBUTTON GROUP r1,
p_delvd RADIOBUTTON GROUP r1 default 'X',
p_all RADIOBUTTON GROUP r1.
selection-screen end of block block3.
*& Include ZSD_PFGENERATEE01
START-OF-SELECTION.
PERFORM read_report.
END-OF-SELECTION.
SET PF-STATUS 'STAT1000'.
IF it_vbpos[] IS INITIAL.
MESSAGE s999(z001) WITH 'No Data Selected for this criteria'.
ELSE.
PERFORM show_report.
ENDIF.
*& List Events
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'SELE'.
LOOP AT it_report INTO wa_report.
wa_report-mark = 'X'.
MODIFY it_report FROM wa_report.
ENDLOOP.
PERFORM show_report.
WHEN 'DSEL'.
LOOP AT it_report INTO wa_report.
wa_report-mark = ''.
MODIFY it_report FROM wa_report.
ENDLOOP.
PERFORM show_report.
ENDCASE.
AT LINE-SELECTION.
DO.
READ LINE sy-index FIELD VALUE wa_report-mark wa_report-vbeln
wa_report-vbdel.
IF sy-subrc NE 0.
EXIT.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_report-vbeln
IMPORTING
output = wa_report-vbeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_report-vbdel
IMPORTING
output = wa_report-vbdel.
READ TABLE it_report INTO wa_sel
WITH KEY vbeln = wa_report-vbeln.
IF sy-subrc EQ 0.
wa_sel-mark = wa_report-mark.
MODIFY it_report FROM wa_sel INDEX sy-tabix.
ENDIF.
ENDIF.
ENDDO.
REFRESH: it_vbeln.
LOOP AT it_report INTO wa_report WHERE mark EQ 'X'.
CASE 'X'.
WHEN p_rdff.
wa_vbeln = wa_report-vbdel.
WHEN p_rdos.
wa_vbeln = wa_report-vbeln.
ENDCASE.
APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
SORT it_vbeln BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_vbeln.
IF NOT it_vbeln[] IS INITIAL.
PERFORM process_vf01.
ENDIF.
*& Include ZSD_PFGENERATEF01
*& Form read_report
Routine to read applicable orders from database
FORM read_report.
DATA: lwa_lips TYPE lips,
lc_vbeln TYPE vbrk-vbeln.
Retrieve sales orders based on selection criteria where billing doc has not been
created for the delivery yet
REFRESH: it_vbeln, it_vbpos, it_report.
Select into table based on Onsite/Fixed Facility
CASE 'X'.
WHEN p_rdff.
changed for performance reasons (i.e. time-out)
k~vgbel is not in it_vbpos but was in select statment ?
SELECT vbap~werks vbak~audat vbak~auart vbak~kunnr AS kunag
vbak~vbeln vbap~posnr
INTO CORRESPONDING FIELDS OF TABLE it_vbpos
FROM vbak INNER JOIN vbap
ON vbak~mandt = vbap~mandt
AND vbak~vbeln = vbap~vbeln
WHERE vbap~werks IN s_werks
AND vbak~vdatu IN s_vdatu
AND vbak~vkorg in (cns_vkorg,cns_vkorg_US)
AND vbap~oid_ship IN s_kunnr
AND vbak~kunnr IN s_kunag
AND vbak~auart IN s_auart
AND ( vbak~auart = 'ZWP' or vbak~auart = 'ZIF' or
vbak~auart = 'ZCT' or vbak~auart = 'ZTM' or
vbak~auart = 'ZOIL' ).
IF SY-SUBRC = 0.
SELECT vgbel vgpos vbeln posnr FROM lips
INTO CORRESPONDING FIELDS OF TABLE it_vbpos_temp
FOR ALL ENTRIES IN it_vbpos
WHERE vgbel = it_vbpos-vbeln
AND vgpos = it_vbpos-posnr
%_hints oracle 'index ("LIPS" "LIPS~Z01")'.
SORT it_vbpos_temp by vgbel vgpos.
LOOP AT it_vbpos.
READ TABLE it_vbpos_temp
WITH KEY vgbel = it_vbpos-vbeln vgpos = it_vbpos-posnr
BINARY SEARCH.
