Debugging in Flash Pro CS6 is outright broken for me

I started a project in 5.5 and downloaded the trial of 6 to try it out, but I'm having really big troubles debugging in 6. It's an AIR for Android project.
Basically, when I start debugging, most of the time the app will just close immediately. If it doesn't, I can tinker around for a couple of minutes, 3 or 4 at most, and then it closes. It doesn't say why, just the usual [UnloadSWF] and Debug session terminated. I have found nothing that consistently makes it terminate, makes it work upon starting, or anything in between. All seems totally random, and didn't happen AT ALL in 5.5.
I can't be the only one having this problem but I can't find any posts about it. Any help would be greatly appreciated.

I'm having a similar problem (although I know this post is a few months old, I can't seem to find an answer)
When I run out of CS6 in debug mode to test my project (working in AIR for iOS), the project gets up and running, but more than half the time it will then simply close and all I get is:
Unload[SWF] blahblahblah.swf
Debug session terminated
Debug session terminated
(yes, it says it twice)
this can happen within ten seconds or two or three minutes later.  There seems to be no pattern to what causes it (simply leaving the project up and not interacting with it will cause it to eventually happen, or I can click around in the project for a few minutes and then it will randomly happen).  This is really killing my production schedule as the project is already very large and simply running the debugger takes a few minutes to load up just to have it crash and then have to run the debugger again and wait for it to load again.  I ran the same project in 5.5 a while back before switching to 6.0 and never encountered this problem.
anyone figure this out yet?

Similar Messages

  • Flash Pro CS6にて「AIR 3.4 for iOS」で.ランタイム共有ライブラリの警告が出てしまう.

    「Flash CS6」を、Windows 7(32bit)で利用しています。
    現在、iOS用のAIRアプリを作成を試みておりますが、パブリッシュの際に下記の警告が出力ウィンドウに表示されます。
    警告 : ランタイム共有ライブラリ (RSL) としてリンクされているライブラリがありません。原因となるパブリッシュ設定 : AIR 3.4 for iOS
    設定は「AIR for iOS（3.4）」で、3.2としても同様の警告が現れます。
    ipaファイルは正常？に作成されますので、それを登録済みのiPhoneやiPadにインストールし、起動することができます。
    しかし、プログラムに記述したNativeExtension（NetworkInfoなど）の機能が動きません。。。
    CS6上の「制御」→「ムービープレビュー」→「AIR Debug Launcher(モバイル)を使用」で動かすと、上記のNativeExtensionの機能が動いています。
    上記のライブラリがリンクされていないことが原因かと思いますが、Flash CS6上でどのような設定を行えば、警告が出なくなるのでしょうか？
    一応、実機でのインストールや起動も出来ますので、プロビジョニングファイルやp12ファイルは正しく設定できていると思いますが。
    開発環境は以下の通りです。
    ・Flash Professional CS6
    ・Windows 7(32bit)
    ・AIR SDK：3.4 for iOS
    ネット上を探してみましたが、手がかりがなく、困っております。
    どなたかご存知の方がいらっしゃいましたら、よろしくお願いします。

    Native Extensionsに関して参考になりそうなページがあったのでお知らせします。
    こちらの説明をみて設定を確認してみてください。
    ネイティブ拡張（ANE）の使い方 for Flash Professional CS6
    http://www.adobe.com/jp/devnet/flash/articles/flashpro_ios_ane.html
    Using native extensions in Adobe Flash Professional CS6
    http://www.adobe.com/devnet/air/articles/using-ane-in-flash.html

  • Compiling Issue in Flash Pro CS6

    Hi,
    When I try to test my project (CTRL + Enter), it displays a blank window if publication target is superior or equal to 10.3, in Flash Pro CS6, either AS2 or AS3. Even if it's a new empty project with just a background color set and a trace("ok"); on the first frame, it does strictly nothing. White and no message in the debug console.
    If I change the target to 9, it works, although the scene color is still not displayed.
    In both cases, when I open the generated swf file directly from my explorer (Windows 7), it works, although the scene color is not displayed.
    Worked perfectly until now, can't remember of a recent update but maybe the last one did that.
    Does anyone know how to fix that ?
    Thank you !

