Debug Procedure using JDev10g

I was using Oracle JDeveloper 10g to debug a pl/sql procedure. I used to do it on different Oracle server and debug works fine. This time, after I let DBA granted the DEBUG connect session and DEBUG any procedure priviledges, I got new problem.
I did not turn on remote debugger in project setting. The IP address is tied to Nortel IPSECSHM adaptor.
Connecting to the database CMENTDEV.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '169.254.241.150', '3548' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database CMENTDEV.
Any help will be appreciated. Thank you very much.

Shay,
I have downloaded the jdev zip file from oracle.com and then unzipped it on my machine. I try to start jdev using jdev/bin/jdevw.exe and then create a db connection and then a simple procedure.
When I run the procedure, it works fine. But when I debug it, I get the error "ORA-30683: failure establishing connection to debugger".
Connecting to the database TST.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '192.168.10.55', '3208' )
ORA-30683: failure establishing connection to debugger
ORA-12541: TNS:no listener
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database TST.
This database is hosted on a unix machine on our network.
I installed 9i database on my machine (same as jdev machine) and debug works for that database. Can you please advise what could be the issue?
Also, the project properties page looks different in my jdev. There is no option for remote debugging. I am using 10.1.2.1.0 (build 1913) of jdev.
Thanks,
Gaurav.

Similar Messages

Not able to debug procedure using oracle 11g & toad 9.0.1.8

hi..
i m using oracle 11g & toad 9.0.1.8 ..i want to debug procedure , i set parameter, but not able to debug procedure , there is 'debug' option, but that option is disable..
can u plz help me regarding this..
can u suggest me another tool where i can debug my procedure..
thanx..
Edited by: user10502250 on Jun 22, 2009 4:15 AM

"Help, About" should list the installed options, and "Debugger" should be in the list otherwise you'll need an expensive upgrade or a change of IDE.
In TOAD you have to open the source code editor, at which point the debugging options should be accessible. You can either set a breakpoint and hit the 'Execute' lightening symbol, or place the cursor at a suitable point in the code and press F12.
I'm not completely sure how you are supposed to pass runtime parameters but it may be to do with right-click, Action Console, Execute, which brings up a 'Set Parameters' dialog. However this won't run in debug mode, it just runs and remembers the arguments. I don't really get it. As you can probably tell I'm not a great fan of the product. Have you looked at PL/SQL Developer?

Debugging Procedures using dbVarName

It seems as though debug information is not returning the
names of parameters called in a stored procedure. When using the
"dockable" debug panel, the information under stored procedures
shows data in the "type", "CFSQLType", "value" and "variable"
columns, but nothing under the "dbVarName" column.
Furthermore, if I run the following code snippet:
<cfobject action="create" type="java"
class="coldfusion.server.ServiceFactory" name="factory">
<cfset cfdebugger = factory.getDebuggingService()>
<cfset qEvents = cfdebugger.getDebugger().getData()>
<cfset qEvents = duplicate(qEvents)>
<cfdump var="#qEvents#">
... the name of each parameter called is nowhere to be seen
in the resulting dump.
I'm running:
Update Level /C:/CFusionMX7/lib/updates/hf702-52712.jar
Is there any way to resolve this issue?

The other pieces we need to know are what DBMS and which
drivers. Not all DBMSs and JDBC drivers support dbvarname. Also,
you need the latest MM JDBC drivers - 3.5 or Microsoft's own latest
jdbc driver for MSSQL. Oracle thin does not support it.

Cannot debug procedure in 11g database using SQL Developer

Hi,
We have recently migrated our database from 10.2.0.4 to 11.2.0.2. We were able to debug procedures using PL/SQL Developer earlier but after 11g migration we are not able to debug the same procedure in 11g database.
Is it that we require 11g PL/SQL developer with 11g client installed to debug?

11g has a new privilege required to debug stored procedures, DEBUG CONNECT SESSION.
Does your user have this priv?
No client required to debug, but if you ARE using a client via OCI THICK preference, be sure that the client version matches the server version.