IF SY-SUBRC = 0.
it_vbpos-vbdel = it_vbpos_temp-vbeln.
it_vbpos-psdel = it_vbpos_temp-posnr.
modify it_vbpos.
ENDIF.
ENDLOOP.
ENDIF.
WHEN p_rdos.
SELECT k~vbeln p~posnr k~kunnr AS kunag k~audat k~auart p~werks k~vgbel
INTO CORRESPONDING FIELDS OF TABLE it_vbpos
FROM vbak AS k INNER JOIN vbap AS p ON k~vbeln = p~vbeln
WHERE p~werks IN s_werks AND k~vdatu IN s_vdatu AND
k~vkorg in (cns_vkorg,cns_vkorg_US) AND "DEVK903521
k~vgbel EQ p_vgbel AND
k~kunnr IN s_kunag AND k~auart IN s_auart AND
p~oid_ship IN s_kunnr.
ENDCASE.
Determine if delivery has been billed out, if not can create PF Invoice - CHANGED
LOOP AT it_vbpos INTO wa_vbpos.
Check Ship-to in
SELECT SINGLE kunnr INTO wa_vbpos-kunsh FROM vbpa
WHERE parvw EQ cns_parsh AND vbeln EQ wa_vbpos-vbeln.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
Check for Bill-to
select single kunnr into wa_vbpos-kunre from vbpa
where parvw eq cns_parre and vbeln eq wa_vbpos-vbeln
and kunnr in s_kunre.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
Get Partner Texts
SELECT SINGLE name1 INTO wa_vbpos-name1_ag FROM kna1
WHERE kunnr EQ wa_vbpos-kunag.
SELECT SINGLE name1 INTO wa_vbpos-name1_sh FROM kna1
WHERE kunnr EQ wa_vbpos-kunsh.
SELECT SINGLE name1 INTO wa_vbpos-name1_re FROM kna1
WHERE kunnr EQ wa_vbpos-kunre.
CASE 'X'.
WHEN p_rdff.
IF p_delvd = 'X'.
optimized for performance reasons i.e. time-out
Check if delivery has been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc EQ 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ELSEIF p_billed = 'X'.
Check if delivery hasn't been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ENDIF.
WHEN p_rdos.
IF p_delvd = 'X'.
Check if order has been billed out
SELECT SINGLE * FROM vbrp
WHERE vbeln EQ wa_vbpos-vbeln AND
vgpos EQ wa_vbpos-posnr.
IF sy-subrc EQ 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
ELSEIF p_billed = 'X'.
Check if delivery hasn't been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON pvbeln = kvbeln
WHERE pvgtyp EQ cns_vgtyp AND pvgbel EQ wa_vbpos-vbdel AND
pvgpos EQ wa_vbpos-psdel AND kvbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ENDIF.
ENDCASE.
MOVE-CORRESPONDING wa_vbpos TO wa_report.
APPEND wa_report TO it_report.
MODIFY it_vbpos FROM wa_vbpos.
ENDLOOP.
if 'onsite field summary', then process by release sales orders
IF p_rdos = 'X'.
sort it_report by vbeln.
delete adjacent duplicates from it_report comparing vbeln.
else.
SORT it_report BY werks name1_ag name1_sh vbeln.
DELETE ADJACENT DUPLICATES FROM it_report.
endif.
SORT it_report BY name1_sh werks name1_ag vbeln.
ENDFORM. " read_report
*& Form process_vf01
Call transaction VF01 and fill screen table with order values
FORM process_vf01.
DATA: ln_index(2) TYPE n,
lc_field(20) TYPE c,
lc_fkart TYPE vbrk-fkart,
li_lines TYPE i,
lc_msgtxt(99) TYPE c,
lwa_bdcoptions TYPE ctu_params,
lwa_mess LIKE LINE OF it_bdcmess.
REFRESH: it_bdcmess.
lwa_bdcoptions-dismode = cns_mode.
lwa_bdcoptions-updmode = cns_upd.