    Hey,
    I've solved my problem installing the Flash Pro CC trial version.
    I wanted to test if it worked under CC, but it seems to have solved the problem in Flash CS6 too. Everything is back to normal.
    I guess we can say this is a solved issue, even if I don't know why. Maybe reinstalling Flash CS6 would have done the trick too. Can't tell.

  • How to install latest AIR SDK (13 or 14) in Flash Pro CS6?

    Hi, I'm using Adobe Flash Pro CS6 on Windows 7 64-bit and I wanted to add latest Adobe AIR SDK, either 13 or 14, but non of them is seen as a valid SDK by Flash.
    I've tried downloading two possible SDKs (SDK & compiler and SDK without compiler) from here: Download Adobe AIR SDK (version 13) and here http://labs.adobe.com/downloads/air.html (version 14). Each time I copied the extracted SDK folder to my Flash CS6 folder where default 3.2 and 3.4 SDKs are located. After that I open Flash, then Help > Manage Air SDK, click on " + ", browse for the new folder, and all I get is "The selected folder does not contain a valid AIR SDK" warning message. It all looks the same with all four SDKs I downloaded!
    Not long ago I added AIR 4.0 without any problems. What am I doing wrong? Is new SDK Flash CC only or what?

    What are you naming the folder?
    Just as a general tip, since many applications (Flash CS4, 5, 5.5, 6, CC) you can save some space by only putting the AIR SDK in one place. Since CS6 and CC have "Manage AIR SDK" in their settings you no longer need to locate that folder like 5.5 which requires you to overlay the AIR 2.6 folder. So save some space and put it anywhere out of the way, out of the Flash folder. I have multiple drives and I have lots of SDKs installed at root on my E:\ (E:\SDK\AIR, E:\SDK\JDK, E:\SDK\Android, etc). I then just go in the help panel like you do and point CS6 and CC to E:\SDK\AIR and they work perfectly fine with the latest SDK released recently.
    Are you updating Flash Player to 13 as well?
    Last, do not download the Flex version for Flash. Flex is for Flash Builder if you intend on using Flex (it is different than Flash).
    Do not get this:
    You want the SDK from the big orange buttons above this warning.

  • Error installing Flash Pro CS6

    I'm trying to install Flash Pro CS6 but I keep getting the following error (the message is in portuguese) after running the .exe file (downloaded directly from Adobe's oficial website).
    I've tried it in 3 different computers with Windows 8 and in one computer with Windows 7 and all of them give me the same error. I'm using an Admin account so that's not the problem!

    The problem is happening when I try to extract the downloaded files from the .exe to another folder. The application has all the permissions available
    Here is another picture of the initial screen when I double click the .exe file.
    I've tried to extract it to other folders, like "Documents", "Downloads", but It gives me the same error as before.

  • Back button doesn't work in Flash Pro CS6 Simulator (ADL)

    Hi everyone. I'm testing Flash Pro CS6, and I've noticed the Back button is not detected in my Android app when testing in ADL (Control / Test movie / In ADL Mobile).
    When I try to select the option Device / Back (Ctrl+B) in ADL, it just doesn't do anything (I have a KEY_DOWN event listener which looks for the keycode Keyboard.BACK). In a real Android device, it works, but not in the "test movie" window (ADL). In CS5.5, the Back button always worked in ADL.
    Also, in the new Simulator window which comes up when "testing movie", there are "Menu", "Back" and "Search" buttons for easier access. Well, that Back button doesn't do anything, either.
    Does anyone know what's happening?
    BTW, I don't find the "Simulator" window too useful for my purposes. How can I disable it, so it doesn't automatically come up?
    Thanks!
    Edit: Well, it seems the KEY_DOWN event listener doesn't work for any key, not only the Back button.

    WHOWWW...
    suitable for Flash Player 11.6
    Back that down to as low a version as possible... 10 or so if possible.
    My advice.... never... ever target the latest version of plugin... most users will NOT have that plugin installed.
    Back it down and if that doesn't work, post a link to the actual Web page.
    Best wishes,
    Adninjastrator

  • How do I get someone to activate my Flash pro cs6 after I properly deactivated it and now it won't reactivate.  I need a phone number or email address or something.

    I may need to reformat my computer soon.  It has been acting badly.  So, in accordance with instructions I have gotten from FLASH I deactivated Flash Pro CS6 before I turned off my computer to save myself a problem if the computer died before I deactivated FLASH.  Now, when I get back into FLASH PRO CS6 the "deactivate" button is grayed.  Who do I talk to about this and how do I contact them?

