Debit memo and Invoice reference

Hi dear all,
Please help me with the following situation. I am creating a billing document - Debit memo- with reference to an other docuemnt - Invoice. However, in the accounting document the nvoice reference is not filled and all the data are not copied - terms of payment and baseline date.
This isn't the case for the Credit memo, when I create a Billing docuemnt - Credit memo- with reference, the invoice reference in the accounting document is filled and all the data are copied - terms of payment and baseline date.
Please help me with advice how can I activate the invoice reference to be copied also for Debit memo.
Thank you,
Desimira

Dear Desimira,
once go thru VTFA Copy control assign allocation number as B-SALES ORDER NUMBER,
Refference number as B OR E accordingly your reqt.
Thanks
Nar

Similar Messages

Debit memo with invoice reference

Hi dear all,
Please help me with the following situation. I am creating a billing document - Debit memo- with reference to an other docuemnt - Invoice. However, in the accounting document the nvoice reference is not filled and all the data are not copied - terms of payment and baseline date.
This isn't the case for the Credit memo, when I create a Billing docuemnt - Credit memo- with reference, the invoice reference in the accounting document is filled and all the data are copied - terms of payment and baseline date.
Please help me with advice how can I activate the invoice reference to be copied also for Debit memo.
Thank you,
Desimira

Hi,
V will populate the fields from the Customer master data, but I want to populate from the original document that our Debit memo is created with reference to.
Thanks a lot for your answer.
Desimira

Creating a debit memo request with reference to an invoice

Hi,
An invoice shows wrong MWST value because of incorrect customer tax classification as Tax exempt. I corrected the cust tax classification to "Liable for Tax". Then I tried to create a debit memo request with reference to the incorrect invoice. Thats a requirement by the customer. Invoices with incorrect VAT are not to be cancelled. A specially created VAT only sales order (Debit memo request) is used to create a sales order with 0 net value and correct MWST . But while trying to create the debit memo request, the system picks up the same old condition record for the MWST. How to overcome this situation ?
The copy control for the item category from billing doc to debit memo request is set to "B" that is new pricing. I even tried to update pricing. But it does not work. Changing the Service rendered date or the pricing date to current date also does not help.
Please help.
Regards.

This is working fine. What I did was
1: create a new pricing procedure
2: made the PR00 condition statistical
3: using a routine calculate the MWST based on the PR00. But PR00 itself does not contribute to the net value. This part is working fine. I could create debit memos successfully.
The problem is if we change either the customer or the material tax classification after creating the invoice, and then create a debit request with reference to the incorrect invoice, the system still considers the old tax classfication and therefore the old MWST rate. If I create a debit request without reference, the new rate is applicable.
I hope I have made clear.
Regards.

Report to view SO-Invoice-Credit Memo-Debit Memo-with/ without reference

Hello Gurus,
Can any one help me for viewing the report where i can see Sales Order Invoice ,Credit Memo & Debit Memo with/without reference .
We are creating Credit Memo & Debit Memo without reference but uses the same Purchase Order Nos .
Please guide me on this...
Thanks.
Sameer S Barde

hi
u can use the standard t-code vf05n to see the list with reference to the document type...
do revert if question is not answered..
regards
Chander

Report to identify invoices, debit memos and credit memos

Hi,
Just enquiring if there is a report in SAP that will identify all invoices debit memos and credit memos issued within a particular date range.
Thank you.

Hi,
You can try VF05 as Navaneet indicated and also you can try VF05N (for only the header details), if you are using ECC 6.0
If you have VF05N, then you can tick 'Biling Documents in FI'. It will give you the billing docs for a date range and the ones that have been released to accounting....
Hope this helps
Thanks
Mukund S
Edited by: MukundHS on Jul 26, 2010 6:52 AM

Credit/Debit Memo Request with reference to Billing document via IDoc

Hello Experts,
It seems SAP doesn't support Credit/Debit Memo Request with reference to Billing document via IDoc. Via IDoc, we can create sales document only with reference to contract or quotation but not with reference to billing/invoice document.
Wanted to check if anybody came across such requirement and what would be the best way to acheive (Other than custom program using BAPI).
Additional Information: Its ECC 6.0 Environment with AFS 6.03
Appreciate your help.
Thanks,
Shekhar.

