Dear All please suggest me a SAP CRM training institute in Delhi or Noida I am very confused

dear All please suggest me a SAP CRM training institute in Delhi or Noida I am very confused

Hi sachin,
If you are looking for SAP CRM training as well as certification then you should try in ATOS. ATOS is the authorized training partner. The office is situated in GK II (Near masjid moth).
Address: 3rd Floor, Vipps Center, 2 Local Shopping Complex, Masjid Moth, Greater Kailash-II, New Delhi, Delhi, Enclave 3, Greater Kailash, New Delhi, DL 110048, India
Phone:+91 11 2922 0697
Regards,
Dinesh.
Message was edited by: Dinesh Sachdeva

Similar Messages

Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement.

Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement. So please give me inputs for the same..
Thank you,
Vinay Kumar A

You can try converting a synchrnous soap call to asynchronous using a custom module
Here your module will send a response back to the sender system and make an asynchronous call forward

SAP CRM Training Material

Hi Friends,
I am planing to learn SAP CRM, Kindly please help me to get SAP CRM training materials.
I appreciate your help in advance.
Thanks,
Regards
Venkat

Hi Sundar
There is a study material for Middleware CR-555.Am not sure whether you can download it.
Cheers

Need SAP training institutes in DELHI or Gurgaon

Hi,
Please give me the details of any good SAP FICO training institute in Gurgaon or Delhi.
Also plz tell me how to award the points.

hi,
Check this SAP Certification Policy which states all the details about certification including experience and all:
https://websmp204.sap-ag.de/~sapidp/011000358700003517532005E
Siemens Information Systems Limited
1st Floor, VIPPS Centre
2, Local Commercial Complex, Masjid Moth
Greater Kailash - 2 New Delhi - 110048
Tel: (91) 11 299220694/29220695/29220696/ 29220697/29221248/29216047/292...
Fax: (91) 11 29214685
Contact Person: Ms.Rochika Bhatia
Hope this helps, Do reward.

Hi ALL please suggest on this

Hi ALL ,
Iam a business object XI Developer ,Now i have an option to go SAP BW or to continue working in Businessobjects and SAP acquired BO .Its confusion for me which one to select
can anyone please suggest which way is best .
Thanks & Regards
Sameer Khan

hi,
if you know BO, and have he option to work with BI its good hope u could proceed with BI.
Business one
http://www.ciol.com/content/news/2006/106012308.asp
http://contextlabs.in/pdfs/SAP_Business_One-Brochure.pdf
Ramesh

Hi all need your guidance about SAP certification & training..

I have done SAP MM certification online training program from Delphi Computec, Pune during 2012. But could not clear the exam.
Now i am thinking about going for second attempt. Can any one suggest if i need more training or just doing the books would be sufficient?
I feel that i should go for some more training for certification purpose, can u suggest any training program that would help me clear my certification.
Please suggest.
Thanks
Vinayak

Hi vinayak as you mention
I have done SAP MM certification online training program from Delphi Computec, Pune during 2012. But could not clear the exam. Now i am thinking about going for second attempt
A lot of changes happen in certification .To get update information please go though Training and Certification Shop A little "search" in SCN can help you to get more information about SAP MM certification.
can u suggest any training program that would help me clear my certification.
Try to engage with the community SAP ERP - Logistics Materials Management (SAP MM).
read Dëv Päträ content blog posts discussions you get clear idea .
hope it helps
poorna

SAP MDM training institute in Europe/ UK(non-SAP)

Dear all,
I've been working in Informatica for quite sometime. I now want to get into SAP MDM. I have now a clear idea of what MDM is as a concept. Even my ETL/Data warehouse knowledge aids in picking up MDM quickly.Please let me know if this move is wise.
Secondly, does any one have any idea where I can get trained in SAP MDM in UK or Europe other than SAP Education? If so, please let me know.
Cheers
Sarma.

Hi,
>>>>Even my ETL/Data warehouse knowledge aids in picking up MDM quickly
MDM is not a data warehouse - it's a master data storage
BW (sap's data warehouse) is a separate component
for MDM you'd need some module knowledge (master data, hierarchies etc)
and integration (to connect r3 with MDM)
>>>Secondly, does any one have any idea where I can get trained in SAP MDM in UK or Europe other than SAP Education?
there are many consulting companies that do MDM tranings in europe
but why would you want to do that? with SAP you can check your trainer's experience before attending and decide on this basis
Regards,
michal

SAP GTS Training institute

Hi,
Any recommendations for SAP GTS training insititute in Bangalore, India ??
Thanks
Kintu

