Dealing with Event Management

Dear All,
Our client - an Indian PSU wants to manage the events ( any show's , special events ) happening on their premises handled by them in SAP .
Kindly suggest the SAP module in which it will suite the best . As there are two modules like - Training and Event Management (HR) and SAP Event Mangement (SCM) under HR and SCM. Which will be the best module for handling Event Mangement .
Suggest me the best with more information if you have come across such a senario's.
Thanks in advance..
Alok

Hello Alok,
SAP Event Management is used for Tracking and Tracing in your Supply Chain. You can e.g. track a container and send out events in case of delays or if a proof of delivery is posted.
More information is available on [SCM |http://service.sap.com/scm] on the right hand side click on Event Management and hava a look e.g. on SAP Event Management 7.0 - Overview
Regards
Berthold

Similar Messages

Changing port configuration with Event Manager

Hello,
I'm trying to change the configuration of a port when the port goes down with EEM.
So when an flex connect access-point is disconnected the port becomes an access-port.
I don't want to use the MAC address.
Does anyone has experience with this.
Below is the applet I'm using.
Thanks in advanced,
Michel
event manager applet CONFIG-ACCESS-PORT
event neighbor-discovery interface regexp "(FastEthernet[0-9]\/[0-9]+)" cdp delete
action 100 regexp "(AIR-LAP)" "$_nd_cdp_platform" value
action 110 if $_regexp_result eq "1"
action 200 cli command "enable"
action 210 cli command "config t"
action 220 cli command "interface $_nd_local_intf_name"
action 240 cli command "switchport mode access"
action 250 cli command "switchport access vlan 20"
action 260 cli command "no switchport trunk encapsulation dot1q"
action 270 cli command "no switchport trunk native vlan 88"
action 280 cli command "no switchport trunk allowed vlan 88,100"
action 290 cli command "spanning-tree portfast"
action 400 syslog msg "EXECUTED EEM APPLET FOR ACCESS-PORT interface $_nd_local_intf_name"
action 500 cli command "end"
action 510 cli command "copy run start"

Hi Evan,
For sure! There is a really good example on the configuration guide, and assciated caveats.
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_0100011.html
Benefits for using LAG is increased bandwidth, and redundancy - especially if you have the two (or more in the case of a 5508 WLC) ports connected to different physical switches, eg a 3750 stack.
Best,
Evan

LabVIEW DSC 8.0 examples that deal with events check for valid timestamp.Why?

Hi folks !
There are examples that come with LabVIEW DSC 8.0 that deal with alarm events, In these examples - DSC Alarms Event Structure Support.vi contained in DSC Alarms Demo.lvproj, for instance - when an alarm event occurs, the code checks for a valid time stamp - 17:00:00.000 31/12/1975. I´m confused, can anyone help me understanding why it´s done?
Thanks !

Hello marc8470,
Each Virtex 5 FPGA bank requires an external voltage reference. The FlexRIO FPGA module provides this reference in the form of Vccoa and Vccob. Because there are two voltage references available on the FlexRIO FPGA module, each Vcco reference is connected to 2 IO banks. The Adapter Module Interface and Protocol chapter of the FlexRIO MDK manual has a table that indicates which GPIO banks are referenced to which Vcco reference. The Vcco levels set in the general section of the adapter module configuration file are not used by the Xilinx compiler, but instead by the fixed FlexRIO logic to configure the external voltage references. The IO standard constraints section of the adapter module configuration file is used during compile to configure the output drivers in the Virtex 5. If the general VccoALevel and VccoBLevel values do not match the IO standard constraints, no error will occur during compile, but the hardware will not be configured correctly during runtime. The logic families used by each general purpose IO (GPIO) line must match that of the Vcco levels set in the general section of the adapter module configuration file. A mismatch in values could result to incorrect behavior or possible damage to the FlexRIO FPGA module or the adapter module.
In the future, please use the email address included in your NI FlexRIO Adapter Module Development Kit (MDK) User Manual to send your questions directly to the FlexRIO MDK support team. This group has experience with specific FlexRIO MDK questions such as this one.
The FlexRIO MDK manual is designed to provide all of the information a hardware designer will need to create a FlexRIO adapter module. National Instruments is always improving and working on new releases of the FlexRIO MDK. Please feel free to use the support email address in the FlexRIO MDK manual to send me any feedback you have on the contents of the manual.
Regards,
Browning G
FlexRIO R&D

