Debug Issue
Hi,
Task: I am trying to debug BAPI/FM to see when exactly IDOC is getting triggered.
Technic: ALE Distribution model setup
when I Confirm TO its triggering IDOC(IDOC Message Type SHP_IBDLV_CONFIRM_DECENTRAL underlying BAPI is BAPI_INB_DELIVERY_CONFIRM_DEC )
Problem facing : when I do Confirm TO i am keeping break point in BAPI_INB_DELIVERY_CONFIRM_DEC and MASTER_IDOC_DISTRIBUTE both the FM/BAPI but not stopping.
Please help me to debug this.
Thanks
Sarath
Hi Thanks for all the suggissions but nothing worked. Again I am trying to find when exactley IDOC is getting triggered
Just to check I have deleted BAPI SHP_IBDLV_CONFIRM_DECENTRAL (underlying BAPI BAPI_INB_DELIVERY_CONFIRM_DEC) in ALE distribution Model.
Below is the Error message I got, hope you can guide me in correct path for debugging to find out when exactley IDOC is getting triggered.
No recipient could be determined for object BUS2015 method CONFIRMDECENTRAL
Message no. VLBAPI005
Diagnosis
The distribution model for decentralized Warehouse Management System
(decentralized WMS) is not set up correctly with reference to the
recipient determination for object BUS2015 method CONFIRMDECENTRAL. This
means that the system cannot determine a recipient for object BUS2015
method CONFIRMDECENTRAL.
System Response
The system reacts by issuing a warning message, or by terminating
processing in critical situations. If a warning message is issued,
changes are made to the object. If processing is terminated, the object
retains its original status.
Procedure
Inform your system administrator. After the distribution model has been
corrected with regards to recipient determination for object BUS2015
method CONFIRMDECENTRAL, you can save the document and then restart
distribution or repeat the workstep that was canceled.
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method
CONFIRMDECENTRAL using the filter object types WHSE_NO. The system
cannot determine a recipient. Define a filter object type WHSE_NO with a
valid filter value for recipient determination for object BUS2015 method
CONFIRMDECENTRAL.
Similar Messages
-
Debugging issue on establishing connection
Hi,
after reading all the comments on debugging issues using sql developer i am no step further. It seems i have a different problem.
I'm using sql developer 1.5.1 on a windows client.
<ul><li>connection to server is establihed via basic configuration (server, port, sid)</li>
<li>the code is comiled for debug</li>
<li>i do no remote debugging</li>
</ul>
When the debugging is startet i get the following log:
connecting to the database XXX.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( 'xxx.xxx.xxx.xxx', '4283' )
ORA-30683: Fehler beim Herstellen von Verbindung zu Debugger
ORA-12570: TNS: Fehler beim Paket-Leser
ORA-06512: in "SYS.DBMS_DEBUG_JDWP", Zeile 68
ORA-06512: in Zeile 1
Process exited.
Disconnecting from the database XXX.
(its german, sorry)
The point is, there is a debug service listening at the named port. If i start al telnet session at the ip and port i get the response: JDWP-Handshake
It seems the debugging process is not able to reach the db on the server? But why - since the client does?
Any help is welcome!
Thanx,
CmderThe way debugging works is that the database session which is running your code, connects back to the debugger running within sqldeveloper. So for debugging to work, the database server needs to be able to connect to your PC.
Is the IP address in the error message the IP address of you PC? I assume so, since you can telnet to it. If not, try checking the preference "Prompt for debugger host for database debugging" in Tools | Preferences| Debugger.
If you have access to the database server can you connect back to your PC using telnet? -
Hello Friends,
I am a functional consultant and have some issues with sales order.
When I am creating a sales order and enter data like customer, material , quantiy etc and press enter ..... I get a error with the error message ZZ000.
I am trying to debug the sales order to understand how this error is occuring and on what conditions it is occuring.
So before pressing enter ...... I put /h and enter and goes in debugging mode ......
Here I am not able to understand how do I put break point at the error messages.
In menumbar there is a menu for break point followed by statements ... Can some one tell me how to put the breakpoint at the error message so that I can exactly go in the code where this message is set and on what conditions its appearing.
Many thanks
ScreamsHi,
Once you select the Break Points at Satement a Pop up Box will be displayed there write the statement MESSAGE and press Enter or Tick mark in that screen and it will stop at all messages which will be displayed while creating the Sales Order. Try to concentrate on the statement MESSAGE ZZ(000) while debugging the code it will definetly stop there I guess this might be coming from the user exits MV45AFZZ or MV45FZB. Once you find this take the program name displayed in the top of the Debugging Screen (Source Code of) along with the line number in the right side.
And now go to transaction SE38 give this program name and go to line number and have a look at the logic or else ask any ABAPer to look at it why this meaage is being triggered.
Let me know in case of any.
Regards
SRinivas -
Post Processing Error - how to debug issue?
I copied a vanilla report and slightly modified it. the data definition is a vanilla oracle object that is un-changed.
i copied the data to my desktop and the report runs fine (from the Desktop). However the report fails to produce output when run from the application. I get the following in the log file
Beginning post-processing of request 15980025 on node RADON17 at 22-MAY-2008 09:07:49.
Post-processing of request 15980025 failed at 22-MAY-2008 09:07:49 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
The OPP log does not provide any details.
[5/22/08 9:07:49 AM] [24053:RT15980025] Executing post-processing actions for request 15980025.
[5/22/08 9:07:49 AM] [24053:RT15980025] Starting XML Publisher post-processing action.
