Dear 12 Inchers" my screens peeling!

I had to begin a new thread for this- in the corner of the screen of my beautiful 12 in. powerbook there appears to be an unraveling; it looks as if the corner within the lcd is lifting up if thats possible. It does not affect me too much but I'm afraid if i don't address it, it could become worse. does anyone know approximately how much this is to repair. I can't part with it. Also i just purchased a 17 studio display for $50 bucks- steal huh! it was still in the box but they said the adapter i need which is DVI-ADC is $100 bucks, is there a way around that price by any chance? and where?

Yep **bleep** in Poland are not nice! I remember times when our tourist busses, cars and so on were robbered on your roads
Ok, I had similar problem. Solved it just after one day without any strees and extra work - just changed my old wi-fi router (because I was able to connect to my neighbors wi-fi). Simple - just try other wi-fi. Don`t try to re-bild Nokia factory in Chine, try to use compliable router.
My noncompliable router was Netgear with only b/g networks. Don`t remember model.

Similar Messages

Frustrated - Z3 Main Screen peeling off on right end corner in 2 months time.

It is So disappointing that within 3 months from the date of purchase.. my Z3 main screen had popped out of the body on the right top end corner. Given it to servie center yesterday ( 29.5.2015), service center authorities have examined my phone and approved there is no physical damage and accepted it absolutely a manufacturing defect.
What more disappointing is, it takes 20-30 days to reapir my phone. so called big brand SONY has to fix this kind of problem. It is so Embarassing to face fellow colleagues when they had gone for Apple by spending similar money I belived SONY is equally a quality based company and bought Z3. But it proved wrong and disappointing for me now.
Waiting for reply from SONY.

You should Contact Sony Xperia Support.
http://support.sonymobile.com/global-en/contactUs/

Blackberry Playbook Rubber Seal around Screen Peeling off after 10 months

I have BBPB after 10 months its rubber seal around screen is pealing off. How can I get it fixed. will RIm or blackberry fix it because it is still in warranty? what should I do.

Hello bbcaresno,
Welcome to the forums.
You are going to want to contact your point of sale regarding what options you have. Your point of sale handles all warranty claims.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Selection Screen from prog exec and transaction code is coming different

Dear all,
The selection screen is coming diffrent from the execution of the transaction S_ALR_87013558 and execution from the program name.
The program name I found from SYSTEM->STATUS. But when I have checked in TSTC table for the program name for this transaction, it is showing blank in table.
How can I make the selection screen same from both the executions ?
Please help....
Thanks & Regards
Nrusingha Dash.

Hi Nrusingha,
Check with T.Code SE93.
The transaction S_ALR_87013558 is calling another transaction START_REPORT.
Just check with SE93 by giving the T.Code START_REPORT as input.
see whether your program and this T.Code supported program is same or not.
Regards,
SB.

VKOA screen

Dear all,
At VKOA screen (Table:001>Cust.Grp/MaterialGrp/AcctKey) there are Account Assigment Group and Account Key. In these coloumns there are data to configure.
I want to learn where we are configuring Account Assigment Group and Account Key different from VKOA screen?
Thanks&Regards

You can get in the following SPRO path.
SPRO--SDBASIC FUNCTIONS-ACCOUNT ASSIGNMENT/COSTINGREVENUE ACCT DETERMINATIONCHECK MASTERDATA RELEVANT FOR ACCOUNT ASSIGNMENT--
1. MATERIALS----ACCOUNT ASSIGNMENT GROUPS
2. CUSTOMERS----ACCOUNT ASSIGNMENT GROUPS
Hope this solves your problem.
Reward if this helps you

J1IEX - Screen

Dear All,
In J1IEX screen, my client want SCESS field of Credit Available part as editable field in the Detail Data section (below of Item section). Right now SCESS field is in display mode, then all other fields like BED, AED, NCCD, SED and ECS fields are editable mode only.
Kindly give me to solution to change as editable field of SCESS Field in Credit Available part.
Regards,
M.Mohan.
Edited by: Mohan on Jul 14, 2010 4:37 PM
Edited by: Mohan on Jul 14, 2010 4:59 PM
Edited by: Mohan on Sep 6, 2010 2:04 PM

Hello,
I know this is ABAP'er work.
I need some clues or any ref. OSS notes for solve the issue....
Any one help me for this issue....
Regards,
Mohan.
Edited by: Mohan on Jan 21, 2011 9:52 AM

MIGO screen config

Dear all,
In MIGO screen for 551 mvttype I want to make account assignment field as non editable -display form.
How can I do it?
Thanks in advance
Shuva

