Dear sir thanks for new ios7;please see the calendar in hijri shamsi and compare it with original calendar! Why this difrence? Please compatible start of the years from 1st of farvardin month.

Dear sir thanks for new ios7;please see the calendar in hijri shamsi and compare it with original calendar! Why this difrence? Please compatible start of the years from 1st of farvardin
1392/01/01 = 21/march/2013

Apple does not participate in this forum, it's only used by users like you.

Similar Messages

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • I have a "new" CS 6. I had to resinstall mig computer (Dell workstation) with my programs. This time

    I have a "new" CS 6. I had to resinstall mig computer (Dell workstation) with my programs. This time it didn´t  install the Acrobat XI only the reader ...  Why? //2xha

    Q3miki please remove your current installation of Adobe Reader and run the installer for Creative Suite 6 again.  There is an option to install Acrobat Professional 11 from the Creative Suite 6 installation media.

  • Dear Sir, i have problem in my Iphone 5 that during receiving any calls always appeare message that error in application occurred please call support quoting error code 2907. I need to solve my problem

    Dear Sir, i have problem in my Iphone 5 that during receiving any calls always appeare message that error in application occurred please call support quoting error code 2907. I need to solve my problem.

    The problem this message always appeare when receiving the calls and requesting either accept or cancel.
    Can you advice me if i have wrong application or i need to remove some applications.

  • Dear sir  Thank you very much. I am not a computer davy. still I ail try to explain. I am in Chennai India. My service provider is BSNL. I have a broadband connection wit 4 mb speed - though I get only 3 to 3.3 mb. The TC is connected to the modem *** rou

    Dear sir
    Thank you very much. I am not a computer davy. still I ail try to explain. I am in Chennai India. My service provider is BSNL. I have a broadband connection wit 4 mb speed - though I get only 3 to 3.3 mb. The TC is connected to the modem *** router through ethernet in wired LAN1 socket. My iMac is connected to the modem in LAN2 socket through either net. Though the TC is permanently connected to the modem-router, it gets connected to the internet only if it is shown in the dock. If it is exited from the doc, it loses internet connection. I tried factory reset. Still the same problem. Therefore, unless the iMac is open and the Tc is shown in the dock, TC is not connected to the internet. Therefore all the time iMac need to be open and running. I hope, eih little knowledge I have explained. Thank you
    S KANNAN
    IRS(RETD)

    The TC is perhaps in the wrong mode..
    If you have a modem router the TC should be connected by ethernet and the computer plugged into the TC not the modem.
    TC will be in bridge mode.. but it can lose connection on a daily basis.. if you have that issue downgrade the firmware as later firmware is not reliable.
    I recommend 7.6.1 but the earlier ones are better on 7.5.2 .. anything more than 18mths old should go back to 7.5 firmware.

  • Please help! Major problems (performan​ce and lock-ups) with brand new W520 with Intel 520 SSD