Problem with Events Manager: 'slct'

I set up an Events Manager item to run a script whenever the event "Selection" ( 'slct' ) is activated. The script works beautifully and I'm having no problem with the script itself. I am, however, having problems with what happens after the script finishes. I have this problem even if I completely comment out the script or delete everything inside the script file and leave it blank. The purpose of the script is to automate things when I select specific layers. That works and the script has some checks to prevent anything from happening unless one of those specified layers is selected.
The problem is, when I select a tool using the keyboard shortcuts, it will revert back to the previous tool upon the next keypress. It basically acts as if I am using toggle mode for that tool by holding down the key for that tool.
I wiped out my preferences but that did not solve the problem. It makes no difference how my keyboard shortcuts are mapped...either default or user defined. So for an example, here is how some of my keys are mapped:
B-Paintbrush tool
S-Brush Size Increase
So if I'm using the Clone Stamp tool and want to switch to the Paintbrush tool, I will press the "B" key. The tool switches as it's supposed to. If I need to change the size or hardness of the brush, I press one of the corresponding keys...let's say "S" to increase size. When I press "S" nothing will happen until I release that key. Once I do release it, the tool switches back to the Clone Stamp tool. You can get this same effect yourself if you hold down the key of the tool you are switching to (use the toggle mode) and then try to change size/hardness using the keyboard shortcut for that function while still holding that tool's key down.
If I select the tool from the Tools Palette, I do not have this problem. If the tool is selected from within my script, I do not have this problem. The only time I have this problem is when using the keyboard shortcuts to select the tool.
Keep in mind that I have tried this with the script code completely bypassed/erased so no script code actually exedutes. When I turn of the Events Manager or remove the 'slct' item from Events Manager, I do not have this problem at all. If I hold the <SHIFT> key down while selecting the tool, I do not have this problem (this is the same as if you were to hold down the <SHIFT>+<tool key> and press the key to change size/hardness).
To me, it seems as though if there is a 'slct' event item in Events Manager and the keyboard is used to select a tool, Photoshop treats it as if that key is being held down (toggled) until another key is pressed (or even the same key).
If anyone knows how to get around this problem, I would greatly appreciate it. Thank you.

I'm having the same problem where a keystroke (like changing size "[ or "]") will revert to a previous tool rather than change size. Particularly annoying when you left your previously selected eraser slightly larger or smaller than your brush size and don't realize it till you've erased.
So far, from reading across quite a number of forums, it seems the event listener istelf causing the issue
At the moment I've just been thinking of "BB" as my shortcut instead of "B" so when it reverts it reverts back to the brush anyway.
I'll come back if I find a real solution to this annoyance ;P
CS5
Wacom Intuos4
Windows7

Event handling in the Web - Which class/interface deals with event control

Hello all,
When you execute a template (that was created within SAP BEx WAD) in the web browser
and you click on a web item with the cursor then an event is started. In which class or
interface is the event control implemented?
Thanks a lot for any helpful comments!
Anna

Depends on the web item. Check out CLRSRWWW ABAP Classes.

