Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

Similar Messages

  • Idoc Error: Could not find code page for receiving system

    hi,
    I am facing the following error while processing Idocs.
    ERROR: Could not find code page for receiving system
    Diagnosis
    For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

    Hi,
    I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
    If this helps you really award me the points.
    ~Katty

  • Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17: Error: Could not find a match for std::_Tuple_impl 0, unsigned&& ::_Tuple_impl(std::tuple unsigned&& , unsigned) needed in std::tuple unsigned&& ::tuple unsigned, void (unsigned&&).

    I think I downloaded the latest Solaris Studio version.  When I compile my code, I got the following error:
    bash-3.00$ gmake -f Makefile.sun
    CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
    CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
    ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
    "metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
    "metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
    Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
    "/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
    "/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
    "/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
    1 Error(s) and 2 Warning(s) detected.
    gmake: *** [metadata.o] Error 2
    with the same code, It can be compiled with g++ on Linux platform.
    1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
    2 Do we have any workaround for this issue?
    3 When will the final 12.4 release  be available?

    I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
    The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement.

  • 12.4 Beta, Error: Could not find a match for std::_Tuple_impl 0, std::string && ::_Tuple_impl(std::tuple std::string &&

    Hi,
    would you guys say code that compiles fine without -std=c++11 should also compile *with* -std=c++11?
    raider@sol112_x86:/tmp $ CC -V
    CC: Sun C++ 5.13 SunOS_i386 Beta2 2014/06/17
    raider@sol112_x86:/tmp $ CC buggy.cc  
    raider@sol112_x86:/tmp $ CC -std=c++11 buggy.cc         
    Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&>, std::string ) needed in std::tuple<std::string &&>::tuple<std::string, void>(std::string &&).
    "/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<std::string &&>::tuple<std::string, void>(std::string &&)".
    "/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<std::string>(std::string &&).
    "/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
    1 Error(s) detected.
    raider@sol112_x86:/tmp $ cat buggy.cc
    #include <map>
    #include <string>
    typedef std::map<std::string, std::string> StrStrMap;
    int main(void)
        StrStrMap dict;
        dict["bug"] = "feature";
        return 0;

    C++11 is approximately a superset of C++03. If you write in the common subset, the code will compile in any mode. For example, a basic hello-world program
    #include <iostream>
    int main() { std::cout << "Hello, world!\n"; }
    will compile and run as C++98/03, as C++11, as C++14, and I'm sure will also work with the next standard, planned for 2017.
    But if you use syntax or library types and functions that are new in C++11, the code will not compile as C++03.
    In my previous post, I might have sounded too negative about compiling C++03 code in C++11 mode. If you have a C++03 program that is intended to be portable, and that works with different compilers on different platforms, chances are good that it will continue to work in C++11. The chances are very good that only minor modifications will be needed.

  • Error: Could not find a match for... ?