    My company primarily uses HP machines but I've been a long time IBM (now Lenovo) fan so I recently had IT purchase me a new Lenovo W520 (product ID 42763LU).
    Once the machine arrived I had them do the following:
    Remove the 500GB HDD and replace it with an Intel 520 series 240GB SSD
    Remove the optical drive and install the 500GB hard drive that came with the machine in the optical bay (with the bay adapter of course)
    Format both drives and put a preconfigured windows 7 64-bit image on the SSD
    A general summary of the system is the following:
    Intel i7-2860QM CPU
    8GB RAM
    NVIDIA Quadro 1000M
    Intel 520 240GB SSD (primary HDD) [SSDSC2CW240A3]
    Hitachi 500GB HDD (optical bay) [HTS727550A9E365]
    Intel Advanced-N 6205 network adapter
    TouchChip Fingerprint Scanner
    The machine was a few days delayed getting to me due to "hard drive driver issues" (that's what I was told). When I received the machine I immediately noticed that it was much slower than I expected (I have a custom built i5 HTPC at home running windows 7 on a Crucial SATA III SSD that I was comparing it to) and I was experiencing frequent hangs (ranging from 30 seconds to multiple minutes), super long boot times, general “slowness” at times, and occasional lock-ups. Since our "baseline" laptop here at work is the "equivalent" HP workstation my IT guys have been less than helpful in helping me to solve this issue. Being reasonably computer savvy I decided to try to try to fix the issue myself. I performed the following “troubleshooting” steps:
    1. One of the first issues (errors) I noticed in the event viewer was errors related to the optical drive. Clearly the image they installed on the machine was not from a machine with the same hardware configuration. So, I decided to just wipe the machine and perform a fresh install of windows 7 from the disks (well, USB). After spending multiple days installing windows, performing updates, making sure all the drivers were current, and installing only the critical software I need, I was disappointed to realize that although I fixed the optical drive errors the machine was still slow, was hanging, and locking up regularly.
    2. Removed the cover on the machine and removed/reinstalled the drive to verify it was secure.Everything looked good.
    3. Verified the latest firmware is installed on all my Intel hardware. Everything seemed up to date.
    4. I performed a number of troubleshooting steps like booting the machine with/without the battery, with/without the HDD in the optical bay, installed/removed from the docking station, etc. and none of these things helped (also a note – occasionally when running on the battery I was hearing a strange “buzz” or “static” sound coming from the area around the SSD).
    5. Next I did some internet research and learned quite a few things. First, it sounds like others have had similar problems with this machine and/or SSD combo and there were quite a few options suggested to “fix” these issues. The general consensus for troubleshooting steps were:
    5.1. Download and install the latest Intel chipset drivers and AHCI controller drivers (overwriting whatever windows installs during updates).This didn’t fix anything.
    5.2. Turn off PCI express link state power management in the power manager. This didn’t fix anything.
    5.3. Disable superfetch, prefetch, indexing, defragmentation, page file, system restore, and hibernate. A few of these were already disabled by windows so in those cases I just verified they were disabled in the services and application editor. These things may have slightly increased performance but did not fix the major hang/lockup issues I was having.
    5.4. I followed online steps to edit the registry to disable the PCI link power management by adding ports, adding the required variables, and setting them all to 0. This did seem to have fixed the hangs and/or lock-ups but the machine is still much slower than I would expect (boot times are still pretty slow and it does “stutter” when I’m doing more than one thing at a time. Also a note here – I have the Intel SSD toolbox installed and I noticed that it was giving me a warning for DIPM not being optimized. I made the mistake of clicking “Tune!” and then started having the hang/lock-up issues again. I went back into the registry and sure enough the PCI link power management variables for ports 0 and 1 were set back to 1. I set them back to 0 and the hangs have gone away. I will not be “tuning” the DIPM through the Intel SSD toolbox again…
    6. I also fixed a couple of other minor errors I was seeing in the event viewer by disabling benign services and/or making slight timeout modifications (I researched each issue on the internet to verify they were benign before I implemented any changes). These fixes didn't seem to do anything other than make some of the errors/warnings go away. So, the list of errors/warnings has become much smaller but I’m still getting the following (maybe an issue, maybe not?):
    Event ID 37 for every processor saying that they are in a reduced performance state for xx seconds since the last report
    Event ID 10002 - WLAN Extensibility Module has stopped
    Event ID 4001 - WLAN AutoConfig service has successfully stopped
    Event ID 27 – Intel® 82579LM Gigabit Network Connection link is disconnected
    I suspect the WLAN errors have something to do with windows fighting with the Lenovo access connection tools?
    7. Since the machine still seemed slow I downloaded the program AS SSD and checked the performance of the SSD. When I compared my performance numbers to the benchmark numbers I found onlineI was very surprised to discover that I’m getting about 50% of the performance that I should (values below are read/write).
    Seq: 262.11 / 188.32 (s/b 504.58 / 298.28) [MB/s]
    4K: 15.83 / 44.92 (s/b 21.70 / 62.60) [MB/s]
    4K-64Thrd: 165.23 / 154.46 (s/b 241.38 / 234.08) [MB/s]
    Acc.time: 0.218 / 0.294 (s/b .0186 / 0.208) [ms]
    Score: 207 / 208 (s/b 314 / 327)
    Overall Score: 533 (s/b 797)
    One more note - it seems like my cooling fan is running at a high speed almost all of the time. This is probably one of my power settings (I think I have it set for max performance) but it's even doing this when there is no load (i.e. I'm using IE and just vieweing webpages - like right now).
    So, I apologize for such a long post but I’ve spent countless hours researching and troubleshooting this problem and haven’t been able to figure out what the heck is wrong here. Am I missing something simple or do you guys think I have a SSD and/or problem with the machine itself? To say that any and all help would be greatly appreciated would be a massive understatement – I’m on the verge of pulling my hair out and I really need this machine working as quickly as possible!
    Please let me know if you have any suggestions and/or need additional information. Thanks in advance for your help!
    -Erik

    Lol gotcha about the drive as an option. I didn't go SSD with mine. Do you have the latest firmware on your drive? It is supposed to be v1.97. Just checking (ah and I see item 3 so guess so). Do you have the SSD drive toolbox software installed?
    http://downloadcenter.intel.com/SearchResult.aspx?​lang=eng&ProductFamily=Solid+State+Drives+and+Cach​...)
    Seems some useful tools are in there. I can't say much beyond that with the drive. Oh. Why does your fan always run at high speed? Can you describe that?  I mean, are we troubleshooting the right kind of issue? Is there anything else going on with your system? I saw about the reduced core speeds message. what are your system loads like? Anything causing high cpu utilization? Could be something other than the drive causing your low numbers and lockups.

  • HT1766 I downloaded the new IOS7 on my iphone.  I can no longer sync up with itunes. How do I update itunes to sync up with my updated iphone?

    I downloaded the new IOS7 on my iphone.  I can no longer sync up with itunes. How do I update itunes to sync up with my updated iphone?

    If you go to iTunes on your computer click on the App Store and scroll all the way down .  In the bottom right of the screen is a map logo.  Click on that and then chose the flag for the country you want

  • I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my passwor

    I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.