Having an issue with event handling - sql & java

HI all am trying to construct this hybrid of java and mysql. the data comes from a mysql database and I want it to display in the gui. this I have achieved thus far. However I have buttons that sort by surname, first name, ID tag etc....I need event handlers for these buttons but am quite unsure as to how to do it. any help would be much appreciated. Thanks in advance.
/* Student Contact Database GUI
* Phillip Wells
import java.awt.BorderLayout;
// imports java class. All import class statements tell the compiler to use a class that is defined in the Java API.
// Borderlayout is a layout manager that assists GUI layout.
import javax.swing.*;               // imports java class. Swing enables the use of a GUI.
import javax.swing.JOptionPane;     // imports java class. JOptionPane displays messages in a dialog box as opposed to a console window.
import javax.swing.JPanel;          // imports java class. A component of a GUI.
import javax.swing.JFrame;          // imports java class. A component of a GUI.
import javax.swing.JButton;          // imports java class. A component of a GUI.
import javax.swing.JScrollPane;     // imports java class. A component of a GUI.
import javax.swing.JTable;          // imports java class. A component of a GUI.
import java.awt.*;               // imports java class. Similar to Swing but with different components and functions.
import java.awt.event.*;          // imports java class. Deals with events.
import java.awt.event.ActionEvent;     // imports java class. Deals with events.
import java.awt.event.ActionListener;     // imports java class. Deals with events.
import java.sql.*;               // imports java class. Provides API for accessing and processing data stored in a data source.
import java.util.*;               // imports java class. Contains miscellaneous utility classes such as strings.
public class studentContact extends JFrame {     // public class declaration. The �public� statement enables class availability to other java elements.
    private JPanel jContentPane;    // initialises content pane
    private JButton snam, id, fname, exit;     // initialises Jbuttons
    String firstname = "firstname"; //initialises String firstname
     String secondname = "secondname"; //initialises String
    public studentContact() {
        Vector columnNames = new Vector();      // creates new vector object. Vectors are arrays that are expandable.
        Vector data = new Vector();
        initialize();
        try {
            // Connect to the Database
            String driver = "com.mysql.jdbc.Driver"; // connect to JDBC driver
            String url = "jdbc:mysql://localhost/Studentprofiles"; //location of Database
            String userid = "root"; //user logon information for MySQL server
            String password = "";     //logon password for above
            Class.forName(driver); //reference to JDBC connector
            Connection connection = DriverManager.getConnection(url, userid,
                    password);     // initiates connection
            // Read data from a table
            String sql = "Select * from studentprofile order by "+ firstname;
            //SQL query sent to database, orders results by firstname.
            Statement stmt = connection.createStatement
            (ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
            //statement to create connection.
            //Scroll sensitive allows movement forth and back through results.
            //Concur updatable allows updating of database.
            ResultSet rs = stmt.executeQuery(sql); // executes SQL query stated above and sets the results in a table
            ResultSetMetaData md = rs.getMetaData();     // used to get the properties of the columns in a ResultSet object.
            int columns = md.getColumnCount(); //
            for (int i = 1; i <= columns; i++) {
                columnNames.addElement(md.getColumnName(i));     // Get column names
            while (rs.next()) {
                Vector row = new Vector(columns);          // vectors data from table
                for (int i = 1; i <= columns; i++) {
                    row.addElement(rs.getObject(i));     // Get row data
                data.addElement(row);     // adds row data
            rs.close();
            stmt.close();
        } catch (Exception e) {     // catches exceptions
            System.out.println(e);     // prints exception message
        JTable table = new JTable(data, columnNames) {     //constructs JTable
            public Class getColumnClass(int column) {
                for (int row = 0; row < getRowCount(); row++) {
                    Object o = getValueAt(row, column);
                    if (o != null) {
                        return o.getClass();
                return Object.class;
        JScrollPane scrollPane = new JScrollPane( table );          // constructs scrollpane 'table'
        getContentPane().add(new JScrollPane(table), BorderLayout.SOUTH);   //adds table to a scrollpane
    private void initialize() {
        this.setContentPane(getJContentPane());
        this.setTitle("Student Contact Database");     // sets title of table
        ButtonListener b1 = new ButtonListener();     // constructs button listener
        snam = new JButton ("Sort by surname");      // constructs Jbutton
        snam.addActionListener(b1);     // adds action listener
        jContentPane.add(snam);          //adds button to pane
        id = new JButton ("Sort by ID");      // constructs Jbutton
        id.addActionListener(b1);     // adds action listener
        jContentPane.add(id);          //adds button to pane
        fname = new JButton ("Sort by first name");      // constructs Jbutton
        fname.addActionListener(b1);     // adds action listener
        jContentPane.add(fname);          //adds button to pane
        exit = new JButton ("Exit");     // constructs Jbutton
        exit.addActionListener(b1);     // adds action listener
        jContentPane.add(exit);          //adds button to pane
    private JPanel getJContentPane() {
        if (jContentPane == null) {
            jContentPane = new JPanel();          // constructs new panel
            jContentPane.setLayout(new FlowLayout());     // sets new layout manager
        return jContentPane;     // returns Jcontentpane
    private class ButtonListener implements ActionListener {     // create inner class button listener that uses action listener
        public void actionPerformed (ActionEvent e)
            if (e.getSource () == exit)     // adds listener to button exit.
               System.exit(0);     // exits the GUI
            if (e.getSource () == snam)
            if (e.getSource () == id)
            if (e.getSource () == fname)
    public static void main(String[] args) {     // declaration of main method
        studentContact frame = new studentContact();     // constructs new frame
        frame.setDefaultCloseOperation(EXIT_ON_CLOSE);     //exits frame on closing
        frame.setSize(600, 300);          // set size of frame
        frame.setVisible(true);     // displays frame
}p.s. sorry about the untidy comments!