CASE 'X'.
WHEN p_rdff.
lc_fkart = cns_fkff.
WHEN p_rdos.
lc_fkart = cns_fkos.
ENDCASE.
REFRESH: bdc_tab.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
' ' 'BDC_CURSOR' 'RV60A-FKART',
' ' 'RV60A-FKART' lc_fkart,
' ' 'BDC_OKCODE' '/00'.
LOOP AT it_vbeln INTO wa_vbeln.
ln_index = sy-tabix.
Up to the second delivery of the BDC add the Delivery to the screen, after that click the More Documents for every entry. logic changed for DEVK902353
CASE ln_index.
WHEN 1.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
WHEN 2 OR 3.
IF p_rdos 'X'.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' 'FKAN'..
ELSE.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
ENDIF.
WHEN OTHERS.
If p_rdos 'X'.
CONCATENATE 'KOMFK-VBELN' '(2)' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' 'FKAN'.
endif.
ENDCASE.
ENDLOOP.
VF01 will go to a different screen if only one line selected
DESCRIBE TABLE it_vbeln LINES li_lines.
IF li_lines EQ 1.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0104',
' ' 'BDC_OKCODE' '=SICH'.
ELSE.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' '=SICH'.
ENDIF.
CALL TRANSACTION 'VF01' USING bdc_tab OPTIONS FROM lwa_bdcoptions
MESSAGES INTO it_bdcmess.
WRITE: / 'BDC Messages:'.
SKIP.
LOOP AT it_bdcmess INTO lwa_mess.
CALL FUNCTION 'RH_MESSAGE_GET'
EXPORTING
arbgb = 'VF'
msgnr = lwa_mess-msgnr
msgv1 = lwa_mess-msgv1
msgv2 = lwa_mess-msgv2
msgv3 = lwa_mess-msgv3
msgv4 = lwa_mess-msgv4
IMPORTING
msgtext = lc_msgtxt
EXCEPTIONS
message_not_found = 1
OTHERS = 2.
WRITE: /5 lc_msgtxt.
ENDLOOP.
ENDFORM. " process_vf01
form update_bdc *
subroutine to add the data to the bdc table for trans. vf01 *
FORM update_bdc USING dynpro field content.
CLEAR bdc_tab.
IF dynpro EQ 'X'.
bdc_tab-program = field.
bdc_tab-dynpro = content.
bdc_tab-dynbegin = 'X'.
ELSE.
bdc_tab-fnam = field.
bdc_tab-fval = content.
ENDIF.
APPEND bdc_tab.
ENDFORM. "UPDATE_BDC
*& Form show_report
Report to Display Available Orders on Screen
FORM show_report .
DATA: l_idx TYPE i.
WRITE: / 'Available Orders/Deliveries for Plant:'.
LOOP AT s_werks.
WRITE: s_werks-low.
ENDLOOP.
SKIP.
FORMAT INTENSIFIED ON COLOR COL_HEADING.
WRITE: /5 text-h01, text-h02.
CASE 'X'.
WHEN p_rdff.
WRITE: text-h06.
ENDCASE.
WRITE: text-h03, text-h04, text-h05, text-h07,
/ sy-uline.
FORMAT INTENSIFIED OFF COLOR OFF.
l_idx = 0.
LOOP AT it_report INTO wa_report.
IF l_idx EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
l_idx = 1.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
l_idx = 0.
ENDIF.
WRITE: / wa_report-mark AS CHECKBOX,
wa_report-auart UNDER text-h01,
wa_report-vbeln UNDER text-h02.
CASE 'X'.
WHEN p_rdff.
WRITE: wa_report-vbdel UNDER text-h06.
ENDCASE.
WRITE: wa_report-audat UNDER text-h03,
wa_report-name1_ag UNDER text-h04,
wa_report-name1_sh UNDER text-h05,
wa_report-name1_re under text-h07.
HIDE: wa_report-mark, wa_report-vbeln, wa_report-vbdel.
ENDLOOP.
ENDFORM. " show_report
Thanks for your kind help.
Aarav.

