Deatail Region in OAF Table - Show not responding for first time click

I have added a detail region to my OAF results table. A link for 'show' appears for each record of my results table. When I click Show for a purticular record - the page refreshes, The control is going to Process Form Request but nothing is happening.
If I click the 'Show' for the second time for a purticular record ,Show functionality works and I could see my detail section under that record and the Hide functionality works fine too. Please advise if that is how it is suppose to behave or if we can change any property of the table to make it work for the firest time.
Thanks, Pradeep

Pathi,
Please try to have the WhereClause in the VO query as part of static definition itself. So you would only need to bind the parameter and execute the Query.
Try and let me know if that helped.
Thanks
Sumit

Similar Messages

  • My Firefox out of the blue won't start and shows not responding when I left click.

    I have uninstalled and reinstalled with no luck. It still show it as not responding. I have a MAC system. I have searched and can't find a fix. Please help.
    == This happened ==
    Every time Firefox opened
    == out of the blue ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    This issue is probably caused by the Yahoo! Toolbar.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Custom url scheme not working (for first time) IOS applicaiton

    i have created one distribution application also register custom URL scheme. First time after I installed application, and try custom URL link, it does not work.
    However if I lunch the application manually it will prompt me below mentioned message
    Are you sure you want to open the application ... from the developer iphone distribution ... ?
    i will click on continue, and after that custom URL link works fine with my application.
    Can Custom url link launch the application directly on installation (without manually launch application and contiue)?
    is there any settings, so we can make the prompt message off. So it will not prompt message.
    also i had tried to create new application from another enterprise account, and deploy on other server; then it do not prompt that message, but unable to figure out the reason .
    Thanks

    Are you exactly following the guidance in the iOS App Programming Guide for Implementing Custom URL Schemes? Do you get the same message the first time, no matter whether app has been loaded or not? Are you really using iOS 4 per your profile?
    "If your app is not running when a URL request arrives, it is launched and moved to the foreground so that it can open the URL. The implementation of your application:didFinishLaunchingWithOptions: method should retrieve the URL from its options dictionary and determine whether the app can open it. If it can, return YES and let your application:openURL:sourceApplication:annotation: (or application:handleOpenURL:) method handle the actual opening of the URL.

  • Script runs not corrextly for first time

    Hello,
    i have kind a strange problem.
    Always wenn i run my script first time (after opening Diadem), it works not corretly. Specificly creating a report goes wrong.
    When i start the script for second time (and each additional time) everything works fine and correctly?!
    For understand:
    - I do some (mathemtical) analyse  - always works correctly
    - Load/Append prepared ReportLayout, add curves, create text objects - doesn't work for the first time, then it alwas works correctly
      The mistake is, that all curves (that should be in several appended layouts and text objects) are added in the first loaded report sheet (though the reportsheets were appended)
    As i said, when i start the script second time (and each additional time) everything works fine as it should?!
    Thanks
    Solved!
    Go to Solution.

    Hello,
    yes i tryed with debugger step by step. No errors. Ironically with debugger step by step everything works fine (even for he first time)
    It looks like, when i run the script for the first time, the appended report sheets are not active, because all curves are added in the first report sheet.
    But why works it wrong only for the first time and then everything works fine?
    Thanks

  • I'm using Windows XP. I'm on cable high-speed internet. Firefox takes a really long time to load, and says "not responding" for a time before it finally loads, Any suggestions?

    If I use Internet Explorer, it loads almost immediately.

    Here is the fix, the problem is you dont have to setup memory at 30 but 48,
    [http://bloggermind.net/blogging_tools/software/firefox-7-stops-loading-pages-high-cpu-fix/ Firefox Stop Loading Pages FIX]

  • 'Core Sync' app is showing 'not responding'

    When ever I pick any desktop fonts from Typekit, I found it's not synced to my computer. I tried restarting the Adobe Creative Cloud. Then it will sync properly. Similar problem is there with Adoble Cloud files getting synced.
    Later when I check Activity Monitor, when every this problem arises 'Core Sync' app is showing 'not responding'. At times, instead of 'Core Sync' app, 'Creative Cloud' will be showing 'not responding'.
    Any idea how to fix this? It's being very difficult with work with Cloud files since every time I update a file on cloud need to restart creative cloud to upload the file to my colleagues.

