Debug mode switches off after clicking button

Hi there,
I am trying to use Debug Mode in order to track down a problem, but when I click an application button on a page Debug Mode is being turned off so I do not get the debug output that I am after.
In brief, I am doing the following:
1) Editing the page in Application Builder
2) Clicking the "Run" button to run the page
3) Clicking the "Debug" button to turn Debug Mode on. The page is then redisplayed with debug ouput among the page items.
4) I then type some text into some fields in a form region and click a button in the same region to create a record. The same page is then redisplayed but Debug Mode has now been turned off!
I then tried something similar using the example ORDERS schema under a different workspace and username, and this time Debug Mode remained switched on until I switched it off explicitly.
Is there something I have to do to keep Debug Mode switched on?
Regards.
John.

John,
The branch defined on the page determines whether the current setting of &DEBUG. is used in the URL redirected to. Normally, that wouldn't be set. You'd have to edit the branch (and make it an f?p URL with &DEBUG. or YES in the debug position.
Scott

Similar Messages

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

My phone switches off after showing horizontal lines on the screen during the restore process and then shows the error 9 problem. please help i am so stressed.

Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
Lwando

Read here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue.

Muvo N200 Switches off after 1 tr

I'm experiencing a very very irritating problem with my player. It just switches off after playing single track. This problem only surfaced after using for approximately for 2 - 3 months. The other irritating part is that I couldn't access Recovery Mode and thus could not do any firmware upgrade, etc. Anyone can help me on this issue or must I return to Creative to have it RMA ? Thnx

Not if you don't have any problems with .2.0.
Some people will like .5.0 because it gives support for 3 levels of sub-folders which then allows sync with WMP0. But it also changes the volume scale which others don't like!
PB

My ipad atomatically gets switched off after every 5 mins

From first day only my ipad atomatically gets switched off after every 5 mins and then atomatically gets on after 2-3 mins. is it a hardware problem or some problem in settings? if anybody knows the solution then please let me know....

Is this a brand new iPad2. Did you notice this occurring before you started adding apps? Is this is occurring if you do not have any apps you have started running either active or in the background?
If you have already tried powering off the device, you can try to do a hard reset (Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons.) and see how it runs without starting any apps.
I do not have instructions for doing a restore but that is the only other step that I think of that you can take to resolve a software based problem.
If you are still seeing the behavior after trying most or all of the above, I would suggest taking it in or returning it for service.

Optical audio in Lion switches off after 30 seconds

I have a new iMac 27" Computer purchased November 2010 with Snow Leopard on. I have upgraded to Lion OS the day it came out.
When I started using it, I noticed that the Optical steam (red beam) would switch off after roughly 30 seconds. I researched this issue and found that OS X powers down the Sound Hardware after 30 seconds if not used, as it is fine under Bootcamp with Windows 7.
So I used a program called Sound 1.0,1 to stop the Optical connection switching off, by playing a silent sound every 20 seconds. But now Lion does not support PowerPC programs by Rosetta, so am back to the original problem, that if the hardware has switched off, I miss the first 2 or 3 seconds of the start of the audio, like Skype announcing that some has signed in / out or on MSN as a message notification.
Any ideas to sort this annoying problem be most grateful.
Peter

Thanks for your help Andrew.
Have tried that and seems to be working at the mo (touch wood). See how it goes.
Can't tell you what a difference it is compared to the monitors speakers.
Thanks Again
Peter

Switch off after 20%

Hi ,
For the last two days, i m facing this issue, my iphone4S switch off after battery level goes just below 20%. I need to charge it again to switch ON the mobile.
I have upgraded to iOS 6.1.2 two weeks back. Can anyone please help me, your help will be highly appreciated.

Try fully discharging (until it shuts off) and then fully recharging (don't unplug until 100%) to recalibrate the battery meter. You may need to do this a few times.

Why sound goes off after click on dashboard

Why sound goes off after click on dashboard

All sound or just iTunes?
Try disabling your Widgets one at a time, cause it sounds like maybe you have one that is taking control so that it can be heard?
Dennis

Using the Cyclops speed camera app, the sound on my iPhone 4s switches off after a few minutes. Any ideas?

when using the Cyclops speed camera app the sound on my iPhone 4s switches off after a short while. If I close the app and reopen it, there's still no sound. If I restar the phone and open Cyclops I get sound "welcome to Cyclops" or whatever the greeting is. Has anyone got any ideas?

I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this.

A black see through screen slides down from the top of the Mac and tells me to switch off using power button. Nothing works other than just that. I run sophos up to date and use Safari. Everything is up to date. My Mac is a 21" and is three years old.

As per title. Twice in a few hours. Happened each time when my BT router defaulted to plain public wi-fi and while I waited for airport to locate my router hub I just ticked my hub and boom this dark almost black see through screen slid down and instructed me to switch off using power button. It is a 3 year old desktop 21" and has been faultless until this. I get the default report an unexpected shutdown form and when I fire up it is fine as indeed it is now.
Any help or ideas how to deal with?

