Dear Apple: Please Reinstate 3rd Party Apple Support for iPhone
Apple, since downloading and installing OS 3.1.3 for iphone I have lost all 3rd party app support. Please make a new OS update available as soon as possible, or allow those of us with issues and no previous issues with the old OS to go back to the earlier version.
Download any free App to your phone - it doesn't matter which. Then hold the Home Button down and press the top button until the red slider appears, but keep holding it until the phone switches off completely.
Wait a few seconds, then switch the phone on in the normal manner ... and it should be working okay now. At this point we hopefully say "taraaaaa .... its working again"
Similar Messages
-
ISO 3rd party Apple service provider in the Inland Empire
ISO 3rd party Apple vendor or savvy Machead who can take out a hard drive from an old MAC G4. Ideas anyone?
Can you be more specific about where you are? Our area (northern Idaho/ western Washington) is called the Inland Empire but I've seen other regions use the same moniker.
Also, G4s are newer than this forum covers and have their own fourm area full of PPC experts. I'm going to ask the Hosts to move your post to the PowerMac forums (assuming you have a PowerMac G4 tower or Cube, and not a PowerBook, iMac, eMac, iBook, or other G4 variant.)
The forum you found gets painfully little traffic.
Here are Apple instructions from replacing a hard drive that cover most PowerMac G4s:
http://support.apple.com/kb/HT1815 -
Please, can Apple give explanations about dropping Applescript support for Pages 13!!??? It is paramount, please do something to fix it asap!!!
You might want to check your firmware version. Go to: Settings>General>About. Look at the version field, it should be: 5.0.1(9A406). If it's 9A405 you need to update the firmware by connecting your phones to iTunes and updating it. This worked for me as I work on a ship and don't have a signal inside. I was having to do your little trick many times during the day when I would go outside to check for messages.
-
Will Apple please reinstate the 'bold' keyboard in IOS 7?
Could Apple please reinstate the 'bold' keyboard in IOS 7? The new keyboard is too pale and difficult to use.
In General>Settings>Accessibility there is an option for Bold Text, but this doesn't really affect the keyboard. If you want to make your voice heard by Apple, provide feedback here: http://www.apple.com/feedback/iphone.html
-
I have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.
Backup your music to an external source before doing this, just in case you delete the originals by accident.
iTunes will show you the duplicates. But I recommend tagging their comments or another field once selecting them to ensure you don't accidentally delete both the original and duplicate. You can always select all of them and change all their comment tags at once. Once you've done that, stop showing duplications, and then sort by the comment field. This will allow you to determine whether only the duplicates were shown in the show duplicates, or the originals. If you see any without comments, then you can go ahead and delete the duplicates. -
Can Apple comment on their lack of support for burning CD-TEXT?
Can Apple comment on their lack of support for burning CD-TEXT?
I've been getting the runaround from the support people. They said to resolve my issue check out the following kb articles. The articles were aimed at giving me more information about ID3 tags and formats that I care about. I just want my burnt cd's to work in my CD-TEXT capable cd player.
I've done this using alternate software packages so I know my hardware supports it. I'm really looking for a complete solution for myself (techie) and my wife (non-Techie) to use and make us both happy. I have to admit, this really bothers me.
I know I'm not the only person asking about this. Please add the support for CD-TEXT to I-Tunes.
Thanks
Windows XP
Windows XPApple people don't comment here, it's a user to user forum.
But you've got me interested. CD-TEXT, what is it? Should I just look it up in wikipedia or do you have a better explanation of what it is you're after? -
My iTunes card won't redeem and when I try to it comes up with this "The gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes Store costumer support for assistance" can anyone help me?
Is the store that you bought the card from nearby so that you can try going back and asking if they can activate the card properly ? If it's not, or if they can't/won't activate, then you will need to do as the message says and contact iTunes Support (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes (you will probably need to give them images of the front and back of the card, and possibly its receipt)
-
An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Hi!