Please Help... it is Urgent... Thank you

Debit memo and Credit memo

Dear Expert,
I always confused on Debit memo and Credit memo...especially the business scenario behind and how it is reflecting in SAP system.
Let's take this example:
e.g the Price in the main Invoice is lesser than the actual price, and the difference needs to be recovered from the customer.
My analysis:
"The invoice is lesser than the actual price", Means Product should cost 100 USD, but we billed customer only in 80 USD, there are 20 USD difference. Customer should pay us the rest 20 USD. So our Account receiivable should be increased. So we need create Debit memo to customer and ask them to pay the money. Customer received the Debit memo, they will create credit memo and send it to us said they will pay the money.
Am i understanding correct??? Please kindly share in case you have better simple example. Thank you very much.

Your understanding on the subject is absolutely correct.
Let me share an another example with you for debit memo.
These manufacturer of nuts and bolts. Previously they have 100 nuts in one pack, but then they changed it to 120. But the order which was already made for 10 pkts delivered 1200 nuts instead of 1000. So they require to raises Debit memo.
But, these Debit memo generally avoid, b'coz people take at most care in creating a invoice. And people do like to pay when they are receiving end.
Where as, Credit memo can be result of return or complaint of defect or less quantities delivered.
Well, their behavior is control by SD document categ at billing doc type (Tcode VOFA)
- P is for Debit Memo (L2)
- O is for Credit Memo (G2)
These SD document category classify for the different types of documents that you can process in the sales and distribution system (for example: quotations, sales orders, deliveries, and invoices). So, these determines how the system stores and keeps track of document data. It enables the system to provide you with status information about delivery processing, billing, and documents that are used for reference (for example, inquiries and quotations).
So, if we summaries it,
Credit memo - Created to reduce the amount of an existing vendor payable, or customer receivable.
Debit memo - Used to recover costs from another department or faculty. May also be used to correct an incorrectly posted entry.
Hope this suffice your requirement.
Thanks & Regards
JP

Need Debit Memo and Credit Memo

Hi,
What is the purpose of Debit Memo and Credit Memo, Is it bothe useful for Customer and Vendor.
If any body having document on this pls. What are the steps need to process.
Urgent
Rgds
sunfico

Hi,
Good morning and greetings,
You can raise a Credit Memo for a Vendor using the transction code FB65 (without reference to an invoice) or MIRO (if it is with reference to an invoice) and the system would pass the following accounting entry
Dr. Expenses A/c
Cr. Vendor A/c
This particular document would have a payment term and payment due date. While running Automatic Payment Process, depending on the payment method the system will pick up the document and create a cheque / electronic transfer etc for the vendor with the following entry
Dr. Vendor A/c
Cr. Bank Clearing A/c
In the case of Customer you can account the credit memo (without reference to invoice) using FB75 or VA01 (Order Type CR, if it is with reference to an invoice). While you create the billing document for the order type CR the system would raise the following accounting
Dr. Expenses A/c
Cr. Customer A/c
This particular document would have a payment term and payment due date. While running Automatic Payment Process, depending on the payment method the system will pick up the document and create a cheque / electronic transfer etc for the customer with the following entry
Dr. Customer A/c
Cr. Bank Clearing A/c
Hope this meets your requirement...Please reward points if found useful
Thanking you
With kindest regards
GVR

Sapscript for Debit Memo and Credit Memo

I want to create the debit memo and credit memo scripts.
I am not getting the standard scripts and output type so that i can modify it and according to my requirement.
Please let me know the standard sapscripts for the credit memo and debit memo.

