Dear oh dear, my new internal hard drive doesn't seem to fit

My sad little hard drive broke a few days ago, so I bought a Western Digital WD2500BEVE 250gb, transferred the little case and tab from my old one and slipped it into the slot. All seems well except that it appears to need to go a fraction of a millimeter further in so that I can get the L-shaped metal brace screwed back in. I know that the WD hard drive is the correct size - maybe I'm aligning it wrong?

Welcome to Apple Discussions!
WD2500BEVE is listed as EIDE which suggests it is not the SATA drive. This listing:
http://www.wdc.com/en/products/Products.asp?DriveID=346
Shows that the SATA drive is model:
WD2500BEVS
When you click on SATA 1.5 Gbs.
That's the drive you wanted for a MacBook. iBooks can take the model drive you got, but not MacBooks.
Message was edited by: a brody

Similar Messages

  • New internal hard drives, seems slow with Logic 8, how can i test

    Hi,
    I just bought a new internal hard drive, but it seems subtley too slow!,
    On a Logic 8 song i'm working on the tracks timing seems slightly off, it's kind of driving me crazy because at times it is subtle, and other times obvious.
    and 2 other things, one is an iTunes playback stalled twice, and that's never happened before,
    also, when working on a Word doc, the screen was not re-drawing properly. i had to repeatedly reisze the doc window to get it re-draw itself. this has never happened before either.
    is there a way to test this new hard drive?,
    thanks

    There are though all the ones I've used, TechTool Pro, Disk Utility, Intech Speedtools, none were 'perfect' or as good as the vendor's own utility which runs on Windows.
    But you might do something for us - include the drive make/model version, and, do a look up with Google and see if you get any helpful hits.
    How you have your system setup, number of drives and organization of files, can also have an impact.
    Off hand, WD Caviar 640GB is cheap and fast, or there are some 1TB drives that look good, too.
    Drives do break in over a period of days or first week, and it can help to break in and torture, zero the entire drive, run media scan, use a benchmark utility to graph I/O over the full drive.
    Check out Barefeats, they do a bit of drive testing benchnmarks and see what they use and results. Or Tom's Hardware.

  • How do I reboot my Macbook pro 2011 to a new internal hard drive?

    I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
    Thanks

    Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

  • Importing FROM external hard drive to new internal hard drive

    How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

    lksj wrote:
    How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
    assuming you moved the whole iTunes folder to your new internal HD, try this:
    launch iTunes with the options key pressed. this window will appear
    click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
    any luck ?

  • How do I transfer all data from my old internal hard drive to a new internal hard drive

    How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
    I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.

    Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
    I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
    Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it.

  • Installing Leopard and new internal hard drive at same time, best plan?

    Ok so basically the title explains what I need to do. I am currently travelling in Europe, and returning home to New York on Tuesday night. I have a new hitachi 250gb HD and will have Leopard waiting for me at home when I arrive, and will get right to doing this installation. I am writing on the discussion boards here because I am hoping the users here can give me their opinions on what is the best plan of action to do this whole install?
    So what I was thinking was, I should remove the hard drive that's already inside, put it into an external enclosure. Then, put my new blank 250gb hard drive into the macbook pro, close up the computer, then put the Leopard OSX install disk, and do a completely fresh install of Leopard. Then, after installing (or during installing?) I should run the migration assistant program to get all my files and settings etc. transferred over to the new internal hard drive with Leopard on it, from the old hard drive that will be plugged in from an enclosure as an external drive.
    Will this plan have any problems that I am not aware of? Is there a better process for doing this task? Any advice will be greatly appreciated! I am anxious to get my new hard drive into the computer because my 160gb is filling up, and dying so badly to use the new Leopard!!

    You could also put the new disk in the external enclosure, partition it using disk utility. Then make a clone of your current hard disk to the new external one using the restore feature in disk utility. Boot from the external disk and Install Leopard as an upgrade keeping all your files and setting. check everything is all running how I should and swap drives over. That's another option for you.