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

BPL - Define Selection Criteria (Selection Exit)

We are using TDMS 3.0 with following patch level:
DMIS             2006_1_700     0010
DMIS_CNT     2006_1_700     0010
DMIS_EXT     2007_1_700     0000
We have a scenario where we want to transfer all sales transactions of particular plant in target system. We have selected package BPL scenario in TDMS with business context sales document.
Under 'Define selection criteria' activity, we are getting only sales Document number as a filter criteria. We can extend the filter criteria to any column of table VBAK, but not any of the dependent tables (Like VBAP - containing plant)
The operation guide shows an example of selection criteria for materials, filtering by the start table (MARA-MATNR) and at the same time by a dependent table (MARC-WERKS). I want to apply the same logic to tables VBAK & VBAP. There are two problems in my way:
1. As per operation guide, when you execute 'Define Selection Criteria', we should see three tab pages. 'Selections', 'Selection criteria' & 'Tables'. But I can see only two in my system i.e 'Selection criteria' & 'Tables'. There is no 'Selection' tab page in my system.
2. Referring to forum Re: BPL: Filtering depending tables , we can use 'Selection Exit'. But can anybody guide me how that can be implemented and attached to the filter / process?
Thanks & Regards,
Audy.

Hi again.
Forum rules do not allow more than one question in the same thread, but anyway...
TDMS BPL works by direct inserts in the database, so functional dependencies are not checked. This means that in VA01 you cannot create a sales order for a customer that does not exist but with BPL you can, though later of course you'll have problems when checking the sales order in VA03 (this is just an example: in practice the sales order context by default also includes the relevant customers). Unlike archiving, where you cannot delete a customer if sales orders for that customer still exist, in TDMS there are no such checks. This means there is really no sequence: in the end everything will be there.
The direct inserts also mean that document numbers are kept the same, so existing objects with the same number are overwritten; check if that is a problem for you.
About the last part of your question: first, don't forget that BPL does not include customizing, so make sure it is already there; second, BPL contexts are designed to include most tables related to a business process, but as you know R/3's data model is quite complex. After the copy you might realize that for your specific process maybe some tables were not considered. In that case I suggest you complain via OSS so that the context can be improved and we all profit.. ;). You must also be careful if you have Z tables that must be added to the context.
Regards,
Rui Dantas

What is the diff b/n Selection Criteria & Parameters in Infoset?

Hi All,
I would like to know what is the difference between Selection Criteria & Parameters which is available in Selections Tab of the Infoset. At the moment i am able to assign values on selection screen by defining the field as Selection Criteria or as Parameter, so not very clear on the difference.
Await inputs.
Vivek

hi Vivek,
You can use the declarative language elements PARAMETERS and SELECT-OPTIONS to generate a default selection screen (screen 1000) with input-ready fields.
In addition to the default selection screen, you can generate additional selection screens with SELECTION-SCREEN BEGIN .... and call them with CALL SELECTION-SCREEN.
You can create variants of a selection screen. A variant is a user-specific selection variant. You would create a screen variant if you frequently start a program with the same selection variants or start in background processing.
The PARAMETERS statement is a declarative language element. As in the case of the DATA statement, you can declare the fields with TYPE or LIKE. The system generates input-ready fields in the selection screen. The names of PARAMETERS fields can be up to 8 characters long. You can maintain selection texts (parameter names) with the function Text elements/Selection texts.
You can set a default value with the DEFAULT addition. If you assign a MEMORY ID , the system uses SAP Memory and the SET/GET parameter to set the default value. If you declare mandatory fields with the OBLIGATORY addition, users cannot leave the selection screen until values have been entered in these fields.
You can also define parameters as checkboxes (AS CHECKBOX). Doing so creates a one-character field that can contain a " "(SPACE) or an "X". You can evaluate the contents of checkboxes using IF/ENDIF control structures.
if u want more information follow the link:
http://abapliveinfo.blogspot.com/2007/12/selection-screens-abap-report.html
Reward points if useful
thanks,
swaroop.

Dealer Portal - Vehicle Sales - Maintain more selection Criteria

Similar Messages

Maybe you are looking for