Hi,
Try with the BADI 'MB_MIGO_BADI' with the methods 'PBO_DETAIL' or 'PBO_HEADER'.
Regards,
Eduardo

Screen dump when posting debit balances to an expense account

dear experts.
A screen dump is produced when saving or posting debit balances to expense accounts for only certain periods and for a certain fiscal year in this case year 2006. what might be the problem. can the problem be solved form the ABAP side or FI side?
its urgent

below is part of the screen dump:
ABAP/4 runtime error                                                            DBIF_RSQL_SQL_ERROR
                    Occurred on                                        26.02.2007                              at          08:26:04
>> Short dump has not been completely stored. It is too big.
SQL error 1438 occurred when accessing table "GLT0 ".
What happened?
When writing a data record to the database (i.e. when
updating the database), only part of the data field was
written (updated). The rest was truncated.
What can you do?
If the error occurred in Open SQL, there is probably an inconsistency
between the NAMETAB and the ABAP/4 Dictionary.
Compare the length specifications of the fields in the NAMETAB with
those in the ABAP/4 Dictionary and contact someone who is able to
perform a consistency check and eliminate the problem.
In most cases, this person will be your SAP consultant.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Select the "Print" function to obtain a hardcopy of the
current termination message.
Error analysis
The problem has arisen because, within the database interface,
one of the data buffers made available for the INSERT (UPDATE)
is longer than the maximum defined in the database.
On the other hand, it may be that the length in the NAMETAB
does not match the maximum length defined in the database.
(In this case, the length in the NAMETAB is longer.)
How to correct the error
Database error text........: "ORA-01438: value larger than specified precision
allows for this column?"
Internal call code.........: "[RSQL/UPDT/GLT0 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the
SAP note system. If you have access to the SAP note system yourself,
please use the following search criteria:
"DBIF_RSQL_SQL_ERROR"
"SAPLGIVA" or "LGIVAF10"
"UPDATE_TT_GLT0"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. "31H"
Application server....... "umprod"
Network address.......... "10.1.1.9"
Operating system......... "Windows NT"
Release.................. "0"
Hardware type............ "PENTIUM"
Database server.......... "UMPROD"
Database type............ "ORACLE"
Database name............ "UMP"
Database owner........... "SAPR3"
Character set............ "English_United State"
SAP kernel............... "31I"
Created on............... "Jun 21 1999 04:44:28"
Created in............... "NT 4.0 1381 Service Pack 3 x86"
Database version......... "ora OCI_73211"
Patch level.............. "315"
Patch text............... " "
Supported environment....
Database................. "ORACLE 7.2..., ORACLE 7.3..., ORACLE
8.0...*"
SAP database version..... "31I"
Operating system......... "Windows NT 51 3, Windows NT 0 4"
User, transaction...
Client.............. 600
User................ "HAVIREO"
Language key........ "E"
Transaction......... "FB01"
Program............. "SAPLGIVA"
Screen.............. "RSM130003000"
Screen line......... 2
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLGIVA" in
"UPDATE_TT_GLT0".
The main program was "RSM13000".
The termination occurred in line 542
of the source code of program "LGIVAF10" (when calling the editor 5420).
The program "SAPLGIVA" was started in the update system.
Source code extract
005120                               HSL10 = HSL10 + TAB_GLT0-HSL10
005130                               KSL10 = KSL10 + TAB_GLT0-KSL10
005140                               TSL11 = TSL11 + TAB_GLT0-TSL11
005150                               HSL11 = HSL11 + TAB_GLT0-HSL11
005160                               KSL11 = KSL11 + TAB_GLT0-KSL11
005170                               TSL12 = TSL12 + TAB_GLT0-TSL12
005180                               HSL12 = HSL12 + TAB_GLT0-HSL12
005190                               KSL12 = KSL12 + TAB_GLT0-KSL12
005200                               TSL13 = TSL13 + TAB_GLT0-TSL13
005210                               HSL13 = HSL13 + TAB_GLT0-HSL13
005220                               KSL13 = KSL13 + TAB_GLT0-KSL13
005230                               TSL14 = TSL14 + TAB_GLT0-TSL14
005240                               HSL14 = HSL14 + TAB_GLT0-HSL14
005250                               KSL14 = KSL14 + TAB_GLT0-KSL14
005260                               TSL15 = TSL15 + TAB_GLT0-TSL15
005270                               HSL15 = HSL15 + TAB_GLT0-HSL15
005280                               KSL15 = KSL15 + TAB_GLT0-KSL15
005290                               TSL16 = TSL16 + TAB_GLT0-TSL16
005300                               HSL16 = HSL16 + TAB_GLT0-HSL16
005310                               KSL16 = KSL16 + TAB_GLT0-KSL16
005320                           WHERE
005330                           RLDNR                   = TAB_GLT0-RLDNR                  AND
005340                           RRCTY                   = TAB_GLT0-RRCTY                  AND
005350                           RVERS                   = TAB_GLT0-RVERS                  AND
005360                           BUKRS                   = TAB_GLT0-BUKRS                  AND
005370                           RYEAR                   = TAB_GLT0-RYEAR                  AND
005380                           RACCT                   = TAB_GLT0-RACCT                  AND
005390                           RBUSA                   = TAB_GLT0-RBUSA                  AND
005400                           RTCUR                   = TAB_GLT0-RTCUR                  AND
005410                           DRCRK                   = TAB_GLT0-DRCRK                  AND
          >                 RPMAX                   = TAB_GLT0-RPMAX                  .
005430                         ENDFORM.
005440                         *eject
005450                         *                                                                                                                                            *
005460                         *
005470                         *                                                                                                                                            *
005480                         *         FORM UPDATE_TT USING UTP_TAB.
005490                         *         Diese Form fuehrt die Tabellenupdates durch
005500                         *         Dabei wird die optimierte Form von UPDATE
005510                         *         verwendet
005520                         *                                                                                                                                            *
005530
005540                         FORM UPDATE_TT_GLT3      .
005550                           DATA: W_0 LIKE GLU1-TSL VALUE 0.
005560                           UPDATE GLT3
005570                           SET TSLVT = TSLVT + TAB_GLT3-TSLVT
005580                               HSLVT = HSLVT + TAB_GLT3-HSLVT
005590                               KSLVT = KSLVT + TAB_GLT3-KSLVT
005600                               TSL01 = TSL01 + TAB_GLT3-TSL01
005610                               HSL01 = HSL01 + TAB_GLT3-HSL01

