Dealing with multiples windows within a session (servlets & JSPs)

Hi,
How can I show multiple windows during a session and avoid terminating the current session when one of those windows is closed?
I have a main window through which the client navigates from page to page using servlets and JSPs. But if he opens the help window (via a <a href ... target="_blank"> and then closes the help window, the session is lost and the server doesn't recognizes the client anymore and creates a new session.
Can someone help?
Jean Vaillancourt, Montrial

Hallo,
how long is session-timeout and what do u do in your application ??
Sanjay

Similar Messages

  • ITunes setup on a NAS with multiple windows users - how?

    iTunes setup on a NAS with multiple windows users?
    I am very confused on what is the best way to handle this setup for my friends family.  Any help would be appreciated.  Sorry in advance as I know this is a long winded post - I have a feeling this will help others faced with the same issues or questions.
    CURRENT SETUP
    I have three new Windows 7 machines networked (two desktops and one laptop) that have four users on each - as busy family with children who need the computers for homework, projects, games, etc...  The goal of this setup is that any user can log onto any computer and have there documents available to them no matter computer was free to use.  I set this up using the library function in Windows 7 and seems to work pretty well.
    I have put a Buffalo Linkstation NAS on the system as well.  This was going to serve two purposes 1)  run some backup software to protect the computers and 2) consolidate the iTunes content in one place for all users.  There is also an iPad in the home that I should would be better served by accessing the content on the NAS without requiring any of the computers being on.  Dave is thinking about getting some other playback devices like Apple TV so thought a NAS would be a good way to go.
    CURRENT ITUNES SETUP - I have created a new iTunes library on the NAS by holding the SHIFT button down while starting iTunes and pointed to that folder on a Share on the NAS.  There was no music on the system at the time as we are planning to copy this over from an OLD machine that is now not being used.  I have also authorized all the computers and turned on the home sharing feature (although I am not sure what good that does).
    This “shift” button trick seesm to also point the default directory there without point to it in the advanced setup tab of iTunes.
    I then synced one of the iPods with purchased content on it and synced that to the library after asking me to do so before an update.  All the content showed up in the library and was playable - awesome.
    I then logged into each user on each machine (yikes) and installed iTunes  and used the “shift” trick to connect each users iTunes to the database on the NAS.  Everything seems to work - but I have not tested it thoroughly.
    SUMMARY
    3 new Windwos 7 networked machines
    4 identical users on each machine
    1 TB Buffalo linkstation
    iTunes setup with the folder on a SHARE
    all user’s itunes connected to the iTunes folder on the NAS
    all computers authorized with home sharing turned on.
    one iTunes user account signed in on each machine
    multiple iPods and one iPad in the system
    QUESTIONS/CONCERNS
    Is there a better way to do this on a NAS?
    Would home sharing be better in some way?
    I understand the NAS should show up under the shared section in iTunes - I assume that would mean that would mean each user has an iTunes library on their documents?
    I have read that there may be corruption issues if users on the different machines try to access iTunes at the same time.
    Will there be any issues syncing that various iPods with?
    Ugh - sorry for the long post and all the questions.  I am just trying to find the best way to do this.  I wish Apple would put out a best practices document for setups like this.  Thanks in advance.

    This is a user to user support forum. Your fellow users can offer solutions or workarounds based on their experience with the application. If you think it should work differently drop a line to iTunes Feedback.
    For reasons unknown Apple haven't chosen to allow iTunes to be suspended in one profile and active in another. My recollection is that this applies even if each profile has a different library, although it is some time since I've committed a personal test.
    I'm not sure why my suggestion make less sense that your current approach?. As I understand it currently everybody is either signed into their own account when they can do something other than work with iTunes, or they sign into the special iTunes account where they can't access any of their other stuff. You don't have to disable fast user switching. Follow exactly the same steps, but make sure everyone closes iTunes before turning the computer over to another user. Disabling fast user switching helps to enforce that action.
    tt2

  • Howto deal with multiple source files having the same filename...?

    Ahoi again.
    I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
    Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
    The svn.connector consists (among other things) of two files which are named the same:
    http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
    http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
    At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
    Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
    The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
    But of course I would prefer a nicer solution to this problem if possible. ^^
    TIA!
    G_Syme

    Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
    OK, I've filed a bug report and have also included a suggestion how to solve this problem.

  • Safari is now opening with multiple windows. Not sure what changed in my settings. I prefer Safari to open with a single homepage, which I've always set to Yahoo. Any help?

    Safari is has begun opening with multiple windows. Not sure how this change happened. I prefer Safari to open with a single homepage, which I've always set to Yahoo. Any suggestions?

