DEBMAS with only part of contact persons?

Hi there,
if we send in a DEBMAS IDoc that contains only a subset of contact persons of a customer, the inbound process will remove all other contact records from KNVK. We tried different MSGFN values, without success.
Is there any way we could send via DEBMAS only updated contact persons without loosing existing contact records not beeing sent with current IDoc?
Best regards,

Hi Gordon,
this is incorrect.
ADR3MAS is part of address management.
It contains the address part of a contact persons.
This is not directly related to customer contact person.
Distributing ADR3MAs will never create a customer contact person on its own.
If send alone, it will only creates an orphaned contact person address.
What is correct in your reply is the fact DEBMAS do not distribute 100% accurate address data.
So to succeed to have a completely correct and accurate customer master distribution you MUST setup a distribution where the Address idocs ADR1MAS, ADR2MAS, ADR3MAS are sent as well as DEBMAS idocs.
Alain

Similar Messages

NWIdM support with CRM Ecommerce b2b Contact Person

We are using NWIdM in CRM eCommerce B2B scenario. B2B Scenario uses BP:Contact Person and also uses customer hierarchy which is in CRM downloaded from ECC. Wanted to know if NWIdM supports Contact Person Business Partner and can assign Internet User role to contact person and allow me to assign the contact person to different customers in hierarchy?

Hello Dan
That is a nice option. You can achieve this requirement using Integration events also, but it require a huge web services development
1.Create the integration event on create / Update SR
2.Create a batch process to read that Integration event Queue,(Development)
3.Use the outcome of Queue to get the changes and IDs (Development)
4.Send the Automated mail by program (Development)
5.Delete the Queue.
Dinesh CRMIT

Printing to PDF creates document with only part of the printout, improperly sized

I am printing from a windows application with my Adobe Acrobat Standard 10.1.9, and when it prints (to a standard Portrait size document), only about 25% of the document appears in the PDF, as if I had told it to zoom in on the document.
I want the PDF to comtain the complete document, fit to one portrait sized sheet of paper. I want this to be the default behavior.
Help!

Ok, I think I found what needs to be changed, but I cannot set it "permanently" - that's what I need to figure out now.
When it comes up with the print dialog, I choose Adobe Acrobat as my printer, and then in the print dialog, there is a properties button. That opens a window and one of the options is labeled "Adobe PDF Page Size" - this seems to default to be blank. If I set that to "Letter" everything works as I want.
So the question is, how do I make "Adobe PDF Page Size" default to "Letter" under the Adobe Acrobat properties?

Testing Loads with Only Part of a File

I'm trying to figure out how to test my load processes by loading only the first 100 or 1000 records instead of an entire file of 70,000 records. This process will save me considerable time in testing my mappings. I've tried a few ways like limiting with a where clause and rownum <1000 without success.
Does anyone know how to do this?

Jim,
There are a few ways to do what you would want to do:
- Rename the current file to something else, create a copy with the same name as the current file and remove all but 700 records.
- Add a filter to the mapping, using a condition that only the first approximately 700 records would fulfill (I presume you use SQL Loader to load the data), re-deploy and then execute.
- If you use external tables, you can do a regular filter, using a reference to rownum.
Hope this helps,
Mark.

I just finised with brush tool and eye driopper earsing part of the backgorund and adjusting ther rest of the image. I now want to take the image make it transparent and incert it into another file with only parts of this file showing through. Any sugge

As, we can all see I have been working for so long I can no longer spell therefore please forgive my errors

It sounds like he simply wanted to select an element in one document and copied it over to another document.
One suggestion I can give: Step away from the computer every once in a while. It's not healthy to just sit there for hours on end. Get up for a few minutes every so often.

Target group with customers and contact person

Hello at all,
I have the following problem:
I want create a target group from an externel file. This file includs CRM customer numbers and the contact person numbers.
When I use the standard import functionallity I have only the customers in the target group or the contact person. But I need both in one target group.
Is it possible to generate this target group in BW and send it to the CRM?
Thnaks for help
Best regards
Matthias Buchheim

