Debit memo will be finded two record after be modified and reconfirmed.

We have set two types of debit memo in system, itu2019s LV and DR, it have a process of confirm before invoicing, when a new LV debit memo has been confirmed first then revoked, it has been modified and reconfirmed second, we found the LV debit memo built two terms in billing due list and the first record was remained even the memo was deleted, so I think it may be a bug of system

voiceoverworkshop wrote:
The gist of it is, run the phone line (with caller) through the telephone interface and into a channel on the mixer, where you can control the callers volume, and tweak the eq (if the mixer supports that). Run your voice through the microphone, into another channel on the mixer, where you can control your volume and tweak your eq if the mixer supports it. Run the output of the mixer to Audition.
Nothing wrong with this at all, but I think that one particular point isn't perhaps quite as clear as it could be - and that is that ideally, you should pan the channels (assuming it's a stereo output) so that for the initial recording, the caller is on one channel, and that you are on the other. That way, you don't have to worry so much during the interview that you're keeping all the levels exactly as they should be, and can concentrate on the interview itself. Then, after the event you can optimise just the caller channel so that it sounds best, without worrying about having to select bits of caller from two channels mixed.
The other thing I should mention is that the best results I've had from doing something similar involve a small mixer, with outputs panned pretty much as described, and using Skype. With a little care, you can almost get it sounding like the caller is in the studio with you.

Similar Messages

Single record in query are splitted inot two record after creating the view

HI ,
We have created one query and when we execute with characteristics combinations we get some record.
we have created the view on the same query and when we execute the view ,the same record is splitted into 2 lines with some of the key figures are showing in one line and remainig are in other line.
please suggest here.

Look at your source data. Keep in mind that your queries are just that.. queries. The number of rows of results is not a reflection of the number of database records you have in your infoprovide. It is what your query asked the infoprovider to give you.
For example:
You have two records. Both records have the same 'customer'. One record has document number "A", the other has document number "B". Record "A" has key figures Sales and Profit, Record "B" has key figures Quantity and Margin.
Query 1 asks for Customer, Sales, and Margin. It will return both records A and B as one row of data, with the Sales data from record A, and the Margin data from record B
Query 2 asks for Customer, Document number, Sales, and Margin. It will return two rows of data... the first showing record A and Sales but no margin, the second showing record B and Margin but no sales.

Voice memos will not play full recording

I have a 4 hour 46 minute meeting recorded but can only play the first 2 minutes and 2 seconds of the recording.
As you can see from the screen dump above the recording shows 4h 46m 9s but the player at the bottom only allows the first 2m 2s to be played. The recording will sync to my PC but again only the first 2:02 is copied across.
Does anyone know why this happens and how to recover the original 4h 46m recording?
Andrew

I just had the same problem with a 2:10 minute voice memo only sending or playing back the first 12 seconds. theres nothing anywhere on the internet to help me. Did you figure out what to do?

Two problems after i installed and retore my powerbook

Hi guys,
Two issues still remain in my powerbook after i restored my old setting from my back up drive to my new internal HD...
1. Well, after several attempt to get my powerbook to sleep probably, zapped the PRAM and i think i have resetted PMU as well. I have upgraded to OS 10.4.9. Still my powerbook doesn't sleep accoring to the setup in the system preference. Anyone can suggest me something else to do?
2. For some reasons now when i am using dial up to connect to the internet, the system just keep displaying connecting to the internet while the connection is established. Took me a while to realized that cuz i thought something happened to the modem. When i opened the "internet connect" in the summary, it still says contacting PPP server. Why is this? the system didn't detect any internet connection from the dial up yet i am able to access the internet. The system was able to detect my office's LAN, but why not dial up?
From the look of these symptoms, does this mean my OS is not stable now? Everything else runs ok though...

When I allow thumbnails to be generated, it can't find two (probably deleted awhile back) and now gets hung up and I have to force quit. What should I do?

Using latest version of iMovie. Have two external harddrives for my movies. Decided to finally allow "generate thumbnails" run. While running, it says it can't find a couple clips and gets hung up - have to force quit. What can I do?. Also, anyway to speed things up? Loading takes forever. Thanks for any help!

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Why is my Garageband freezing after a few seconds of recording after recent iTunes and other updates?