I am trying to install iTunes on my laptop that runs Windows 8.1
I have tried several solutions discussed in similar questions but none worked
-uninstalled and reinstalled
-cleaned C drive for all Apple products
-tried to install security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’ but the same error appeared
-Windows module installer is enabled
I always get this error
an error occured during the installation fo assembly "Microsoft.VC80.CRT.type="win32", version="8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b", processor architecture="x86", please refer to help and support for more information. HRESULT: 0x80070422
If i ignore and proceed another error appears
Service 'Apple Mobile device' failed to start. Verify that you have sufficient privileges to start system services
If i ignore one more time, itunes is installed but when i try to run it
Apple application support was not found. Apple Application Support is required to run iTunes Helper- please uninstall iTunes and then install itunes again-error 2
Can someone help me please? Thank you!Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason -
An error occurred during the installation of assembly 'policy 80.Microsoft.VC80.CRT.type="win32-policy" version+"8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: x...
Encountered during reinstall of iTunes. Any ideas?It is a big issue for many users. There is no clear fix yet, but some users have had success with some of the solution on this thread.
https://discussions.apple.com/message/16751339#16751339 -
At first i got a problem with my Apple Mobile Device Support, but then after i've done some research browsing the net on how to fix that problem, i've finally found the solution to that problem... However, after I've finish installing and trying to run ITunes, there's a pop up says Error 2 , Apple Application Support is needed to run ITunes.... So i've followed the instruction and suggestions given out which is to extract my iTunes64Setup and install Apple Application Support standalone manually, but during the installation, an error pops out that really really really could give me cancer.... the error goes like this-
""An error occured during the instilation of assembly "Microsoft.VC80.CRT,type+"win32",version="8.0.50727.6195"publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x80070BC9.""
God knows how many times i've reinstalled Itunes, and how many pages i've been thruu just to look for a solution to this problem..... PLEASE HELP ME IM BEGGING YOU TO WHOEVER HAVE ANY IDEA ON HOW TO FIX THIS T^T
Im running on Window 7 ultimate 64-bit btw...OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Hello,
Pls help me while I am intalling itunes for win7 I getting follwoing errro:
an error occurred during the intallation of assembly Microsoft.VC80.CRT.type='win32".version="8.0.050727.6195",publicKeyToken="1fc8b .3b9a1e18e3b".processorArchitectyre="x86"/please refer to help and support for more information. HRESULT:8x800736FD.Hello there BJiphone,
Thank you for using Apple Support Communities!
It sounds like you are having issues installing the latest iTunes on your computer.
I would try the troublehsooting outlined in the article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Sterling -
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processo rArchitacture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x8007054F.
this problem, how to solve it? I tried install, reinstall, uninstall so many times already...Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.
-
ANYBODY KNOW WHAT TO DO?
IT WAS DOING SAME THING WHILE I WANTED UP on 10.6 verion...:(
Thank you for all answers that might helpeven after getting the new update (10.5.1 - DL1426) i still get the same error: When trying to install itunes 10.5.1 for windows vista 64bits from apple's website it shows:
An error occurred during installation of assembly
'Microsoft.VC80.CRT type="Win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b9a1e18e3b",process
orArchitecture='x86'. Please refer to Help and
Support for more information. HRESULT: 0x80070002
Then I have to cancel it. Then shows: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127).
What should I do?
Tks in advance
Rodrigo (Brazil) -
Hi,
I cannot install iTunes after an update went wrong. Seen another with exact same problem but without an answer. Error message is:
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="",proc essorArchitecture="x86'". Please refer to Help and Support for more information. HRESULT: 0x800736FDOK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
Maybe you are looking for
-
I want to write a post on a LV topic, but something seems to be wrong: 1. Attachements doesn't work: I have chosen a file and have clicked on "Add Attachment", but nothing happens. 2. When I click on "Preview" my text disappear. What can I do? EPH1
-
Hello! I've had a Zen Micor for some time but now teh hardri've has started making these beepnoises and the earphone completely **bleep**ed so I'm planning to get a new player. I was just wondering since i have my usb charger from my Zen Micro, can i
-
Display error messag in partner funcation tab in Vd02 useEXIT_SAPMF02D_001
Hi, There is a requirement to display a error message in vd02 for partner function tab when ship to party is exist in LFA1-KUNNR's . I am using the User exit EXIT_SAPMF02D_001 to dispaly error message . The problem is the message is displaying in dif
-
I want to upgrade to snow leopard,how do i save all my data?
What do i have to do before i set back to default status to save all my data?
-
Ok, so I had intended to dump Vista in favor of XP for performance reasons. Turns out that Vista doesn't suck too badly after a ram upgrade, though I'm still not a huge fan. I had also tried an Ubuntu live cd and was impressed that it almost worked.