Debugging procedure or packages using sql*plus reg

Dear all,
I am new to oracle, can any body provide me some information related to this below issues.
a) suppose i have created a procedure using sql*plus tool then next day i wanted to debug or modify my stored procedure.
Then what could approach using sql*plus
b) same case if we consider for packages then for any specific stored procedure or functions what would be the approach to debug or modify using sql*plus
yours cordination will be highly appreciate
Thanks n regards
Laxman

Using SQL*Plus you can debug your stored pl/sql code only adding some "prints" in your code:
SQL> create or replace procedure test is
2 begin
3 dbms_output.put_line('starting...');
4 --do something here
5 dbms_output.put_line('done step 1');
6 --do something else here
7 dbms_output.put_line('end procedure...');
8 end;
9 /
Procedura creata.
SQL> set serverout on
SQL> exec test
starting...
done step 1
end procedure...
Procedura PL/SQL completata correttamente.Or writing logs in a log table:
SQL> create table logtab(ts timestamp(9),mess varchar2(4000));
Tabella creata.
SQL> create or replace procedure test is
2 begin
3 insert into logtab values(systimestamp,'starting...');
4 --do something here
5 insert into logtab values(systimestamp,'done step 1');
6 --do something else here
7 insert into logtab values(systimestamp,'end procedure...');
8 end;
9 /
Procedura creata.
SQL> exec test
Procedura PL/SQL completata correttamente.
SQL> col ts for a40
SQL> col mess for a40
SQL> select * from logtab;
TS                                       MESS
25-DIC-09 15:33:13,656000000             starting...
25-DIC-09 15:33:13,656000000             done step 1
25-DIC-09 15:33:13,656000000             end procedure...Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com]

How to bind arrays to PL/SQL stored procedure using OCI?

Hi,
We are having problems trying to bind arrays to PL/SQL stored procedure using OCI. Here is the situation:
- We have a stored procedure called "GetVEPFindTasks" with the following interface:
PROCEDURE GetVEPFindTasks (
p_ErrorCode OUT NUMBER,
p_ErrorMsg OUT VARCHAR2,
p_RowCount OUT NUMBER,
p_VEPFindTasks OUT t_VEPFindTaskRecordTable,
p_MaxTask IN NUMBER);
t_VEPFindTaskRecordTable is a record with the following entries:
TYPE t_VEPFindTaskRecord IS RECORD (
RTCID NUMBER,
TransNum NUMBER,
TransTimestamp VARCHAR2(20),
Pathname1 image_data.pathname%TYPE,
Pathname2 image_data.pathname%TYPE,
Pathname3 image_data.pathname%TYPE,
OperatorID operator.id%TYPE);
- Now, we are trying to call the stored procedure from C++ using OCI (in UNIX). The call that we use are: OCIBindByName and OCIBindArrayOfStruct to bind the parameters to the corresponding buffers. We bind all parameters in the interface by name. Now, we do bind the record's individual item by name (RTCID, TransNum, etc.), and not as a record. I don't know if this is going to work. Then, we use the bind handles of the binded record items (only record items such as RTCID, TransNum, and NOT error_code which is not part of the record) to bind the arrays (using OCIBindArrayOfStruct).
All of the parameters that are binded as arrays are OUTPUT parameters. The rest are either INPUT or INPUT/OUTPUT parameters. Now, when we try to execute, OCI returns with an error "Invalid number or types of arguments" (or something to that sort... the number was something like ORA-06550). Please help...
Is there any sample on how to use the OCIBindArrayOfStruct with PL/SQL stored procedures? The sample provided from Oracle is only for a straight SQL statement.
Thank's for all your help.
** Dannil Chan **

As you said:
You have to pass in an array for every field and deconstruct/construct the record in the procedure. There is no support for record type or an array of records. Can you give me a example? I'am very urgently need it.
thanks
email: [email protected]

How can i send an e-mail to several mail adress typing a group name, similar procedure used un gmail

IN IPAD AIR How can i send an e-mail to several mail adress typing a group name, similar procedure used un gmail wich is very frendly

Before all these updates, one used to be able to create a Group (such as Buddy List), then send emails by clicking on that Group Name. Has not worked for a long time now, though. I wish they would bring it back.

