Debugging skips breakpoints ?
I am running Change Material Doc (tcode MB02) and creating a message output. I entered the output type (WA03) and language (EN) it run a Sapscript form (WASCHEIN) using driver program SAPM07DR. I have put breakpoints in SAPM07DR in all open forms and also in the form routine entry_wa03 and the execution does not stop at any of the breakpoints but still generates an output spool.
How do I debug this code ?
Desparately seeking help.
TIA.
Edited by: NewComer on Dec 20, 2007 12:22 AM
Hi,
Wecome to SDN.
The driver program for the output gets triiggered in background and hence you do not see the control stopping at the output.
What you can do is to go to the output screen.
Go to further options.
Chose the dispatch option as send with periodically scheduled job.
Then save the document.
Put the break point in your driver programs.
Go to se38 and run the RSNAST00 program.
GIve the Material Document number in the Object value.
Then it will stop at the breakpoint.
Alternatively, you can try to toggle the check box for system debugging in debugger to ON. and try issue the output. I haven't tried this but it may worth a try.
Regards,
Ravi Kanth Talagana
Similar Messages
-
[Adobe Flash pro CS5/CS4] Debugger skips breakpoints
When I try to debug my app, debugger skips breakpoints, otherwise it works ok. I tried putting breakpoints in various project files and it doesn't catch a single of them. And yes, I checked "permit debugging".
Looking forward for a solution, because I just can't debug with trace() function.If you use timelines (ouch) you can get seamless video or audio loops. Although I imagine you may be doing some transforms on the sound and I myself would rather keep everything in code. But I have still to this day had very little luck with seamless looping via code-only. But the compression Flash does is no different at all than you batch compressing down all those audio files using Adobe Media Encoder.
It's not hard and will save you tons of memory. Just duplicate your full quality audio folder so you have them save. Make a MP3 preset in Adobe Media Encoder with your desired mp3 settings. Drag the folder you want to have better compressed versions and apply the preset to them. Bonus points if the folder is in the same location you initially imported from because you can just select all audio and hit update in flash and you're done. File size should drop drastically. Then while you have the audio still selected you can hit properties and tell them all NOT to compress on export so it'll use the compression you already did (in a cleaner way). Then your export time will drop significantly and your filesize will too. Your memory issue should be gone and flash should be stable.
Let me know if you want me to test exporting. I doubt I'll have an issue but unfortunately all that can tell you is either your Flash is acting up (8GB should be WAY more than enough), or you really somehow are running low on ram. -
Debugging skips a PERFORM command pointing to an implicit program
Hi Gurus
Can anyone tell me why does the debug skips a PERFORM command pointing to an implicit program, (such as in the following line of code)?
PERFORM SPEZIAL_DD_RANGES_AENDERN IN PROGRAM (LIS_PROGNAME) IF FOUND.
In fact, when debugging the main program, the runtime environment will not point to LIS_PROGNAME even if the program is found (which is the case). Instead it will skip it.
Thanks
Nuno NatividadeIf the program in the variable LIS_PROGNAME is the system program, than you have to do the SYSTEM debugging.
Put a breakpoint on the PREFORM
In the debugging start the System Debugging by:
Settings > System Debugging
Now, do single Step (F5).
Regards,
Naimesh Patel -
Debug Trace/Breakpoint Facility
Is there a trace facility where you can see rules as they fire. I'd like to be able to set breakpoints when debugging rules to figure out why that specific rule path is being taken. I'm trying to detect why rules that should be firing aren't.
The visualization diagram looks right, but the rules aren't firing.
Thanks,
TerryHi there,
I did try to use this approach, but, from what I can tell, I see the results after the rule has fired. I want to trap it at the point that a common rule is going to fire, look at the data at that point and that will tell me why the path that was taken was taken. When you have a lot of rules, reviewing the data results isn't very easy. Somehow, highlighting the values that changed with the last rule would be nice. Or do you do this and I don't know how to trun the feature on?
The data may have changed if I look at it after the wrong rule has fired.
Since OPM is figuring out what the next rule to fire is, which is entirely logical to OPM but seems haphazard to me at times, I may not be sure what that prior common rule is.