    Quit the application. Force quit if necessary.
    Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
    Safari ▹ Preferences... ▹ General ▹ New windows open with: Homepage

  • How do i deal with multiple iPhoto libraries when migrating to Photos

    how do i deal with multiple iPhoto libraries when migrating to Photos

    I would merge them before the migration.  Also, spend some time doing any batch changes of names and dates beforehand too.
    iPhoto Library Manager has good merge and duplicate search facilities.
    http://www.fatcatsoftware.com/iplm/

  • Reg:working with multiple windows in webdynpro-abap

    Hi ,
    How can we create multiple windows and how can we link them...
    suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
    Thanks & Regards
    Suman Puthadi

    Hi
    As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
    Hope its clear to you...
    Even you can read this post when ever you get time Read before posting
    Regards
    Ayyapparaj

  • Multiple forms in multiple windows within application

    hi,
    our user wants to be able to open more than one form in multiple windows within the application and have them within the application window at the same time. we are planning to use open_form instead of call_form to do this. however open_form does not let me specify the query mode, so i guess will have to do that manually? what does Oracle recommend as a best practice for applications - to support mutliple windows or not? if yes, as call_form or open_form?
    thanks.

    Yes using open form you will have to manually (in code) switch into Query Mode.
    We recommend Open Form over call form as it is more memory efficient, of course there are situations when the behaviour of Call Form is useful but generally I'd encorage the use of open.

  • How to deal with multiple disk path's

    hi
    i'm setting up a new server with virtual servers with extra io domain's
    now i have a question on how to deal with multiple disk path's
    so following questions:
    - can i enable multipath on the primary and on the alternate domain?
    i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
    - if i can't enable multipathing how to handle this
    for example a disk has on the primary domain 4 path's to a disk
    do  i then assign all 4 path's to a virtual disk server or do i create a virtual disk server per path
    if i do the first is adding all the path to the same mpgroup enough or not

    Hello
    1.-can i enable multipath on the primary and on the alternate domain?  Yes. i understand for multipath mpxio or similar.
    2.-i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
    if you are going to use alternate domain you have to give this IO the all bus root nexus, what you describe sounds like DIO,
    3.- - if i can't enable multipathing how to handle this for example a disk has on the primary domain 4 path's to a disk
    If you have 4 path to the same disk in the primary and you are using multipath let's say mpxio, then you will have only one disk in the primary, which is a virtual device that handle the 4 paths.  That's is what you have to use in a vds.
    Please check this doc to see the best practice to ldom
    white-paper-ldom
    regards
    eze

  • Whats the current deal with popup windows in flash?

    Hi There,
    whats the current deal with popup windows in flash? I'm
    trying to include popup windows in a site, and with IE7 (or
    whatever the newest version of IE is ..the firefox lookalike) the
    popups are not working at all, I have gone out a gotten other
    sample popup scripts and I encountering the same problem, which is
    the popups aren't working at all?
    Is this a problem with just IE7 or am i completely missing
    out on something here?
    any ideas would be really appreciated! or if anyone has any
    scripts for sizeable popup windows that work on IE7 i would really
    appreciate it. thanks
    :}

    well i have used a couple of different attempts. I have used
    code generated by this:
    http://www.flash-db.com/PopUp/
    on (release) {
    getURL
    ("javascript:NewWindow=window.open('pants.html','newWin','width=200,height=50,left=0,top= 0,toolbar=No,location=No,scrollbars=No,status=No,resizable=No,fullscreen=No');
    void(0);");
    I have also tried a couple of other tutorials from
    http://www.kirupa.com
    link;
    http://www.kirupa.com/kirupa.htm'
    and I used the javascript supplied and had no luck (I
    embedded the html etc) ... i have tried about 5 other tutorials and
    I've got to the point where I'm wondering is the problem based
    around by browser, I only using IE7 and have no ther browser. I'm
    using FlashMX 2004. all the example files .fla and swfs i have
    downloaded aren't working either so I'm totaly scartching my head
    at this point...
    any ideas where i'm going wrong here? any help very much
    appreciated
    :}

  • Is there a way to get firefox to warn me when exiting with multiple windows open?