How to pass a array of object to oracle procedure using callable

Hi,
I am calling a oracle stored procedure using callable statement which has IN and OUT parameter of same type.
IN and OUT are array of objects. (ie) IN parameter as Array of Objects and OUT parameter as Array of Objects
here are the steps i have done as advised from oracle forum. correct me if i am in wrong direction
ORACLE types and Stored Procedure
CREATE OR REPLACE
TYPE APPS.DEPARTMENT_TYPE AS OBJECT (
DNO NUMBER (10),
NAME VARCHAR2 (50),
LOCATION VARCHAR2 (50)
CREATE OR REPLACE
TYPE APPS.DEPT_ARRAY AS TABLE OF department_type;
CREATE OR REPLACE package body APPS.insert_object
IS
PROCEDURE insert_object_prc (d IN dept_array, d2 OUT dept_array)
IS
BEGIN
d2 := dept_array ();
FOR j IN 1 .. d.COUNT
LOOP
d2.EXTEND;
d2 (j) := department_type (d (j).dno, d (j).name, d(j).location);
END LOOP;
END insert_object_prc;
END insert_object;
JAVA CODE
Value Object
package com.custom.vo;
public class Dep {
public int empNo;
public String depName;
public String location;
public int getEmpNo() {
return empNo;
public void setEmpNo(int empNo) {
this.empNo = empNo;
public String getDepName() {
return depName;
public void setDepName(String depName) {
this.depName = depName;
public String getLocation() {
return location;
public void setLocation(String location) {
this.location = location;
to call stored procedure
package com.custom.callable;
import com.custom.vo.Dep;
import oracle.jdbc.OracleCallableStatement;
import oracle.jdbc.OracleConnection;
import oracle.jdbc.OracleTypes;
import oracle.jdbc.pool.OracleDataSource;
import oracle.sql.ARRAY;
import oracle.sql.ArrayDescriptor;
import oracle.sql.Datum;
import oracle.sql.STRUCT;
import oracle.sql.StructDescriptor;
public class CallableArrayTryOut {
private static OracleDataSource odcDataSource = null;
public static void main(String[] args) {
OracleCallableStatement callStatement = null;
OracleConnection connection = null;
try {
odcDataSource = new OracleDataSource();
odcDataSource
.setURL("......");
odcDataSource.setUser("....");
odcDataSource.setPassword("....");
connection = (OracleConnection) odcDataSource.getConnection();
} catch (Exception e) {
System.out.println("DB connection Exception");
e.printStackTrace();
Dep[] dep = new Dep[2];
dep[0] = new Dep();
dep[0].setEmpNo(100);
dep[0].setDepName("aaa");
dep[0].setLocation("xxx");
dep[1] = new Dep();
dep[1].setEmpNo(200);
dep[1].setDepName("bbb");
dep[1].setLocation("yyy");
try {
StructDescriptor structDescriptor = new StructDescriptor(
"APPS.DEPARTMENT_TYPE", connection);
STRUCT priceStruct = new STRUCT(structDescriptor, connection, dep);
STRUCT[] priceArray = { priceStruct };
ArrayDescriptor arrayDescriptor = ArrayDescriptor.createDescriptor(
"APPS.DEPT_ARRAY", connection);
ARRAY array = new ARRAY(arrayDescriptor, connection, priceArray);
callStatement = (OracleCallableStatement) connection
.prepareCall("{call insert_object.insert_object_prc(?,?)}");
((OracleCallableStatement) callStatement).setArray(1, array);
callStatement.registerOutParameter(2, OracleTypes.ARRAY,
"APPS.DEPT_ARRAY");
callStatement.execute();
ARRAY outArray = callStatement.getARRAY(2);
Datum[] datum = outArray.getOracleArray();
for (int i = 0; i < datum.length; i++) {
oracle.sql.STRUCT os = (oracle.sql.STRUCT) datum[0];
Object[] a = os.getAttributes();
for (int j = 0; j < a.length; j++) {
System.out.print("Java Data Type :"
+ a[j].getClass().getName() + "Value :" + a[j]
+ "\n");
connection.commit();
callStatement.close();
} catch (Exception e) {
System.out.println("Mapping Error");
e.printStackTrace();
THE ERROR
Mapping Errorjava.sql.SQLException: Inconsistent java and sql object types
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
at oracle.sql.StructDescriptor.toOracleArray(StructDescriptor.java:823)
at oracle.sql.StructDescriptor.toArray(StructDescriptor.java:1735)
at oracle.sql.STRUCT.<init>(STRUCT.java:136)
at com.custom.callable.CallableArrayTryOut.main(CallableArrayTryOut.java:48)

You posted this question in the wrong forum section. There is one dedicated to Java that was more appropriate.
Anyway here is a link that describes what you should do.
http://download.oracle.com/docs/cd/B19306_01/java.102/b14355/oraarr.htm#i1049179
Bye Alessandro

