Debug information missing

I have been developing Flex 3 on the Mac using Textmate. I
use Console to read debug information in flashlog.txt.
It's been working perfectly. However, I just re-installed
Flex 3 Builder and now no debug information is showing up in
flashlog.txt. I ran the "silent installer" in /Applications/Adobe
Flex Builder 3/Player/mac/Flash Player 9 Silent Installer.app as
directed by the main Flex 3 Builder installer.
Any thoughts? I'm dead without the debug info...

<cfqueryparam> is normally used when you want to sanitize user input (URL or Form scope data etc) that is passed to a database query. In this case the string "IN STOCK" is hard-coded, so why not just use:
SELECT * FROM SHOP_FINDINGS
WHERE ROWNUM<=20 AND OPER_NAME = 'IN STOCK'
Does that SELECT statement work? Also, try specifying the column names in the SELECT, rather than using the * wildcard. The parentheses are not needed in your statement either I don't think. This error normally occurs when you specify a missing column name or wildcard, or if a bracket/comma is missing or doesn't match etc. Re-check the query and write a test template to just issue one query to test it perhaps.

Similar Messages

  • Libclntsh.so.10.1 stripped no debugging information

    Hi
    We are using Oracle 10.2.0.1/10.2.0.2 on Itanium server.
    We get the following error message when debugging one of our executables.
    We are unable to display any of our variable values during debugging. I believe this is because of the Oracle error messages that are given below ------
    =============================================
    warning: The shared libraries were not privately mapped;
    setting a
    breakpoint in a shared library will not work until you
    rerun the program;
    stepping over longjmp calls will not work as expected.
    Use the following command to enable debugging of shared
    libraries.
    chatr +dbg enable <executable>
    warning: Load module /u01/app/oracle/product/10.2.0/lib/libclntsh.so.10.1
    has been stripped.
    Debugging information is not available.
    warning: Load module /u01/app/oracle/product/10.2.0/lib/libnnz10.so
    has been stripped.
    Debugging information is not available.
    0xc000000000326c10:0 in __sigtimedwait_sys+0x30 ()
    =============================================

    yes, in fact I have an Oracle Consultant looking into the issue since three days but of no helpl
    I can connect to the source database using sqlplus on this machine and can run a query. But OBI is throwing error.
    Not sure what else is missing. Any suggestions?
    Here is the user.sh
    # Oracle Parameters
    # Make sure that Oracle DB 32 bit Client is installed
    ORACLE_HOME==/obieesbos1/obi/oracle/product/10.2.0/db_1
    export ORACLE_HOME
    TNS_ADMIN=$ORACLE_HOME/network/admin
    export TNS_ADMIN
    PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
    export PATH
    #LD_LIBRARY_PATH=$OracleBI_HOME/server/Bin:$LD_LIBRARY_PATH
    #export LD_LIBRARY_PATH
    #LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
    #export LD_LIBRARY_PATH
    # If you have Linux 64 bit Platform, and would like to run Oracle BI 32 bit
    # then you must install Oracle DB 64 bit client, and this client comes with
    # 32 bit libraries under $ORACLE_HOME/lib32. The LD_LIBRARY_PATH in this case
    # shall be like this:
    LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH

  • How can i disable debug information from the end user

    By changing debug flag in the url to YES it is possible to view debug information. i want to disable debug information, so that end user could not see debug information. can anyone please tell me the solution.

    Sundhar,
    when you export the application select Debugging:No
    It's one of the available properties together with Build Status, Export Comments, Export Supporting Objects Definitions and so on.
    Bye,
    Flavio
    http://www.oraclequirks.com

  • The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

    got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
    Raj

    Hi
     first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

  • Withholding tax information missing from line item

    Hi Gurus,
    We have created a vendor invoice in SAP. The voucher processed and paid has withholding tax of 1,333.00
    But if you display the vendor invoice and click on the withholding tax data button, it says that withholding tax information missing from line item.
    Kindly advise how could this happen when the vendor account has maintains withholding tax code and the payment document also has withholding tax information.
    Thanks,
    Ellicec

    Dear,
    Please check the following:
    1. The withholding tax types and indicators must be defined as Liable'.
    Please check this via vender master data (fk02).
    2.Please check field status group for withholding tax fields in
    transactions OB14 (inserting the field status variant of the Company Code oby6 and the field status group of the g/l account that You can find running FS00) and OB41 (posting key, in DP case 29). Check the account group for the GL account
    assigned to the vendor reconciliation account in FBKP.
    These should be set as "optional".
    Select group --> Taxes
    Suppress Req. Entry Optional Entry
    Withholding Tax Code X
    Withholding Tax Amounts X
    regards