    Hi,
    I am trying to compile some code using Studio 10/11 which appears to compile cleanly using a bunch of different C++ compilers (xlC, aCC, VC, g++) but is failing using the C++ compiler in both Studio 10 and Studio 11 with:
    "test.cpp", line 18: Error: Could not find a match for MKGeomT::getDistanceSquared<MKGeomT::_DIM, MKGeomT::_TYPE>(const MKGeomT::Segment<MKT::Dim2, MKT::Double>&, const MKGeomT::Point<MKT::Dim2, MKT::Double>&, MKGeomT::Point<MKT::Dim2, MKT::Double>*, double*).
    "test.cpp", line 23: Error: Could not find a match for MKGeomT::getDistanceSquared<MKGeomT::_DIM, MKGeomT::_TYPE>(const MKGeomT::Segment<MKT::Dim3, MKT::Double>&, const MKGeomT::Point<MKT::Dim3, MKT::Double>&, MKGeomT::Point<MKT::Dim3, MKT::Double>*, double*).
    Any ideas on how to get this to compile would be appreciated.
    test.cpp:
    /opt/SUNWspro/bin/CC -library=stlport4 -c test.cpp
    #include "all.h"
    namespace MKGeomT
    template < class DIM, class TYPE >
    double getDistanceSquared(Segment < DIM, TYPE > const &segment,
    Point < DIM, TYPE > const &querypt,
    Point < DIM, TYPE > *closestpoint,
    double *param)
    { return 0.0; }
    template double getDistanceSquared < MKT::Dim2 > (Segment2 const &segment,
    Point2 const &querypt,
    Point2 *closestpoint,
    double *param);
    template double getDistanceSquared < MKT::Dim3 > (Segment3 const &segment,
    Point3 const &querypt,
    Point3 *closestpoint,
    double *param);
    all.h:
    // a.h
    namespace MKGeomT
    template < class DIM, class TYPE > class Point;
    template < class DIM, class TYPE > class Segment;
    template < class DIM, class TYPE >
    double getDistanceSquared(Segment < DIM, TYPE > const &segment,
    Point < DIM, TYPE > const &point,
    Point < DIM, TYPE > closestpoint /= 0*/,
    double *param = 0);
    template < class DIM, class TYPE >
    inline double getDistance(Segment < DIM, TYPE > const &segment,
    Point < DIM, TYPE > const &point,
    Point < DIM, TYPE > *closestpoint = 0)
    return 0.0;
    // b.h
    namespace MKT
    class Dim2 { public: enum { NUM_DIM = 2 }; };
    class Dim3 { public: enum { NUM_DIM = 3 }; };
    class Float { public: typedef float  Stor_t; typedef double Calc_t; };
    class Double { public: typedef double Stor_t; typedef double Calc_t; };
    } // end of namespace MKT
    // c.h
    using MKT::Dim2;
    using MKT::Dim3;
    using MKT::Double;
    namespace MKGeomT
    template < class DIM, class TYPE >
    class PointBase
    template < class DIM, class TYPE > class Point;
    #if 1
    template < class _TYPE >
    class Point < Dim2, TYPE > : public PointBase < Dim2, TYPE >
    template < class _TYPE >
    class Point < Dim3, TYPE > : public PointBase < Dim3, TYPE >
    #endif
    typedef Point < Dim2, Double > Point2;
    typedef Point < Dim3, Double > Point3;
    } // end of namespace MKGeomT
    // d.h
    namespace MKGeomT
    /*! The Segment is a geometry class storing a segment in 3-D. Things
    like the segment vector and length are cached behind the
    scenes so subsequent retrieval is a no-op. */
    template < class DIM, class TYPE = MKT::Double >
    class Segment
    template < class DIM, class TYPE >
    double getDistanceSquared (Segment < DIM, TYPE > const &rkSeg0,
    Segment < DIM, TYPE > const &rkSeg1,
    double* pfSegP0 = 0,
    double* pfSegP1 = 0);
    template < class DIM, class TYPE >
    double getDistanceSquared2(Segment < DIM, TYPE > const &rkSeg0,
    Segment < DIM, TYPE > const &rkSeg1,
    double* pfSegP0 = 0,
    double* pfSegP1 = 0);
    typedef Segment < MKT::Dim2, MKT::Double > Segment2;
    typedef Segment < MKT::Dim3, MKT::Double > Segment3;
    thanks,
    k.m

    Never mind, I see that you intended to include b.h, c.h, and d.h in all.h.
    Many compilers do not look at template code until the code is instantiated. This code consists only of declarations, with little that can be instantiated. It's possible that other compilers would also complain about this code if they got to the point of processing all the template declarations.
    Can you add some instantiations along with template definitions and a main function so that the code can be compiled and linked?

  • BW Monitor error  Could not find code page for receiving system

    Hi All,
    Frequent BW Monitor error  - Could not find code page for receiving system
    I checked SM59 and every setting is fine there. Any other possibility ?
    Regards
    Srinivas

    The log updated in the status tab was:
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.