Running a stored procedure using isqlPlus

I have written a simple stored procedure which takes EMPLOYEE_ID as IN parameter returns EMPLOYEE_FIRST_NAME as OUT parameter (For Learning purpose only)
How do I run this stored procedure using isqlPlus.
Below is my stored procedure.
CREATE OR REPLACE PROCEDURE "HR"."MY_PROC_2" (
EMPLOYEE_ID_NUM in NUMBER,
EMPLOYEE_FIRST_NAME out VARCHAR2
as
begin
Select FIRST_NAME into EMPLOYEE_FIRST_NAME from Employees
where Employee_ID = EMPLOYEE_ID_NUM;
return;
end;

did you run that same procedure in SQL*Plus and it functioned ?
Joel P�rez

Java Stored Procedure using XSU on 9i Lite

I have create Java Stored Procedure using XML SQL Utility to return results in XML format. I have tested the stored procedure on the development machine (with SDK and Webtogo)without any problem. When I tested it on the client machine (with only the lite database for Window download from the webtogo server as part of the setup), there's an error [POL-8035] no such attribute or method when I call the procedure through MSQL. However, after calling the stored procedure the 3rd times, it will return the results in XML. Once I logout after that, I will have to call the same SP 3 times (always 3 times) before I get the results.
I'm running on Win2000, Oracle lite 5.0.1. with jdk 1.3.1 - same for the development machine.
I'm using the same xsu12.jar file.
What did I miss?

Nothing?
No one? No ideias?
Regards,
Flavio Matiello

Error while Executing stored procedure using ant

Hi,
I am trying to execute a stored procedure using ant ..
My build.xml is like this...
<project name="myproject" default="db.build">
<target name="db.build">
<sql driver="oracle.jdbc.driver.OracleDriver"
url="jdbc:oracle:thin:@idm.orademo.com:1521:orcl"
userid="test"
password="oracle11g"
print="yes"
classpath="E:\\ojdbc14.jar"
src="E:\\upg_9102BP07.sql" />

</target>
</project>
I have my stored procedure in upg_9102BP07.sql as shown in above src..
When im executing ant cmd I got the following exception
E:\>ant -f test.xml
Buildfile: test.xml
db.build:
*[sql] Executing resource: E:\upg_9102BP07.sql*
*[sql] Failed to execute: declare cnt int*
BUILD FAILED
E:\test.xml:12: java.sql.SQLException: ORA-06550: line 1, column 15:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
*:= . ( @ % ; not null range default character*
Total time: 44 seconds
I have no clue.. But this sql ran successfully when did manually..
Please help me in solving the issue...
-- Marias

Here is my script bit lengthy...
Rem
Rem $Header: oim/server/Database/Oracle/Upgrade/Release91x/910x/List/9102_ddl_AddcolumnToRCE_Oracle.sql st_oim_devjain_bug-9003841/1 2009/10/09 02:24:19 devjain Exp $
Rem
Rem 9102_ddl_AddcolumnToRCE_Oracle.sql
Rem
Rem Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
Rem
Rem NAME
Rem 9102_ddl_AddcolumnToRCE_Oracle.sql - <one-line expansion of the name>
Rem
Rem DESCRIPTION
Rem Create a new column 'RCE_DELETE' in RCE table
Rem
Rem MODIFIED (MM/DD/YY)
Rem blaksham 09/30/09 - Created
Rem
declare cnt int;
Begin
     Select Count(1) into cnt From User_Tab_Columns Where TABLE_NAME='RCM' And COLUMN_NAME='RCM_DELETE';
     IF cnt=0 Then
     Begin
          Execute Immediate 'ALTER TABLE RCM ADD RCM_DELETE VARCHAR2(1)';
     End;
     Else
          DBMS_OUTPUT.PUT_LINE('Column already exists in the DB');
     End IF;
End;
Rem
Rem $Header: oim/server/Database/Oracle/Upgrade/Release91x/910x/List/9102_dml_odf_source_name.sql st_oim_devjain_bug-9003841/1 2009/10/09 02:44:45 devjain Exp $
Rem
Rem 9103_dml_odf_source_name.sql
Rem
Rem Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
Rem
Rem NAME
Rem 9103_dml_odf_source_name.sql - <one-line expansion of the name>
Rem
Rem DESCRIPTION
Rem <short description of component this file declares/defines>
Rem
Rem NOTES
Rem <other useful comments, qualifications, etc.>
Rem
Rem MODIFIED (MM/DD/YY)
Rem vpotukuc 09/17/09 - Bug8796435: Increase the size of odf_source-name
Rem vpotukuc 09/17/09 - Created
Rem
SET ECHO ON
SET FEEDBACK 1
SET NUMWIDTH 10
SET LINESIZE 80
SET TRIMSPOOL ON
SET TAB OFF
SET PAGESIZE 100
declare
collen NUMBER := 0;
begin
select char_length into collen from user_tab_columns where table_name = 'ODF' and column_name = 'ODF_SOURCE_NAME';
IF (collen < 400) then
execute immediate 'alter table ODF modify ODF_SOURCE_NAME varchar2(400)';
END IF;
END;
File name: 91_dml_update_reviewers_With_NoEmail_attestation.sql
Purpose: Modify the email template to replace the 'Delegated By Last Name' with 'Reviewer Last Name' and 'Delegated By User Id' to 'Reviewer User Id'.
Author: Babu Lakshamanaiah
Description: Modify the email template 'Attestation Reviewers With No E-mail Addresses Defined'
declare
cnt int;
begin
Select Count(1) into cnt From emd Where emd_name='Attestation Reviewers With No E-mail Addresses Defined' and emd_language='en' and emd_country='US';
IF cnt=0 Then
Begin
DBMS_OUTPUT.PUT_LINE('There is no record with emd_name Attestation Reviewers With No E-mail Addresses Defined ');
End;
Else
update emd set emd_body='The following attestation reviewers do not have email addresses defined. Attestation requests have been generated for these reviewers and can be accessed by loging in to Oracle Identity Manager. However, notification emails were not sent.' ||chr(10) || chr(10) ||
'Attestation process: <Attestation Definition.Process Name>' || chr(10) ||
'Attestation Request ID: request <Attestation Request.Request Id>' || chr(10) ||
'Request date: <Attestation Request.Request Creation Date>' || chr(10) || chr(10) ||
'Reviewers Without E-mail Address: <reviewers> ' || chr(10) ||
'<Attestation Task.Reviewer First Name> <Attestation Task.Reviewer Last Name> [<Attestation Task.Reviewer User Id>]' Where emd_name='Attestation Reviewers With No E-mail Addresses Defined' and emd_language='en' and emd_country='US';
End IF;
commit;
end;
Please help me out.....
--Marias