    I had this same issue and got it resolved very simply when I contacted Apple SUpport
    Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
    > Go to Manage apple id and primary email address
    > Change it to the old apple id that your device is asking for
    > Save changes
    > Go to Settings > iCloud and sign out of the infomation
    > Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    > Change it back to the correct apple id
    > Go to the email address adn reverify the apple id
    > Sign back into iCloud on your device
    > Smile
    Article to back up my statement http://support.apple.com/kb/TS5223

  • My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

    My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

    Sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.

  • HT1379 Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Hold shift key down while booting should get you in
    go through this list and get back with me
    Step by Step to fix your Mac

  • Hi! My friend offer me a iphone 4s upgraded to ios7. The phone need and icloud account. and my friend didn't remember his email address and password. How can i bypass this. Please help.

    Hi! My friend offer me a iphone 4s upgraded to ios7. The phone need and icloud account. and my friend didn't remember his email address and password. How can i bypass this. Please help.

    Sorry, there's no way around Activation Lock. So, give the phone back to your "friend", as you will never be able to use it.
    Apple can't/won't help you.

  • I use macbook and lion os. I want to sync gmail contact with address book. For this i goto preference in address book and select "sync with google". I put my gmail details. However, the sync does not happen. Please help.

    i use macbook and lion os 10.7.2.
    I want to sync gmail contact with address book.
    For this i goto preference in address book and select "sync with google".
    I put my gmail details.
    However, the sync does not happen.
    Please help.

    You should have signed in with that address in the first place, but there is a workaround: go to System preferences>Mail, Contacts@ Calendars and add your @me.com address as an account there.

  • Creation of Z reports for client adding two more column that is Purcahse order and delivery dates with Internal order wise

    HI Experts,
    Can any one help me to add two more column for standard report that is purchase order and delivery dates for Internal order wise.
    But here problem is when i checked with ABAP team they said there is no standard functional module to add two column.
    Please note below :
    Selection criteria is: 1) controlling area
                                  2) Fiscal Year
                                  3) From date and To date
                                  4) Plan Version
                                  5) Order Group.
    My client suggested : S_ALR_87012993 this tcode to run, but we suggested with S_ALR_87013019 as in this tcode we can get all the details
    That is required output fields, as it is showing all details but on yearly basis, he wants this to be period wise and also Abap team is not able to find standard functional module in the second tcode as well.
    Out Put fields to Pop up
    1) Orders.
    2) Budget
    3) Actual
    4) commitment
    5) Alloted
    6) Available
    These are two additional column
    7)Purchase order
    8) Delivery date.
    Require your help to know which all tables are included to extract above out put fields please help me.
    Thanks in Advance.
    Regards,
    Sudesh

    Hi Preeti,
    Thanks for reply, can you please let me know is there any other way to show the output fields.
    As my client is very specific to run the report on period wise, i also tried to execute the standard tcode S_ALR_87013019 and were we are getting all the required outputs to pop up but this is on year wise, but we can also check by period basis by clicking on order number and actual period basis where we can see period basis.
    Also one more question,what is the commitment table which is popping up in this, please advise.
    Thanks in advance.
    Regards,
    Sudesh

  • I recently got an iPhone 4 out of nowhere it has decided to go to connect to iTunes screen/emergency calls only when I plug into iTunes it states we are unable to continue with your activation at this time please try again later, or contact customer care

    I have recently got an iPhone 4 out of no where it has decided to think that my headphones are in and they are not but does work with headphones in.
    Then later on within the same day it after turning my phone on and putting it on charge it comes to the screen stating to connect to iTunes/emergency calls only/no service so I connect it iTunes and it says we are unavailable to continue with your activation at this time. Please try again later, or contact customer care.
    HELP!

    the same problem but i used it already for 3 years my iphone 4, when i update to ios 6.1.3 version, now is failure like said.
    we are unable to continue with your activation at this time please try again later, or contact customer care
    any help please. i am here in saudi arabia city of jeddah.
    thank you very much in advance
    pabs

  • If i backup an app for example Music Downloader as it contains like 300 songs and now i want to replace my iphone 5 so when i restore the app from itunes do i get back all the content in the app or just the app itself ??..

    If i backup an app for example Music Downloader as it contains like 300 songs and now i want to replace my iphone 5 so when i restore the app from itunes do i get back all the content in the app or just the app itself ??..

    Hey Hussain,
    I am not sure whether the music will get restored.
    Anyway try this
    1.Connect iPhone to PC.
    2.Open iTunes
    3.Open iPhone Summary
    4.Go to Apps Tab
    5.Under File Sharing Section Click on Music Downloader
    6.Right side if you see your songs click on one song and press (CTRL + A).(hope you are using windows) and click  on save and then save to  a folder on your computer.
    7. Later just do steps till 5 to put to new iPhone then ...........
    8.Click on save and select the music files which u want to put in that app.
    9.Click on apply to sync.
    10.You should be having the music in that app
    Hope it helps,
    Rohit

Maybe you are looking for