  • Error could not find file/pathurl for id file::QTMRead

    Hi,
    I'm very puzzled as to this error I have gotten on multiple projects when trying to check back out.
    Error could not find file/pathurl for id file::QTMRead
    I'm halfway through a project with a deadline of next week, and have been using edit proxies, so am just worried about being able to export the final project if the Server cannot find the file.
    It seems to get this error after a glitchy upload where the server locks up and I have to force quit. Has anyone had this message before/have any ideas how to solve it?
    Some speedy help would be very much appreciated.
    Thanks,
    Dania

    You need to make sure that you imported the Reports.xml file into the FDM application. Also, you will want to login to the application using the workbench client and click on the Reports tab and expand the English > Check Reports and right-click on the check report and choose "Set as Validation Report".

  • EHSM - Create Vendor - error: 'Could not find a document for the given key'

    Dear all,
    In the Chemical Approval Process I have attached a SDS document to the Approval Request. You can assign a Vendor to the SDS. As there are no (EHSM) Vendors currently available in the system I would like to create a new (EHSM) Vendor by clicking on 'Create Vendor'.
    This will lead me to the following Webdynpro Application: Edit Vendor (EHFND_UI_VENDOR_OVP).
    Only one field is shown in the Webdynpro named: 'Name of the Vendor'. After typing a name e.g. 'test', the following error message appears; 'Could not find a document for the given key'. See also attached document. This issue looks like a missing number range, however I could not find a EHSM number range for Vendors.
    How to solve this issue?
    More information:
    Software Component: SAP EHS Management (EHSM) Support Package: 3
    Process: Chemical Approval
    Webdynpro application: EHFND_UI_VENDOR_OVP
    Thank you.
    Kind regards,
    Roy

    Hi
    babooraj
    This might be a problem with Windows Power Shell.
    The solution is to copy the folder: "PSWorkflow" from "C:\Windows\System32\WindowsPowerShell\v1.0\Modules\"
    to "C:\Windows\SysWOW64\WindowsPowerShell\v1.0\Modules"
    Than everything works fine.
    Ps.: @Microsoft, please fix this problem in future versions.
    Thomas van Veen

  • Error "could not find code page for receiving system"

    Hello Everyone,
    We are trying to load data and receive the message:
    Could not find code page for receiving system
    We have searched notes and this forum and can't find anything.  We also checked WE20 and could not find anything wrong.
    Can someone please elaborate specifically what this error is and where to fix it?
    Thanks so much.
    Colleen

    I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem.  Here is the resolution that is stated in note #613389 (it's not very clear in the note).
    - Language “EN” must be specified in sm59
    - Under Special Options -> RFC Bit Options
    Make sure that “Use Found Communication Code Page” has a check mark.
    Once this was done, the data loads started completing successfully.

  • Javah error: could not find class file for 'com.ntv.ndkjni'

    Hi,
    My project directory  : C:\ndkJNI
    My java file directory : C:\ndkJNI\src\com\ntv\ndkjni
    My package name    : com.ntv.ndkjni
    1 ) I entry command prompt at C:\ndkJNI\src\com\ntv\ndkjni
    2 ) Javac test.java and create test.class succesfully. test.class is in  C:\ndkJNI\src\com\ntv\ndkjni folder.
    3 ) Later I used Javah, try below javah variously
         a)  javah -classpath C:\ndkJNI\src\com\ntv\ndkjni test
         b)  javah -classpath C:\ndkJNI\src\com\ntv\ndkjni.test
         x) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni com.ntv.ndkjni.test
         y) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni com.ntv.ndkjni test
         c)  javah -classpath C:\ndkJNI\src\com\ntv\ndkjni com.ntv.ndkjni.test
         d)  javah  com.ntv.ndkjni.test
         e) javah  com.ntv.ndkjni test
         f) javah  com.ntv.ndkjni test.class-> (error: exception in a thread illegal argument exception)
    I am searching  for 5 day. I couldnt find solution. I try different computer. I tried ubuntu and win8, the error still with me.
    Thats interesting when I delete the package com.ntv.ndkjni; from java file,  then create class file again with javac then javah can create header file succesfully.
    Please help me.
    *****************************test.java**************************
    package com.ntv.ndkjni;
    public class test {
      static
      System.loadLibrary("hello");
        public static native int toplama(int sayi1,int sayi2);