    Hi,
    Would you be able to send me your log files so I can better see what might be causing this issue?
    You can find your log files at...
    Mac:
    /Users/<username>/Library/Application Support/Adobe/CoreSync
    Windows:
    C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
    'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
    http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
    https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
    please send them on to me at [email protected]

  • When i want to go another from a tab,it shows firefox not responding, for a while then opens that tab!this is embarrassing me a lot by taking so much time!!why

    I have two inconviniences with fire fox..
    1)when i want to go another from a tab,it shows firefox not responding, for a while then opens that tab!this is embarrassing me a lot by taking so much time!!why it happens?
    2) every time when adobe flash player is updated, it shows flash player can't be installed and it crashes! it says 'disable real player' though i never installed real player!!
    plz Let me know why it happens to me????

    1. Update firefox to the latest version 2. and disable real player in menu->addons->plugins.
    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!
    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Adobe pdf printer save dialog box opens in the background - progress bar shows Not Responding

    I have two users who have Acrobat X Pro version 10.1.4 that are experiencing the same things.  First, one person just changed laptops and the new one has a fresh Windows 7 Enterprise X64 image and new installation of Adobe Acrobat X Pro.  When he used the pdf printer for the first time(after opening the program and accepting the license agreement) he was in MS Excel '07 and chose file>print>Adobe PDF and then the progress bar came up and then showed not responding.  After he did this a couple of times with me standing there I noticed that the save dialog box was opening in the background because I could see the icon blinking on the taskbar.  He said that his old computer never did this and that it would always open up and ask where to save the file and never show 'not responding' on the progress bar.  The other person having the same issue is running the same version but she has had the program installed on her machine for a few months and an older version on before that. 
    Is there a way to make the dialog box show as soon as you print to the Adobe PDF printer?  What is causing this?  Is there another way to create a pdf from MS Office like the add-on? 

    I have two users who have Acrobat X Pro version 10.1.4 that are experiencing the same things.  First, one person just changed laptops and the new one has a fresh Windows 7 Enterprise X64 image and new installation of Adobe Acrobat X Pro.  When he used the pdf printer for the first time(after opening the program and accepting the license agreement) he was in MS Excel '07 and chose file>print>Adobe PDF and then the progress bar came up and then showed not responding.  After he did this a couple of times with me standing there I noticed that the save dialog box was opening in the background because I could see the icon blinking on the taskbar.  He said that his old computer never did this and that it would always open up and ask where to save the file and never show 'not responding' on the progress bar.  The other person having the same issue is running the same version but she has had the program installed on her machine for a few months and an older version on before that. 
    Is there a way to make the dialog box show as soon as you print to the Adobe PDF printer?  What is causing this?  Is there another way to create a pdf from MS Office like the add-on? 

  • Attempt to generate WebHelp (Primary Layout) after updates hangs and then shows "Not Responding"

    Hello!  I am attempting to generate after making a number of updates to topics in a large project using RoboHelp 7.  RoboHelp 7 was recently installed on my machine by an IT staff person. It has been several years since I worked with this project in RoboHelp and at that time we used RoboHelp 5.  I have attempted to generate WebHelp but the application hangs and shows "Not Responding" about half-way through Updating files.  When I look at the folder (test folder on my computer's Desktop) to which I try to generate, about 2/3 of the topics and subtopics actually show in the folder even though the generate process failed. I have tried to work with IT but no one there knows RoboHelp. I cannot identify (don't know how exactly) where the problem is and how to remedy. Can someone please offer some guidance?  I'm very rusty with RoboHelp's processes...it seems as though something has gone missing but I don't know what to look for and where to start looking!  A co-worker has also recently had RoboHelp 7 installed on his computer (per IT remote install) and has helped update topics other than those I've updated in the project. He also encounters this problem when he tries to generate the project on his workstation.