Hi Everyone ,
Please go through the below URL's to understand the basic overview of SAP GTS module and it's application areas .
SAP GTS Training Day 1 Part 1 by G.V.Rao ( VENKAT ) - YouTube
SAP GTS Training Day 1 Part 2 by G.V.Rao ( VENKAT) - YouTube
SAP GTS Training Day 2 by G.V.Rao ( VENKAT ) - YouTube
If you need any documents in this regard , please let me know I can help you in this regard .
Sri Krishna

SAP institute in Delhi or Noida

Hi,
i m searching 4 an ABAP-training institute in Delhi or Noida.
could anyone can help me in finding the right institute for that.
thanks in advance
regards,
Arpita

Hi,
You can contact at :
Siemens Information Systems Limited
1st Floor, VIPPS Centre
2, Local Commercial Complex, Masjid Moth
Greater Kailash - 2 New Delhi - 110048
Contact [email protected]
Phone +91 (11) 299220694/29220695/29220696/ 29220697/29221248/29216047/29221247
Fax +91 (11) 29214685
Reward, if helpful,
Regards,
Sandeep Kaushik

What is activity in SAP CRM with examples plz?

Dear All
What is activity in SAP CRM with examples plz?
Thanks
CRM Newbee

Activities are explained in CR010 & CR300. It is a transaction type used to record sales activities e.g. telephone call, email or customer visit or a follow up call, request to fill up a questionnaire or request to set the status to complete etc. in customer/partner engagement lifecycle. This has mainly information like: Activity type partner, texts & dates. However it is an order document like opportunity, sales order etc. & extra information can be added by including customer set types like we do in opportunity, quotation, sales order, conttract etc.
Activities are a central part of SAP CRM & used across application e.g. Interaction Center, Sales, Marketing etc.
I hope this should be sufficient & helpful.
If you need to understand more about basic concept of Activities please see the dropdown list for Activity types..this will give you a good idea as to what are the kinds of business transactions which can be activities.
Regarding Quotation thing...Quotation is not an activity but 'Create Quotation' or 'Create Quotation as follow up to a lead or opportunity' can be an activity.
Thanks,
Vivek

Suggest me the best training institute for SAP CRM ABAP / CRM Technical

Dear all,
Kindly suggest me that, which training institute in India is providing training course specially on SAP CRM ABAP course.
I am happy if any SAP CRM Technical expert willing to train me directly. I have good functional experience on CRM module and planning to be trained on technical part.
Your recommendations will be highly appreciated.
best regards
Raghu ram

user12483593 wrote:
hi,
i am looking for good training institution in india to learn oracle dba
so pls can any one suggest me which institute providing the best training for this course
thank you in advanceThe best training is probably by Oracle University
Goto [http://www.oracle.com/education] - choose Product Courses, Database and Grids:
(eg [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=14&p_org_id=1080544&lang=US])
In both cases ensure country selected on top right is India.
On the schedule choose courses with +100% Student Satisfaction+
It is hard, (though obviosly not impossible), for other institutions to better this standard of such courses.
If you are aspiring to Oracle DBA OCP be very sure the institute you are choosing satisifies the requirements for the Hands on Course, and do not take the institutes word for it but check.
It may well be that you are looking for institutions offering the WDP programme. This is a maximm of 6 hours/week over several weeks so IMHO is impractical if you do not live nearby. There appear to be comments that sometimes the training from these institutes doing the WDP course can be of very variable quality. Probably the only option here is to seek out the opinions of recent psat students you can trust.

Creation of new product hierarchy and products in SAP CRM.

Dear all,
please help with resolving of following issue:
In CRM system base hierarchies were replicated from R/3 system with materials. Current requirement is to create new materials in CRM directly (as standalone scenario). As far as I understand, I have to create new hierarchy with required list of set types in order to allow creation of products in CRM directly (product type = material). Can anybody describe changes in the system step by step, what should be changed and where?
As a result I need to have a possibility to create products in CRM directly for sales scenario processing.
Thank you in advance!

Hi Jorge,
thank you so much for your reply!
Here what I tried to do:
1. I created new category in hierarchy R3PRODSTYP, added 3 set types: COMM_PR_MAT, COMM_PR_SHTEXT, COMM_PR_UNIT as basic set types.
2. In the SPRO - Cross-Application Components - SAP Product - Settings for Product Type - Number Assignment - Define Number Ranges for the Product Type "Material" I found my new product category is unassigned, so I assigned it to the "CRM Products" group.
3. Farther I tried to create a new product for created category in CRM Web UI, but was not able to find it in the Base category search field. All categories correctly displayed from R3PRODSTYP, but my new category is absent. What can be the reason of category absence? Btw, it cannot be found even when I try to display whole hierarchy in Web UI, however, in SAP GUI, it can be seen via tcode comm_hierarchy.
Here is the setup of hierarchies in the system:
I have no idea how to check #3 "Ensure the hierarchy is assigned to CRM application".
Can you please suggest, what should be changed in addition? Thank you!