[5/22/08 9:07:49 AM] [24053:RT15980025]
Template code: XXEAMWOREPORT
Template app: XX
Language: en
Territory: US
Output type: RTF
[5/22/08 9:07:49 AM] [UNEXPECTED] [24053:RT15980025] java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor33.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1659)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:969)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5916)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3452)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3541)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Caused by: java.lang.NullPointerException
at oracle.xdo.parser.v2.PagedNodeList.readPage(PagedNodeList.java:324)
at oracle.xdo.parser.v2.PagedNodeList.start(PagedNodeList.java:312)
at oracle.xdo.parser.v2.XPathFunctionCall.evaluate(XPathFunctionCall.java:540)
at oracle.xdo.parser.v2.PathExpr.evaluate(XSLNodeSetExpr.java:851)
at oracle.xdo.parser.v2.XSLForEach.processAction(XSLForEach.java:113)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLForEachGroup.processLazy(XSLForEachGroup.java:622)
at oracle.xdo.parser.v2.XSLForEachGroup.processAction(XSLForEachGroup.java:97)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLForEach.processAction(XSLForEach.java:147)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLResultElement.processAction(XSLResultElement.java:180)
at oracle.xdo.parser.v2.XSLNode.processChildren(XSLNode.java:417)
at oracle.xdo.parser.v2.XSLTemplate.processAction(XSLTemplate.java:191)
at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:512)
at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
... 17 more
[5/22/08 9:07:49 AM] [24053:RT15980025] Completed post-processing actions for request 15980025.
Any other tools I can use to debug the error??? I'm stuck1. Is it possible to get more debug information from the Crystal Engine to help determine which fields/formulae are causing the issue?
Unfortunately that is it as far as errors.
2. Does anyone have any initial ideas as to why this might be failing?
a) Apply the latest Service pack:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
b) In the CR designer, enable Verify on First Refresh and Verify Stored procedures on First Refresh
c) If the above does not help, as a test create a new win app. All you should need is just the one line of code, no db code. Let the report prompt for the db logon. If the win app works, it's probably a permission issue.
Ludek -
Hello,
I am trying to debug some of my code for a set of WPF buttons. I am stuck with an issue that I cannot get around. When I launch the debugger from Visual Studio 2013, I get the following in the web browser:
An error occurred in the application you were using
You can try the following:
Restart the application.
Click the "More Information" link below for
details about this error.
Less Information
<textarea cols="1" id="errorInfo" readonly="readonly" rows="1" style="width:752px;height:650px;display:block;" wrap="off">Startup URI: \\mrm2inc.com\Users\Michael.Mastro2\Documents\Visual
Studio 2013\Projects\HomeInventoryWebForms\HomeInventoryWebForms\bin\Debug\HomeInventoryWebForms.xbap Application Identity: file://mrm2inc.com/Users/Michael.Mastro2/Documents/Visual%20Studio%202013/Projects/HomeInventoryWebForms/HomeInventoryWebForms/bin/Debug/HomeInventoryWebForms.xbap#HomeInventoryWebForms.xbap,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=fc075058c6cf26e0, processorArchitecture=msil/HomeInventoryWebForms.exe, Version=1.0.0.0, Culture=neutral, PublicKeyToken=fc075058c6cf26e0, processorArchitecture=msil, type=win32 System.Security.Policy.PolicyException:
Execution permission cannot be acquired. at System.Runtime.Hosting.ApplicationActivator.CreateInstanceHelper(AppDomainSetup adSetup) at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData)
at System.Windows.Interop.PresentationApplicationActivator.CreateInstance(ActivationContext actCtx) at System.Activator.CreateInstance(ActivationContext activationContext) at System.Windows.Interop.ApplicationLauncherXappDebug.Initialize() at System.Windows.Interop.DocObjHost.MS.Internal.AppModel.IBrowserHostServices.Run(String
path, String fragment, MimeType mime, String debugSecurityZoneURL, String applicationId, Object streamContainer, Object ucomLoadIStream, HostingFlags hostingFlags, INativeProgressPage nativeProgressPage, String progressAssemblyName, String progressClassName,
String errorAssemblyName, String errorClassName, IHostBrowser hostBrowser) ----------------------- PresentationHost.exe v4.0.41210.0 built by: Main - C:\Windows\SysWOW64\PresentationHost.exe ntdll.dll v6.3.9600.17031 (winblue_gdr.140221-1952) - C:\Windows\SYSTEM32\ntdll.dll
KERNEL32.DLL v6.3.9600.17031 (winblue_gdr.140221-1952) - C:\Windows\SYSTEM32\KERNEL32.DLL KERNELBASE.dll v6.3.9600.17031 (winblue_gdr.140221-1952) - C:\Windows\SYSTEM32\KERNELBASE.dll ADVAPI32.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\ADVAPI32.dll
USER32.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\USER32.dll msvcrt.dll v7.0.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\msvcrt.dll ole32.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\ole32.dll OLEAUT32.dll
v6.3.9600.17415 - C:\Windows\SYSTEM32\OLEAUT32.dll mscoree.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\mscoree.dll SHLWAPI.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\SHLWAPI.dll WININET.dll v11.00.9600.16384
(winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\WININET.dll urlmon.dll v11.00.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\urlmon.dll SHELL32.dll v6.3.9600.17031 (winblue_gdr.140221-1952) - C:\Windows\SYSTEM32\SHELL32.dll sechost.dll v6.3.9600.16384
(winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\sechost.dll RPCRT4.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\RPCRT4.dll GDI32.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\GDI32.dll combase.dll v6.3.9600.16384
(winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\combase.dll iertutil.dll v11.00.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\iertutil.dll USERENV.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\USERENV.dll SspiCli.dll v6.3.9600.17415
(winblue_r4.141028-1500) - C:\Windows\SYSTEM32\SspiCli.dll profapi.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\profapi.dll CRYPTBASE.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\CRYPTBASE.dll bcryptPrimitives.dll