  • Need to buy new internal hard drive ~ suggestions of where to buy online?

    My 3 year old Mac Mini needs a new internal hard drive. I'm trying to find one online, but when I go to macsales.com for instance, I can't figure out the item I should be buying that will work. I'm clueless.
    Is there any online place anyone would suggest in particular?
    And what do I look for? Will it say 'mac mini internal hard drive' and will I know it will work in my old mini? (not intel).
    Does anyone know of a good place to take to have it installed in the Seattle area?
    Help! Thanks!

    With a little experience, replacing the drive on a Mac mini would take a little less than an hour, so I suspect you're being quoted the standard minimum for the job by those two sources. Whether you take that up or do it yourself really depends on your level of confidence. Opening the mini is a daunting proposition since there's no clear way to do it, and the plastic creaks and clicks as it's being levered apart with the putty knives, but it's actually very simple to do. Once the top is off, it is a fairly simply process to get to the drive, remove it, fit a new one and then reassemble. The only common issue from doing this work is failing to reconnect the fan control cable (symptom of having forgotten it is that the fan runs continuously on start up).
    I would suggest that if you have a flat, clear table, an hour to spare, two putty knives and a suitable screwdriver, you would likely find it a fairly easy job once you get started. Indeed, you might even think about increasing the system memory at the same time!
    One thing I would suggest is that if you have a digital camera, once you have the top open, start taking pictures as you progress through the job. That will help overcome the 'where does this go?' syndrome, should it strike!
    In terms of sources of drive, the reason Boece suggested OWC in the first reply is that they have already done the work of figuring out which drives are compatible and which are not. If you are in any doubt about which drive will work and which won't, it would make sense to source the drive from them, knowing it is suitable, than through another vendor where you may be less sure!

  • Best way to transfer data to new internal hard drive

    Hi,
    I just got a new internal hard drive for my macbook and I'm trying to figure out the best way to transfer all the data from my old hd to the new one. Basically, I would just like to make an exact copy of my old hd and put it on the new larger one. Thanks for the help.

    Will I simply be able to do a firewire transfer on the new internal HD is installed
    Yes. Use Carbon Copy Cloner with the sopurce and destination volumes reversed after installing the new drive.
    Additionally do I need a bootable copy of OSX on my external HD to do the transfer?
    Yes; the clone can act as this copy. If you copy everything with Carbon Copy Cloner, you will be told whether the drive will be bootable or not prior to the clone.
    (33676)

  • Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

    I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

    You should be able to do that.
    If you want to change the sizes of existing partitions this may help:
    Enlarging a partition

  • How do I backup to time machine with a new internal hard drive?

    My Macbook Pro's hard drive got corrupted about a year ago so I had to get the hard drive completely replaced. However, I wanted to start backing up my data to time machine so if the same situation were to reoccur, I would be better prepared. For some reason Time Machine does not recognize the new internal hard drive of the computer as it is supposed to. Could someone please help? thank you in advanced
    Current OS: OS X 10.8.4

    That error message is saying that it is attempting to setup a Time Capsule for Time Machine to backup your data on.
    Do you have a Time Capsule?
    Do you have an external Disk Drive?
    You can do a backup to the internal disk drive. It is worthless to do that.
    Allan

  • Questioning about Partitioning a new Internal Hard Drive

    I just bought a new Internal Hard Drive, Western Digital Caviar, 500 GB. I am trying to Partition the Drive but, there is a pull down menu which I am not sure what to select.
    On "Volume Scheme, I selected 1 Partition from the menu, BUT, what do I select on "Format"?
    It gives me these options:
    1. Mac OS Extended (journaled)
    2. Mac OS Extended
    3. Mac OS Extended (case sensitive, Journaled)
    4. Mac OS Extended (case sensitive)
    5. Mac OS Extended
    Free-Space
    I am not sure what to choose here, IF I have to chose anything. All I need is another HD where I will have music samples on it.
    Any help would be appreciate it.

