Dealing with multiple pages in Pages

While constructing a document, writing at the bottom of the page will continue the text onto a new page. However, if viewing these multiple pages in the sidebar, you'll notice they are grouped together (highlighted by a yellow box) and they cannot be rearranged. Pages does something silly and rearranges these pages as a group rather than single pages - For instance, if I wanted to move page 2 above page 1 you would normally drag page 2 above page 1, but they are grouped so it is impossible to do so.
Anyone know of a workaround for this?

Hi Tyler,
You are working in a document that began life as a Word Processing Template, or as a Word import.
The yellow box identifies a Section. Only Sections can be rearranged by dragging. The Page Thumbnail icons are only there to give you a sense of the size of the Section and to allow you to jump to a page by clicking on the icon.
It would normally not make any sense to rearrange pages as it would mess up the text flow. Therefore you Select the content of a Page, Copy it, place your text insertion cursor where the want the copied content to go and Paste.
Jerry

Similar Messages

How to deal with multiple pages of smart forms

Hi everyone,
i have two pages in smartforms but whenever i show smart form through my program only first page is shown not the second one. i tried with next page attribute of both pages but no resolution.
thanks alot in advance

Which solution did you choose ?
(1) main window on the two pages
- The first page contains the main window, and its next-page attribute is the second page
- The second contains the main windows, and its next-page attribute is itself
- The main windows
- - Begins with nodes to print on first page
- - Then a command node force end-of-page
- - Then some nodes and a table node that are to be printed on second page
(2) main window only on second page
- The first page do not contain the main window, and its next-page attribute is the second page
- The second contains the main windows, and its next-page attribute is itself
- The main windows
- - Some nodes and a table node that are to be printed on second page
Regards,
Raymond

Print to pdf often doesn't work with multiple pages?

When I try to print to pdf, it often doesn't work right.
I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
Mark

It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
http://discussions.apple.com/message.jspa?messageID=1983431#1983431

How do I create a single PDF file with multiple pages?

Hi, I occasionally need merge several jpg images into a single pdf file with multiple pages (one Jpg per page). I have tried doing this on Preview, and by selecting all the pages I want to include in my document and trying to save to Pdf through the "Print" function, but every time it only saves the first page.
Can anyone tell me if there is a way to save multple-page pdf files without having to purchase a specific program (i to this too infrequently to justify the cost)?
Thanks very much,

This works for me...
Open first image in Preview View > Sidebar. Drag the other images into Sidebar, then select all.
From File menu > print selected images. Choose PDF > Save as PDF
-mj

How can you develop photo galleries with multiple pages using the web module?

Going through the web module I can see there are many options for developing a web page with a single collection of photos. How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

This thread will give you several ideas.
Re: How do you embed a gallery into an existing website?

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Split TIF document with multiple pages

Hi,
Iu2019m using function module 'SCMS_HTTP_GET' to retrieve TIF document from Filenet. The TIF document returned has multiple pages. Iu2019m able to retrieve the document with no issue. What I need to do is split the TIF document for each page.
Is there a way in ABAP to split the TIF on each page break?
The reason I need to split is later in program I call FM SSFC_BASE64_ENCODE passing data to Adobe form that uses IMAGE FIELD object to display TIF. I have no issue displaying TIF with 1 page on adobe form. But if there are multiple pages only the first page is displayed in the Adobe PDF. I was thinking if I could split the TIF that contains multiple page into individual TIF I would then pass in table to PDF form to display all pages of the TIF.
Appreciate the help,
Gary

Hi,
I'm also in the same situation. I am uploading the TIf file with multiple pages, but only the first page is printing. Did you get any luck in either printing all pages OR program which can spilt...
Thanks,
Sarma

Open a PDF file in illustrator with multiple pages CS6

Hi all,
Maybe someone could tell me if this feature is already available...
I really need to use this feature... maybe someone has a Idea? i need to translate and edit a PDF file that was original designed by our factory... they had hired a company to make the documentation but the company did go bankrupt so we can't get the original files en need the edit the compressed PDF File...
I Hope someone could help me...
Greetz
Leroy

hi,
16 PDF Files with 4 pages Each..
don’t know what kind of text it is…
about image quality… if there is a method to editing of the PDF .. then I could Replace the Images …
Van: Monika Gause [email protected]
Verzonden: woensdag 22 augustus 2012 13:31
Aan: AcidusW01
Onderwerp: Open a PDF file in illustrator with multiple pages CS6
Re: Open a PDF file in illustrator with multiple pages CS6
created by Monika Gause <http://forums.adobe.com/people/Monika+Gause> in Illustrator - View the full discussion <http://forums.adobe.com/message/4639138#4639138

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)

When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?

Best way to design website with multiple pages

In dreamweaver what are your suggestions to create a full website with multiple pages where each page has a different but similar setup. I'd have a similar theme but I don't want each page to be exactly the same as the home page? I've tried a template but that was a nightmare since some of my pages were different from the original page and i had to mess with it to fix it.I've also made the home page, saved the html file in my website root folder then changed that page into the second page and saved it as another html file. I have thought about using pre-made templates and designs but I kind of want to design from my own creative viewpoint.
your ideas are appreciated, advice welcome.