    Thank you, Peter!  The project is a large policy manual which resides on a shared network drive but we place a copy of the project's "working" folder on our computer desktops to allow updates and maintenance.  When we generate the project after making updates, the compiled project loads into a separate subfolder in that "working" folder and a member of our IT department pulls the files out of that folder to "deploy" the manual to our users. This process has worked for over four years, however, for most of that time, there has been only one person doing the work and that person is now out of the office for an extended period of time.  I rather got tossed back into the fray at the last minute when it was decided that a set of updates was needed by November 1--a deadline that has not been met, of course.
    Since posting the plea on the forum, I've had ongoing contact with an IT staff who tells me the best solution right now is to save the files we each updated, request a file restore back to the last known good state, and then try to re-incorporate our changes to the clean version. In the interest of time, we are pursuing that...your additional thoughts and feedback about the situation would be most welcome.

  • Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google

    Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google.
    You can't do anything, you should just wait.

    I'm getting a similar error over here. Sporadically some sites won't load specifically in Safari; they open just fine in Opera, Firefox and Camino though. This is really annoying.
    It's pretty clear it's nothing network related…

  • Question: What causes Thunderbird to show "not responding" when deleting messages

    Program does not respond for a few minutes when deleting one or more messages. Messages downloaded by POP3 account. There are no add-ins & plugins were temp. deactivated. Delete works OK in safe mode but not in normal mode.

    All these antivirus suites are getting too involved with things they have no business bothering and wind up sucking up all the resources available. I wish they would just go back to looking for and catching viruses.

  • Javascript causes Firefox to not respond for a few minutes.

    I have a website form with a large amount of dynamically generated javascript that uses jQuery to handle events. When clicking on radio buttons in the form Firefox 26 will get part way through then stop responding for around two minutes while showing (Not Responding) in the title. If I go into about:config and disable javascript.options.baselinejit.content the form works fine, if I enable that option FireFox becomes unresponsive part way through the form. This started recently but I don't know exactly which version is started on, Firefox 26 definitely has the issue for me. All extensions and plugins have been disabled and "Use hardware acceleration when available" is not selected. Also the form works correctly in Chrome 31, Internet Explorer 7, 8, 9, and 10.

    Hi keviga, would you be inclined to file a new bug for this? You can reference the Baseline JavaScript compiler as the problem. I guess the tricky part is figuring out what is going on in your scripts that is triggering the issue.
    You can submit bugs here: https://bugzilla.mozilla.org/

  • Firefox keeps "not responding" all the time ... is very anoring

    it happens mostly while using facebook's posting page (FB and the Zynga games on FB are the only thing I'm on most of the time I'm on line) ... I keep running into "FIREFOX NOT RESPONDING" all the time ... I'll go to click on a posting and nothing happens ... when i click again the page goes cloudy and that DARN blue wheel shows up (I hate the wheel) & at top of computer is says "Firefox not responding" ... my scrolling wheel will not work right ... jumps up & down the page or won't move at all ... always have to be refreshing the page or exit firefox & reopen ... looses connection a lot or is out of sync & has to be refreshed ... this started to happen several weeks back after I first downloaded Firefox 4 ... in fact I've had to reload it several times ... this is all very frustrating when trying to play my games ... I've defragmented, run both my AGV & windows washer programs several times but nothing seems to help ... had no problems with earlier firefox so tried to reload it but now can't get earlier version to work either

    Hi,
    Please try this: '''Tools''' ('''Alt''' + '''T''') > '''Clear Recent History''', choose '''Everything''' in '''Time range to clear''' and '''Cache''' and '''Cookies''' under '''Details''' and '''Clear Now'''. [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History].
    If the problem persists, please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • HT4060 My ipad2 is not responding for itunes

    hi there ... my ipad2 is not responding for itunes and it can  not switch off even with the sleep and on keys ... its been a year so no warranty on it. is there any way i can resolve the problem ?? pls.
    - Jagan Aiyappa.
    (Dublin)
    <Email Edited By Host>

    Hello jaganaiyappa,
    Thank you for providing the details of the issue you are experiencing with your iPad.
    I recommend following these steps for an issue like the one you described:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPad before performing the restore:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Additionally, if your iPad is not being recognized in iTunes, I recommend the following article.  I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Table does not exist for the sys user

    Hey Everyone,
    I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
    Thanks,
    Sarang

    Yeah i am using the query....
    SELECT * FORM SCOTT.EMP
    It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

Maybe you are looking for