Dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

I work in the power conversion industry and do these types of measurements all the time…
Do you want to just measure power quality or create and measure power quality problems?
What hardware are you using?
Power quality analyzer?
Programmable AC power source?
Fast Transient Generator?
Here is an example of what I do.
To create PQ problems I use a California Instruments AC source set to nominal power for the unit under test. Using Labview I program several transients consisting of fixed and random duration dropouts and surges. I also use a Schaffer Fast Transient Burst Generator to apply high frequency noise bursts directly onto power lines.
For measuring power quality I use a Voltech PM3000A power analyzer and Labview to measure everything from voltage, current, and frequency, to harmonics and %THD
Message Edited by RTSLVU on 07-23-2008 10:31 AM

Similar Messages

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj S

I already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software.

Can any one please tell me how to write labview program for data logging in electric motor bike.

Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?

Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can any one please tell me how to configure the oracle data gaurd. in steps

can any one please tell me how to configure the oracle data gaurd. in steps

Hi,
http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
Regards
Yoonas

Can any one please tell me how I can print off my iPad air from my hp printer????

Can any please tell me how I can print from my iPad air to my hp printer??????

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

Can any graphics pros tell me how to calibrate the glossy screen?

just curious.

There are a million different tools out there for monitor/printer/scanner calibration, but the one that's getting a lotta notice lately is the Color Munki from X-Rite...
http://www.colormunki.com
It's basically the latest bundled colorimeter & software product from X-Rite aimed at mid to high-level users that is crazy-simple to use and it takes all of 5 minutes for calibration. You can spend 2 grand or more for color calibration, but unless you're working in a graphics house, it's not really necessary. However, as good as the Colormunki is, it still ain't gonna calibrate a glossy screen to the point where you get a WYSIWYG output...it's just not possible with the heightened brightness of the glossy screens vs. matte screens. I spoke with my X-Rite rep last week to see if they have any idea if their current line of calibration devices will EVER be able to overcome the brightness differences between glossy and matte monitors and he told me they don't consider glossy monitors professional tools and therefore, don't focus on them seriously. He did say (which I have said all along) that color calibration is generally as good as with matte monitors, but the way a colorimeter 'reads' a monitor is not as simple as you might think...the way a backlit LCD monitor kicks out it's image fools colorimeters and there is no good way to make a calibration device that works on a glossy screen. I use Monaco EZColor with a Monaco OptixXR colorimeter and after trying about ten different variations I still can't get my iMac glossy display to come close to my Studio HD monitors. Color-wise, they're right on, but the iMac still spits out a file that is about 2/3's of a stop darker than it should be. My only work-around is to manually adjust the brightness control after the colorimeter has done it's work so that the final brightness output is darker than the software says it should be. Then I do a series of test prints to match the visual effect on the monitor with the output from my printer. This is HARDLY any way to run a professional-level output workflow, but what'cha gonna do?!!
BT in NYC

Can you plz tell m how to write Design Strategy in the scenario IDoc-- File

Hi,
can any body plz tell me how to write Design strategy, Preprocessing logic and post processing logic in the scenario IDoc-->File.
    My idoc is:
            Message Type: ZMMIPORDCHG
            Basic Type : ORDERS05.
lookup's are available.

Hi,
take a look at this document for an IDOC to IDOC Scenario,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Use it as a template to design one side of the Interface and also take a look at this blog,
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Bhavesh

Hi I am from Spain and I am new on Macworld, recently I have bought a Mac Book pro, the keyboard is not configured rightly when I have to write @ I have to press g instead of @ key , how can I solve this problem ?. Thanks in advance.

Hi ,
I am from Spain and I am new in MacWorld, recently I have bought a MacBook Pro , but teh keyboard is not configured rightly, when I want to write @ I have to press g instead of the @ key, or the symbol for questions ?, I have to press :: key. Please how can I solve this problem ?. Thanks in advance.
BR,
XAvier

xavier85 wrote:
I am new in MacWorld
Sorry to disappoint you, but this isn't MacWorld.
when I want to write @ I have to press g instead of the @ key
Are you sure you don't have to press ⌥-G (Option-G) to get @?
Anyway, sounds like a keyboard/keyboard layout mismatch.
Go to System Preferences > Language & Text > Input Sources. From "Select input methods to use" enable (check) the following
Keyboard & Character Viewer
U.S.
Spanish
Spanish - ISO
Also enable "Show Input menu in menu bar".
The Input menu should appear to the right of your menu bar, with the icon of a national flag. From this menu, choose "Show Keyboard Viewer". Then compare the layout displayed by Keyboard Viewer with the label on your MBP's keyboard. If it doesn't match, choose a different layout from the Input menu.
My suspicion is that you're using a US keyboard with a Spanish keyboard layout, hence the difference you noted.

My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!

My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!

Just to make sure... you have the phone in ringer mode right? Sometimes the switch on the side gets bumped (especially if you don't have a case on the iPhone) and goes into silent. If you see a orange line on the switch - it's on silent.
If the switch is fine (and isn't loose or anything) try restoring the iPhone in iTunes.

HT1338 I need to how can I have Mac OS Lion, as I bought my Macbook Pro in beginning of June 2011 from Apple Store US. The serial number of my product is C0*******H2M. Please confirm me that I can have it for free, and how could I install it. Many Thanks.

I need to how can I have Mac OS Lion, as I bought my Macbook Pro in beginning of June 2011 from Apple Store in US.
The serial number of my product is C0*******H2M. Please confirm me that I can have it for free, and how could I install it. Many Thanks.
<Edited by Host>

Sorry, but that opportunity has long passed. Your options now are:
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

here is link to the apple product feedback website:
http://www.apple.com/feedback/

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

Photoshop Cs6 :: Can't open canon 650D cr2, how I solve this problem ??

Can't open canon 650D cr2, how I solve this problem ??

Is your CS6 ACR Plug-in up to date at version 8.6?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

How can i unlock the service with AT&T or other carrier? when i was in overseas ?how much does it cost to unlock?

how can i unlock the service with AT&T or other carrier? when i was in overseas ?how much does it cost to unlock?

The only way to unlock a locked device is through the carrier. If it is locked to AT&T, you will have to contact them to get it unlocked.
Cheers,
GB

Dear frnz, i am doing my prjct in Lview. ie online PQ monitoring​. i need to simulate the system with disturbanc​es generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

Similar Messages

Maybe you are looking for

Dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..