OK, so you've got this code here:
private class ButtonListener implements ActionListener {
public void actionPerformed (ActionEvent e) {
    if (e.getSource () == exit) {
      System.exit(0); // exits the GUI
    if (e.getSource () == snam) {
    if (e.getSource () == id) {
}Perfect fine way to do this; although I think creating anonymous would be a bit cleaner:
snam.addActionListener(new actionListener() {
public void actionPerformed(ActionEvent ae) {
});But I think that the real question you have is "what do I put for logic when the JButtons are hit?", right?
I would answer that you want to dynamically build your SQL statement changing your ordering based on the button.
So you'd have a method that builds the SQL based on what you pass in - so it takes one argument perhaps?
private static final int NAME = 1;
                         ID = 2;
/* ... some code ... */
snam.addActionListener(new actionListener() {
public void actionPerformed(ActionEvent ae) {
    buildSQL(NAME);
/* ... some code ... */
private void buildSQL(int type) {
if ( type == NAME ) {
/* ... build SQL by name ... */
else if ( type == ID ) {
/* ... build SQL by id ... */
}That kind of thing.
Or you might choose to have several build methods with no parameter type; each building the SQL differently, and calling whichever one you need. I did not read your entire pgm, so I don't know how you'd want to organize it. You need to ask more specific questions at that point.
~Bill