v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\bcryptPrimitives.dll IMM32.DLL v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\system32\IMM32.DLL MSCTF.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\MSCTF.dll shcore.dll
v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\shcore.dll PresentationHost_v0400.dll v4.0.30319.33440 built by: FX45W81RTMREL - C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\PresentationHost_v0400.dll MSVCR120_CLR0400.dll v12.00.51670.34230
built by: FX452RTMGDR - C:\Windows\SYSTEM32\MSVCR120_CLR0400.dll VERSION.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\VERSION.dll PSAPI.DLL v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\PSAPI.DLL kernel.appcore.dll v6.3.9600.17415
(winblue_r4.141028-1500) - C:\Windows\SYSTEM32\kernel.appcore.dll uxtheme.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\system32\uxtheme.dll ltc_help32-91954.dll v1, 0, 0, 1 - C:\PROGRA~2\Raptr\ltc_help32-91954.dll WINTRUST.dll v6.3.9600.17415
(winblue_r4.141028-1500) - C:\Windows\SYSTEM32\WINTRUST.dll CRYPT32.dll v6.3.9600.16431 (winblue_gdr.131015-2301) - C:\Windows\SYSTEM32\CRYPT32.dll MSASN1.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\MSASN1.dll clbcatq.dll v2001.12.10530.17415
(winblue_r4.141028-1500) - C:\Windows\SYSTEM32\clbcatq.dll CRYPTSP.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\CRYPTSP.dll rsaenh.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\system32\rsaenh.dll bcrypt.dll v6.3.9600.16384
(winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\bcrypt.dll ieproxy.dll v11.00.9600.17496 (winblue_r5.141121-1500) - C:\Program Files (x86)\Internet Explorer\ieproxy.dll PROPSYS.dll v7.00.9600.17031 (winblue_gdr.140221-1952) - C:\Windows\SYSTEM32\PROPSYS.dll
dfshim.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\dfshim.dll mscoreei.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll clr.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Secur32.dll v6.3.9600.17415 (winblue_r4.141028-1500) - C:\Windows\SYSTEM32\Secur32.dll dwmapi.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\system32\dwmapi.dll msxml3.dll v8.110.9600.17415 - C:\Windows\System32\msxml3.dll actxprxy.dll v6.3.9600.17416
(winblue_r4.141030-1500) - C:\Windows\SYSTEM32\actxprxy.dll sxs.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\sxs.dll PresentationHostProxy.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\PresentationHostProxy.dll
comctl32.dll v6.10 (winblue_rtm.130821-1623) - C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9600.17415_none_a9ed7f470139b3c1\comctl32.dll mscorlib.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\mscorlib\d03a3ddcd6a395878751c5e90fa16915\mscorlib.ni.dll
System.ni.dll v4.0.30319.34239 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System\1a6b5095c4416a37f9ca4cf4436d1311\System.ni.dll WindowsBase.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\WindowsBase\bb26d987467eca70ebc4beec29158d67\WindowsBase.ni.dll
PresentationCore.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\PresentationCore\24f6c80242420a1cea5cc254bf420027\PresentationCore.ni.dll PresentationFramework.ni.dll v4.0.30319.34209 - C:\Windows\assembly\NativeImages_v4.0.30319_32\Presentatio5ae0f00f#\4136b9a7a05c8f0e2c7e15600bc20b1b\PresentationFramework.ni.dll
dwrite.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\dwrite.dll wpfgfx_v0400.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\wpfgfx_v0400.dll PresentationNative_v0400.dll v4.0.30319.33440
built by: FX45W81RTMREL - C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\PresentationNative_v0400.dll System.Xaml.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Xaml\d626184834dde3f4906aff139d4e5bbf\System.Xaml.ni.dll
clrjit.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\Microsoft.NET\Framework\v4.0.30319\clrjit.dll System.Xml.ni.dll v4.0.30319.34230 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Xml\9a349fb029581f4752d2c6cfcfeab816\System.Xml.ni.dll
System.Drawing.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Drawing\d91798a9a9fcb450351fe8e49026a69f\System.Drawing.ni.dll System.Windows.Forms.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Windows.Forms\a4d2243df4af8ab65ff74d436d449789\System.Windows.Forms.ni.dll
System.Security.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Security\d72f65a6622be86134ba8c534acc10e5\System.Security.ni.dll System.Core.ni.dll v4.0.30319.34209 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Core\794a3d83e77a53d6fc029c389f9cc408\System.Core.ni.dll
System.Deployment.ni.dll v4.0.30319.34243 built by: FX452RTMGDR - C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Deployment\84fa9fa9c4be29612f8d268246a0353c\System.Deployment.ni.dll System.Configuration.ni.dll v4.0.30319.34209 built by: FX452RTMGDR
- C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Configuration\b5b80f1284dfa1b883da48ed58ecbc47\System.Configuration.ni.dll gpapi.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\gpapi.dll ncrypt.dll v6.3.9600.16384 (winblue_rtm.130821-1623)
- C:\Windows\SYSTEM32\ncrypt.dll NTASN1.dll v6.3.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\SYSTEM32\NTASN1.dll diasymreader.dll v12.0.20806.33440 built by: FX45W81RTMREL - C:\Windows\Microsoft.NET\Framework\v4.0.30319\diasymreader.dll uiautomationcore.dll
v7.2.9600.16384 (winblue_rtm.130821-1623) - C:\Windows\System32\uiautomationcore.dll </textarea>
Anyone have any ideas how to get around this issue, or fix the issue?
Michael R. Mastro IIYou need to be able to debug your code.
This is a key ability.
So key that this is the first thing you should be thinking about with any development ( which isn't trivial. ).
Work out how to debug your application.
Stick break points in there and explore what is going on.
https://nirajrules.wordpress.com/2008/06/11/debugging-an-xbap-wcf-application-%E2%80%93-windows-vista-vsnet-2008/
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML -
5.1.3 Java Collaboration Debug issues...
Hi All,
JCAPS Newbie here.
I've setup debugging for Java Collaboration's deployed on a logical host.
It seems to work as I can step through the code, except it's just not behaving as I expected with regards to hitting breakpoints & stepping over some methods.
In a nutshell ...
1) It doesn't stop on the breakpoints I set.
2) It always stops in method log( LOG_LEVEL_DEBUG, "xxx" ); when I click "GO" or StepOver???
Has anyone else seen this behaviour?
Any ideas about how to get it working correctly???
Thanks,
KenFYI...
This is a known issue with eDesigner,
I have E-mailed you a Hotfix to apply to your environment which is doing the debugging.