    When I click File > Exit in the menu, I want firefox to warn me if I have multiple windows open.
    I don't want it to warn me about multiple tabs though.
    Is there a way to get it to do that?
    I would prefer to just hit the red X in the top right corner, which would avoid this problem, However, if it is the only firefox window I have open, then the red X will often not properly shut down firefox exe, so next time I try to launch firefox it won't work and I have to end task on firefox exe! I was told to use File Exit to improve the chances that firefox will properly close, but doing so introduces this new issue.
    thanks

    That doesn't work.
    Once I set it to true, if I have one window open with multiple tabs, and try to exit, it comes up with a warning box, which I don't want.
    Then if I check it to say 'don't show this again', the next time I run firefox the showQuitwarning setting has been set back to false. So then when I have multiple windows open and I file exit, all firefox shuts down with no warning.
    The reason I want this is because I can *see* the tabs of the window I am in when I am clicking on file|exit, so visually, I'm not going to close anything that I didn't mean to close because it's right there visible to me at the top of the screen (the tabs are seen at the top of the screen) in the same area as where I am looking at and clicking File Exit.
    But other firefox windows are not visible up there so it is easy to forget that they are open, since a lot of times I don't have any other windows open (if I *always* had other windows open then I would not forget them and be in more of a practice of checking the taskbar for them)
    And this is all because I can't hit the red X in the top right corner without increasing the odds of hung firefox processes that don't truly exit (thus making me unable to start another session later without Ending Task which isn't good).
    The hanging is daily but random and not reproducible, so it's very difficult to troubleshoot or fix.

  • How to deal with multiple language SQL script?

    Hi All,
    We now want to create a SQL script that contains multiple languages(English, Chinese, Japanese), this script need to be run at there different database installed on different OS, for example, Oracle9i on Windows 2000 English Edition/Chinese Edition/Japanese Edition.
    If I save the file as ANSI format, this file will only be recognized at local OS(e.g. the Chinese and Japanese character will not be normally displayed on other OS, if I run the script, the CH/JP characters will not be stored normally in DB).
    If I save the file as Unicode format, this file can be recognized by all three OS, but Oracle SQL Plus will not recognize it, thus we can't run the script.
    Who can tell me how to deal with this issue? Is it possible to save only one script that can run on different language OS?
    Thanks,
    Spark

    Hi,
    The ISQLplus supports multiple languages, but there will be following problems for my case:
    1.ISQLplus don't support Unicode format script too, so I must save the file as ANSI format.
    2.To display the characters normally depends on the database server's platform. I create a script contain three languages with ANSI format in Chinese OS, but if I want to load this script to database server installed on English OS via ISQLplus, the Chinese characters will not be displayed normally too.
    PS:
    So, I think this is not only related with Oracle but also the Windows OS, it is hard to create one file with ANSI format that can be displayed normally in different platforms.
    Thank you all the same,
    Spark

  • How to create a VI with multiple windows/displays?

    Hi, I'm new to LabVIEW and just trying to increase my understanding so please bear with me.I want to write a VI where the user is presented with a series of windows and depending on the button, different windows are displayed. What would be the best way to implement this? Is there a way to change the Front Panel all in one VI? Or would it be better to do it using SubVIs? Or separate VIs for each window? I've looked at the Open VI Reference and Invoke Node VIs and can see a possible implementation that way, but I'm still curious if this is the best way. I also considered using tabs, but I want the different "windows" to be unique and not tabs. By "windows" I mean when the user clicks a button, a completely different Front Panel is displayed and the previous one is hidden/closed. Thanks for any help.

    First.  Yes the property "FP Open" is writable during run time.  So you can programatically show and hide the front panels of several sub vis that your main "launcher" can control.  Another option is to launch sub-vis that are "Modal" so that they act like dialog pop-ups and float to the top until the user performs some action that closes the sub-vi execution.  Personally I use this method frequently for actions like setting test options, selecting test vectors or displaying error information to the user.
    But I do want to add a caution,  Make sure your user can understand what is going on!  By that I mean that you must take into account that most applications have one main interface and, your user is used to this behavior in the applications that they run, so this MUST affect your UI design.  Unless you want all of your users to start using the phrase "Well, this is a sdsdsding mess!" you can't get very far away from the typical application UI paradigm.  If I ran an app that changed panels, and kept closing where I came from, throughout its normal functions I would become frustrated as a user.  As the Developer of that App I would know how I coded it and therefore the switching would make sense to me but, the target user is the person that must deal with it.  (And you never know when even the code you develop as a "development aid" will have reuse potential and need to be adapted for a large target  audience).
    Jeff

  • How to deal with multiple hard drives?

    I am using Aperture 1.5 but am having trouble
    dealing with the Library structure. I want to be able to have Aperture recognize and work with Projects located on several different external hard drives. Where should the main library be located? In 1.5 is there such a thing anymore as a Branch library? I had a branch library on an external drive. I may have messed things up so that Aperture doesn't quite know where things are. Is there a way to re-organize things so that when I open Aperture ALL the projects I've worked with do appear? Thanks.