Having an issue with event handling - sql database & java gui

HI all, have posted this on another forum but I think this is the correct one to post on. I am trying to construct this hybrid of java and mysql. the data comes from a mysql database and I want it to display in the gui. this I have achieved thus far. However I have buttons that sort by surname, first name, ID tag etc....I need event handlers for these buttons but am quite unsure as to how to do it. any help would be much appreciated. Thanks in advance.
/* Student Contact Database GUI
* Phillip Wells
import java.awt.BorderLayout;
// imports java class. All import class statements tell the compiler to use a class that is defined in the Java API.
// Borderlayout is a layout manager that assists GUI layout.
import javax.swing.*;               // imports java class. Swing enables the use of a GUI.
import javax.swing.JOptionPane;     // imports java class. JOptionPane displays messages in a dialog box as opposed to a console window.
import javax.swing.JPanel;          // imports java class. A component of a GUI.
import javax.swing.JFrame;          // imports java class. A component of a GUI.
import javax.swing.JButton;          // imports java class. A component of a GUI.
import javax.swing.JScrollPane;     // imports java class. A component of a GUI.
import javax.swing.JTable;          // imports java class. A component of a GUI.
import java.awt.*;               // imports java class. Similar to Swing but with different components and functions.
import java.awt.event.*;          // imports java class. Deals with events.
import java.awt.event.ActionEvent;     // imports java class. Deals with events.
import java.awt.event.ActionListener;     // imports java class. Deals with events.
import java.sql.*;               // imports java class. Provides API for accessing and processing data stored in a data source.
import java.util.*;               // imports java class. Contains miscellaneous utility classes such as strings.
public class studentContact extends JFrame {     // public class declaration. The �public� statement enables class availability to other java elements.
private JPanel jContentPane; // initialises content pane
private JButton snam, id, fname, exit; // initialises Jbuttons
String firstname = "firstname"; //initialises String firstname
String secondname = "secondname"; //initialises String
public studentContact() {
Vector columnNames = new Vector();      // creates new vector object. Vectors are arrays that are expandable.
Vector data = new Vector();
initialize();
try {
// Connect to the Database
String driver = "com.mysql.jdbc.Driver"; // connect to JDBC driver
String url = "jdbc:mysql://localhost/Studentprofiles"; //location of Database
String userid = "root"; //user logon information for MySQL server
String password = "";     //logon password for above
Class.forName(driver); //reference to JDBC connector
Connection connection = DriverManager.getConnection(url, userid,
password);     // initiates connection
// Read data from a table
String sql = "Select * from studentprofile order by "+ firstname;
//SQL query sent to database, orders results by firstname.
Statement stmt = connection.createStatement
(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
//statement to create connection.
//Scroll sensitive allows movement forth and back through results.
//Concur updatable allows updating of database.
ResultSet rs = stmt.executeQuery(sql); // executes SQL query stated above and sets the results in a table
ResultSetMetaData md = rs.getMetaData();     // used to get the properties of the columns in a ResultSet object.
int columns = md.getColumnCount(); //
for (int i = 1; i <= columns; i++) {
columnNames.addElement(md.getColumnName(i));     // Get column names
while (rs.next()) {
Vector row = new Vector(columns);          // vectors data from table
for (int i = 1; i <= columns; i++) {
row.addElement(rs.getObject(i));     // Get row data
data.addElement(row);     // adds row data
rs.close();
stmt.close();
} catch (Exception e) {     // catches exceptions
System.out.println(e);     // prints exception message
JTable table = new JTable(data, columnNames) {     //constructs JTable
public Class getColumnClass(int column) {
for (int row = 0; row < getRowCount(); row++) {
Object o = getValueAt(row, column);
if (o != null) {
return o.getClass();
return Object.class;
JScrollPane scrollPane = new JScrollPane( table ); // constructs scrollpane 'table'
getContentPane().add(new JScrollPane(table), BorderLayout.SOUTH); //adds table to a scrollpane
private void initialize() {
this.setContentPane(getJContentPane());
this.setTitle("Student Contact Database");     // sets title of table
ButtonListener b1 = new ButtonListener();     // constructs button listener
snam = new JButton ("Sort by surname");     // constructs Jbutton
snam.addActionListener(b1);     // adds action listener
jContentPane.add(snam);          //adds button to pane
id = new JButton ("Sort by ID");     // constructs Jbutton
id.addActionListener(b1);     // adds action listener
jContentPane.add(id);          //adds button to pane
fname = new JButton ("Sort by first name");     // constructs Jbutton
fname.addActionListener(b1);     // adds action listener
jContentPane.add(fname);          //adds button to pane
exit = new JButton ("Exit");     // constructs Jbutton
exit.addActionListener(b1);     // adds action listener
jContentPane.add(exit);          //adds button to pane
private JPanel getJContentPane() {
if (jContentPane == null) {
jContentPane = new JPanel();          // constructs new panel
jContentPane.setLayout(new FlowLayout());     // sets new layout manager
return jContentPane;     // returns Jcontentpane
private class ButtonListener implements ActionListener {     // create inner class button listener that uses action listener
public void actionPerformed (ActionEvent e)
if (e.getSource () == exit)     // adds listener to button exit.
System.exit(0);     // exits the GUI
if (e.getSource () == snam)
if (e.getSource () == id)
if (e.getSource () == fname)
public static void main(String[] args) {     // declaration of main method
studentContact frame = new studentContact();     // constructs new frame
frame.setDefaultCloseOperation(EXIT_ON_CLOSE);     //exits frame on closing
frame.setSize(600, 300);          // set size of frame
frame.setVisible(true);     // displays frame
}

