Dearplease I want a driver for selphy canon cp 810 my os win 8.1 64 bitthank you

dear
please can i recieve an printer driver for canon selphy cp 810 my os is win8.1 64bit
thank you

Hello bigbobber,
If  you have issue in using Windows 8.1 Pro in the software  parallels in MAC?
About this issue, it is recommended to contact the related parallels support.
About the license issue, please read the following article about Buyer’s Guide and Microsoft software license agreement windows 8.1.
http://www.microsoft.com/licensing/about-licensing/windows8-1.aspx
It is recommended to contact the phone support if you have license issue.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • HT1338 Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    You may be able to download it fom here:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Just upgraded my MacBookPro to OSX Mountain Lion. Now unable to reinstall Capt.Installer driver for my Canon LBP3010 printer. Same installer was used in previous OS

    Just upgraded my MacBookPro to OSX Mountain Lion. Now unable to reinstall Capt.Installer driver for my Canon LBP3010 printer. Same Capt.Installer was used in previous OS.
    Got message that the software was not obtained from Apple or trusted source.
    Anyone can help solve this issue, do not wish to purcahse new printer, and Apple does not appear to be friendly to me

    Apple is still friendly, only became more protective - for your very best. Right-click on the installer, then "Open", and then you get a window offering you the option to run it. That's a ML feature. Again, for your protection.
    Independently, and as not only with Apple, a new OS X is sometimes different, and ML is that bit "pickier" with fully compatible software. So, even if your driver ran under Lion, it can be that it won't under ML. In that case please check Canon's website if they have a newer ML-compatible version, If not, also go and blame Canon. It's their responsibility to provide up-to-date drivers, not Apple's.
    Good luck.

  • I need a driver for a Canon C5420A multifunction printer

    I need a generic driver for the Canon multifunction printer C5240A; can someone help?  Thanks

    Hi SEB575,
    If you are having issues finding a driver for your Canon printer, you may find the following articles helpful:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    OS X Mountain Lion: If the software for your printer can’t be found
    http://support.apple.com/kb/PH10663
    Regards,
    - Brenden

  • Wanted bluetooth driver for my hp 15rt078tu model for windows 7 64 bit

    I want bluetooth driver for my hp 15 rt078tu model for windows 7 64 bit
    This question was solved.
    View Solution.

    Hi:
    This bluetooth driver should work for you...
    http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130390_1

  • HT3986 i want audio driver for macbook 13 - win7 please  :(

    i want audio driver for macbook 13 - win7 please         
    for my work  ...

    Basic tip and steps something like this:
    MacBook Pro audio sound fix
    http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
    Cirrus Logic CS4206A (AB 11)
    I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
    http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
    MacBook Pro No Sound in Windows 7
    Posted by Geek on +Jul 23rd, 2010+
    * You are running Windows on Macbook
    * You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
    *Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
    +(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
    +In case the above download link does not work google+ CirrusAudio.10.6.1.zip
    *Step 2:* Extract the right type of Driver
    (depending on your windows XP/ 7/ 32 bit/ 64bit)
    Step3: for Windows 7 only: Right Click on exe file of driver.
    Select Properties> Compatibility > run in compatibility mode
    Select Windows Vista from drop down menu and Click OK
    *Step 4:* Double click the driver and install.

  • MOVED: [VIA] want all driver for ms5187 ver.1 Plz

    This topic has been moved to Retired motherboards.
    [VIA] want all driver for ms5187 ver.1 Plz

    Quote from: Grayone on 08-December-05, 04:30:27
    Sorry     I did not notice the driver section grayed out.  Here is a link to the motherboard's via chipset drivers.  They have them broken down by operating systems.
    http://www.viaarena.com/?PageID=2
           Thx

  • I can't load the driver for a canon ir c2550.

    I can't load the driver for a canon ir c2550.  Installer gets to where it looks for the drive and never finds it.  Drive only has 18G of space left.  Help??
    I have an early 2008 MacBook Pro
    Thanks!!

    Thanks so much for your response
    I reset printer systems, and was only able to add Canon MG6200 series, either with Bonjour or Canon IJ Network, but cannot find the correct printer software for MG6250 (there is no option for any Canon MG printers) the only choice is Generic PostScript Printer.
    I have tried using this, but the print job is not going to the printer itself, it appears that it is, but then under the canon print box, it simply dissappears.
    Paul_31
    At this point is the printer connected to the Mac via a USB cable?
    Do you think that I should attach the printer with the old usb cable from my previous printer and try that appears to defeat the purpose of having a wifi printer    Or will this simply allow the computer to find the printer and then I can remove the cable?  Thanks

  • Looking for a driver for a canon mf4570 printer

    Hi,
    I just bought a Canon MF4570dw all-in-one printer and was told it would work with my iMac; however there is no driver for mac os and i can't find one. Ideas please?
    Txs,
    Gary

    Hello
    just look at canon web site
    http://usa.canon.com/cusa/consumer/products/printers_multifunction/black_white_l aser_multifunction/imageclass_mf4570dw#DriversAndSoftware
    HTH
    Pierre

  • I want JDBC driver for Sybase database...