    See if the following helps...
    Activation & Deactivation Help
    If not, here is a contact link for chat.  For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • BUG - saving with both flash pro CS6 and CC causes library symbol names to change

    Concise problem statement:
    If you save with flash pro CC and then save with CS6, in the library panel, symbol names are changed.
    Specifically, pipes | and trailing spaces ("|Divider", "Divider ") get replaced by escape sequences ("&#124Divider", "Divider&#032" ...) Ampersands & and number signs # also get replaced, such that symbol names grow exponentially if you continue to save with both flash pro CC and CS6 ("Divider&#032", "Divider&#038&#035032", "Divider&#038&#035038&#038&#035035032" ...) This makes it difficult to transition a team from CS6 to CC.
    Sometimes, the original-name symbol remains, and an escaped-name symbol is also created. In this case, the children are removed from the original-name symbol, so it doesn't render anything to the screen; a mysterious, silent failure.
    Steps to reproduce bug:
    1. Create a library symbol named "|", save an xfl with flash pro CC, and close.
    2. Open, save, and close with flash pro CS6.
    3. Open, save, and close with flash pro CC.
    Results:
    A library symbol named "&#124".
    Expected results:
    A library symbol named "|".
    I submitted this bug with the bug form, and also with adobe bugbase (in case it isn't obsolete) - I'm just trying to maximize my chances of getting a fix.  Has anyone else encountered this bug?

    Hi,
    We are aware of this issue and its open for investigation internally. This issue is observed when you have certain special characters in your symbol names and try to open that file in Flash CS6. This happens due to a change in the way symbol naming is handled in Flash CC and in Flash CS 6.
    As a workaround, request you to use only Underscore or Hyphen as special characters while naming symbols or library layers etc.
    We shall update you as soon as this has been fixed.
    Thanks,
    Nipun

  • Can't install Flash Pro CS6

    I have 5.5 MacBook Pro 13 running 10.7.4.
    I am trying to install Flash Pro CS6 Trial .. this error appears in the beginning of the installation process (when the progress bar is around 1%) :
    Exit Code: 34
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 0 error(s), 0 warning(s)
    FATAL: Payload '{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.98.0' information not found in Media_db.
    Any ideas how to fix that ?
    p.s. i did restart, closed all apps, etc, etc ..

    Do you meet the minimum specs:
    Multicore Intel processor
    Mac OS X v10.6 or v10.7
    2GB of RAM (3GB recommended)
    4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024x768 display (1280x800 recommended)
    Java Runtime Environment 1.6
    DVD-ROM drive
    QuickTime 7.6.6 software required for multimedia features
    Which Intel Processor do you have? Early Intels won't cut it.

  • Flash Pro CS6 to HTML5 Conversion

    I purchased Flash Pro CS6 yesterday and it does not convert my Flash file to HTML5 Correctly.  It converts everything except the Action Script.  I have contacted Tech Support and they have escalted the issue, but they are telling up to 96 hours.
    The website is www.davidhornbrook.com
    When I try to convert that page (the FLA file) it converts the bottom part, his logo, and the david dropping down the side.
    It does NOT convert the top menu items OR hte drop shadow behind the logo (which is all Action Script3).
    Can someone help me?
    I have the FLA files thast I can send to you / post if that helps.
    BTW when I convert it to SWF it works fine, just not when I export it to HTML5.

    Hello ChadXSO,
    The 'Help' offered to you so far has been, as far as I can tell, no help at all.
    I've been ploughing through an old .fla trying to make a conversion.
    Nothing complex, no animations.
    6 hours later, I've part of it running, not working, just not crashing.
    It's all script, so if CreateJS doesn't convert Action Script it's producing a very good pretense of doing so. The converter does appear to be looking at the AS, since if I change the AS the output changes.
    However, I have to edit the js, every time I publish, to prevent the HTML from looping. From time to time it throws a Line 77 error, claiming that there is an undefined .str in a non-existant .jsfl file (non-existant in that Windows can't find the file).
    I produce technical anims for my students in Flash so I'm none too pleased for the option for them to view them on-line to be taken away.
    Unless Adobe produces a working conversion tool 10 years of my work is going down the toilet. There will be thousands(?) of .swf creators in the same position.
    If CreateJS is the best Adobe can manage, at this rate, I won't live long enough to convert a single .fla.