I have also included a ReadMe which explains how to install the ESR
Sun Java CAPS Support. -
Remote debugging issue: Address already in use
First, I want to explain that to use remote debugging in oracle UCM server (IdcServerNT.exe), I add these lines at */server/bin/intradoc.cfg*:
JAVA_OPTIONS_debug_enable=-Xdebug
JAVA_OPTIONS_debug_options=-Xrunjdwp:transport=dt_socket,server=y,address=8000,suspend=n
and since the JAVA_OPTIONS is shared between admin server (IdcAdminNT.exe) and non-admin server (IdcServerNT.exe), to prevent "Address already in use" error, I added same lines but with empty value into */server/admin/bin/intradoc.cfg*:
JAVA_OPTIONS_debug_enable=
JAVA_OPTIONS_debug_options=
or alternatively enable it but use different port for the "address=xxx".
Now the issue is when I had run the non-admin UCM server with remote debugging enabled, then I tried to run the Component Wizard, I got "Address already in use" error:
ERROR: transport error 202: bind failed: Address already in use ["transport.c",L41]
I found out that's possible because Component Wizard (ComponentWizard.exe) is using same setting file with non-admin server (IdcServerNT.exe): */server/bin/intradoc.cfg*. It's obvious that happened because of ComponentWizard.exe is in same location with IdcServerNT.exe, so I think other tools like Batch Loader and System Properties will be affected with same issue too.
Because of this issue, everytime I want to open Component Wizard, I had to stop the non-admin server which is inconvenient.
So, the question is there a way to define separately or disable the JAVA_OPTIONS_debug_enable & JAVA_OPTIONS_debug_options for Component Wizard?WillT wrote:
My run method was being called somewhere else and I can't find out whereOkay, but changing from implementing Runnable to extending Thread won't change that one whit. You must've also changed something else.
Extending Thread is the wrong approach, since you're not creating a special kind of Thread. -
IOS/AIR Running and Debugging Issues with Flash Builder
I'm having very frustrating intermittent issues running and debugging Flex applications on an iPad 3rd generation retina with Flash Builder 4.7.
Until this morning, launching on device using both standard and fast packaging worked pretty well. Every now and again, I'd get a dialog saying the packaging had completed successfully, but it hadn't. A quick change of the USB cable to another port on my iMac and it started working again. I'd also randomly get a "Error occurred while installing the application: Invalid <device> specified" error, which quickly went away.
This morning, with the same code base, the same certificate and provisioning profiles, Flash Builder has only managed to successfully package and run my application on my iPad twice and I must have attempted to launch fifty or so times. Standard packaging, fast packaging and with and without the useLegacyAOT.
Does this sound like a Flash Builder issue? Is my iMac USB driver dodgy? Has anybody else experienced this?
Any help greatly welcomed!
Thanks,
SimonHi I have had this problem sometimes. With my Mac Book Pro.
Try making a new flex application and see if you have the same result.
When I had this problem I created a new Application and copied every thing from my other application.
This my be a hard solution but I don't no any others. -
Hi Gurus,
I gotta problem here with Jdev(Java 1.4, Struts, OC4J), I'm trying to debug a java 'trans' class, and when the process enters to the class, the console dont show the println and doesnt concat the strings and also, dont execute the vo query well, I have program many other classes and they run and debug without any problem or issue, what can be the issue here ?
heres my action method:
public class RepVisitasAction extends DispatchAction {
public RepVisitasAction() {
public ActionForward generarReporte (ActionMapping mapping, ActionForm form,
HttpServletRequest request,
HttpServletResponse response) throws IOException,
ServletException {
AccessControlMgr ac = new AccessControlMgr();
if (ac.isValidSession(request) == false) {
return mapping.findForward("accessControl");
RepVisitasForm repForm = null;
String fwd="reporteVisitas";
repForm = (RepVisitasForm)form;
String zona = repForm.getZonaSelected();
String crs = getTiendasPorZona(zona);
XxtaReporteVisitasTransactionsAlter trans = null;
DateFormat format;
Date ini;
Date fin;
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
try{
trans = new XxtaReporteVisitasTransactionsAlter();
format = new SimpleDateFormat("yyyy-MM-dd");
ini = (Date)format.parse(repForm.getFechaInicialSelected());
fin = (Date)format.parse(repForm.getFechaFinalSelected());
String periodo = "'" + sdf.format(ini) + "' AND '" + sdf.format(fin) + "'";
request.getSession().setAttribute("periodo", periodo);
ArrayList nivel1 = new ArrayList();
nivel1 = trans.getReporte1(crs,periodo);
repForm.setNivel1(nivel1);
repForm.setLevel("2");
catch(Exception ex){
ex.printStackTrace();
finally{
trans.releaseConnection();
return mapping.findForward(fwd);
private String getTiendasPorZona(String zona){
XxtaReporteVisitasTransactionsAlter trans = null;
String crs = null;
try{
trans = new XxtaReporteVisitasTransactionsAlter();
crs = trans.getTiendasPorZona(zona);
}catch(Exception ex){
ex.printStackTrace();
}finally{
trans.releaseConnection();
return crs;
heres my trans code:
public class XxtaReporteVisitasTransactionsAlter extends XxtaBaseTransactions {
private static final String queryZonas1 = "select * from (SELECT p.zona, (SELECT COUNT(pv.cr_tienda) FROM cnt_tiendas_x_plaza_v pv INNER JOIN xxta_zonas zo ON (zo.nombre_zona = pv.zona) WHERE pv.zona = p.zona) AS total_tiendas, COUNT(DISTINCT v.cr_tienda) AS tiendas_encuestadas, round((COUNT(DISTINCT v.cr_tienda) * 100 / GREATEST((SELECT COUNT(pv.cr_tienda) FROM cnt_tiendas_x_plaza_v pv INNER JOIN xxta_zonas zo ON (zo.nombre_zona = pv.zona) WHERE pv.zona = p.zona), 1)),2) AS porcentaje_tiendas_encues, COUNT(DISTINCT a.enc_id) AS encuestas_realizadas FROM xxta_control_visitas v INNER JOIN xxta_control_enc_answers a ON (v.doc_id = a.doc_id) RIGHT JOIN cnt_tiendas_x_plaza_v tp ON (v.cr_tienda = tp.cr_tienda) INNER JOIN cnt_distritos_x_plaza_v p ON (p.plaza = v.cr_plaza) ";