    To have Aperture work with projects on different hard drives, just import the project files but tell Aperture to copy the files from their current location (say a media card or CD) to a directory of your choice on any drive of your choice. You can store projects on multiple drives. I don't think it matters where the main library is located, it could be on your primary drive, or on one of your external hard drives. I'm not sure how to consolidate projects that were enclosed in different libraries other than to export the projects individually, and then reimport them into the new centralized library. I do wish Aperture would allow one multiple select projects (it only allows you to select one at a time) for exporting. I also wish that Aperture had a 'Consolidate Libraries' command which would allow one to just pull all 'found' projects into one library.
    Dual 2.7 GHz 5.5 Gig RAM   Mac OS X (10.4.6)  

  • Modal alert with multiple windows?

    Has anyone been successful in building a modal alert when they have multiple windows opened? Is it possible?

    I have a flex application running multiple windows. I would like to show an alert which would prevent the user from doing anything in the application until the Alert is acknowledged. The mx.controls.Alert class can only be modal to a single window and not the entire application.
    I have found this, I am going to give it a shot and see how it goes: http://labs.flexperiments.nl/a-real-native-alert-for-flex-air/

  • SQL Dealing with multiple choice answers in a DB with no unique identifier

    I am working with a Database that has forms set up with multiple select fields.  As seen below, (Question_ID 2533) the Patient_ID, Visit_ID, and Question_ID are the same and there are 3 different answers that were chosen.  I am trying to figure
    out how to seperate these Multiple answers so I can use SSRS to pull them into seperate fields. I believe I know how to use SSRS to pull the data after I have differentiated each answer. I need help with the SQL code...
    Patient_ID   Visit_ID   Form_ID   Question_ID   Answer_ID     Answer
    124            1685        164          2533             1490             
    Muscle pain
    124            1685        164          2533             1492             
    Weight loss
    124            1685        164          2533             1494            
     Shoulder joint pain
    124            1685        164          2534            
    678                Good
    124            1685        164          2535            
    678                Good

    I was able to get the unique identifier by creating a new table using the ROW_NUMBER()OVER and PARTITION BY Functions.  Then I was able to identify each answer of the multiple choice fields.  Here is the full code.
    CREATE TABLE Multiple_Answer(
     Patient_ID INT,
     Visit_ID INT,
     Visit_Date DateTime,
     Form_ID INT,
     Form_Name nvarchar(255),
     Question_ID INT,
     Question_Name nvarchar(1000),
     Answer_ID INT,
        Answer  nvarchar(1000),
        Multiple_Answer INT)
        INSERT INTO Medred_Reporting.dbo.Multiple_Answer
               ([Patient_ID]
               ,[Visit_ID]
               ,[Visit_Date]
               ,[Form_ID]
               ,[Form_Name]
               ,[Question_ID]
               ,[Question_Name]
               ,[Answer_ID]
               ,[Answer]
               ,[Multiple_Answer])
    SELECT        Patients.Patient_ID, Patient_Visits.Visit_ID, Patient_Visits.Visit_Date, Forms.Form_ID, Forms.Form_Name, Questions.Question_ID, Questions.Question_Name, Answers.Answer_ID,
                             Answers.Answer,
                             ROW_NUMBER()OVER
                             (PARTITION BY Patients.Patient_ID, Patient_Visits.Visit_ID,Forms.Form_ID,Questions.Question_ID
                             ORDER BY Questions.Question_ID)
                             AS Multiple_Answer
    FROM            Patient_Visits INNER JOIN
                             Patients ON Patient_Visits.Patient_ID = Patients.Patient_ID INNER JOIN
                             User_Visit_REL ON Patient_Visits.Visit_ID = User_Visit_REL.Visit_ID INNER JOIN
                             Users ON User_Visit_REL.User_ID = Users.User_ID INNER JOIN
                             Visit_Question_Answer_REL ON User_Visit_REL.User_Visit_ID = Visit_Question_Answer_REL.User_Visit_ID INNER JOIN
                             Symptom ON Visit_Question_Answer_REL.Symptom_ID = Symptom.Symptom_ID INNER JOIN
                             Question_Answer_REL ON Symptom.Question_Answer_ID = Question_Answer_REL.Question_Answer_ID INNER JOIN
                             Answers ON Question_Answer_REL.Answer_ID = Answers.Answer_ID INNER JOIN
                             Form_Question_REL ON Question_Answer_REL.Form_Question_ID = Form_Question_REL.Form_Question_ID INNER JOIN
                             Questions ON Form_Question_REL.Question_ID = Questions.Question_ID INNER JOIN
                             Protocol_Form_REL ON Form_Question_REL.Protocol_Form_ID = Protocol_Form_REL.Protocol_Form_ID INNER JOIN
                             Forms ON Protocol_Form_REL.Form_ID = Forms.Form_ID

Maybe you are looking for