    For normal purposes, use Mac OS Extended (journaled)

  • HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

    I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings.  However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

    What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
    To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
    Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
    After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

  • PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

    Good afternoon.
    I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend.  I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it.  It came with the stock 500 gb 5400 rpm internal hard drive.  At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds.  I am going to buy 16 gb of RAM from Other World Computing to install.
    I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
    I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
    I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
    Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
    But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
    I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014  It's on sale for $94.
    But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
    How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
    Here are my questions about replacing the hard drive:
    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much.  I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
    I would really appreciate any help and advice.  I've never switched out a hard drive before.
    PLEASE HELP !!!  Thanks!
    Here is the "About this Mac" Info:
    Macbook Pro 15-in Mid 2012
    Model Identifier: MacBookPro9,1
    Processor: 2.3 GHz Intel Core i7
    Memory: 4 GB 1600 MHz DDR3
    Software: OS x 10.8.5
    Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled).  This is standard with OS X.
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    There are arguments pro and con.  Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives.  If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time.  But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity.  The jury is still out on this debate.
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    No
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
    The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it.  Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    Not via Snow Leopard on this MBP.  See my response to #4.
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    No.  They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

  • Time Machine Problem - New Internal Hard Drive, Now Backup Takes Hours

    Need some help!
    Background.
    Almost 4 year old 24" aluminum iMac; 4 gb ram; 500 gb hard drive; OS 10.6.8.
    About 2 months after Alpple Care expired, the internal hard drive failed (New Year's Eve of all times!). Everything else working great.
    Had a Mac technician I know install a new 750 gb drive for me. I cloned back from SuperDuper, and was ready to go. The SuperDuper external is 1.5 TB, partitioned - one half TM, the other half SuperDuper.
    All apps, internet, mail - fine.
    I hooked up my existing Time Macinne (probably not a good idea), and the next backup failed.
    Did some research, and since I have plenty of archived backup anyway, decided that the best thing to do would be to erase the TM external, and start fresh.
    Did that, and as expected, first backup took a couple hours.
    The Problem.
    Now, every incremental backup takes 4 to 5 hours, even if no data has changed.
    "Indexing" lasts for 45 minues; "Backing Up" reads 600,000 plus files, which also goes on for 30 or 40 minutes (approx.), and wants to Calculate changes etc forever; then the actual backup starts out at 10 kb, and in 20 minutes is at 30 kb and then after about an hour I start getting into gbs and the blue bar progresses pretty fast after that. Then "Finishing Up" takes approximately 2 - 3 hours.
    Not right.  :~(
    What I've Done to Toubleshoot.
    First, I re-erased the TM external.
    Then reset PRAM and did an SMC reset on the iMac.
    Then backed up to TM again. The same problem persisted.
    So next, I repeated that process (other than backing up), and I also deleted from the Root Library/Preferences com.apple.timemachine.plist, and from Home/Library/Preferences deleted com.apple.finder.plist. Then rebboted the iMac. Then I did a Disk Utility verify of the empty external - all was/is fine. Then I ran DiskWarrior on the iMac and all was fine; repaired permissions on the iMac from DiscWarrior as well. Then, I did another TM backup to the external, which took a couple hours since it was backing up to an empty drive.
    Next 3 incremental backups still take 4 to 5 hours, even if nothing has changed on theiMac.
    The Request.
    Please if anyone can give me some easy to understand step by step options I might try to get TM working correctly again, it will be most appreciated.
    If I've left out any details that might assist, please also let me know.
    The problem computer is at home and I'm at work, so if any logs are needed, I can post those later today (but in that event, please tell me exactly which log to post and how to isolate it from System Profiler or Console (as there are many logs to choose from and I want to provide the proper info if someone needs to see a log to assist)).
    Thanks in advance!