    javah takes a fully qualified class name so in your case that would be
    com.ntv.ndkjni.test
    As with all things related to java the class path is used to resolve the class based on the fully qualified name.  The name resolves STARTING at the path and then attempts to find the class BELOW the classpath by resolving the name.
    Because of that your class path should be the following
    C:\ndkJNI\src

  • Idoc failed in Bi system "Could not find code page for receiving system".

    Dear Experts,
    i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
    All the idocs have been successfully posted except one which is giving this error
    Idoc status 02 - could not find code page for receiver system.
    Please guide me
    thanks
    vamsi

    Hello Vamsi,
    check Note 647495 - RFC for Unicode ./. non-Unicode Connections
    If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
    Please check this thread - IDoc error - Could not find code page for receiving system
    Hope it helps,
    Thanks & Regards,
    Amit Barnawal

  • Reinstall OS x "could not find installation information for this machine"

    Early 2011 MacBook Pro upgraded (on-line) from Lion to Mountain Lion.
    Going to Rocovery Console (Command+R) during startup and choose "Reinstall OS X".
    Clicking Continue in  OS X Mountain Lion  window, clicling contionue in
    "To download and restore OSX, your computers'elidgilibility will be veryfied with Apple"
    and got error:
    Could not find installation information for this machine.
    Contact AppleCare.
    Well, when I retirn from the office, AppleCare is not working anymore.
    Any idea what to do?
    Thanks.

    Singapore ISP  Singtel is having issues with Apple Internet Recovery.
    There is a need to add proxy access via port 8080.
    Since I can't even get into Recovery mode, this info doesn't help.
    So, I call up Apple hotline and explain the whole picture.
    Was fortunate that Apple has similar feedback from Singapore user.
    So, was told to just bring down Mini to service provider.
    Problem solved some what.
    Service provider only reinstate the ori OS X Lion.
    Back home, I download and install ML.
    This time, made a copy of ML installer in USB stick for future usage.
    I guess the only way around this is getting someone to just install Lion or ML, if Internet recovery doesn't work.

  • Error: Could not find compiled resource bundle 'components' for locale 'en_US'

    We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4.  Most of the conversion appears to be working fine, with one exception.  When I launch the Flex4 version, all my data interchanges with the server works.  Just as it is about to show the UI, the following error occurs:
         Error: Could not find compiled resource bundle 'components' for locale 'en_US'
    I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed.  If I look in
         ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
    I see a lot of swc files, and of course no 'components.swc'.  I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason.  I think this is mostly from our in-house UI library.  The properties for that library (and for my main app I am testing now) have:
         - Use default SDK (currently "Flex 4.0")
         - Use Flex 3 compability mode
         - Use minimum version (Flash Player) required by the Flex SDK
         - Enable strict type checking
         - Enable warnings
    I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior.  This project is built by the following script:
    ruby scripts/concat_properties.rb -o resources.properties ^
         src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
         src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
         src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
         ../../scout/common/src/locale/fr_common/mypals/resources.properties
    mxmlc -locale=fr_FR -source-path=. ^
         -compatibility-version=3.0.0. ^
         -static-rsls=true ^
         -include-resource-bundles=resources ^
         -output src/main/resources/bundles/mypals/fr_fr_resources.swf
    copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
         bin-debug\bundles\mypals
    What have I missed???