Improve the performance in stored procedure using sql server 2008 - esp where clause in very big table - Urgent

Hi,
I am looking for inputs in tuning stored procedure using sql server 2008. l am new to performance tuning in sql,plsql and oracle. currently facing issue in stored procedure - need to increase the performance by code optmization/filtering the records using where clause in larger table., the requirement is Stored procedure generate Audit Report which is accessed by approx. 10 Admin Users typically 2-3 times a day by each Admin users.
It has got CTE ( common table expression ) which is referred 2 time within SP. This CTE is very big and fetches records from several tables without where clause. This causes several records to be fetched from DB and then needed processing. This stored procedure is running in pre prod server which has 6gb of memory and built on virtual server and the same proc ran good in prod server which has 64gb of ram with physical server (40sec). and the execution time in pre prod is 1min 9seconds which needs to be reduced upto 10secs or so will be the solution. and also the exec time differs from time to time. sometimes it is 50sec and sometimes 1min 9seconds..
Pl provide what is the best option/practise to use where clause to filter the records and tool to be used to tune the procedure like execution plan, sql profiler?? I am using toad for sqlserver 5.7. Here I see execution plan tab available while running the SP. but when i run it throws an error. Pl help and provide inputs.
Thanks,
Viji

You've asked a SQL Server question in an Oracle forum. I'm expecting that this will get locked momentarily when a moderator drops by.
Microsoft has its own forums for SQL Server, you'll have more luck over there. When you do go there, however, you'll almost certainly get more help if you can pare down the problem (or at least better explain what your code is doing). Very few people want to read hundreds of lines of code, guess what's it's supposed to do, guess what is slow, and then guess at how to improve things. Posting query plans, the results of profiling, cutting out any code that is unnecessary to the performance problem, etc. will get you much better answers.
Justin

Generating Web Service from PL/SLQL procedures using ODSI

1) Is there a way for us to generate REST based web services from PL/SQL procedures using Oracle data services Integrator? If Yes, Can you please point me to any available documentation
2) I am trying to create a phyiscal data source based on PL/SQL procedures in the hope of turning these data sources into web services. I created a JDBC connection in web logic server console and am trying to view the packages under APPS but ODSI always crashes after selecting APPS. Is there a way to resolve this?
Thanks
Bhanu