  • How to verify existence/absence of debug information in a jar file

    Given a jar, how can I tell if it contains debug information or not? Is there a tool for this? (e.g, like the 'file' utility on linux, which outputs whether an ELF executable is stripped or not)
    Amit

    I'm not saying it's pretty... but there's a horrible quick & dirty way of checking for debug info
    Typically the debugging information is stored is special attributes in the class files, like "LineNumberTable", "LocalVariableTable" etc.
    Depending on which type of debugging setting was used to compile the source code, these will be present in the binary class file.
    So, you might unjar the contents of the jar and run eg.
    find "LineNumberTable" *.class
    to find all classes with line number information.
    I tried it on a sample class and it worked for me here.
    Hey, I know it's a hack, but not everyone has time to write a full disassembler !
    regards,
    Owen

  • Debug information in putty client

    Can anybody help, do not see debugging information when you connect through a ssh client

    Hi Dmitry,
    I am wondering if you are SSH to a UC500 or IOS device.  Are we talking about something simple as doing a  "terminal monitor" or the 'term mon' command whilst in a telnet or SSH session to see the console debugging results?
    regards Dave

  • Java debug information

    hy,
    I was wondering, is it possible to let an Xlet log java output (debug information) and send it to a server on the set top box. These logging information should give information about all the applications running on the stb.
    This in order to help debug problems on commercial STB without debug output and without the need to implement special functionality in all the applications.
    Can someone point me out some resources? (I am a beginning java developer, so I think this is rather a java issue than an MHP or javaTV issue)
    Thanks

    I've used a couple of development boxes and have found that writing to standard out, via calls to System.out.println() works well. There is probably a serial port on your debug box that you can connect up to a PC to read the the debug output.
    If you want to know what applications can be run on the STB then you'll need to write a bit of code to query the org.dvb.application.AppsDatabase. getAppIDs() will return an enumeration org.dvb.application.AppID objects each of which can be looked up in the database to give you more information about the application in question
    Roger

  • Information about class files debugging information

    Hi,
    As known, when compiling "javac -g ..." the class files contain debugging information.
    my Naive question is WHAT is this information?
    could you please add any links to articles about this debugging information?
    Many thanks!!

    http://java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html#22856
    http://java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html#5956

  • How to determine if class was compiled with debugging information?

    How may I determine if class was compiled with debugging information? Aside from actually executing the class in a debugger.

    As known, when compiling "javac -g ..." the class
    files contain debugging information.
    my Naive question is WHAT is this information?
    could you please add any links to articles about this
    debugging information?http://java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html#22856
    http://java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html#5956

  • How to see debug information without turning on the CF administrator Debugging settings?

    Hi All,
    I want to see the debug information on a web page without Turning ON the debugging settings in CF administrator.
    http://helpx.adobe.com/coldfusion/kb/coldfusion-debug-information-using-mode.html
    In this link, they have given by adding mode=debug in a web page, it will display the debugging information, but it has not showed it up.
    Any help is highly appreciated.
    Thanks!

    The debug info is not even created unless debugging is switched on.
    Adam

  • Remove debug information from UWL

    Hello.
    We need to remove the debug information from UWL (under the list of tasks). This debug information contains the next blocks:
    - logged-on user information
    - current view information
    - current navigation information
    - current item information
    Did anyone face this situation? Is it XML-configuration or properties of UWL iView?
    Thank you.

    Hi there,
    You can disable the UWL support information by doing the following:
    (700 + system (so EP7 or higher)
    1. Log on to the portal
    2. Navigate to the following path: system administration   > system
    configuration
    3. In detailed navigation click on the UWL & Workflow folder
    to expand out
    4. Then click on the Universal Worklist Administration link
    5. Scroll down to the bottom of the page:
    Optional Universal Worklist Service Configuration
      Open the Tray for the Optional UWL Service Configuration
    Click on the button to open the tray for the optional UWL service
    configuration
    6. Scroll down again
    7. Go into edit mode
    8. Display Support Information:   Set the parameter to false
    9. Save
    This will remove the detailed information from your UWL Iview. 
    If your portal is lower version than 700 you can disable the parameter on the iview itself.  Display support information should be set to false if you do not want to see this detailed information.  However, if you need to troubleshoot UWL issues, this information is very very important :).
    I hope that this information is helpful to you!
    Beth Maben
    EP - Senior Support Consultant
    AGS Primary Support, Business Suite & Technology
    Please see the UWL Wiki @
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • "missing or invalid personalization information missing resource library" On CS2