OK, so you've got this code here:
private class ButtonListener implements ActionListener {
public void actionPerformed (ActionEvent e) {
    if (e.getSource () == exit) {
      System.exit(0); // exits the GUI
    if (e.getSource () == snam) {
    if (e.getSource () == id) {
}Perfect fine way to do this; although I think creating anonymous would be a bit cleaner:
snam.addActionListener(new actionListener() {
public void actionPerformed(ActionEvent ae) {
});But I think that the real question you have is "what do I put for logic when the JButtons are hit?", right?
I would answer that you want to dynamically build your SQL statement changing your ordering based on the button.
So you'd have a method that builds the SQL based on what you pass in - so it takes one argument perhaps?
private static final int NAME = 1;
                         ID = 2;
/* ... some code ... */
snam.addActionListener(new actionListener() {
public void actionPerformed(ActionEvent ae) {
    buildSQL(NAME);
/* ... some code ... */
private void buildSQL(int type) {
if ( type == NAME ) {
/* ... build SQL by name ... */
else if ( type == ID ) {
/* ... build SQL by id ... */
}That kind of thing.
Or you might choose to have several build methods with no parameter type; each building the SQL differently, and calling whichever one you need. I did not read your entire pgm, so I don't know how you'd want to organize it. You need to ask more specific questions at that point.
~Bill

Event Management - How to Use?

Hello,
I need some help with event management. This tab is not available on my Adobe Connect and I am wondering how I can enable it. I need to promote my event with emails, as well as create a custom landing page, which I know can be done since it was something I had available to me in my free trial. It seems I might need to change my role to admin but I am not able to do this. Can anyone help me out with this? I have already spoken with 10 customer service reps and they have not been able to assist me.

Contact your reseller, as they can get you the Events module.
If you don't have a reseller, feel free to PM me or contact me off forum jorma[at]realeyes.com

Event Manager Solution.

Hi Guru's,
What is Event Manager Solution? What exactly we do there? Can you provide me some documentation as my new project involves me to work with event manager solution and SCM. Pls provide me ur insights as this will benifit me to the maximum extent.If you have an documentation pls mail to [email protected]
Thanks in anticipation.
vpk

hi
check this
http://help.sap.com/saphelp_scm50/helpdata/en/e4/bd6c3cf4bc184ce10000000a11405a/frameset.htm

Batch processing with Script Events Manager

Hello all,
I use the Script Events Manager to run a group of actions on a single file during the file open event.
This workflow works well when dealing with a small quantity of files.
Is there an efficient way to apply simultaneously a group of actions to folder of images?
The PSCC Batch processor, Image Processor and Image Processor Pro only allow the use of one action at a time.
I have try creating a combo action which includes a group of actions to run in the Batch Processor and Image Processor.
When doing so I receive an error message from the Image processor and dialogs that from the Batch processor that suspend
the program activity. I have had no luck with a combo droplet as well.

My system has 8 Gb of Ram and 4 processors. I doubt it's the system. I've had problems with CS Master Collection since day one. My main complaint is the ******* tabs and interface. Everything is so chunky. CS2 was smooth as butter. They keep making their products use more RAM and it's ridiculous. The tabs don't help, they only make life harder.
Thanks for the suggestions, I was hoping not to have to reinstall PS, but looks like it's the only option.

Training and Event Management Integration with FICO

How Training & Event Management is integrated with FICO?
How it will be integrated and where?
Could you please put it in simple way?

Hi Rajesh,
Cost allocation:
Here it is possible to charge an employeeu2019s cost center with the fee for attending a business event (e.g. training course, workshop). The business event organizeru2019s cost center will be credited and the attendeeu2019s cost center will be debited.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
The costs incurred from actually holding a business event can be transferred from the resources cost center to the business event organizeru2019s cost.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
In SAP Configuration:
Training and Event Management > Integration->Billing and activity Allocation-->Activity Allocation and cost transfer posting.
Please do above configuration and create business events with or without resourses, in that you can maintain cost centre to post the expenditures .
Bhairavareddy