Hi Werner,.
I assume you want to select for Organizations (BUT000 Type 2) and you want to see in the Target Group the Contact Persons which are assigned via Relationship to the Orgnizations.
Create for example a Datasource with Infoset CRM_MKTTG_BP_ORG, and under Details for Business Partner use BUT000_PER-PARTNER_GUID.
In Field Function Module maintain CRM_MKTTG_PF_BP_TAB_TO_CP.
Create an Attribute List an assign the Datasource. After Creating the Target Group you will see the Organizations with all the assigned Contact Persons via Relationsship.
Regards
Andreas
Another Tip: Create a Target Group for Persons, assign it to the Campaign, and now set the B2B Flag. Depending from your SP Level you have to apply a note so that the B2B Flag is visible (1263915)
If you set the B2B flag you will get Communication Data for letters, for a Call List from the Relationship.
Regards,
Andreas
Edited by: Andreas Pauli on Apr 29, 2009 10:18 AM

Delete data from DSO only with a part of the key

Hi experts,
I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
I already found this thred in SDN but this is for BW 3.5:
Delete data from ODS with only part of the key
Thanks
Ralf

Ralf,
the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
Arun

Target group with customer and contact person

Hi experts,
I want to create a target group with customer data and the names of the main contact person to execute a campaign.
During execution I need the name of the contact person to personalize my forms, the campaign activity should be connected to the customer (and not the contact person).
Is there a functionality to solve my problem? (CRM 7.0)
Thanks in advance.
Werner

Hi Werner,.
I assume you want to select for Organizations (BUT000 Type 2) and you want to see in the Target Group the Contact Persons which are assigned via Relationship to the Orgnizations.
Create for example a Datasource with Infoset CRM_MKTTG_BP_ORG, and under Details for Business Partner use BUT000_PER-PARTNER_GUID.
In Field Function Module maintain CRM_MKTTG_PF_BP_TAB_TO_CP.
Create an Attribute List an assign the Datasource. After Creating the Target Group you will see the Organizations with all the assigned Contact Persons via Relationsship.
Regards
Andreas
Another Tip: Create a Target Group for Persons, assign it to the Campaign, and now set the B2B Flag. Depending from your SP Level you have to apply a note so that the B2B Flag is visible (1263915)
If you set the B2B flag you will get Communication Data for letters, for a Call List from the Relationship.
Regards,
Andreas
Edited by: Andreas Pauli on Apr 29, 2009 10:18 AM

Issue in Target Group creation of contact persons

Hi,
I am working on CRM 5.0. Using the segment builder creating target group to be attached to the campaign.
I have created one target group of organizations with Marketing attributes attached to these BPs.
Using this organizations target group as Master Group I am creating one more target group of contact persons of these organizations (using Contact persons relationship). The issue here is, out of these contact persons I require only those contact persons having interest in classical music. I have maintained this attribute in the BP master data of these contact persons.
While creating the target group of such contacts in segment builder I am using this attribute to filter the data but I am getting all the contacts without any filter applied. My requirement is to only get those contact persons (belonging to the master group of organizations) having interest in classical music. Can anyone suggest how to achieve this?
With regards
Ambar Adhav

Folks,
We have implemented Accounts & Contact Management (BP) in our CRM System. Here the Issue is the Business User Can able to create an Account Successfully from Portal but when he is trying to create Relationship - "Has Contact Person" the following error has got occured -
500 SAP Internal Server Error
Error msg - Inconsistancy between Dictionary Types COMT_BSP_BP_TEL_T AND BAPIADTEL (Type of Termination: RABAX_STATE)
Could you pls help me out and How can i proceed to scan the issue?
Srujan
Edited by: Srujan Kumar on Jan 19, 2008 8:27 AM

How to fetch the contact person of the Vednor in SRM

Hi All,
   I need to display the Contact Person of the vendor which is maintained in XK03(contact person(view)).
     ->How to fetch that name in the SRM ?
    ->Is any FM exists ?
Thanks and Regards
Channappa

Hello Channappa,
Contact person is only significant for Bid Invitations.
For Bid Invitations, you don't have a Vendor but a Bidder with one or several Contacts Persons.
So, when you are in BBP_BID_INV transaction, when you look for bidders to link to your bid invitation, you will find their contacts: this is standard process.
In SAP GUI transaction BP, you will see bidder contacts if customizing done to use BBP_VENDOR_SYNC report to replicate vendors is correctly maintained.
Regards.
Laurent.