    Problem:
    I just installed CS2 on my Gateway Desktop the other day. I was unable to use CS2 because I maxed out my serial code on another laptop for work. I went a head and deactviated the serial for CS2 and uninstalled it on the laptop. So I could use the CS2 on my Gateway Desktop and transfer the serial code.
    I go to my Desktop and the CS2 still won't load right.  Okay, so I try to uninstall the CS2.  But there's no uninstall file and it's not showing up in the uninstall manager in Windows 7. So go a head and delete the majority of the CS2 in my program files and then try reinstall a fresh copy of CS2.  I get an error "missing or invalid personalization information missing resource library."
    How can I get around that new error? So I can reinstall a working copy of CS2 on my desktop. It's a bit frustrating.  Anybody experience the same problem?   Any insight would be great.  Thanks
    -Brian L
    System using:
    Gateway Desktop DX4822 Windows 7 Home
    Intel 2 quad CPU Q8400 @2.66

    Thanks for the link, I tried following the directions to further removing the components but had no luck.  So I went a head and reformated the computer so I can reinstall a clean CS2.
    Good new is it's not nagging about a inproper serial now.  Bad new is whenever I try to install the CS2 in the C:\Program Files (x86)\adobe It says "The path you selected for installation contains unsupported characters.  Please choose a different folder for installation, so I try C:\Program Files (x86)\adobe2.  I still get that prompt blocking me.
    I did some homework on compatability issues like mention. Some people mention to reclick and and select compatability tab and service pack 3 as admin.  I gave that a go.  All that did was reboot the computer.  A few people claim that got CS2 working for windows 7 already here, other's couldn't:
    http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/6f1b4955-7166-4b8f-ad9b -5d19150f803f
    Any ideas what to do next?

  • Adobe CS2 uninstall (as administrator, no antivirus) fails on Windows with "Missing or Invalid Personalization Information", "Missing resources library"

    My previously fully functional Adobe CS2 install on Windows 7 x64 stopped working when the activation service for CS2 was shut down.
    I tried to follow the re-installation instructions at the following web page which first require a complete uninstall of Adobe CS2:
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    Running as a local administrator in elevated mode and without a running antivirus (in fact, with an uninstalled antivirus), I get the following error message and the uninstaller refuses to run:
    The installer could not start because of the following reasons:
    Missing or Invalid Personalization Information
    Missing resources library
    I searched the forums and found matching threads such as these:
    https://forums.adobe.com/thread/1602420
    https://forums.adobe.com/thread/1547148
    https://forums.adobe.com/thread/986439
    but they seem to suggest insufficient privileges or an interfering antivirus.
    I opened a chat support case (case number: 0214720731) responded to by @Arunkumar who sent me back to the forums.  When I said similar queries had not been resolved for months, he promised to escalate to his "senior product expert" team to post a solution.  I am posting this message in the hope they will respond with useful suggestions as I do not want to do a complete Windows re-install of an otherwise perfectly functional computer just because the Adobe uninstaller doesn't work.

    You have insufficient privileges to access the registry or your virus scanner is blocking it. Nothing Adobe can fix for you, you need to find the culprit on your system and/ or fix the registry permissions as explained here:
    Installation Preparations | Mylenium's Error Code Database
    Mylenium

  • [svn] 4521: Fix for - Override information missing for properties and methods in DITA XML output of ASDoc

    Revision: 4521
    Author: [email protected]
    Date: 2009-01-14 06:01:28 -0800 (Wed, 14 Jan 2009)
    Log Message:
    Fix for - Override information missing for properties and methods in DITA XML output of ASDoc
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-18681
    tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18681
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    Hi ,
    I have an error like this below:
    [java] Exception in thread "main" java.lang.IllegalArgumentException: and
    [java] at com.sun.rave.jsfmeta.generators.Main.run(Main.java:521)
    [java] at com.sun.rave.jsfmeta.generators.Main.main(Main.java:279)
    BUILD FAILED
    if someone know solution plz post it here
    Thanks

Maybe you are looking for

  • Why is my swf exporting as a small blank file?

    I am very new to After Effects.  I created an animated banner with text effects, images and movie files.  It is 1 minute long.  I am trying to export this to an SWF so I can add dynamic links in Flash.  When the file had less layers, it rendered and

  • How to wrap a line in a table cell in adf

    How do I wrap a line of text in a table cell?

  • Can I add a Hyperlink to Launchpad?

    I recently added a hyperlink from Safari to my desktop. Is there a way to move this to Launchpad? I tried dragging it over to Launchpad but it didn't work. I don't want to clutter my desktop which is why I want to put it in Launchpad and I don't want

  • Databank variable value with space- issue in OLT

    Hi, I have noticed that OLT does not recognise databank variables which have a space in them. Is that a known issue. For example I have a script that requires a PostCode to be entered in a field. So in my databank the variable PostCode will have "E10

  • Hi I need this asap... "Java code to generate XML File from XML Schema"

    Hi all.... I need this asap... "Java code to generate XML File from XML Schema i.e XML Schema Definition, XSD file". Thankz in advance... PS: I already posted in the afternoon... this is the second posting.