I guess I'd like to see a diagram of the agenda that shows what rules have fired with access to the data/rules that got me to this point and what rules will fire depending on the answers to the next question to be asked. Am I asking for an interactive decision path to help me figure out where I am and how I got here? I think yes.
I've been going back to visualization diagrams to help me figure out where my rules have gone wrong.
Terry -
I'm working on a JPDA based debugger and I'm finding that when I step over a function that contains a breakpoint I don't recieve a breakpointevent. jdb does hit the breakpoint in the same situation, and I've looked at the source code for jdb from the provided examples and I can't see what is really different.
The only big difference I can see is jdb suspends all threads by default, while I only suspend the thread that hit the breakpoint. I don't think that should make any difference though.
I know the breakpoint is placed succefully by my debugger since resuming the thread does cause the breakpointevent to be recieved. I also know that the function is being called when I step as it still outputs what is should.
Does anybody have any idea what I'm doing wrong that I'm not getting the event?Just an update for anyone who happens to hit the same problem.
I found that when executing the debugged program with oldjava.exe rather than java.exe the problem went away. I presume it has to do with Hotspot VM optimising away the breakpoint by accident but I haven't really put that much effort into figuring out exactly what is happening. -
hai i am using ecc6 and when i am going in debugging mode it is going into exclusive session even after prgram exectuion the debug session is on , is there any setting so that once the proram executed the debug session closes
thanx in advance
reagrds
afzalHi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<<br /> Less than
<=
Less than or equal
=
Equal
<>
Not equal
>= Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull -
How to debug the abap program ?
how to debug the abap program ?Can anybody explain me in details.
Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull -
Ways of debugging standard program
ways of debugging standard program to find out the solution!
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull -
ABAP server proxy-External Debugging
I have a server ABAP proxy implementation in a R/3 where i m sending message from XI,
I want to debug the the ABAP Proxy using External debugging (http breakpoint),
Pls tell me if it is mandatory to:
1. login in R/3 (for debugging) using the same user, which is used by XI proxy adapter,
2. the user should be a dialogue user.
Is it OK to use this debugging in a production environment ?Hi,
1. login in R/3 (for debugging) using the same user, which is used by XI proxy adapter,
A. Its not like that you will have login details like user name and password for R/3 and also for XI
2. the user should be a dialogue user.
A. No i dont think so.
Is it OK to use this debugging in a production environment ?
A.Never do this. If something goes wrong in production system entire business will stop.But i dont thing you have production system details like username and password.
Please reward points if it helps
Thanks
Vikranth -
I am not seeing traces in the xsengine trace log; nor am I able to effectively set breakpoints in the Web Editor and stop page processing. I'll start by defining roles and configuration, describing actions that aren't working, and then finish with 2 questions.
ROLES AND CONFIGURATION
According to the developer guide, the following configuration and roles need to be in place for tracing and debugging to work. This is our current role state:
User assigned Debugger role
To change Trace level, user assigned TraceAdmin role
User assigned TraceViewer role, child role of Developer
To view tracing, confirm the following configuration. This is our current config state.:
In the xsengine.ini file, the debugger > enabled node is set to true
In the xsengine.ini file, the httpserver > developer_mode node is set to true
ACTIONS
To start tracing, set the Trace level for your package, e.g., debug. Include a trace call in the code, e.g., $.trace.debug("testing debug trace"). In the Web Editor, run the xsjs file, and in the resulting browser window, click the Call Backend button. Here is where my issues begin: there is no Call Backend button, in any browser version.
To start debugging, set breakpoints in the Web Editor by clicking the line number. A breakpoint is indicated by a red arrow on the line number. Then run the page. The page should stop processing at that point. (You can also set breakpoints in Hana Studio by running in Debug perspective, and setting a debug configuration. I tried this also, but was unable to create a desired configuration for port 443; this is a separate issue, outside the scope of this discussion.)
QUESTIONS
What am I missing in setting up tracing?
What am I missing in setting up debugging?
Thanks in advance for any guidance.
BillKrishna,
Thank you for your response. Running breakpoints in the Hana Studio debug perspective has its own set of challenges for us. The web server is using ssl, and thus is set to port 443, rather than port 80(server instance number). I have not been able to successfully create a configuration for running xsjs scripts through Hana Studio. But I'll keep trying.