    Pondini,
    Did every step in D2 (green box) - except did not reinstall Combo Updater which I did late last night.
    After that, did a TM backup - started at 6:15.
    All apps were off.
    Sequence of events and facts:
    At start, 434.03 0f 500.1 GB available on the external TM
    Last backup shown - 7:58 AM; Oldest Back Up - Yesterday at 9:56 (that's the 1st backup after I reinitialized the external for the 2nd or 3rd time trying to get this thing figured out)
    Upon starting and doing the backup -
    Preparing 250,000 (approx.) items (too quick to get the final number) - Parenthetically, this AM it was over 600,000; probably has to do with turning off Spotlight per your D2 instructions
    Next message -
    Backing Up 6.96 GB
    Hung at 2 kb to 90 kb for 20 minutes before progressing
    Ultimately, at 1.78 GB the  progress bar started moving rapidly (as it should) - so this isn't a cable connection issue - the Backup phase took 22 minutes, but from 1.78 GB to 6.96 GB took only a few seconds; I have seen this precise same sequence repeatedly the past 2 days
    Next - Backing Up (the candy cane blue and white progress bar)  - Preparing 140,000 items - took 12 minutes
    Now shows 426.95 GB available on the external
    Next - Backing Up (no count of items shown) - started at 7:05 and went until 7:45 (40 minutes)
    Next - Finishing Backup (blue/white candy cane progress bar; no count of items shown) - started at 7:45 - went until sometime after 8:15 (can't give a precise time because I need to sit down and eat :~)  )
    Backup completed (between bites of chicken) at 8:23.
    Over 2 hours - something isn't right.
    Also, TM Prefs tells me that the Latest Backup was at 7:44 - odd.
    Anyway - to take a step further, here's the TM Buddy widget info you might need:
    Successful Backup: 02:06:32.
    There is no log entry or data showing.
    Just as I sent this, a new backup started, and it appears to be going through the same routine, from Preparing  ....
    Gotta eat.
    Please post any further instructions and I'll do what I can tonight.
    Thanks!
    What is the problem? How do I speed this mother up?
    Thanks!

  • Installing new internal hard drive.  How do I safely clone my existing BOOTCAMP partition?

    I have a 13 inch Aluminum Late 2008 MacBook.  Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53).  Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory.  (Is it time to upgrade or what?)  I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive.  I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive.  No such luck.
    My current hard drive is partitioned as follows:
    Name:  Macintosh HD
    Format: Mac OS Extended (journaled)
    Size: 132.5 GB
    Name:  BOOTCAMP
    Format: Windows NT File System (NTFS)
    Size: 26.69 GB
    When I was partitioning the new drive I did so as follows:
    Name: Macintosh HD
    Format: Mac OS Extended (Journaled)
    Size: 973.51 GB
    Name:  BOOTCAMP
    Format: MS-DOS (FAT) ---  This was the only option that I was given that I thought would work.  I did not have the option of "Windows NT File System (NTFS) to choose from.  Question # 1: is that going to be a problem?  I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all.  However, I do HAVE to have that program.  Like I said it didn't give me the option to choose Windows so I didn't know where to go with this.  Any help with that would be awesome.
    Size: 26.34 GB  (I just used the same size that was current, or close to it.)
    I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives.  The first one went through fine.  (It took 2 hours and I went to bed before it finished.)  This morning I woke to see that it had gone through well.  I then started the process with the BOOTCAMP drives.  However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive.  Question #2:  Is it because of the Format type I chose when partitioning?  Or something else?  I am unsure where to go from here.  I would really appreciate any help that is out there.  I would love to get this new drive installed ASAP.  Thank you so much in advance!

    Well yes and no.  I succeeded with the clone.  All of the information seems to be there.  However, it isn't showing in the system preferences - start up disk -- as a start up disk option.  Therefore I assume it didn't clone correctly, or at least not in a way to use it the way I was.  I am thinking it may be a better idea to just run Parallels or a similar software program.  I rarely use the software that has to run in Windows.  And maybe that will be the easiest way.  I think I will still have to change the way I have it because I assume if it isn't running as it was before now I must have done something wrong.
    I am unsure of where to go from here.  But know that I really do appreciate your help. 

Maybe you are looking for