I use garagband regulalry for voice recording. It now freezes after a few seconds(if that) of recording. I use an Audio Technica usb mic with no problems. I remember this happening with GB afer another OS upgrade in the past.. Is there a problem or should I be looking for something on my setup? I run 14gb of ram, have a timemachine connected and use an apogee duet.

No problem ; if you look at the question you posted initially - your forst post-, it is signed with a profile signature as the last line:
MacPro, Mac OS X (10.6.1)
and that made us think, that you still are using Mac OS Leopard, where the user library in your Home Folder is visible and easily accessible.
You can change your profile from the "your Stuff" drop-down menu in the upper right corner of this webpage:
Regards
Léonie

Find duplicate records withouyqusing group by and having

I know i can delete duplicate records using an analytic function. I don't want to delete the records, I want to look at the data to try to understand why I have duplicates. I am looking at tables that don't have unique constraints (I can't do anything about it). I have some very large tables. so I am trying to find a faster way to do this.
for example
myTable
col1 number,
col2 number,
col3 number,
col4 number,
col5 number)
My key column is col1 and col2 (it is not enforced in the database). So I want to get all the records that have duplicates on these fields and put them in a table to review. This is a standard way to do it, but it requires 2 full table scans of very large tables (many, many gigabtytes. one is 150 gbs and not partitioned), a sort, and a hash join. Even if i increase sort_area_size and hash_area_size, it takes a long time to run..
create table mydup
as
select b.*
from (select col1,col2,count(*)
from myTable
group by col1, col2
having count(*) > 1) a,
myTable b
where a.col1 = b.col1
and a.col2 = b.col2
I think there is a way to do this without a join by using rank, dense_rank, or row_number or some other way. When I google this all I get is how to "delete them". I want to analyze them a nd not delete them.

create table mytable (col1 number,col2 number,col3 number,col4 number,col5 number);
insert into mytable values (1,2,3,4,5);
insert into mytable values (2,2,3,4,5);
insert into mytable values (3,2,3,4,5);
insert into mytable values (2,2,3,4,5);
insert into mytable values (1,2,3,4,5);
SQL> ed
Wrote file afiedt.buf
1 select * from mytable
2   where rowid in
3 (select rid
4      from
5     (select rowid rid,
6              row_number() over
7              (partition by
8                   col1,col2
9               order by rowid) rn
10          from mytable
11      )
12    where rn <> 1
13* )
SQL> /
      COL1       COL2       COL3       COL4       COL5
         1          2          3          4          5
         2          2          3          4          5
SQL>Regards
Girish Sharma

Find a record that doesnt exist and display a message

When I run the following query why wont it display the word 'FAIL'.
SELECT
CASE
    WHEN table_name IN('DBA_OBJECTS') THEN 'PASS'
    ELSE 'FAIL'
END TABLE_EXISTS
FROM dictionary
WHERE table_name = 'DBA_OBJECT'
;Ben

Hi Benton,
The query filter (WHERE table_name = 'DBA_OBJECT') cause zero record to be returned.
To trick you can use aggregate function which always return single record even if record is found or not. If no record is found then NULL is returned.
SQL> SELECT CASE WHEN MAX(table_name) IN('DBA_OBJECTS') THEN 'PASS' ELSE 'FAIL' END TABLE_EXISTS -- OR NVL2(MAX(table_name),'PASS','FAIL') TABLE_EXISTS
2 FROM dictionary
3 WHERE table_name = 'DBA_OBJECT'
4 AND ROWNUM = 1
5 /
TABLE_EXISTS
FAIL
{code}

ITunes will not find all songs in a folder and add to library

I just got an iPod for my B-day (thank you my friends). So I installed iTunes and wanted to have all the songs I have imported into my iTunes library. But I see a lot of the existing MP3's are not added. I have no clue why this is and how to fix this.
I have seen that some MP3's with blank tags are not in added, but I really hope that is not the root cause. When I select the whole disk with my MP3's as the source, only about 6500 of the 10,000 songs are added. I hope I do not have to go fix 4000 songs.
I really need some help here. Is there a way to have iTunes add all songs or does somebody at least know why it is not adding them?
Thanks,
Peter

right click on name of song and select create aac version and then sync again.
Peace, Clyde

Firefox will not start up even after I uninstalled and reinstalled.