Bill -
Hi there,
How can I step into web dynpro component while debugging a process?
Regards,
Ricardo GiacominHi
1.Enable remote debugging(external breakpoint) on function module
2. Use same UserID that enables debugging and used in JCo Connection.
3. Run your application, it will take you to SAP GUI screen when breakpoint found.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30 -
I am trying to set a breakpoint on a source file I have inside a JAR sitting in my project's WEB-INF/lib directory. Its corresponding compiled class is also in the same JAR. I set the breakpoint by opening up the jar within Jdev's archive viewer. From there, I opened the source file and set the breakpoint. When I debug, the breakpoint is never hit when I know it should be. I also have this JAR file listed in the sourcepath of the project settings. My class in the jar was compiled with the debug="on" attribute of the Ant compile task. I am using Jdev 9.0.4.0 (Build 1419). Is it possible to do what I am trying?
Standard java cannot use a jar that is within another jar. You could write your own classloader, or look at a product named "onejar".
Here is a tutorial that shows you how to package a NetBeans project so it can be executed outside of NB.
http://www.netbeans.org/kb/articles/javase-deploy.html -
THrough dynpro i am not able to debug backend function module
Hi,
In my scenario i am uploading one file through dynpro application and store it at backend(sap r/3). In this scenario first i copy file from ep application server to r/3 application server and then send file dms server where i store that file. I make function module which copy file from ep application server and send it r/3 application server and further it store it dms server.
I checked with function module it was working fine in backend but when i am call fm in my application it would not work,
I could not able to debugg it also.
Please provide if i miss any thing .
Regards,
Gurprit BhatiaHave you fulfilled following list:
1. Enbable remote debugging(external breakpoint) on function module
2. Use same UserID that enables debugging and used in JCo Connection.
3. Keep open the SAP GUI screen
4. Run your application, it will take you to SAP GUI screen when breakpoint found.
Thats all, hope this will help.
Jawed Ali
Edited by: Jawed Ali on Aug 27, 2008 10:42 AM -
Calling VI through VI server with Debug Option
Hi All,
I am building application in which I have my own operator Interface (Application.exe(source code is in VI Server. I) which is a exe built using LabVIEW in which i am basically calling another VI(Test call)through VI server concept. When run the operator interface i want the Test call to open in debugging mode(Breakpoint, Probe etc).How to run Calling VI from Development Mode can anybody have suggestions.
Please find the source code and exe.
Testcall.vi is calling VI.
VI server.vi is operator Interface.
Application.exe in build folder is the exe.
Regards,
Satya
Attachments:
VIserver.zip 133 KBI'm sure there is a better way to do this, but here is what I do...
For the VI that I am calling, I place a breakpoint at the start of its code, save it, and close it. Then I run the VI that calls that VI. When the breakpoint is hit the called VI's block diagram will pop up and it will be paused.
Does that help? -
How to use abap debugger and se80
can any body give easy deatils about it?
Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Maybe you are looking for
-
Copy/Paste/Clipboard Problem; Pastes only as SVG Code
I have Illustrator CC installed, as well as Illustrator CS6, running Windows 7 x64, latest patchlevel. When I try to copy and paste objects in Illustrator CC, I always get a SVG code. I draw a simple rectangular, copy it, paste it, it's not pasted as
-
Hi Nice new look! Anyway, I have been recieving a load of WMV and I have WMP 9 installed (which I believe is the latest version) However, when I play the movies it states that it doesn't recognise the format. This happens on all movies (I assume rega
-
Install and Configure Oracle client in Fedora core 3
Hi guys I am raghu , I need a help regarding Oracle client installation in Fedora core 3 can any one guide where to get oracle client and installation steps Thanks Raghu
-
Technical name for formula in query designer
Hi, We have created some formulas in Query Designer. We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled. Is there a way to assign technical names of the formulas cre
-
Why my program does not run on?
I am writing a java project, a little big, to analyze a forum. The tasks I have to complete are: *(1) Register all threads (the post begins a new thread just like this post) existed in the forum during a period of time (for example 2 weeks) in the da