That is a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

IMovie files (v6) corrupted after computer switched off at power button

I had two iMovie files open when my computer froze. I had previously successfully dropped both of these files into the auto-play box in iDVD's Map View (so that I could avoid using "themes" in iDVD — a tip I read at this site). When the computer froze (with the screen appearing completely fragmented with multiple colours during a play back in DVD Player of a DVD I'd burned of this same project), I had to switch the computer off at the power button, and since this happened iDVD will not allow these same two iMovie files to be dropped into the auto-play box in iDVD map view. I then tried dropping older movies into the auto-play box, and I've also created a new smaller 'test' movie to drop into the auto-play box and all worked OK. So it appears that the iMovie files that were 'open' at the time the computer had to be switched off are now corrupted. I can play them and edit them, but can't get them into iDVD the way I could before.
Does anyone know if these files can be repaired (easily)?
Would appreciate any help, thanks.
Cheers,
Lehla

Hi,
This seems to be a hardware issue with the printer consider replacing printer
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Ibook remote vga monitors switching off after 30 seconds. (EMERGENCY)

Hi,
I run teleprompter for a major band. I use two white dual usb ibooks as they will run OS9. The only real pro prompter application for the mac never made it successfully to os X (accuprompt). I use two mini VGA to VGA adapters and run 100 ft of VGA cable to two VGA monitors. For no reason I can think of one day the monitors started going blank after 30 seconds as if they were going to sleep. The machines are set to NEVER sleep as are the displays, for battery AND power adapter use. I get a message on the monitors saying "not in optimum mode" and I usually just pressed the auto adjust button on the samsung (syncmaster 730B) flat screen and it would work fine. Now they both shut off after 30 seconds with no indication on the laptop displays. I swapped out the monitor and it was the same. I swapped out the computers with (sick) older ones and they worked. Apparently something changed on the computers........ at the same time. Puzzling......
I deleted the entire preferences folder. Rebuilt desktop, reset nvram and such in open firmware. It is not application based as the desktop disappears from the remote samsungs as well. What could be causing this.... what am I overlooking.... I'm wracking my brain..
many Mac OS X (10.4.3)

How would one check this Dave?
Just flex the connections; it would probably be pretty obvious if something's starting to break. There might also be corrosion or dirt in the iBook's video connector that could cause a problem, though I wouldn't think the symptoms would be the monitors going to sleep, but it's possible; different monitors react differently to signal loss.
Dave, I filter power through a "Monster Power Conditioner"
(http://www.monstercable.com/power/)
Even with those power conditioners, it might still be possible to be picking up ground loops in the video feed unless you're tying the entire electrical system, stage and offstage, into a single high-quality ground point. Using a passive hum suppressor transformer or wideband isolation transformer on the VGA feeds might be helpful. The Gefen units I mentioned should also break any ground loops that might be present. For additional information on video ground loops, this site may be helpful (though you may already know all this already).
Good luck.

Nokia CK-7W Car Kit won't switch off after switch...

Hi,
I have a CK-7W car kit (connected via bluetooth).
Recently, the car kit has been reconnecting 2 to 3 seconds after switching the engine of the car off. I cannot seem to stop this from happening, even when clearing memory or even disconnecting the car battery for 20 mins.
Any advice on how to reset the car kit would be helpful.
Thanks,
Chris

Thanks for the response.
The car kit was installed by a Car Phone Warehouse Nokia approved fitter about 4 years ago The kit has worked really well until recently!
The contol button doesn't seem to be stuck in and responds as it should to button presses. In terms of the cable being squashed or damaged. Obviously there is a chance, but in actual fact, only an inch is on show before it is hidden behind the dashboard. In this instance I'm not sure what damage might occur since I don't know how to remove the dash!
Apologies, I'm not certain I understand your comment re:
- "You can rule out the button by disconnecting it then starting the car and connecting, before switching off the car to see if the kit shuts down."
How do I disconnect the button? Does it pull away from the lead / cable?
Many, many thanks for your help,
Chris

Why does audio in Tremolo and Legato mode cut off after 3 or 4 seconds???

Question regarding the symphony orchestra section when it comes to bass, string, cello, viola in Tremolo and Legato modes: why does the sound cut off after 3 seconds.
Let's say you have Viola, Tremolo section selected, how do you make the sound not cut off after 3 seconds. What if you want it lasting 6 or 7 seconds???
Can you override that limitation???
Thanks very much in advance,
- Nicholas

Most likely a network issue. Power cycle the router.
Disable any firewall on the computer, if issue is using AirPlay from a computer.
Ensure the router is running the most current firmware.
If the ATV is connected via Wi-Fi, try ethernet.
Change the Wi-Fi channel if ethernet is not an option.

Switch Off Right Click Options in Webdynpro table

Hi all,
Can we switch off the right-click options that show up when a user is displaying a webdynpro abap table?
I dont want users to be able to hide columns. There does not, however, seem to be a setting which controls this - it seems to be always on???
Cheers,
Brad

Nice.
This fixes the problem. Again this was an SP11 thing (the system I am on is SP10 and didnt have this parameter), but OSS note 990724 provides this functionality.
The trick with all users being affected was just me being stupid. The application I have developed is a password reset tool for people who have forgotten their passwords (connected to CUA so you can fix passwords on all systems) so of course I didnt want them to have to log in (it uses Active Directory for user authentication, not SAP security). So I connect them via an external alias with a fixed username and password - which means one technical user for all people accessing the application. So if one person changes it, they change it for all...
Switching off personalisation does the job, however, thanks a lot. Next time I will look on my SP11 system for parameters before asking questions.
Brad

Debug mode switches off after clicking button

Similar Messages

Maybe you are looking for