    Hi All:
    Can any one help me with JDBC driver for Sybase database ? I have surfed the net, but not able to find a Sybase driver that works correctly.
    Also, can you please let me know if anything special needs to be done in case of Sybase database connection, apart from what we normally do to connect to a database like "Oracle" or "MS SQL Server".
    Thanks and Regards,

    And why do you think someone using Oracle might know the Competitor's drivers?
    Having said this: you should give jTDS a try:
    http://jtds.sourceforge.net
    Also, can you please let me know if anything special
    needs to be done in case of Sybase database
    connection, apart from what we normally do to connect
    to a database like "Oracle" or "MS SQL Server".It's all in the docs of the driver

  • Wanted: MS6932 Driver for Windows 98

    Please help

    Nasko,
    Win98SE has built in support for the IEEEE 1394 interface.  Therefore, there is no need to install a driver for MS-6932.
    Take Care,
    Richard

  • Missing files on installing driver for Sound Blaster Adio PCI 64v on win 9

    I've downloaded and run the file 373UP.exe. Then I got the message: Missing file eapci4m.ecw. So, I can't install the driver!!!
    Wher can I find this file?
    With tanks.
    P.S. I li've in Belgium, I'm dutch speaking and I bought in 999 a pentium 2 computer of Packard-Bell. Now I've installed win 98 SE and I needed the driver for my sound card!

    jorisvh,
    This knowledgebase case should cover how to load the wavesets (*.ecw).
    Cat

  • Need driver for Selphy CP400 for Mac OS X 10.9.5

    Hello!
    I received a Canon Selphy CP400 photo printer brand new and for free from my mother. I have finally gotten around to setting it up, can't use the disc since I don't have an optical drive on my Macbook Pro Retina. The Canon website says there is no driver needed to run the CP400, however when I try to add a printer in my preferences, although it recognizes the printer, it says it does not have the available driver to run it. Cannot find it anywhere! Asia, Europe, and UK all seem to have drivers for this model for a mac computer, but none listed in the USA.
    Help?
    Thanks!

    Hi @Carleone,
    Welcome to the HP Forums!
    I noticed that you are trying to setup your HP 1510 printer on your Mac OS X 10.9.5, and I am happy to look into this for you!
    Since there are multiple HP 1510, I am not sure of which one you are using. If you could please respond with your printer's Product/Model number, that would be a great help. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
    Hope to hear from you soon!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I need to install the driver for the canon image runner c3170i, I need to install the driver for the canon image runner c3170i

    I need help printing from my mac pro to a canon image runner c3170i, please! HELP

    You want to ask in a forum for OS X, not Windows or Boot Camp. And a "Mac Pro" refers to the workstation, not the notebooks.
    Start with Canon driver support.

Maybe you are looking for

  • No Apple Bumper available under the Case Program in the UK anymore?

    Hi, I purchased the iPhone 4 on 22nd Sept on the Apple UK site and just received it yesterday. So far so good. I've managed to load the Case Program app onto my iPhone 4 and was looking at the cases available and was surprised not to see the official

  • Can't install Apple Remote Desktop 3.5.1 custom installer on Lion 10.7.3

    Ever since Lion 10.7.3 was released, I've not been able to install the custom client installer package that I've made with Apple Remote Desktop 3.5.1. The error I get is "Remote Desktop Client Update can't be installed on this disk. A newer version o

  • User IDs mixed up

    When I was ill my husband setup our new iPhones by connecting them both to HIS computer. At the same time, he changed his email address and his iTunes user ID.  Somehow, during this process he managed to link his iTunes library to MY user ID so that

  • Worried about My new Hardrive in my T400 :(

    Hello I just got an Hitachi HardDrive http://www.newegg.com/Product/Product.aspx?Item=N82E16822145275 When I installed it and restored evrt with the DVD, I noticed that the Hard Drive is always doing a small ( small) vibration, it is not really annoy

  • Data is not populated

    Hi to all ,,        iam not able to see all the records in the production server, only some data records are coming..if i want to get all the data to production , what should i do. pls help me..    Thanks and regards chaitanya [email protected]