Issue with recent "iPhoto Videos" not showing up in "Event Manager"

It has been awhile since I used iMovie '11 on my MacBook Pro with Retina Display. I believe the last time I used it was in September or October of last year (2012) as most of my editing I have been doing on the iMovie iOS app as it has been sufficient for the majority of my needs. I was running low on storage on my iPhone this past weekend and so transferred off all my videos to iPhoto.
I had need to edit some of the clips I transferred off and imported in iPhoto yesterday and so went to iMovie on the Mac to do so. It had to process the new files and then it upgraded the thumbnails to high resolution images and it was then I noticed that it did not recognize any movies after September of 2012 in the "iPhoto Videos" section of the "Event Manager." I was able to go into iPhoto and locate the more current videos to insure they were there and that they worked (I was worried at first they did not transfer off and just deleted or were corrupt in some manner). I have tried restarting iMovie, rebooting the Mac, etc. and nothing seems to work. Oddly enough, I can manually import the iPhoto files and iMovie finds them that way and they do work when manually imported. For whatever reason they just do not appear in the "iPhoto Videos" section of the "Event Manager." I am hoping someone here has an idea on why the Mac seemingly decided to stop recognizing videos after a certain date (September 2012 as is the case here) and how I can go about resolving the issue.

calbe wrote:
Hi Folks,
Your iPhoto access in other programs such as iMovie depend on ~/library/preferences/com.apple.iApps.plist. Whenever you add new videos to iPhoto and close iPhoto, this file gets updated. If corrupted, pull the plist, open iPhoto and a new movie and then quit. See if iMovie picks it up.
As long as you have the latest dot release, I believe you should be fine in compatibility.
Calbe
I had this problem and this fixed it. The problem started for me right after I upgraded iPhoto 9.4.1 to 9.4.2. I had to quit both apps, remove the plist file, launch iPhoto, then quit iPhoto, then launch iMovie... then iMovie asked about thumnails for videos and the iPhoto videos were back in iMovie.

How to deal with my event in DataAction?

There is a button in my uix,which tiggers an event like this:
<form name="form0" method="post" >
<submitButton event="login" text="login" />
</form>
<event name="login">
<struts:action path="loginDataAction.do" />
</event>
I want to deal with the login event in loginDataAction .So I wrote a Class :
package vps.view;
import java.io.IOException;
import javax.servlet.ServletException;
import java.util.Map;
import javax.servlet.http.HttpServletRequest;
import oracle.adf.controller.struts.actions.DataAction;
import oracle.adf.controller.struts.actions.DataActionContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import org.apache.struts.action.ActionErrors;
import org.apache.struts.action.ActionForward;
public class LoginDataAction extends DataAction
protected ActionForward findForward(DataActionContext actionContext) throws IOException, ServletException
HttpServletRequest request = actionContext.getHttpServletRequest();
Object s = request.getParameter("login");
if (s != null)
if (this.hasErrors(actionContext))
return actionContext.getActionMapping().findForward("login");
else
return actionContext.getActionMapping().findForward("success");
return super.findForward(actionContext);
protected void invokeCustomMethod(DataActionContext actionContext)
// TODO: Override this oracle.adf.controller.struts.actions.DataAction method
HttpServletRequest request = actionContext.getHttpServletRequest();
Object s = request.getParameter("login");
if (s == null)
super.invokeCustomMethod(actionContext);
but it does not work .
Please help me .thanks a lot.

I think my code is wrong. it should be :
public class LoginDataAction extends DataAction
protected ActionForward findForward(DataActionContext actionContext) throws IOException, ServletException
HttpServletRequest request = actionContext.getHttpServletRequest();
Object oUserName = request.getParameter("username");
Object oPassWord = request.getParameter("password");
if (oUserName != null && oPassWord != null)
if (this.hasErrors(actionContext))
return actionContext.getActionMapping().findForward("success");
else
String strUserName = oUserName.toString();
String strPassWord = oPassWord.toString();
ActionForward afThis = actionContext.getActionMapping().findForward("login");
return afThis;
return super.findForward(actionContext);
protected void invokeCustomMethod(DataActionContext actionContext)
// TODO: Override this oracle.adf.controller.struts.actions.DataAction method
HttpServletRequest request = actionContext.getHttpServletRequest();
Object s = request.getParameter("login");
if (s == null)
super.invokeCustomMethod(actionContext);
}