What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

Dear all,
Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
Your suggestions will be highly appreciated.
Thank you
Raghu ram

Hi Raghu,
In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
[https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
regards
Srikantan

Sap CRM 2007 Security related issue

Hi All,
I am working on SAP CRM 2007 security.
I have scenario, which we are trying to fix.
There are two users A and B.
A is assigned to role X
B is assigned to role y
Business Partner 123 is created for user A
Business Partner 456 is created for user B
These Business Partners are assigned to Authorization Groups.
See below:
1)Authorization Group (LK01) is assigned to Business Partner --123.
2) Authorization Group (LK02) is assigned to Business Partner --456
3) Authorization groups LK01 is assigin to user A in PFCG role X
4) Authorization groups LK02 is assigin to user B in PFCG role Y
a) User A assigned with PFCG role X>Authorization Group (LK01)>BP 123.
b) User B assigned with PFCG role Y>Authorization Group (LK02)>BP 456.
Note:
1) Authorization Groups are assigned to BPs under the Control tab.
2) These Auth Groups are assigned in Authorization Object in PFCG role.
Now, USER 'A' should not be able to work under the BP 456 as this BP is assigned to authorization group LK02.
The issue is when we open the WEB UI and login with user A role X, He can search for the BP 456 assigned to Auth Group LK02.
User A can open the Interaction History and edit the Service Order created using the BP 456.
He can Edit the following in Service Order details:
1) General Data Status (from created to complete), Contact person, Sale Rep name.
2) Organization Data like Sales Office, Sales Org Unit, Distribution Channel
3) Business Partner.
However, one good thing is he cannot edit the Account details like Account ID, House No, Employee Resposible, the message he get is "No authorization to change partner with authorization group" which is a
good thing.
I have tried to be precise, please let me know if you require more information.
Regards,
Dave.

I suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant

How to send Email to customer when clicked on hyperlink on SAP CRM web UI

Hi all,
I am working with SAP CRM 7.0 EHP1. I have one field named Email on Complaint description page on Web client UI. I have made the field a hyperlink by using the setter getter methods of attribute in component workbench for the component -BT120H_CPL. Now I want to send one mail to customer who have raised the complaint when clicked on the hyperlink Email through SAP CRM if possible or by using Microsoft outlook(Microsoft outlook is default mailing server on the system).
Please help !
Thanks and regards,
Kavita Chaudhary
Mobile: 8800222151

Hi kavitha Chaudhary,
if you wan to send any details to outside mail id first you should get that person mail id. based on that you can send data to that mail id by using this code...
just fallow this code in your event..
DATA: send_request       TYPE REF TO cl_bcs.
DATA: text               TYPE bcsy_text.
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO cl_sapuser_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
DATA: bcs_exception      TYPE REF TO cx_bcs.
DATA: sent_to_all        TYPE os_boolean.
TRY.
*     -------- create persistent send request ------------------------
       send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document -------------------------------
*     create document from internal table with text
       APPEND 'Hi to all' TO text.
       document = cl_document_bcs=>create_document(
                       i_type    = 'RAW'
                       i_text    = text
                       i_length = '12'
                       i_subject = 'test created by srinivas' ).
*     add document to send request
       CALL METHOD send_request->set_document( document ).
        sender = cl_sapuser_bcs=>create( sy-uname ).
       CALL METHOD send_request->set_sender
         EXPORTING
           i_sender = sender.
* hardcoded value im passing here u should capture customer mail id here..
data : lv_email type string.
lv_email = '[email protected]'.
*     --------- add recipient (e-mail address) -----------------------
*     create recipient - please replace e-mail address !!!
       recipient = cl_cam_address_bcs=>create_internet_address(
                                         lv_email ).
*     add recipient with its respective attributes to send request
       CALL METHOD send_request->add_recipient
         EXPORTING
           i_recipient = recipient
           i_express   = 'X'.
*     ---------- send document ---------------------------------------
       CALL METHOD send_request->send(
         EXPORTING
           i_with_error_screen = 'X'
         RECEIVING
           result              = sent_to_all ).
       IF sent_to_all = 'X'.
         WRITE text-003.
       ENDIF.
       COMMIT WORK.
* *                     exception handling
* * replace this very rudimentary exception handling
* * with your own one !!!
     CATCH cx_bcs INTO bcs_exception.
       WRITE: text-001.
       WRITE: text-002, bcs_exception->error_type.
       EXIT.
   ENDTRY.
after this go to sost transaction.
first you can see first mail.. select your recent mail id execute then you will get email..
try this and let me know..
if this is not working then see this link too this might be help full to you.
Hyperlink in Email using Send Mail Activity
Thanks & Regards,
Srinivask.

Dear All please suggest me a SAP CRM training institute in Delhi or Noida I am very confused

Similar Messages

Maybe you are looking for