private static final String queryZonas2 = " GROUP BY p.zona )";
private static final String queryPlazas1 = "SELECT tp.plaza, (SELECT COUNT(p.cr_tienda) FROM cnt_tiendas_x_plaza_v p) AS total_tiendas, COUNT(DISTINCT v.cr_tienda) AS tiendas_encuestadas, round((COUNT(DISTINCT v.cr_tienda) * 100 / GREATEST((SELECT COUNT(p.cr_tienda) FROM cnt_tiendas_x_plaza_v p),1)),2) AS porcentaje_tiendas_encues, COUNT(DISTINCT a.enc_id) AS encuestas_realizadas FROM xxta_control_visitas v INNER JOIN xxta_control_enc_answers a ON (v.doc_id = a.doc_id) RIGHT JOIN cnt_tiendas_x_plaza_v tp ON (v.cr_tienda = tp.cr_tienda) ";
private static final String queryPlazas2 = " GROUP BY tp.plaza";
private static final String queryDtos1 = "SELECT p.distrito, p.id_distrito, (SELECT COUNT(pv.cr_tienda) FROM cnt_tiendas_x_plaza_v pv WHERE pv.distrito = p.distrito) AS total_tiendas, COUNT(DISTINCT v.cr_tienda) AS tiendas_encuestadas, round((COUNT(DISTINCT v.cr_tienda) * 100 / GREATEST((SELECT COUNT(pv.cr_tienda) FROM cnt_tiendas_x_plaza_v pv WHERE pv.distrito = p.distrito), 1)),2) AS porcentaje_tiendas_encues, COUNT(DISTINCT a.enc_id) AS encuestas_realizadas FROM xxta_control_visitas v INNER JOIN xxta_control_enc_answers a ON (v.doc_id = a.doc_id) RIGHT JOIN cnt_tiendas_x_plaza_v tp ON (v.cr_tienda = tp.cr_tienda) INNER JOIN cnt_distritos_x_plaza_v p ON (p.plaza = v.cr_plaza) ";
private static final String queryDtos2 = " GROUP BY p.distrito, p.id_distrito";
public XxtaReporteVisitasTransactionsAlter() {
public String getTiendasPorZona(String zona){
XxtaTiendaPorZonaViewImpl vo = null;
String cadena = "";
try{
vo = (XxtaTiendaPorZonaViewImpl)XxtaModule.findViewObject("XxtaTiendaPorZonaView");
vo.clearCache();
vo.setRangeSize(-1);
if(!zona.equalsIgnoreCase("todos")){
vo.setWhereClause("zona = '" + zona + "' ");
vo.executeQuery();
Row[] row = vo.getAllRowsInRange();
for(int i = 0; i < row.length; i++){
XxtaTiendaPorZonaViewRowImpl vor = (XxtaTiendaPorZonaViewRowImpl)row;
if(!cadena.equalsIgnoreCase("")){
cadena += ",'" + vor.getCrTienda() + "'";
}else{
cadena += "'" + vor.getCrTienda() + "'";
}catch(Exception ex){
ex.printStackTrace();
}finally{
if(vo != null){
vo.closeRowSet();
return cadena;
public ArrayList getReporte1(String crs, String periodo){
XxtaRepVisitasZonaViewImpl vo = null;
ArrayList list = null;
StringBuffer query = new StringBuffer();
int totalTiendas = 0;
int tiendasEnc = 0;
int por1 = 0;
int tiendasSin = 0;
int totalInv = 0;
int totalEnc = 0;
int encInv = 0;
try{
if(!crs.equalsIgnoreCase("")){
query.append(queryZonas1).append(" WHERE v.cr_tienda IN (").append(crs).append(") AND a.tienda_end_date BETWEEN ").append(periodo).append(queryZonas2);
//query = queryZonas1 + " WHERE v.cr_tienda IN (" + crs + ") AND a.tienda_end_date BETWEEN " + periodo + queryZonas2;
}else{
query.append(queryZonas1).append(" WHERE a.tienda_end_date BETWEEN ").append(periodo).append(queryZonas2);
//query = queryZonas1 + " WHERE a.tienda_end_date BETWEEN " + periodo + queryZonas2;
vo = (XxtaRepVisitasZonaViewImpl)XxtaModule.findViewObject("XxtaRepVisitasZonaView");
vo.clearCache();
vo.setRangeSize(-1);
//System.out.println("Query: " + query.toString());
vo.setQuery(query.toString());
System.out.println(vo.getQuery());
vo.executeQuery();
Row[] row = vo.getAllRowsInRange();
list = new ArrayList();
for(int i = 0; i < row.length; i++){
XxtaRepVisitasZonaViewRowImpl vor = (XxtaRepVisitasZonaViewRowImpl)row[i];
ReporteVisitasBean bean = new ReporteVisitasBean();
bean.setZona(vor.getZona());
bean.setTotalTiendas(vor.getTotalTiendas().toString());
bean.setTiendasEncuestadas(vor.getTiendasEncuestadas().toString());
int ti = Integer.parseInt(vor.getTotalTiendas().toString()) - Integer.parseInt(vor.getTiendasEncuestadas().toString());
int por = (Integer.parseInt(vor.getTiendasEncuestadas().toString()) / Integer.parseInt(vor.getTotalTiendas().toString())) * 100;
bean.setPorcentajeTiendas("%" + String.valueOf(por));
bean.setTiendasSinEncuestas(String.valueOf(ti));
bean.setPorcentajeTiendasSin("%" + String.valueOf(100-por));
String invRea = getInventariosRealizados("(" + crs + ")");
bean.setInventariosRealizados(invRea);
bean.setEncuestasRealizadas(vor.getEncuestasRealizadas().toString());
int per = (Integer.parseInt(vor.getEncuestasRealizadas().toString())/Integer.parseInt(invRea));
bean.setEncuestasPorInventarios("%" + String.valueOf(per));
list.add(bean);
totalTiendas += Integer.parseInt(vor.getTotalTiendas().toString());
tiendasEnc += Integer.parseInt(vor.getTiendasEncuestadas().toString());
por1 += por;
tiendasSin += ti;
totalInv += Integer.parseInt(invRea);
totalEnc += Integer.parseInt(vor.getEncuestasRealizadas().toString());
encInv += per;
if(list.size() > 0){
ReporteVisitasBean bean = new ReporteVisitasBean();
bean.setZona("TOTAL TIENDAS");
bean.setTotalTiendas(String.valueOf(totalTiendas));
bean.setTiendasEncuestadas(String.valueOf(tiendasEnc));
bean.setPorcentajeTiendas(String.valueOf(por1/list.size()));
bean.setTiendasSinEncuestas(String.valueOf(tiendasSin));
bean.setPorcentajeTiendasSin(String.valueOf(String.valueOf(100 - Integer.parseInt(bean.getPorcentajeTiendas()))));
bean.setEncuestasRealizadas(String.valueOf(totalEnc));
bean.setInventariosRealizados(String.valueOf(totalInv));
bean.setEncuestasPorInventarios(String.valueOf(String.valueOf(encInv/list.size())));
list.add(bean);
}catch(Exception ex){
ex.printStackTrace();
System.out.println(ex.getMessage());
}finally{
if(vo != null){
vo.closeRowSet();
return list;
I hope you can help with these problems, I checked the code and doesn't look wrong, I think it might be some malfunction of the IDE (Jdev)
Best Regards,
MentorHalim,
Instead of deleting some cash, you could just give it to me ;)
Sorry, couldn't resist...