Problem with Embedded Event Manager and Object Tracking

Hi,
I have a 2801 running c2801-advipservicesk9-mz.124-24.T2.bin. It has the following configuration:
track 300 list boolean or
object 10
object 11
object 12
object 13
event manager applet clear_ipsec_tunnel
event track 300 state down
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
My problem is that after the tracked object number 300 transitions from an up state to a down state, nothing happens. It seems like the applet doesn't work with object tracking. Here's what I see in logs:
Dec 7 21:52:32.236 MCK: %TRACKING-5-STATE: 12 ip sla 12 reachability Up->Down
Dec 7 21:52:37.236 MCK: %TRACKING-5-STATE: 13 ip sla 13 reachability Up->Down
Dec 7 21:52:57.236 MCK: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
Dec 7 21:53:07.236 MCK: %TRACKING-5-STATE: 11 ip sla 11 reachability Up->Down
Dec 7 21:53:07.996 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
That's it. For some reason, the applet won't execute the CLI commands when the EEM applet is triggered. Am I doing something wrong or I have encountered some bug? Thanks.

jclarke,
Today I added the router into the tacacs server database and the applet started working just fine by using my login name. So the working configuration looks like this:
event manager session cli username "my login name"
event manager applet clear_ipsec_tunnel
event track 300 state down maxrun 30
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
Then I tried to use a login name from the local database that has "privelege 15" access and of course the debug output showed me this:
Dec 8 18:12:58.203 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
Dec 8 18:12:58.203 MCK: fh_track_object_changed: Track notification 300 state down
Dec 8 18:12:58.203 MCK: fh_fd_track_event_match: track ED pubinfo enqueue rc = 0
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: msg_type=64
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: sval=0
Dec 8 18:12:58.219 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_open called.
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>enable
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Command authorization failed.
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>clear crypto session
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : ^
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : % Invalid input detected at '^' marker.
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel: IPSec tunnel has been cleared by clear_ipsec_tunnel applet
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_close called.
So I guess this problem arises when you have command authorization enabled and the tacacs server is not reachable or something like that. I have tried to find a way to use the local database instead of using the aaa server but didn't succeed. Although I have found an interesting workaround. Here it is:
Link: http://blog.ioshints.info/2007/05/command-authorization-fails-with-eem.html
Workaround found after reading the "Executing IOS commands from Tcl shell" from the "Tclsh on Cisco IOS tutorial".
On the above article it is mentionned that the ios_config command is executed inside the context of another VTY line (also found with the AAA debug). The workaround is to define the FIRST VTY line with "transport input none" to prevent ssh or telnet to grab it and to configure the aaa authorization without any command authorization for this line.
Kind regards
Christian Chautems
Looks great, but I am not quite sure how to "configure the aaa authorization without any command authorization for this line".
Anyway, jclarke thank you so much for taking your time to look into my problem and for your help.

Problem with Script Events Manager buttons not showing up

Hi,
First off let me say that the latest release of Adobe products is a steaming pile of @#$#$.
Countless software issues, it's slow, buggy, you name it.
That being said, has anyone had this problem and know how to fix it.
My Script Events Manager is broken. Yes broken. The only buttons I see are "Done" and "Remove". There is no "Add" button so that I can actually add events. Someone please tell me this is user error and that I don't need to reinstall PS.

My system has 8 Gb of Ram and 4 processors. I doubt it's the system. I've had problems with CS Master Collection since day one. My main complaint is the ******* tabs and interface. Everything is so chunky. CS2 was smooth as butter. They keep making their products use more RAM and it's ridiculous. The tabs don't help, they only make life harder.
Thanks for the suggestions, I was hoping not to have to reinstall PS, but looks like it's the only option.

Dealing with Event Management

Similar Messages

Maybe you are looking for