Dear all, Since Friday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?
Dear all,
Since wednesday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?
Last night I wiped the phone and did a complete restore. Lo and behold the wifi was working again after the restore finished. GREAT. 30 minutes later went to look at the phone and no wifi again, great!
So if my wifi chip coincidentally fried itself during the update, I supposed it coincidentally unfried itself during the restore, only to fry itself again later. Clever chips these.
Similar Messages
-
Adressbook doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your adressbook is 5.0.3.
PB says You have adressbook 10.5.3, yes, but now?
Can anyone please help?Use the copy of AddressBook that is in your Applications folder, not the one on your Dock that's linked to a transplanted copy of the prevoius AddressBook App.
-
I change my apple ID and password like a week now and after changing all my information and MY apple ID, i noticed that i lost all my picture in my camer roll and my photo stream too ;(.. Can anyone please help me how to bring it back all my photos?
I don't know about your camera roll, but for photostream just do this:
Go into Settings > iCloud > Delete Account and then sign back in using your Apple ID information.
Make sure to do the same thing with your iTunes and App Store options.
Settings > iTunes and App Store > Click Email and sign out, then sign back in. -
My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!
Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace -
I posted a couple of days ago about a problem my iPhone 4 was having trying to stream video via WiFi
Basically, since I upgraded to iOS 6.0.1 I cannot stream YouTube videos via the app or via Safari, Netflix will not work nor will services such as BBC iPlayer.
I've also discovered this evening I cannot stream any radio apps either.
All of them will play for 10-30 seconds then stop buffering making them impossible to play.
I was given several pieces of advice including restoring the phone to factory settings, restoring it as a new phone, hard resetting twice in a row, deleting all the cache/data in Safari but nothing that has been suggessted has solved the problem.
I know it is not a problem with my internet/WiFi as I have a laptop and a PC both using it and streaming YouTube/raddio stations etc. with no problem. Also, my girlfriend has a 3GS with the old YouTube player and that works with no problems at all.
Can anyone please help me out as it's getting a bit frustrating not being able to use the streaming function on my iPhone.
One thing that is odd, I have no problem surfing the web on the phone via WiFi or streaming over 3G. It is only a problem when trying to stream video/audio over WiFi.
Thanks.This is a link to the Apple support page on this issue. Have you tried all of these steps?
http://support.apple.com/kb/TS1559?viewlocale=en_US&locale=en_US
Not sure what you mean that you have no signal but are on 3. What are you trying to say? -
My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?
Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.
-
I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.
Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps -
I had issues with the new update to itunes. I did as the website instructed and uninstalled all components.
I went back to download and it acts like everything has downloaded
by stating congratulations but nothing had downloaded.
Please help/.
I need the itunes on my desktop (PC_)Hi there, to authorize a computer, you open up itunes, and at the very very top lefthand corner, there will be a little window. Click on that, and it will present you with a list of options. From there, you go to the third option down, which says "Itunes Store," hover over it with your mouse, and it will give you another set of options. From there, you can see the two options, "Authorize" an "Deauthorize computer. Just click on "Authorize," enter in your apple ID and password, and your computer will be authorized! Hope I helped, ~Samuel
-
Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?
I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.
-
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
-
When I try to connect to itunes the message say's error 11333. When i try to update itunes the computer say's it cannot connect and further tells me to check my connections. Once again I am able to use safari to get onto the internet fine. I went on trouble shooting at apple.com, but the thing's it told me to try failed. Can anyone please help?
Hey, Buzz.
You can download the latest version of iTunes supported on Leopard here:
http://support.apple.com/kb/DL1575
I hope that helps. -
I am using Mandriva Linux now.
But I am using Firefox 3.6.8, but I cannot install java plugin in it.
Can anyone please help me how to install it?The plugins folder in the Firefox installation folder doesn't exist by default. There is no default plugin in Firefox 4, so that folder would be empty and in thus not included. If you want to use that location then you need to create a plugins folder.
Did you try /usr/lib/mozilla/plugins ? -
I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?
Thanks for that. I did as suggested but when I tried again, it still did not work. Another com.apple.Grab.plist appeared in the Library.
I now have the following files in Library
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
file://localhost/Users/peterpatel/Library/Preferences/
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
What do you suggest I do now? -
I started updating my iPhone 4, but it went black screan and then started turning on and off non stop. I tried to hold the two buttons, but nothing different happened. Please, help! What should I do?!
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
I updated my iMac to Mountain Lion and when I want to fit my screen view... in the last version I had to examples where I could choose wide after format but I miss that function now in Mountain Lion. Can anyone please help me???
I'm sorry for my bad english, my problem is that I want the program I open in a new window to be avilable in full screen mode. Before I uppdated my os to Montaine Lion I could choose wide under screen in settings. I'll take an ex for you. When I play poker online I want to see the tabel in full screen but I don't manage to fix that. Do you Sir have any idea???
Maybe you are looking for
-
How to remove songs/albums from Iphone 5 S and itunes library inorder to add new songs
I have an Iphone 5, 7.1.2 model. I have been attempting to add new songs onto my phone but do not have any available space. Although I have deleted and removed apps and other space eating products from my phone, I still do not have enough space to
-
Moving photos from photoshop elements 3.0 to photohop elements 4.0
Photoshop elements 3.0 starter edition was installed on my computer by Dell. I upgraded to photoshop elements 4.0 but did not register the 3.0 edition. I did register the 4.0 edition. I want to move photos from 3.0 to 4.0 but a screen requiring th
-
Flash cs 5 "go to and play" not working
In the Scene palette, I've got 7 scenes each of which is a variation of a gently animating and looping node structure. Each scene contains nodes which we can press to play another scene. I've placed a large invisible button over the nodes with a cod
-
Inclure un driver de port série dans un programme d'insal d'une appli Labview
Dans une application Labview, nous communiquons avec le port série (VISA read/ write). Sur le poste de développement l'application fonctionne correctement mais lorque nous générons un exécutable (création d'un programme d'installation) pour l'insalle
-
Run jsx from outside illustrator
I am trying to automate the process of making business cards. I have figured out how to get variables from an xml file, now I want there to be a script that runs when either the xml file is updated or when a webpage is loaded, it should be completely