When you say "tons of modules," what do you mean? Are you talking about design-time or run-time performance? Does stopping the embedded OC4J help?
John -
Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
Running under WinXP
Issue description:
Is there a mean to debug a package and avoid program hang + object locking and waiting until timeout or eventually restart the db ?eventually restart the db Before that, I'd kill sqldev's session...
K. -
Hi,
I am using jmscapi for reading data from a JMS Queue.
If I run the binary in dbx mode it stops in the JMSCreateContext() function call and displays this
t@1 (l@1) signal SEGV (no mapping at the fault address) in (unknown) at 0xfa87fae0
0xfa87fae0: bad opcode
But if I run the same binary without dbx it works fine and it reads data from the JMS Queue successfully.
Following is the stack trace with dbx mode:
[SunOS]dbx ReadRequestQueue
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.1' in your .dbxrc
Reading ReadRequestQueue
Reading ld.so.1
Reading libxerces-c.so.27
Reading libjmsc.so
Reading libjvm.so
Reading librt.so.1
Reading libCstd.so.1
Reading libCrun.so.1
Reading libm.so.1
Reading libw.so.1
Reading libc.so.1
Reading libpthread.so.1
Reading libnsl.so.1
Reading libsocket.so.1
Reading libdl.so.1
Reading libthread.so.1
Reading libaio.so.1
Reading libmd5.so.1
Reading libmp.so.2
Reading libCstd_isa.so.1
Reading libc_psr.so.1
detected a multithreaded program
(dbx) run
Running: ReadRequestQueue
(process id 27371)
Reading libhpi.so
Reading libverify.so
Reading libjava.so
Reading libzip.so
t@1 (l@1) signal SEGV (no mapping at the fault address) in (unknown) at 0xfa87fae0
0xfa87fae0: bad opcode
Current function is main
68 != JMS_NO_ERROR) {
(dbx) where
current thread: t@1
[1] 0xfa87fae0(0xf25c6718, 0x1, 0xd, 0x34, 0xf65dcf70, 0xffbfcb50), at 0xfa87fadf
[2] 0xfa805c64(0xf25c6568, 0xb7, 0xffbfccd8, 0xfa815238, 0xfa8150c4, 0xffbfcbf0), at 0xfa805c63
[3] 0xfa805c64(0xf25c6568, 0xb6, 0xffbfcd60, 0xfa8151f0, 0xfa8150c4, 0xffbfcc70), at 0xfa805c63
[4] 0xfa805b10(0xf25c6568, 0xb6, 0xffbfcde8, 0xfa815030, 0xfa8150c4, 0xffbfcd00), at 0xfa805b0f
[5] 0xfa805b10(0xf25c6568, 0xb6, 0x8, 0xfa815030, 0xfa815284, 0xffbfcd80), at 0xfa805b0f
[6] 0xfa805b10(0xf25c5540, 0xb7, 0x11, 0xfa815080, 0xfa815284, 0xffbfce18), at 0xfa805b0f
[7] 0xfa805c64(0xf25c5540, 0xb7, 0xffbfcf74, 0xfa8151f0, 0xfa815284, 0xffbfce98), at 0xfa805c63
[8] 0xfa805c64(0xf25c5540, 0xb7, 0xffbfcff8, 0xfa8151f0, 0xfa815284, 0xffbfcf18), at 0xfa805c63
[9] 0xfa805c64(0xf25c5540, 0xb7, 0x3b, 0xfa815350, 0xf65c6180, 0xffbfcf98), at 0xfa805c63
[10] 0xfa805c64(0x5a180, 0xb8, 0xffbfd118, 0xfa815240, 0xfa815284, 0xffbfd028), at 0xfa805c63
[11] 0xfa805c64(0xf25c52a8, 0xb7, 0xffbfd198, 0xfa8153a0, 0xfa8150c4, 0xffbfd0b8), at 0xfa805c63
[12] 0xfa805b54(0xf25c52a8, 0xb6, 0x23, 0xfa815238, 0xf65bb7a0, 0xffbfd138), at 0xfa805b53
[13] 0xfa805b54(0xf25c4dd8, 0xb7, 0x8, 0xfa815080, 0xf65bb7a0, 0xffbfd1b8), at 0xfa805b53
[14] 0xfa805c64(0xf25c4dd8, 0xb7, 0x34, 0xfa8151f0, 0xf65865c8, 0xffbfd240), at 0xfa805c63
[15] 0xfa805c64(0xf25b2018, 0xb6, 0x8, 0xfa815240, 0xf65865c8, 0xffbfd2f0), at 0xfa805c63
[16] 0xfa805c64(0xf25b2018, 0xb7, 0x78, 0xfa8154b0, 0xf6569f80, 0xffbfd380), at 0xfa805c63
[17] 0xfa805c64(0x5a180, 0xb8, 0x8, 0xfa8151f0, 0xfa8153e4, 0xffbfd420), at 0xfa805c63