  • Flash Pro CS6 fails to load

    Flash Pro CS6 loads and suddenly disappear while "loading fonts".  I found similar discussions, and their solution suggests to find fontinfo.txt and edit it, but i fail to find the fontinfo.txt but found a missfont.map.
    Help needed, thanks in advance..

    Hi,
    The fontinfo.txt file can be found at:
    C:\Users\«YourUserName»\AppData\Local\Adobe\Flash CS6\en_US\Configuration
    Firstly, let me know if you are able find the fontinfo.txt file at the said location. Secondly, if you manage find it, empty the .txt file, save as Read Only (you need to ENABLE this option, not Disable as in your post), and then try restarting Flash.
    Please see if it works for you. These are steps as described in the forum discussion Ned referred, and I would request you try these to see if the issue still persists.
    Regards,
    Suhas Yogin

  • Flash Pro CS6 crashes when creating symbol

    Okay...here's one I gotta share. I'm building some banner ads for a client. I open up Flash Pro CS6. I create a square on the stage. And when I right-mouse click on the drawing, choose Create Symbol...Flash completely locks up. I get that little Windows 7 'tink' in my speakers..and nothing. I cannot create a symbol of any kind. The program completely locks up.
    So...I uninstall the entire CS6 suite...reinstall with latest installers...and same result.
    BUT....if I put a graphic on the stage...go to the timeline...and try to apply a motion tween..flash alerts me that it needs to be a symbol and converts it to a movie clip for me...no errors.
    I'm on Windows 7, 64 bit, 16 G ram. So that ain't the problem. I tried in vane to get somebody on the phone at adobe....I knew that would be a waste of time.
    I've been using adobe software forever. And though it is frequently error and crash prone I can usually count on an uninstall squaring things away. Not this time. And I have no cause and effect to point to. I was using Flash a couple of weeks ago no problem...and now...unusable.
    If there's anyone out there reading this post...I'd really be interested in a solution.

    The only thing that could´ve changed are the settings on my mac...
    Sounds like this might be your trouble?
    I run a pc... no help to you.
    Optimizing for performance: Adobe Premiere Pro and After Effects
    http://blogs.adobe.com/aftereffects/2011/02/optimizing-for-performance-adobe-premiere-pro- and-after-effects.html

  • Lost cd for student edition flash pro cs6

    lost cd for student edition flash pro cs6, will "student serial" work with ADOBE's download/retrieve programs page?
    Thanks all

    Yes it should work, make sure to download correct version and language.
    Download CS6 products

  • Can I download a trial of Flash Pro 5.5 or earlier for Mac?  I can't support CS6.

    Can I download a trial of Flash Pro 5.5 or earlier for Mac?  I can't support CS6.
    Looked everywhere and can't seem to find it.

    Please follow the steps below to download Flash Pro CS5.5 for MAC :
    1. Navigate to Flash Pro CS6 downloads page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=flash
    2. Sign in  with your Adobe ID.
    3. Copy and paste the following link on the address bar and hit enter :
    Adobe Flash Professional CS5.5 English Mac
    http://trials2.adobe.com/AdobeProducts/FLPR/11_5/osx10/FlashPro_11_5_LS1.dmg
    4. Save the file.
    5. Run the .dmg file to start the installation.

  • Flash Pro CS6 & CreateJS - Prevent looping

    I've recently upgraded to Flash Pro CS6 because of the toolkit for CreateJS.  I've already successfully exported a few simple, slide by slide animations.  I was surprised to see them working in all modern browsers, not just Firefox and Chrome.  The only issue I have is that there doesnt seem to be much ActionScript support.  I'm trying to have my frames play through once, without looping through infinity.  I've tried seaching the API for an equivalent to stop(); but diddn't find anything.  Is there a built in funtion for this, or should I be using another API like jQuery?

    If you want to stop the main timeline looping there's a checkbox in the toolkit publish settings.
    If you want to stop individual clips then you can use js
    /* js
    stop();
    see http://www.adobe.com/devnet/createjs/articles/using-flash-pro-toolkit-createjs.html for more info

Maybe you are looking for