The screen of my iphone5 became green!

Dear Apple team,
The screen of my iphone5 became green last week for no reason, then I went to SENAO INTERNATIONAL CO., LTD. in Taiwan, because I got my iphone5 Dec 21, 2012, I thought my phone still in the warranty. In Apple’s policy, I could get a normal phone back. Unfortunately, I just bring my broken home, that’s why I wrote this letter…
Employee of SENAO INTERNATIONAL CO. said he open my phone then found it affect by damp. If I want to get a normal iphone5, they will charge me $8,350(about USD 280). But my earphone jack didn’t change any color, and I never let my phone jump into any liquid, even never ever let it fell down to the ground. The only reason to make my phone damp is my hand, I born with “Palmar hyperhidrosis”, my hand often sweat, it truly made my life inconvenient. But this time is the most sorrowful, after I told SENAO my situation, asked if I need to wear gloves when I used my phone, then just said I should know iphone is not waterproof before I bought, even suggest I bought a waterproof phone next time!!!!! In conclusion, they still determine it’s a man-made fault.
I asked them help me to tell Apple my situation, or give me the way to connect Apple, they said Apple always so tough, Apple won’t care about what the true is, if apple see the phone damp inside then it’s man-made fault. By the way, they said they don’t have any way to connect Apple, it’s a little bit ridiculous. My heart was broken from this case I meet, I decided to solve it by myself.
Deep in my heart, I love Apple, the company always put costumers in the first place. I still remember when I was a student, I envy my classmates have Apple products, my parents are very frugality, so I never ask them buy Apple products for me. After I graduated from school, I enter into an accounting firm, I used almost 2/3 of my salary per month to buy my first smart phone, that phone is iphone4S, I tried so hard to book 4S, then I got it Dec 16 2012, the first day 4S start sell in Taiwan, I also got iphone5 in the first week It start to sell here. I bought the new IPAD for my mom as her retirement gift, taught her how to use Apple products, let her knew I didn’t waste money to buy something expensive and useless, I show my parents how these amazing products changing our life. I didn’t tell them I couldn’t change a normal phone back, I just said I have no time went to SENAO.
But now I am so confused and helpless, I know maybe I’m just one of apple fan in whole world, maybe this letter won’t be read, I don’t know whether this letter take any effect or not. I don’t know why I ran into this before my 25th birthday in June 11, I am so unlucky :c
I look forward to hearing from you at your earlist convenience.
Sincerely,

There has never been a facetime icon on the homescreen of iphones. You hav always accessed the feature via contacts.
Have you tried the basics from the manual? restart, reset, restore
Do you have restrictions on?