[18] 0xfa805c64(0x5a180, 0xb8, 0x15, 0xfa815398, 0xf6569f80, 0xffbfd4c0), at 0xfa805c63
[19] 0xfa805c64(0x5a180, 0xb8, 0x44, 0xfa815350, 0xf6562fd0, 0xffbfd558), at 0xfa805c63
[20] 0xfa805c64(0x5a180, 0x0, 0x0, 0xfa8153a0, 0x361240, 0xffbfd5d8), at 0xfa805c63
[21] 0xfa800118(0xffbfd6c4, 0xffbfd788, 0xa, 0xf6564b18, 0xfa80aae0, 0xffbfd794), at 0xfa800117
[22] JavaCalls::call_helper(0xffbfd780, 0xffbfd77c, 0xffbfd790, 0x5a180, 0x5a180, 0x5c00), at 0xfe4d4b98
[23] instanceKlass::call_class_initializer_impl(0xffbfd854, 0x5a180, 0xffbfd9ac, 0x5a180, 0x1, 0x0), at 0xfe4d4878
[24] instanceKlass::call_class_initializer(0xf6564bc0, 0x5a180, 0x5a180, 0x5a180, 0xfe4dc7d4, 0xc), at 0xfe4d475c
[25] instanceKlass::initialize_impl(0xffbfda10, 0x5a180, 0xffbfdc14, 0x10e5d8, 0x5a180, 0x1), at 0xfe4d42ac
[26] instanceKlass::initialize(0xf6564bc0, 0x5a180, 0x5a180, 0xffbfd928, 0x2a, 0x13c), at 0xfe4d3d48
[27] InterpreterRuntime::_new(0x5a180, 0xf6538b68, 0xb1, 0x2c4, 0xf6538b68, 0xffbfdab0), at 0xfe4dcd8c
[28] 0xfa815854(0x5a180, 0x0, 0x0, 0xfa8104b0, 0x361240, 0xffbfdb48), at 0xfa815853
[29] 0xfa800118(0xffbfdc34, 0xffbfdcf8, 0xa, 0xf653cab0, 0xfa80aae0, 0xffbfdd04), at 0xfa800117
[30] JavaCalls::call_helper(0xffbfdcf0, 0xffbfdcec, 0xffbfdd00, 0x5a180, 0x5a180, 0x5c00), at 0xfe4d4b98
[31] instanceKlass::call_class_initializer_impl(0xffbfddc4, 0x5a180, 0xffbfdf1c, 0x5a180, 0x59de0, 0x0), at 0xfe4d4878
[32] instanceKlass::call_class_initializer(0xf653cc00, 0x5a180, 0x5a180, 0x5a180, 0x1, 0x0), at 0xfe4d475c
[33] instanceKlass::initialize_impl(0xffbfdf80, 0x5a180, 0xffbfe604, 0x5a79c, 0x59870, 0x0), at 0xfe4d42ac
[34] instanceKlass::initialize(0xf653cc00, 0x5a180, 0xffbfe00c, 0x0, 0x5a180, 0x0), at 0xfe4d3d48
[35] find_class_from_class_loader(0x5a20c, 0xffbfe088, 0x1, 0xffbfe084, 0xffbfe078, 0x0), at 0xfe4e8b6c
[36] JVM_FindClassFromClassLoader(0xfe828000, 0xffbfe100, 0x1, 0xffbfe25c, 0x0, 0x0), at 0xfe4f2780
[37] Java_java_lang_Class_forName0(0x5a20c, 0xffbfe1e8, 0xffbfe264, 0x1, 0xffbfe25c, 0x0), at 0xfe87c1f8
[38] 0xfa80bbc8(0xf26141e8, 0xb8, 0xffbfe2e4, 0xfa815030, 0xfa8153e4, 0xffbfe200), at 0xfa80bbc7
[39] 0xfa805b10(0x5a180, 0xb8, 0x8, 0xfa815398, 0xf64089b8, 0xffbfe280), at 0xfa805b0f
[40] 0xfa805b10(0xf2431840, 0xf6531a10, 0x8, 0xfa8153a0, 0xf6531a10, 0xffbfe310), at 0xfa805b0f
[41] 0xfa805fd8(0x5a180, 0xb8, 0xffbfe494, 0xfa8154b0, 0xfa8150c4, 0xffbfe3b0), at 0xfa805fd7
[42] 0xfa805b10(0xf26101a8, 0xb6, 0x8, 0xfa8153a0, 0xfa8150c4, 0xffbfe430), at 0xfa805b0f
[43] 0xfa805b10(0xf24f9bf8, 0xb6, 0xffbfe590, 0xfa815030, 0xf6427128, 0xffbfe4b0), at 0xfa805b0f
[44] 0xfa805c64(0xffbfe598, 0x0, 0x0, 0xfa815030, 0x361240, 0xffbfe530), at 0xfa805c63
[45] 0xfa800118(0xffbfe624, 0xffbfe848, 0xa, 0xf6522130, 0xfa80aae0, 0xffbfe74c), at 0xfa800117
[46] JavaCalls::call_helper(0xffbfe840, 0xffbfe6d8, 0xffbfe740, 0x5a180, 0x5a180, 0x5c00), at 0xfe4d4b98
[47] jni_invoke_nonstatic(0x0, 0xfe83fdf8, 0x4000, 0x4380, 0x5a730, 0xffbfe824), at 0xfe4eb508
[48] jni_NewObject(0x5a20c, 0x5abf4, 0xe5330, 0x5abf0, 0xff394e30, 0x20380d), at 0xfe5bd65c
[49] JmsContextCreate(0xffbfeda4, 0x0, 0x0, 0x0, 0xffbfeda0, 0x0), at 0xff36e82c
=>[50] main(argc = -228825368, argv = 0xf25c66e8), line 68 in "ReadRequestQueue.c"
(dbx)
Is there any way to skip over the JMSC function calls?