Hi
use the same Invoice Script/smartform for Credit/debit memo's
INVOICE
Output type         : RD00
ScriptForm Name     : RVINVOICE01
Driver Program Name : RVADIN01
smartform name      : LB_BIL_INVOICE
Smartform Driver Pgm: RLB_INVOICE
Regards
Anji

Debit Memo Request with Reference to Service Order

Hi Team,
I need to create the following business process
Service Notification -> Service Order -> Debit Memo Request -> Debit Memo.
I'm able to create the notification and the service order. However while creating the debit memo request with reference to the service order I'm stuck. Not sure where and how do I give the reference document number for the data to flow from the Service Order to Debit Memo Request.
Regards
Nadarajah Pratheb

Hi Nadarajah,
The following may help you.
1.Check the sales document category of the service order you are using.
2. Check which kind of document given in the with reference screen has the same sales document category.
3. For that document type, enter the service order as the reference.
4. Now you can see the details getting copied to the debit memo request.
5. Make sure copy controls are properly maintained from service order to debit memo request.
Please assign reward points if it helps.

How to determine the credit memo and invoice in table RBKP?

Hi all,
I want to specific the credit Memo and invoice in the table RBKP using MIRO.
Does any body know that any field can be specific that ?
Regards,
Luke

Hello
The Field XRECH - Invoice will be populated with an "x" if it is an invoice else will be blank if it is a credit memo in the table RBKP.
Regards
Anis

How to get vendor name and invoice reference details in asset register

Hi Experts,
My client requirement is he want to see Vendor name and invoice reference filed in asset register.
Is there any standard reports relating this requirement.
Kindly Provide valuable information relating to this issue.
Regards
Madhan

Hi Madhan,
Let me know the t.code which you are getting asset data.
Thanks

Debit memo and credit memo rule

hi
may i know why there is debit memo like bank transfer(debit memo), returned debit memo, check debit memo
and credit memo like check credit memo through bank
in posting rule.
what is the meaning of debit memo and credit memo in posting rule of electronic banking.
thanks

hi elina,
Debit Memo - It is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
Credit Memo - A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
T.codes FB75 or FB70
To create Credit / Debit Memo request:
- Use the same procedure that you use for Creating Sales Orders i.d T Code VA01
- Give Order Type as CR for Credit Memo and DR for Debit Memo reuest
While creating the request you have to enter Customer Number, Reason for the request. and Material and its quantity. Once the credit or debit memo request is released you can create credit or debit memo. The credit memo request will be automatically blocked for checking with Billing Block 08 (to check credit memo) & 09 (to check debit memo) for the sales order type CR
ranjit

Debit memo request with reference to the credit memo request

Dear SD Consultants,
I have a business scenario in which I create a credit memo request with reference to a debit memo request but the problem is that ,i can create many debit memo requests with reference to the same credit memo request even if the all target quantity was referenced , I still can create many debit memo requests with reference to the credit memo request so can any one tell me how to restrict creating debit memo request with reference to the credit memo request up till the all target quantity was referenced.
Regards,
SD Consultant

Dear Saju.S,
I have checked all the positive/negative values in the item copy control but none of the values works as i still can create many debit memo requests with reference to the credit memo request.
Regards,
Sd Consultant

Debit memo and credit memo reference issue

Dear all,
Here there is case report from our clients:
1) Create a credit memo request CR
2) Post CR with billing type G2
3) Create a debit memo request DR with reference to previous billing doc G2
4) Post DR with BT L2, but it fails when it is released to accounting. The error message shows:
---> Item specified for invoice reference is not an invoice item
       Message no. F5348
      An invoice reference to a vendor credit (vendor in debit) and to a
      customer invoice (customer in credit) is not possible.
Hence, there is the questions:
1) It's SAP standard that DR could not be refereed to G2?
2) If so, why system allow user to do it when she/he creates the DR?
Thank you,
James

Hi,
I just want to tell you this is not the standard practice.
Normal process
order >> delivery >> Invoice
Now here two scenario;s
Scenario 1 - Customer return or some other reason customer canceled and you want to credit him
Credit memo request(reference to invoice) >> Credit memo
Scenario 2 - Earlier invoice is wrong(wrong price) and you wanted to charge customer additional some amount
Debit memo request >> Debit memo.
kapil

Debit memo and Invoice reference

Similar Messages

Maybe you are looking for