    You have two posts. I will try to answer each completely.  Second one first. You say I should change my build to include the framework resources.  I am afraid I am not sure which and what to do there.  We combine all our properties file into one large one, then use the following build line:
    mxmlc -locale=fr_FR,en_US -source-path=. ^
         -compatibility-version=3.0.0. ^
         -static-rsls=true ^
         -include-resource-bundles=resources ^
         -output src/main/resources/bundles/mypals/fr_fr_resources.swf
    I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add?  The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files.  I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change.  I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
    ====================
    For your first message, I did a search for 'spark' in the entire project.  It only existed on 3 lines, each at the start of css files:
        @namespace s "library://ns.adobe.com/flex/spark";
    I had put those in based on reading needed changes to naming in CSS.  Since I was not actually using any spark ('s') components yet, I removed these lines.  The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
    I did a search for "s:" throughout the project.  That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object").  No reference to any s: object.  (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
    Note that when I first reported this problem, the compiler was set to ONLY support fr_FR.  In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for.  We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc.  Each language is a separate node on our server, so there is no need to mix & match at runtime)
    The console shows a lot of swf loads that I do not understand...
    The console output shows (my comments after ==> indicator)
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
                 ==> our locale is set here, after the above load and before the next line
    Look for name file at: ./data/fr_fr/names.csv
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
    Loaded 2278 names.       ==> indicates successful load of data retrieved from server
    Loaded 154 bad words     ==> our second data set has been retrieved and loaded
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
        ==> not sure what this next warning means.  I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
    Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml.  The 'secure' attribute is only permitted in HTTPS and socket policy files.  See http://www.adobe.com/go/strict_policy_files for details.
    Resource bundle loaded for locale fr_fr  ==> at this point, we appear to have our French assets loaded successfully
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
    [Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf  ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
    ==> everything looks fine up to here.  This is then when the third call to installCompiledResourceBundles occurs
    Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
        at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
        at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
        at mx.core::FlexModuleFactory/installCompiledResourceBundles()
        at mx.core::FlexModuleFactory/docFrameHandler()
        at mx.core::FlexModuleFactory/docFrameListener()

  • Windows 7 64-bit Installation Error "Could not find appropriate listener"

    *11.2.0.1* Installation fails on Win7 Professional 64-bit
    1) Installed software (did not create database initially)
    2) Create Listener via Net Config (no apparent problems here)
    3) Added DB to Listener via Net Mgr
    4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
    My Listener services is started.
    All current updates have been applied to Win 7.
    I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
    C:\Users\scott_hp>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
    :11
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 09:47:07
    Uptime 0 days 0 hr. 29 min. 7 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
    etwork
    \admin\listener.ora
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "mmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully <gphmh>
    Edited by: svk1965 on Feb 20, 2012 7:17 AM
    Edited by: svk1965 on Feb 20, 2012 7:22 AM

    svk1965 wrote:
    FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
    C:\Windows\system32>lsnrctl stop
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
    :24
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
    The command completed successfully
    C:\Windows\system32>lsnrctl start
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
    :51
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
    Log messages written to c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\al
    ert\log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 0 min. 5 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    C:\Windows\system32>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
    :30
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 2 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Services Summary...
    Service "mmmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance.

  • Error: could not find source for resource bundle charts

    I am trying to upgrade from Flex SDk 3.4 to 3.5.
    I have copied the Data Visualisation SWCs under libs, locale and rlsls folders as suggested by adobe.
    I get the following error when building the application
    flex-library:
         [java] Loading configuration file /usr/local/lib/flex_sdk/3.5.0/frameworks/flex-config.xml
         [java] Error: could not find source for resource bundle charts.
         [java]
    What am I missing? Any help is highly appreciated.
    Thanks

    Copying
    /Software/FB\ Eclipse\ Plugin/Adobe\ Flex\ Builder\ 3\ Plug-in/sdks/2.0.1/frameworks/locale/en_US/charts_rb.swc into
    the 3.5 SDK directory
    /usr/local/lib/flex_sdk/3.5.0/frameworks/locale/en_US
    solves the problem.
    Not sure why as the charts_rb.swc comes from Flex 2.0

Maybe you are looking for