Templates do make your life much easier. I use the following scheme....
First, I mentally separate the page layout into three sections:
1. Stuff that will not change for the life of the site (i.e., the basic
structural elements)
2. Stuff that *could* change from time to time (e.g., navigation elements,
burst advertisements, section-specific navigation, etc.)
3. Stuff that *will* change from one page to the next
Then I create a template containing all class1 elements. Next I create
server-side include files containing all class 2 elements and place them on
the template as needed. Note - some of the class 2 elements may be
"section-specific elements", and their placement on the template will be
subject to the next item. Finally, I insert editable regions to cover the
class 3 items, INCLUDING the section-specific navigation.
This allows me to just cookie-cut the rest of the site. I estimate that
even for fairly large sites, about 80% of my work goes into planning and
creating this template file.
To handle pages that have substantially different layouts I just change the CSS on those pages, and leave the Template alone.

Fillable form with multiple pages

I have a fillable form with multiple pages. However, when I save it and open it, it tabs to the end of the first page and will go back up to the top of the first page again. It won't tab to the second page. Instead, the user will have to click there cursor into the first field of the second page, tab through that, and repeat this process from page to page. If the person doesn't know there are multiple pages, they may believe they have finished the form once they get to the bottom of the first page, hit tab, and it takes them back up to the first field on the first page again. How can I make it go from the last field on the first page, tab, and first field on the second page?

Thanks for the reply. Since my post to this topic I discovered some things about tabbing. With out adding another master page but just keeping the one and making sure that it's occurance is set to a minimum of one and including master page in the numbering it will work as long as the order of fields in the hierarchy tab matches the order in the position of the fields.
I have a subForm that has a row of fields starting with a button then several text fields. I couldn't tab to the next page because the button was at the bottom of the hierarchy and it wasn't until I moved it to the top that I could finally tab to the next field on the next page. I also discovered that with a one page dynamic interactive form that has some expand able text fields in it and when the field expands so that any fields are pushed to a new second page tabbing seems to not work. In other words when I tab out of that field that is suppose to expand and a new page is added to the form the tabbing quits and in order for it to resume I have to click in a field and from then on it work even if it gets to where a third page and so forth is added. It is just when a one page (in my case) form turns into multiple pages for the first time.
Hope that makes sense.

Smart form problem with multiple pages & table problem

Hi experts,
I have a problem with my smart form with multiple pages
Situation: I have a smart form that ALWAYS has at least 2 pages. In one page the quotation, in the second page (basically this is the 3rd page as the 2nd page is optional) the terms and conditions. Sometimes however, when there are many items in the quotation more than 1 page is needed for the quotation.
The (optional) second page of a quotation has a different header than the first page of a quotation. So I made a second page with 2 secondary windows (where the header texts are in). The main window is after the secondary windows and has to finish the quotation.
The problem is that my headers of the second page are never printed, it stays a blank space. The table however does continue and is printed.
Another problem I have is that I have a table (with the quotations) with 6 columns. The first 2 columns are displayed correctly but once the 3rd column the columns are shown on a lign below.
Regards,
PJ

I would suggest another approach to this problem.
Use just one page. For the headers on the first page, use a secondary window and on the conditions tab, choose the additional event - Only on First Page.
For the different header on the second page, create another secondary window on the same page (probably even overlapping the first header on your layout). But in this one, on the conditions tab, choose the additional event - Not on First Page.
The table should flow as you would be using the Main window for this one.
As for columns, if they are too wide and wont fit in the same line, it would move to the next line. So you would have to re-adjust the line width and test.
Hope this resolves your problem.
Regards,
Ancy
Edited by: abapfreak on Oct 4, 2010 11:52 AM

Howto deal with multiple source files having the same filename...?

Ahoi again.
I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
The svn.connector consists (among other things) of two files which are named the same:
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
But of course I would prefer a nicer solution to this problem if possible. ^^
TIA!
G_Syme

Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
OK, I've filed a bug report and have also included a suggestion how to solve this problem.

How do i deal with multiple iPhoto libraries when migrating to Photos

how do i deal with multiple iPhoto libraries when migrating to Photos

I would merge them before the migration. Also, spend some time doing any batch changes of names and dates beforehand too.
iPhoto Library Manager has good merge and duplicate search facilities.
http://www.fatcatsoftware.com/iplm/

How to deal with multiple disk path's

hi
i'm setting up a new server with virtual servers with extra io domain's
now i have a question on how to deal with multiple disk path's
so following questions:
- can i enable multipath on the primary and on the alternate domain?
i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
- if i can't enable multipathing how to handle this
for example a disk has on the primary domain 4 path's to a disk
do i then assign all 4 path's to a virtual disk server or do i create a virtual disk server per path
if i do the first is adding all the path to the same mpgroup enough or not

Hello
1.-can i enable multipath on the primary and on the alternate domain? Yes. i understand for multipath mpxio or similar.
2.-i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
if you are going to use alternate domain you have to give this IO the all bus root nexus, what you describe sounds like DIO,
3.- - if i can't enable multipathing how to handle this for example a disk has on the primary domain 4 path's to a disk
If you have 4 path to the same disk in the primary and you are using multipath let's say mpxio, then you will have only one disk in the primary, which is a virtual device that handle the 4 paths. That's is what you have to use in a vds.
Please check this doc to see the best practice to ldom
white-paper-ldom
regards
eze

Dealing with multiple pages in Pages

Similar Messages

Maybe you are looking for