Dear Mike...Can you send me the example by Labview 8.0. I can not open your file

Thank you very much. If you can please, atach a file by Labview 8.0 or oldest version.

Here it is... But in the future you shouldn't start a new thread - reply to the original one. If nothing else it helps me remember what conversation it was associated with...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
xy example80.vi ‏22 KB

Similar Messages

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya

Even I have the latest version of Adober reader I still can not open pdf file on safari

Even I have the latest version of Adober reader I still can not open pdf file on safari.

Save the file locally, open the Reader application and try to open it from there. If it still doesn't work provide the full details of your OS, Reader version and the exact error message you're getting when you try to open the file.

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Are you wanting to stop the 41 files from opening at once or is this intentional? At what point do they open when you power on the mac or when you boot Illustrator? What OS version are you using?
If you can answer the questions above can provide better advice, but you may be running into something similar:
http://www.mactip.net/stop-lion-restoring-previous-files-apps/

Can not open JPEG files and can not create JPEG files from other software

Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014

Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

Can not open RAW-Files from Nikon D4 in Photoshop cc

hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list. Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

CAN NOT OPEN ANY FILE

CAN NOT OPEN ANY FILE. USE W8 & ADOBE PHOTOSHOP CC 64B

Welcome to the forum.
Can you please provide us with more info, with which to work? This FAQ Entry will tell you what would be useful: http://forums.adobe.com/thread/1042147?tstart=0
Good luck,
Hunt

I can not open raw files in elements 12 any help please?

I can not open raw files from my Nikon D610 in elements 12. (I have already downloaded raw converter 8.3 but to no avail) any help please would be appreciated.

Hi,
Can you confirm which Camera Raw PSE 12 is actually using by loading the editor and going to Help -> About Plug-in -> Camera Raw.
If you do Help -> Updates it may install the latest camera raw of 8.4 - not on XP or Vista systems.
Do you use any Nikon software to download the images? The older versions have been known to corrupt the files.
See the following for more info.
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
Brian

I can not open PDF files in safari

I can not open PDF files in safari. How can I fix this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Can not open any files CS5 Win 7 64 bit

I can not open any files in Photoshop. I can open them in Bridge or LR. If I open a file in Camera Raw and try to go to Photoshop, PS opens and just sits there and looks at me as if I opened the program only.

Is this a new installation that has never worked, or is this a problem that has cropped up recently?
In any case, there are two things you can do that between them have a very good chance of getting things working for you.
1. As a diagnostic, click Edit - Preferences - Performance, and uncheck (disable) the [ ] Enable OpenGL Drawing setting, then close and reopen Photoshop. If this corrects the problem, then chances are good that your display driver needs to be updated. To do so, go to the web site of the maker of your video card (e.g., nVidia or ATI) and follow the links to the driver download that matches your hardware and operating system. When you've updated the driver and rebooted your system, re-enable the OpenGL Drawing setting (remembering to close and restart Photoshop) then re-test.
2. Clear all Photoshop preferences to standard defaults. To do this, press and hold the Control, Shift, and Alt keys IMMEDIATELY after cold-starting Photoshop from its shortcut or menu entry. If you're quick enough, it will prompt you. You'll need to go through all the preferences again to ensure any customizations you want are re-done.
Hope this helps!
-Noel

Can not open any files with Illustrator CC on windows 8.1

I can not open any files in Illustrator CC. It comes with an error message and shuts down. I run with the Danish version and windows 8.1. - help?!!

I just get this:
"Adobe Illustrator CC has stopped working - One problem was the fault of the program ceased to function properly. Windows close the program and notify you if a solution is found"
not useful..

I can not open NEF files from Nikon Df

I can not open NEF files from Nikon Df
Buongiorno a tutti,
qualcuno mi può essere di aiuto per utilizzare Camera RAW con i file NEF della nuova Nikon Df ?
Grazie infinite .
Hello everyone,
someone can help me to use Camera RAW NEF files with the new Nikon Df?
Thank you very much.

This thread has instructions for importing Nikon Df raw files in Lr5.3RC (by making them look like Nikon D4 raw files):
http://forums.adobe.com/message/5920044#5920044

Can not open output file on installtion

On installing Firefox, it comes up with a dialogue box saying can not open output file. Therefore, I cannot complete the porcess of installation

Hello alstoner,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Dear Mike...Can you send me the example by Labview 8.0. I can not open your file

Similar Messages

Maybe you are looking for