Debugging WPMA transaction to find out hw idoc gets populated!

Hi Experts,
                      in the transaction code WPMA , an idoc WP_PLU02, get populated. Current requirement is to find out hw does the segment e1wp11 gets populated. Is there any short cut,, becasue this proces uses several standard programs and perform routines ,, after which it generates the idoc,,,,, so is there any special technique to find that out???
Regards,
Arnab.

Hi,
Can you explain how you found out the way IDocs are populated?
Regards,
Karen

Similar Messages

  • Debug ME22N transaction to find out the message class

    Hi All,
    I want to know the best way of debugging for the following process:
    Create ME22N
    went to item level account assignment and selected the cost center.
    Got an error message in the status bar
    I wanted to find out where the message class is used in the background program
    Any help is appreciated.
    Thanks

    Hi,
    Take the message id and message number from the error message..
    Go to SE91..
    Give ID and display..
    Choose the message number..
    Press the where used list button..It will show all the programs that is using this message number..
    Thanks,
    Naren

  • How to find out the Idoc number triggered for any material transfer frm SAP

    Hi Folks,
    Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
    Do we have any navigation for that in MM03?
    Thanks,
    SPMD.

    Hi Shabbirmdpasha,
    If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
    Also would suggest to post the same in abap forums for more answers:
    ABAP Development
    Regards,
    ---Satish

  • How to find out the IDOC number(urgent)

    hello every one,
    i had recived all the data to BW from R/3 but the request is still running in the system
    for this <b>i need to manually release the IDOC for BD87</b>
    can any one please help me <b>How to find out the Idoc Number in R/3 and In BW for the particular load</b>
    Regards
    Sandy

    hi Siva,
    thanks for ur valuable answer,
    it is showing IDoc num for the succeeded one....
    my present error is Data pack 1 got error and Datapack 2 was success,
    their 3IDocs are their in detail tab all are success
    as per my knowledge it will for the Data pack 2 and it is showing 3different
    how can i find the Idoc which was struck .....
    that need to process manually in BD87..
    please suggest if i am wrong
    Regards
    Sandy

  • I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me.

    I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote.  There isn't one. I sure would appreciate help if someone knows a solution.  My first post - hope I did this right.

    if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
    in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
    hope that helps?
    rgds Lee.

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

  • I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

    I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

    If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
    Download a free trial or buy Adobe products | Adobe downloads

  • Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

    Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
    pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

    No Clipboard, no copy & paste, as you would not get the full information of the image.
    When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
    Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

  • I have lost my registration code and I cannot find out how to get it back...

    Can some one help me find out how to get my registration code back? I have been Googling many different places and I cannot seem to find a place to get it back. It would be much appreciated...
    Thanks,
    Nire Inicana

    Hi,
    You can just register again to get the registration code for VS.
    Or  you can find Visual Studio product keys using the Windows Registry:
    For 32 bit Windows:
    visual studio 2010
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\10.0\Registration\PIDKEY
    visual studio 2013
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0\Registration\PIDKEY
    For 64 bit Windows:
    visual studio 2010:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\Registration\PIDKEY
    visual studio 2013:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\12.0\Registration\PIDKEY
    Notes:
    Data is a GUID without dashes. Put a dash ( – ) after every 5 characters to convert to product key.
    If PIDKEY value is empty try to look at the subfolders e.g.
                ...\Registration\1000.0x0000\PIDKEY
                  Or
                ...\Registration\2000.0x0000\PIDKEY
    Best Wishes！
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • How to find out the idoc type required for our requirement

    Hi,
         How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
    Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
    Points will be given for the useful answers
    Thanks,
    Prasanna

    Hi prasanna,
                    we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
    For example we want idoc type for account invoice receipt.
    First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
    Get this message type and search in we82  where we can find message type and idoc type linkage.
    try this way.
    Reward if it is usful.
    Thanks,
    Srikanth.A

  • Transaction to find out the authorised transactions for a user

    Hi Abap Gurus,
    Could you please suggest any transaction which can be used to find out the authorised transcations that can be executed for a particular user?
    Points will be rewarded.
    Regards,
    Mansi.

    Hello,
    I think there is no separete Tcode to find it out.
    You need to check the Profile of the user.
    Use the Tcode SU21 also.
    Regards,
    Vasanth

  • Debugging: How can I find out what fires "Login-prompt"

    Hello!
    I'm writing an applet which reads 2 files on the server. The files are
    "above" .htaccess, and I don't have to enter username/password to read them.
    However, I DO get promptet for u/p when the applet loads. How can I possibly find out what generates the login?
    I have tried:
    1. modifying the .htaccess
    2. chmod 777 every file
    3. different approaches to reading the urls
    4. System.out.println("problem fired") on every possible location.
    to no use. I can't correct the problem when I don't know where it is.
    Can someone give me a hint to how I can find the event that fires the login-prompt.
    TrondA

    are the HTML page or codebase of the applet under the .htaccess ?

  • Trying to find out how to get the smallest value in a 2-D array

    I figured out how to get the largest and smallest in a 1-D array, but I'm having trouble with the for loop for the 2-D array
    I can't seem to figure out how I can get it to check every element in the 2-D array
    Lets say I have this array
    int[][] aRay = new int[][] {{ 1, 2, 3} , {4, 5, 6 }};and I want to find the smallest value, I think I can figure out what goes in the box of the for loop I just need help with how I can check every element..
    Thanks all

    Ok so here's what i've got so far and my brain is starting to hurt,
    My output right now is "2".. i'm almost there :/ aren't I?
    public class bladddhd
         public static void main( String [] args )
         int[][] aRay = new int[][] {{ 1, 2, 3} , {4, 5, 6 }};
              int length2 = aRay[0].length;
              int temp = 0;
              for(int i = 0; i < aRay.length; ++ i)
                        if(aRay[0] > temp)
                             temp = aRay[0][i];
                        for(int j = 0; j < length2; ++j)
                                  if(aRay[1][j] < temp)
                                       temp = aRay[1][j];
                   System.out.println(temp);

  • The internet updated without me knowing and now i can not pull tabs down to make a new window or change the order of tabs and i can't find out how to get back

    my mozilla updated without acknowledging me first. I open it and I come to find out I can not move the tabs over to the right or the left one spot or two spots they just won't move unless I close them. I use to be able to move there anywhere i wanted or pull down and it became it's own window. Now I have to right click to make it a new window and then I can't drag and drop other tabs into it to make a window with several tabs. How do I get this back to the way it was before?

    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?
    ''Note: on the new menu, Help is the ? icon toward the bottom.''

  • HT203163 I appear to have transferred to the US store and cannot find out how to get back to the UK store- can you help ?

    I have managed to get into the US store and cannot work out how to get back to the UK store - can you help?

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311
    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

Maybe you are looking for