Activate Contact Person Functionallity in Vendor master

Hi Colleagues,
We have an issue with Contact Person functionality in Vendor master, specifically with his activation in order to use that funtion menu (Goto -> General Data -> Contact Person). Actually this command is missing in our system.
Customizing nodes about contact person (IMG -> Materials Management -> Purchasing -> Vendor Master -> Contact Persons) specify as mandatory requisite set the system as a Retail SAP System.
We analized the information and executed report GETSYSDEF and the system showed message SYSTEMSWITCH016 "System is set as a manufacturing system"
Our SAP system is a mySAP ERP 5.0 with component SAP_APPL level 0021.
We have several doubts related above explanations:
Is the system able to be customized as a Retail system without loose or damage some actual component (his functionality) as manufacturing system?
Which is the procedure to follow in order to activate Retail SAP System?
Is enough to make settings on IMG node "Activation Switch for SAP R/3 Enterprise Extension Set" flagging on application "EA-RET" or in other hand, there are other additional or different steps to make?
I appreciate any help you can offer me. Thanks in advance.
Regards,
Horacio Miranda

Dear Jurgen,
First thanks for your response.
We don´t want to change manufacturing system for retail system, We try to find the way to add retail system to our actual manufacturing system only for get contact person functionality.
We need to use that functionality on vendors at tx XK01 or tx XK02 / MK02, in order to link all vendor contacts making a validation of each one against a table Z containing prohibited values. If a contact person would exist in that table the system would show an error message.
I hope to be clearly in my explanation. Thanks again for your help.
Regards,
Horacio Miranda

Contact person texts

Hello,
i have a view questions about the contact person texts in CRM:
1. Where in customizing can i add text-types which are only relevant for contact person (not BP general)?
2. How can i define the mapping from contact person text with R/3 (in the best case in both directions)?
Thanks a lot
Best regards
Manfred

Hi Manfred!
Did you find a solution to this problem?
Best regards,
Cristina

Error while creating the Contact Person in the BP Master Data

Dear Experts,
                I encountered the following error while updating the contact person name either while creating new or editing existing customer.
Error - [Contact Persons - Contact Persons name][Line 1],'This entry already exists in the following tables 'Contact Persons' (OCPR) (ODBC - 2035)' [Message 131-183].

Dear Experts,
                  I am not doing a DTW for the same, i am updating the BP Master manually. It has been a recent occurence since 3 days when the customer is trying to update the contact person the following error throws. I tried updating for the existing customers with no contact person, there in also it throwed the same error.
               To bring to your notice i had a test database for the same customer where in i encounter no issues with regard to the contact person update.
Saravanan

Assign one contact person to all vendors

Hi folks
We will be using surrogate bidding , I want to assign one contact person to all Vendors , and currenctly in SRM you can only assign one contact person to one vendor , is there a way of bypassing this or of assigning contact person to multiple vendors ?

Hi Warona,
The application works as below:
1. While you access the application, the bidder should be selected for whom the surrogate bid is placed.
2. Then a bid can be placed, although multiple sur. bids are placed for the same bidder, th system will just ower write the previuosly created one (One Bid Invitation - One Bid or surrogate bid for a bidder)
3. Then if you want to submit a bid for a different bidder and for the same bid invitation, you have to go back to the application again (bacause only then you ca select the next bidder). Then the same cycles 1- 3 goes on.
Hopes this solves your problem.
Regards
Kathirvel

Datasource for Vendor Contact person Address

Hi,
I am looking out for the DS for Vendor Contact person address, which is taken from ADRC table. 0BP_DEF_ADDRESS_ATTR is having Business partner number. it gives all the required data. how to i link it with vendor LFA1 and COntact PErson in KNVK to get the required result.
Thanks & regards
Abi

Hi,
There is no standard data source available for your requirement.
You can enhance 0Vendor_attr master data with LFA1-ADRNR, KNVK-PARNR and address fields in ADRC and populate using user exit code based on the following logic.
Get LFA1-ADRNR where 0VENDOR_ATTR-LIFNR = LFA1-LIFNR
Get KNVK-PARNR where LFA1 - KUNNR = KNVK - KUNNR
Get address fields from ADRC where
LFA1 - ADRNR = ADRC - ADDRNUMBER
ADRC - DATE_FROM = Hard code the values required
ADRC - NATION = Hard code the values required eg. I for international version.
Hope it helps
Regards, Jeya

DEBMAS with only part of contact persons?

Similar Messages

Maybe you are looking for