Or can I get the source code of jmscapi so that I build it with -g option.
Thank you in advance for your help.
-Puja.Hi Chirag,
In Background Job cases, I think BADI's can not be debugged directly by putting a break point. There is another way round using SM50. Please follow the below link. It may help you.
https://scn.sap.com/thread/1307038 -
Set tcp ip debug issue! doesn't log!
Hi,
I have tried to debug tcp ip traffic but the usual logging doesn't
work.
I set the debugger to 1
use the net
set it to 0
unload conlog
view the conlog file
but it doesn't show any traffic at all.
Only logs the commands executed on system screen.
currently NW 6.0 sp3 on both servers (BM + fileserver)
Tried to find something on it on Craigs site but there was a
mentioning
from last year that it had a bug that should be fixed with sp1
Help apriciated,
Dom
Dominicus B
architect
Finland
www.abrakadabra.fi
Sent using Virtual Access 5.51 - download your freeware copy now
http://www.atlantic-coast.com/downloads/vasetup.exeIn article <[email protected]>, DomincusB wrote:
> Save the screen to a file?
>
Yes, press F1 on the logger screen and see the help content. F2
should
save to a file. With the latest patches for NetWare, you can specify
the file location and name as well.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com *** -
Debug issue with maven eclipse
Hi,
I am trying to debug my web application with eclipse.I am using maven as a build tool.
I found this error:
set INT_MAVEN_OPTS=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=y -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
Preparing to Execute Maven in Debug Mode
ERROR: JDWP unable to get necessary JVMTI capabilities. ["debugInit.c",L279]I am using:
jdk1.5.0_15
eclipse 3.3.0
apache-maven-2.0.9
Can anyone please tell me where is the problem?
Thanks,Hello,
Have you tried to generate Web Services using OracleAS using the Java command or Ant task to create services or clients?
You can then compile and package the application.
Take a look to the Oracle Web Service Assembler tools
Regards
Tugdual Grall -
I have moved a CVI application from an XP machine to a Windows 7 machine. The release executable seems to run fine. I run into strange behavior when I run the program in the debugger, however. This is a multithreaded application and I saw none of these problems on the XP box. One of the first tasks of the program is to display a login panel for the user. This panel is created and displayed exactly one time in the code. When I use the debugger, however, I get two separate panels displayed at different times. A similar thing happens with the Standard I/O window. If a communication error occurs when attempting to open a communication link to a piece of hardware, for example, a message is written to this window (I also have to restore this window from the minimized taskbar version manually to see it, which is another new feature). I put breakpoints on the lines in the code where the login panel was created and displayed and where the comm error message was written and noticed that the panel and error message were displayed prior to the breakpoint being reached. I then selected the "break on first statement" option in the debugger to see what happened. As soon as I run the code, the panel and I/O window appear. If I continue in the debugger, the "real" login panel is eventually displayed. At this point, I have not been able to successfully run this program in the debugger, even though the program hasn't changed since it ran fine on the XP box. I'm running Windows 7 32-bit and CVI 9.0.
You're right: the inconsistent behavior is a typical symptom of erratic concurrent threads.
To be sincere, I have never seen code with more of a single RunUserInterface. It's surely not a standard practice, or at least, a common one.
Having no experience of problems due to this architecture.
The only suggestion that can be given is to carefully analyze the problem, identifying all the assumptions done about temporal sequence of events. Events may come in totally unrelated order.
It can be a nightmare, but it's the only way.
As far as I know and according to the product fact sheet http://www.ni.com/pdf/products/us/lv_execution_trace_toolkit.pdf the Real-Time Execution Trace Toolkit is for RT systems only.
Anyway, as a last resort (and for experimenting a bit) you could be able to force your process to use a single processor (cores should appear as separate processors to operating system).
Look for SetThreadIdealProcessor or SetProcessAffinityMask() in the CVI help (these are Win32 API functions). I never did it, so I cannot help.
If you restrict the process to use a single core, the dramatic problems should magically disappear.
In all the previous discussion I assume that the problems you experienced are not related to timing issues.
The quad core system is surely significantly faster than the older PC, then all the software related timings should be checked.
Carlo A.
Megaris -
Debugging issue in BADI UDM_WL_ITEM_CREATE_C in SAP
Hi Experts,
I have implemented a BADI UDM_WL_ITEM_CREATE_C. This BADI is called when tcode UDM_GENWL is executed in the background. The code in the BADI is getting executed. When i am trying to test the code by placing the debugger inside this BADI and using JDBG to debug in the background this BADI is not getting triggered. Two jobs are created and i tried debugging the entire code for both the jobs but this BADI is not getting hit in debugging.
Please provide your inputs for the same.
Thanks and Regards,
ChiragHi Chirag,
In Background Job cases, I think BADI's can not be debugged directly by putting a break point. There is another way round using SM50. Please follow the below link. It may help you.
https://scn.sap.com/thread/1307038
Maybe you are looking for
-
Error while running Process Order API to import orders - URGENT HELP NEEDED
Hi all, I'm stuck with order import using OE_ORDER_PUB.PROCESS_ORDER api. Wanted to import a simple order in Vision database using the process order api. Figured out the right data to use, inserted into Headers and Lines Iface All tables. When callin
-
External HD will not Mount on desktop
I have a MBP and I have been working with an external Lacie HD and then yesterday when I go to hook it up it won't mount on my desktop. I checked my firewire connection in the system profiler and it is reading the drive. I just cannot see the icon on
-
How to add a suffix to a number
Hi everyone. I have a simple formula that sums the total ammount of cells. I would like the result to have a suffix, as for example the word "ITEMS" if the result of a formula is for example 25, I'd like it to show 25 ITEMS or whatever the word I wan
-
Not exactly sure if this is the place to ask this but I have one of those Innovage Mini Digital Cameras and was wondering if anyone knew where I can a get driver for OS X so it'll be recognized. Thanks in advance.
-
Adding pages to an existing pdf
I have an HP officejet 8600 and scanned pages to create a pdf, no problem. But now I have to add pages to that existing pdf and don't know how to do it.