I even did a system restore to back before the problem started in case it was a OS problem. I did notice a firfox safemode file in system startup which was not the location I installed to. There are icons on my desktop and start menu. I recently switched to Panda Secuity so I uninstalled that and switched back to System Mechanic [used for several years, worked fine with Firefox] to see if it made a difference, it did not. Any help or suggestions greatly apprciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618)

One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]]. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
~~~~~~~~~~~
If that does not solve the problem, [http://support.mozilla.com/en-US/kb/Managing+profiles#Creating_a_profile create a new profile] Then, Recover your data from the old profile. See http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile'

Revoke the initial version of the site after being modified and saved

Hi All,
I have modified an existing site present in SharePoint2010 and saved it. Now I want to get back to the initial site content.
Is there anyway I can revoke the original site?
Thanks in advance!

Hi,
Just in case you need, I find some references about reset to site definition:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/1ca8c1e9-536b-4334-80d5-b44bf28d5b34/sharepoint-2010-reset-to-site-definition?forum=sharepointgeneralprevious
https://support.office.microsoft.com/en-us/article/Reset-a-customized-page-to-the-site-definition-27a748e8-3787-4159-a8e6-ed29ca2b2e8f?CorrelationId=d70ef0fe-6a38-48d1-bb67-9e2295059dd0&ui=en-US&rs=en-US&ad=US
For example, you might want to reset to the site definition when:
Your customizations don't turn out as well as you had hoped. For example, although the customizations might look how you want, some important functionality in the master page was accidentally removed.
Regards,
Rebecca Tu
TechNet Community Support

Will lookout integrator system allow you to modify and save existing runtime/development applications

We have many customers that are using Lookout. All have the Runtime/Development version. I would like to know if the Lookout Integrator System license will allow me to save a customer's process to a floppy disk from their machine, allow me to open it from my machine (with Lookout Integrator System license installed), modify the process, save it back to a floppy disk and copy the process to the customer's machine.
My goal is to be able to "develop" and or modify a customer's process at my office then copy it to customer's machine with modifications.
I also employ three other Lookout programmers. Will I have to purchase multiple integrator licenses or can I install one license on four machines?

Yes, you are able to open the customer's process, modify something and then copy to the customer computer. Lookout Integrator software is exactly what you need.
But you have to purchase 4 licenses if you want to install on 4 computers.
Ryan Shi
National Instruments

Single Debit Memo Request from Multiple orders - RRB

Hi,
I am wondering if it is possible to get Single Debit memo request from multiple Service orders after running DP90/DP97?

Hello
It is not possible Single Debit memo request from multiple Service orders after running DP90/DP97 in STD SAP.Even Z development will not possible for this.If even some how Z development possible.You will face billing process inconsistency.
Br
Rakesh

Credit Memo and Debit Memo extraction by extractor

Hi,
I've to extract data from 2lis_13_vditm datasource.
Let us say if credit memo and debit memos are coming from this then key figure values are going to be multiplied with -1 for credit memo and debit memo will come +ve values correct?

Hi
This may be helpful.
use the same Invoice Script/smartform for Credit/debit memo's
INVOICE
Output type : RD00
ScriptForm Name : RVINVOICE01
Driver Program Name : RVADIN01
smartform name : LB_BIL_INVOICE
Smartform Driver Pgm: RLB_INVOICE
Reward points if useful.
Thanks & Regards
vinsee

Compare two records within a view

Hi,
I wonder if it is possible to compare two or more records within a view, and how to do it.
Thanks in advance.

M. Comi wrote:
I wanted to compare two records of the view and see if they are the same or not...
My data are as follows:
Soglia Ingresso_CL_PF 10 10
Downgrade MDP 3 2102 2101
I want to check if the "downgrade" records have the same values for the second and the third column, and in this case replace the values on the second record.
But I did it with a select on the same fields of the original tables, plus two fields obtained with lag function...
I don't know if it is clear or not, the important is that I got what I wanted.Sorry, it's not clear.
Are you still having a problem? If so:
(1) Please describe the problem.
(2) What results do you want to see from the sample data you posted?
(3) Is the second column of
Downgrade MDP 3 2102 2101'Downgrade', 'MDP', 3, 2102, 2101, some combination, or NULL? When posting data, the most helpful thing is to post INSERT (or CREATE TABLE AS ...) statements. The second-best thing is to post formatted data. Type {code} before and after sections where spacing is important, and post column headers.

Debit memo will be finded two record after be modified and reconfirmed.

Similar Messages

Maybe you are looking for