Hi..
We came accross this problem a while back (I think it was us that the patch was created for). The patch was released under CR369707.
Additionally it took us a while to figure out how to use it correctly.. Here's the info for it from a mail i receievd from our support contact..
Here is more information from engineering on the patch:
This is patch for filtering Stored Procedures in the New Physical Data Service Wizard. It is a partial fix to the problem. It just does filtering - it still retrieves all the jdbc metadata for everything that matches the filter. Ideally, the wizard would let you explore the stored procedures - retrieving the name only - and once you selected a stored procedure, it would retrieve the argument types (which is the expensive part).
Copy these two files to a safe place
<bea_home>\<aldsp_home>\eclipse-plugins\dsp\eclipse\plugins\com.bea.dsp.ide.external_10.3.0\dsp-ide-ldshredder.jar
<bea_home>\<aldsp_home>\eclipse-plugins\dsp\eclipse\plugins\com.bea.dsp.ide.import_metadata_10.3.0.jar
Replace the files with the ones provided in the patch (which I sent you be eMail recently).
Creating Relational Database Physical Data Services -> Stored Procedures will be affected as follows :
The Search field used to represent a pattern for the stored procedures only, and this patterns were applied against every schema visible to ALDSP. The patch allows you to also specify a list of catalogue patterns (useful only when applicable), a list of schema patterns and a list of procedure name patterns. These lists are separated by the pipe symbol, and the lists themselves are command-separated. The catalogue and schema patterns are regular expressions, the procedure pattern is for a database 'like' clause. For, Oracle, the catalogue patterns are not applicable.
Example:
|ODM1,ODM2|B% // look in schemas containing the strings ODM1 or ODM2 for procedures that start with B
// possible results would be MY_ODM1.BUILDER, ODM2.BOTTOM
|^ODM$|B%D // look in the ODM schema for procedures that start with B and end with D.
Also - if there is a search string in the Search box, that search string will be applied to the schema when you click on the + to expand it in the Tree.
Note that once a schema has been 'explored' - either by a search, or by expanding it in the tree, further searches will not update it's children. You would need to quit the wizard and restart.
Once you get the patch if you have issues let me know..

How to get resultset from oracle procedure use ejb3

how to get resultset from oracle procedure use ejb3
i know oracle procedure should like this
Create or replace PROCEDURE resultset_test(
aaa IN NUMBER,
bbb OUT sys_refcursor) ....
but what s the ejb3 scripts looks like? please give me an example or link~
ths

- there are no EJB3 scripts, only compiled application code
- the part of the EJB spec that deals with databases is called the Java Persistence API, but likely you are just looking for the JDBC API.
Now you should know what to Google to get your "example script": "java jdbc oracle procedure"

How to pass array of Object in A Procedure using OCCI.......

I m also trying for How to pass Object to a procedureb using OCCI...
Steps....
1. I created A type.....
2. Then I created a VARRAY using that Type.
3.After that I have written An Procedure with object as a parameter..
now using OCCI how do u bind the parameter with this . plz note that using OTT
i have already created the class representation of above object type i.e class
four Files Created 1> demo.h 2>registermapping.h
3> demo.cpp 2>registermapping.cpp
After I want to Pass the Values in A Vector...
vctor<full_name *> vect;
stmt=con->createStatement("BEGIN Add_Object(:1); END;");
full_name *name1 = new full_name; //Giving the Error here Given below....
name1->
name1->
Through name1 Which Function I will call in which I will Pass a String....
like
name1->readSQL("Sanjay"); Or I have to add a function......
vect.push_back(name1);
setVector(stmt,1,vect,"FULL_NAME");
error C2259: 'FullName' : cannot instantiate abstract class
can u plz suggest me Why this Error is Giving......?
How to pass the data?
setFirst_name() and setLast_name() this two function I will add in Demo.cpp which one created automativcally by Using OTT command.....or other way plz tell me Boss ....
Can u lz Suggest me ASAP....

hi Nishant ,
What u have done Now I mm trying ....
can u Plz Suggest me......
How to pass and Array of Object in Procedure using OCCI... Doing....
90% finished Two Error's Are Coming...
1> If I create the Class then Data Not Inserting table......
2> If I will create the Class through OTT command.......
then U can't Instantiate Object It is DIsplying ,this is Abstract Class(PObject)...
Beco'z the below Method is Not adding Automatically by OTT command which is Pure Virtual Function.....
But I added this Function Still SAme Error Giving..
getSQLTypeName(oracle::occi::Environment env, void *schName,
unsigned int &schNameLen, void **typeName,
unsigned int &typeNameLen) const
Plz Suggest me....
regard's
sanjay

Debug Procedure using JDev10g

Similar Messages

Maybe you are looking for