SAP Screen Modification on RFID

Dear All,
When SAP Screen is displayed on RFID.Its too big to hold so i need to scroll whole screen and very difficult to maintain screen.Can anybody provide me solution for this to make it small or any other solution.
Regards,
MTB

Hi Mayank,
Thanks for the info. However this is also very less info to start answering with
You are telling SAP. What part of SAP are you sending data to?
Is it SAP AII or SAP WM or SAP (?module). Or is it SAP Mobile Applicaiton?
And tags (UHF), what is your physical infrastructure? What SAP Screen is exposed on RFID Reader?

Desktop screen flashing - no activities allowed

Dear All
My desktop screen flashing on and off and does not allow any activities. This is how I could have gotten there: one of my keys were not working so I went into system preferences then keyboard, then I clicked on 'restore defaults'. Then desktop started flashing. THen I could only open in 'safe mode'. So can you please tell me how to fix the problem? Am desperate.....
Thank you
Veedeekay

ps. i HAD TO GO INTO BIOS SELECT THE OPTION TO RESTORE TO DEFAULT SETTINGS & f10 TO SAVE. I WAS TRYING TO TRICK THE WINDOWS 10 SO IT WOULD ALLOW ME TO GET TO THE DESKTOP & BEABLE TO CLICK SOME PLACE WHICH IT WORKED I WAS ABLE TO GO BACK TO WIN 8.1 & EVERYTHING WORKS AGAIN AND ALL MY STUFF WAS BACK. I HAD WRITTEN DOWN ALL THE INFORMATION I SEEN WHEN I WAS IN THE ADMIN CMD WINDOW FAR AS DRIVE LETTERS & AMOUNTS AND WHERE IT SAID DEFAULT, RESUME OBJECT, DISPLAY ORDER & BOOT LOADER INFORMATION IF YOU NEED ANY OF THAT INFOMATION TO HELP YOU TO FIGURE OUT WHATS WHAT GOING ON.I DO NOT HAVE ANYOTHER PROGRAMS INSTALLED OTHER THAN WHAT THE COMPUTER CAME WITH & THE NRTON 360. IT'S PRETTY PLANE.

VK11 screen

Dear all,
On the screen of TCode VK11, how to show the button Maintain formula as this screenshot below:
http://i358.photobucket.com/albums/oo30/vquang124/VK11.jpg
Pls help me,
Thanks,
Quanglv

i think KONP-KMEIN is ready to input , so why do you enter MIL itself ? , or maintain alternative UoM for those kind of materials in MM01.
regards
Prabhu

Playbook screen freeze

Dear support,
My playbook screen suddenly freeze or hanged when i attempted to close a game application. The screen frozed, doesn't respond to anything, doesn't close. The screen light remains ON.
thanks.

I have had 2 similar stability problems on two separate occasions since the recent update to the update (1.0.7)
1. screen froze after attempting to awaken the device with a bezel-to-bezel-swipe
2. keyoard repeated keys while attempting to enter password after waking up the device. I used 6 of 10 attempts to enter the password and was worried that I would be forced to do a security wipe.
Resetting as advised above corrected the problem
In the dark and need a sky map?
Discover What's up at App World.
Follow What's up on Facebook

VA01 screen Profit center

Dear Gurus,
In VA01 screen after entering customer and material, SAP brings profit center automatically. But I want system to bring another profit center. I have changed profit center in material master. But the conclution is the same. It brings old profit center....
But if I change sales office profit center changes automatically..
What must I do to bring correct profit center in VA01 screen?
Thanks in advance

Hiiii
Profit center is derrived form Plant Material view so whatever profit center is assigned to material master in Material sales Plant Data that must come to sales order. Now please check wheather you have extended the material with relevant sales organisation/Plant or not.
Regards
Shambhu Sarkar

Issue while opening websites from module pool subscreen.

I have three subscreens which do open while user clicks a radio button on the main screen . Now in two of the subscreens,there are two text fields which contain url of two websites . When i am setting a GUI status when sy-pfkey/sy-ucomm = 'PICK' , they are getting set but inside the PAI of subscreens when I am writing :-
When sy-ucomm = 'PICK'.
call fn 'call_browser'.
The websites don't open because the PICK fn code is not getting triggered.
In two of the subscreens ,the website addresses / urls will be fixed whereas in the third subscreen,the website address comes from field "tline" .
So I can't handle the scenario through buttons and assigning function codes to them.
Pls advise.

Dear Subankar,
For that screen filed select option like drill down with key.
Regards,
Madhu.

Dear 12 Inchers" my screens peeling!

Similar Messages

Maybe you are looking for